Home»ELECTRIC BOARDS»Electric LONGBOARDS »12FiFties Longboards»STICKIES Longboard Wheels »12FiFties ORRSOM Electric STICKIES Longboard - TWIN CUSTOM

Sonnies latest!

ORRSOM Longboard - Concave & Multi mountable having 3 Ride height positions, ORRSOM!!

TRAMPA's ORRSOM Longboard has been specifically designed to dock perfectly with TRAMPA's range of extra wide Longboard Trucks, 12Fifties are fitted with 9.525mm Axles & the even wider 14Fifties Longboard trucks are fitted with 12mm axles) of which both Longboard Truck options assemble harmoniously to the deck & give the user 3 different ride heights to match the 3 different wheel sizes that can fit to this Deck!! To make one board to be able to fit 3 different wheel sizes is ORRSOM!!

•Available in 3 flex ratings,
   14ply - FLEXI 
   15ply - FIRM
   16ply - STIFF

•supplied smothered from tip to tip in hard waring JESSOP Grip tape & of course a TRAMPA Deck would not be a TRAMPA deck if is was not supplied with a Marine Grade Stainless Steel Bolt Kit to connect the trucks with! ORRSOM!!

•Measuring 985mm tip to tip & 230mm at its widest point the ORRSOM deck is trimmed with 5º of negative camber around the edges.

12Fifties - CNC Precision made Extra Wide All Terrain Longboard Truck

TRAMPA's Super Sexy 12FIFTIES Extra Wide Longboard Trucks are absolutely fabulous! CNC precision shaped from a solid Block of T6 Aluminum, the 50º Mounted Hanger measures 12.5 Inch wide & is fitted with 9.525mm (3/8ths of an inch) Hardened Steel axels which means the EXTRA WIDE Longboard Truck will accommodate every wheel in the TRAMPA product range from 83 or 90mm STICKIES Longboard WHEELS, 125mm GUMMIES Longboard Tyres & The Amazing 6.5 Inch URBAN TREADS Tyres! 

Being 12 Inch wide & Mounted at 50º the 12Fifities Extra Wide Longboard trucks are named after around dimensions. The Extra Wide Longboard Trucks provide high speed stability & the opertunity to add Pneumatic tyres, which beings a complete new ride experience when riding the rough roads that around us, cruising over cracks in the pavement is glorious!

TRAMPA STICKIES Longboard WHEELS 83 or 90mm x set of 4

TRAMPA's incredible range of STICKIES Longboard Wheels have taken the world of Longboarding by storm! Produced using the highest grade of Ultra Premium Urethane, and available in either 83 or 90mm size options with a varying range of suitably colour co-ordinatied Urethane Hardnesses, the variety compliments all the different types of rider, covering all the different aspects of street riding. You will be pleased to learn STICKIES Longboard Wheels will fit to ALL Longboard, Street-board & Skateboard Trucks using 8 or 9.525mm Axles.

The re-enforced VENTED CORE of the STICKIES Wheel houses a Center-set bearing position. For those that don't know this means the bearings are housed centrally within the wheel. Being center-set ensures an even wear rate to the wheel ensuring maximum grip at all times, whilst guaranteeing a balanced "high speed spin-rate", thus making turning/sliding as predictable as possible! Not only does the vented core reduce weight, but it also increases airflow around the Bearings ensuring lower operating temperatures when running at high speeds...

The Vented Core also has an extra application... The Venting holes can be used in conjunction with a centering ring & some M4x40mm Socket Capped Bolts to lock into position, either a 33 or 37 Tooth Slave Wheel, to which the complete assembly can be connected to many applications using an electric motor, including the new TRAMPA Electric Longboards & Electric Street-Carver boards as well as many other products due onto the market soon!

Smothering the Vented Core of the STICKIES Longboard wheel is thick PREMIUM URETHANE. Choosing STICKIES will enable you to Carve & Turn like you have only ever dreamed of before, especially when mounted to the new TRAMPA Mini Spring Trucks which happen to turn & carve like nothing else! STIKIES Wheels will also fit to the new 12FIFTIES Trucks & all 8mm Longboard trucks on the Market.

The edges of all the STICKIES wheels are beautifully rounded allowing smooth transitional turns, whilst helping to avoid chipping & cracks at the same time. The rounded edge of the STICKIES wheel gives an overall contact surface of 50mm! Orbiting the outer edge of the BLUE STICKIES WHEEL is a coordinating BLACK TRAMPA logo.

STICKIES will accept regular skate size 608 2RS (8 x 22 x 7mm) bearings & made special for the TRAMPA Mini Spring Trucks, the R6 2RS (9.525 x 22,225 x 7.14mm) Bearings. All of TRAMPA's Longboard/Streetboard bearings are ABEC 7-9 rated & are designed for prolonged high speed use. 

ORRSOM LONGBOARD Underboard Battery Tray 63cm long CNC precision mounting holes - With Battery Bungs & all fixings for TWIN Motor Longboards

TRAMPA’s Under-board battery tray is a sleek & stealthy cell-storage solution.

Made from the same super-strong (secret), material used for TRAMPA DECKS, this battery tray keeps everything secure & protected.

Designed to work in conjunction with the amazing ORRSOM ELECTRIC LONGBOARD

 At 630 x 200 x 24mm, this tray can fit 6x 2s 10000mAH HRB Cells - and still have room for single or twin VESCs! That’s a lot of GO-power in one tray!

With precision CNC’d T6 End Bungs, rubber grommets & a tidy foam seal, you can be confident that everything precious inside will be well protected from the elements

VESC HD-60T TWIN

We are proud to introduce a new member in the world famous VESC speed controller family! 

We gave it the name VESC HD.  It is the abbreviation for High Density, referring to the ultra compact design. The HD project started almost 2 years ago & we took our time to bring it to perfection. 

Certainly the Power to size ratio is the key feature of the TWIN VESC HD. Measuring just 100mm x 55mm x 18 mm the TWIN Motor capable VESC HD-60T is a true space saver!

The HD-60 range of Speed Controllers has even more to offer & is capable of hibernating... Your board can conserve power while not in use - reducing power consumption to just 20μA – less than the self-discharge rate of the batteries. Or with automatic power off, your VESC can switch itself off after a set amount of time. Kickstart or Roll to start allows you to wake up the unit, without the need of finding the switch to turn it of so giving the wheels a gentle push is all it takes. 

Compatible with power buttons that we offer, the HD can be ready to go with a single press / flick / kick!

In its development, due to their tendency to eventually blow up after a certain period, no Mosfet switches were used in this production. This saves on the additional costs of replacing them, & also adds to the longevity of the VESC HD.

The TWIN HD-60 is a modular design, consisting of a twin logic stage & two separated power stages. Both channels operate as independent, redundant units, so that a damage on one channel does not take down the second channel. Also you will find all ports twice, giving you more freedom to interconnect secondary devices & it certainly is adding to the redundancy effect. 

The modular design makes the device very repairable if electronics get damaged. Mishaps happen & we want you to get your device up & running again quick & without buying an entire new unit. Spare PCBs will be available at a reasonable price tag going forwards.

As expected, this mew VESC features THREE PHASE SHUNTS & adjustable VOLTAGE FILTERS - detecting any motor attached more precisely and reliably than ever before. Consequently all kinds of motors now run as smooth as butter & react PERFECTLY LINEAR to throttle input commands. 

The HD is ASS Ready. Ass stands for Advanced Sensor less Startup, which basically means full torque from 0 RPM. ASS is a future SW/HW feature, not to be confused with HFI. We want you to know that the device is already prepared for the future! 

You’ll also find a new IMU chip fitted - featuring a gyroscope & accelerometers... The VESC  knows its 3D orientation position in space & 3 axis acceleration values....

UAVCAN has been added to the VESC  firmware allowing you to interact with commonly used flight controllers like the PIXHAWK ®* devices. The HD is perfect for bigger drones & other UAVs!

VESC-Tool is now available as an Android™ compatible App, allowing you to configure your VESC or VESC array with only a few clicks. User specific PROFILES will let you change in between different setups with a single tap on the fly. 

Spec sheet TWIN HD 60

- Power per channel: 100A, up to 75A continuous, 160A absolute max 
- 60V rated including any voltage spikes (12S LiIon)
- 3 shunt design
- Ports: 2x SWD, 2x USB, 2x COMM, 2x CAN, 2x PPM, 2x SENSOR
- 2x XT60 power connectors
- 5V and 3.3V supply for external devices
- Suppports ABI, HALL, AS5047, TS5700N8501
- ASS Ready (Advanced Sensor less Startup = Full Torque from 0 RPM)

Dimensions TWIN HD: 101 x 55 x 18mm

Weight: 225g

Features

- Current and voltage measurement on all phases (three shunt design)
- Adjustable voltage filters
- built in IMU chip (accelerometer, gyro)
- Regenerative braking
- Traction control (single and twin setup)
- Sensor'd or Sensor less operation + hybrid mode
- ASS Ready (Advanced Sensor less Startup = Full Torque from 0 RPM)
- Configurable RPM-, current-, voltage- and power limits
- Input source: PPM, Analog,
- Communication ports: USB, CAN,UAVCAN, UART
- Throttle curve and ramping for all input sources
- Separate throttle curves for acceleration and brakes
- Seamless 4-quadrant operation
- Motor revolution, amp hour, watt hour counting
- Display of speed, power, duty cycle, amp flow, estimated range and battery status on App
- Accumulated data from arrays of VESCs
- Real time data analysis and read out via communication ports
- Real time data analysis and read out via VESC-Tool APP or VESC-Tool software
- Adjustable protection against:

• Low input voltage
• High input voltage
• High motor current
• High input current
• High regenerative braking current (separate limits for the motor and the input)
• High RPM (separate limits for each direction).
• Over temperature (MOSFET and motor)

12FiFties Carbon Fiber Motor Mount Panel with Axle support & Clamp - TWIN

TRAMPA's 12-FIFTIES Motor Mounts have been designed to be ORRSOM! With breath-taking performance, offering 13-15 tooth gearing options on the motor side & harmonious gearing to match on the slave wheel, there are endless setup options for all kinds of rider & terrains.

Using premium carbon mounting panels & T6 aluminium Truck connectors, the finished motor mounts have an amazing strength-to-weight ratio.

Whether you set up with 83 or 90mm STICKIES Longboard wheels, 125mm GUMMIES Longboard wheels or the 165mm URBAN TREADS pneumatic Tyres, 12FIFTIES Longboard trucks mount at 3 different heights, allowing a variety of wheels to fit.

This simple motor mounting kit is as versatile as they come - working flawlessly with our 12-FIFTIES Longboard Trucks, as well as other brands’ trucks and wheels, and a huge variety of motor & pulley sizes.

Essentially, this kit is the barebones of your motor system - giving you the freedom to pick, choose, and customise what your final product will be!

The Motor Mount Connectors snuggly slide over the truck hanger and are secured tightly with MARINE GRADE M6x10mm grub screws. The Premium Quality Carbon Mounting Panel is sandwiched tightly between the Motor Mount Connectors, & is fitted with a support for long motor axles. The Motor Axle Support houses a precision 608 bearing, supporting axle rotation & ensuring the motor is as secure & efficient as possible. The Motor Axle Support will only work with motors that have longer axles - such as TRAMPA’s very own 118kv or 136kv Brushless Motors.