This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

DEEP-DISH MEGASTAR 8 Wheel - CUSTOM 8 inch Tyre

DEEP-DISH MEGASTAR 8 Wheel - CUSTOM 8 inch Tyre DEEP-DISH MEGASTAR 8 Wheel - CUSTOM 8 inch Tyre DEEP-DISH MEGASTAR 8 Hub - Fits Pneumatic tyres up to 8 Inches in outer diameter. 8x 3.75 x 2.5 Inch DEEP-DISH MEGASTAR 8 Wheel - CUSTOM 8 inch Tyre DEEP-DISH MEGASTAR 8 Wheel - CUSTOM 8 inch Tyre DEEP-DISH MEGASTAR 8 Wheel - CUSTOM 8 inch Tyre DEEP-DISH MEGASTAR 8 Wheel - CUSTOM 8 inch Tyre DEEP-DISH MEGASTAR 8 Wheel - CUSTOM 8 inch Tyre DEEP-DISH MEGASTAR 8 Wheel - CUSTOM 8 inch Tyre DEEP-DISH MEGASTAR 8 Wheel - CUSTOM 8 inch Tyre DEEP-DISH MEGASTAR 8 Wheel - CUSTOM 8 inch Tyre TRAMPA's 8 Inch Tyre measure 3.75x 2x 8 200x50mm with 3.75 inch Rim fits too all 3.75 inch Hubs & 3.75/4 inch Rims DEEP-DISH MEGASTAR 8 Wheel - CUSTOM 8 inch Tyre 8 Inch Regular Inner Tube made by PRIMO - 200x50mm
RRP FROM
£75+

How to put a wheel on an Infinity or Vertigo truck

How to put a wheel on an Ultimate Truck

M4 x 40mm Socket Capped TORX Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 45mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special Bolt is specifically made for TRAMPA & is used to assemble the TRAMPA PHATLADZ HUBS. The socket capped head of the Bolt screws neatly though the Spokes & into the fixing point in the Rim, eventually screwing  into the M4 nut on the other side easly.

Weighing just 3 grams each, they are very lightweight, look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

M4 x 16mm TORX Socket Capped Head Bolt ISO 4762 Marine Grade Stainless Steel

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M4 Nyloc Nut - Marine Grade stainless steel Nylock Nut - Hub Nuts

Introducing TRAMPA's M4 (4mm Shaft) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M4 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to tighten to the M4 Socket Capped Bolts that hold the HYPA & SUPERSTAR hubs together. To fit the nuts M4 use an 8mm spanner or  8mm Ratchet Socket to turn the Nut onto the Bolt whilst holding the bolt with a 3mm Allen Key. Always ensure your Nuts & Bolts are tight before you ride!

8 Inch Inner Tube PRIMO 8x2 inch 200x50mm - fits 3.75 inch Rims & 8 inch tyres

PRIMO's own 8 Inch Inner Tube has dimensions of 200mm (outer diameter) x 50mm (width) & will fit into all known 8 inch Tyres & ATB hubs on the market!

The CST PRIMO Inner Tube incorporates slightly thicker rubber into its manufacture process which means the tube is slightly heavier than alternatives but does allow the rider to inflate slightly higherThis extra thickness also gives some extra resistance to punctures, but punctures suck, so always carry a spare inner tube when you are riding as you never know when you might get one.  

The PRIMO Tube uses a 90º Brass Inflation valve which will not rust on you & comes as you would expected with a plastic "anti dust" valve cap!

MEGASTAR 8 DEEP-DISH Rims Measure 3.75 x 2.5 Inch. The bearings are positioned OFF-SET widening the wheel base & accept all 3.75 Rim Tyres - GOLD

It was hard to ever imagine that TRAMPA's SUPERSTAR hub could ever be improved upon - but that's just what we’ve gone’n’done! The Super Sexy MEGASTAR Rims are a PRO version of the already amazing SUPERSTAR Rim!

CNC Milled from a solid block of T6 aluminium, polished, anodised (in 10 different colours!) & logo-ed up for a pimp appearance - all of the various MEGASTAR Rims we offer fit the regular SUPERSTAR SPOKES, so if you already use Superstars & fancy an upgrade, you’ll only need to purchase the Rims to make the swap.


MEGASTAR Hubs can handle the highest inflation pressures of any small wheel on the market. Increasing inflation rates ultimately increases maximum roll speeds, making these hubs the perfect option for the insane among us!

MEGASTAR Rims have extra threaded bolt holes for wheel balancing purposes -  the extra holes allow you to screw in 2x extra M4x16mm Socket cap TORX Bolts directly opposite the valve - which in turn counter-balances, creating a smoother rotation &  faster spin rate!


Megastars are available in a variety of sizes, with different spoke/bearing positioning for a number of different applications!


CENTER-SET Bearing position, which is a direct aluminium replacement of the original plastic-injection Superstar rim. Keeping the bearings centrally-located within the hub leaves the wheelbase unchanged, for a nimble feeling & riding board.

Megastar 8 CENTRE SET RIMS fit all 3.75x2 inch Rim Tyres & Regular Superstar / Skinny BB-Star Spokes.


OFF-SET Bearing position moves the wheels further from your feet - widening the boards wheelbase, which in turn increases stability - perfect for large people & small Boards. Initially created in conjunction with narrower Truck Models (12-Fifties & Mini Spring Trucks) in order to grant clearance for bigger tyres or rear-mounted battery boxes.

Megastar 8 OFF SET RIMS fit all 3.75x2 inch Rim Tyres & Regular Superstar / Skinny BB-Star Spokes.

Megastar 9 OFF SET RIMS fit all 3.75x2.5 inch Rim Tyres & Regular Superstar / Phat BB-Star Spokes.


DEEP-DISH Rims are as pimp as it gets! These elongated rims both widen the wheelbase of a board as well as the contact patch of the tyres - improving both stability & grip! While also granting extra clearance for fitting larger tyres or rear-mounted battery boxes.
 

Megastar 8 DEEP DISH RIMS fit all 3.75/4 x 2.5 inch Rim Tyres & Regular Superstar / Skinny BB-Star Spokes.

Megastar 9 DEEP DISH RIMS fit all 3.75/4 x 3 inch Rim Tyres & Regular Superstar / Skinny BB-Star Spokes.


The CENTER SET & OFF SET (3.75 x 2 Inch) MEGASTAR 8 HUBs fit ANY of the tyres in TRAMPA's range up to 8 inches in Diameter - including the 5 Inch Gummies tyres, 6.5 Inch URBAN Treads, 7 Inch Inline tyres & ANY 8 inch tyre option.

The DEEP DISH (3.75/4 x 2.5 Inch) MEGASTAR 8 HUB fits most tyres in TRAMPA's range up to 8 inches in Diameter, widening the tread & increasing the contact patch - including 6.5 Inch URBAN Treads, 7 Inch Inline Tyres & ANY 8 inch Tyre option.

The OFF SET & DEEP DISH (3.75/4 x 2.5/3 Inch) MEGASTAR 9 HUBs fit most of the tyres in the TRAMPA product Range up to 10 inches in Diameter, widening the tread & increasing the contact patch - including the 6.5 Inch URBAN Treads, 7 Inch Inline Tyres & ANY 8, 9 or 10  inch tyre options TRAMPA offers.


TRAMPA's REGULAR SUPERSTAR SPOKES are made from Extruded 6061 Aluminum (Super Strength Aero-grade quality) & comes in a range of colours to satisfy your taste.
TRAMPA’s new BB STAR Spokes are as lush as it gets - CNC’d from T6 Aluminium, available in two models - SKINNY (fits ALL MEGASTAR rims) or PHAT (fits OFF SET MEGASTAR 9 ONLY).

The MEGASTAR's hub construction is held together by using 5x Socket cap M4 x 40mm A4 (Marine Grade) Stainless Steel Nuts & Bolts that'll never rust on you!

Further pimp up your Megastar hubs with M4 Socket Cap spacers - anodised in 10 colours!

TRAMPA's MEGASTAR Hubs can be used in conjunction with any of the Pulleys that fit to SUPERSTAR hubs.

It's possible to fit any Bearing size TRAMPA offers into MEGASTAR Rims. As Standard the Superstar / Megastar spokes accept Mountainboard bearings for 12mm Axles - these bearings can be fitted with Reducer Sleeves that allow the hub to fit to 9.525mm Axles. If you use the Special Spoke Support Spacer into the assembly of the hub, you can fit to 8mm Longboard Axles - where hundreds of top quality bearing options are available to choose from.

BLACK Anodised CLASSIC 5 SPOKE - Extruded T6 Aluminum Heat treated & CNC Precision milled fits all SUPERSTAR & MEGASTAR Wheels

TRAMPA SPOKES fit all SUPERSTAR & MEGASTAR Hubs. TRAMPA's Spokes are produced using the finest 6061 'Aero-Grade' Aluminum, which to maximise strength & performance are produced with the use of an Extrusion Die, which means TRAMPA spokes are made in one continuous piece before being sliced like bread to the required thickness. Before being sliced the extruded profile is T6 Heat Treated making the resulting Alloy extremely strong

Once sliced the Raw Spokes are sent to the CNC machine to mill out the bearing housing perfectly. Before being anodised the spokes are bead polished which not only gives a top quality finish but also removes all & any sharp edges, then finally sent away to the Anodisers to have the relevant striking colours added for top surface protection.

Check your spoke support spacers, O-Rings and hardware are in good condition when changing spokes & ensure all of your nuts & bolts are tight before you ride!

 

CUSTOM Spoke Support spacer - Installing a Spoke Support Conversin Spacer allowsyou to fit SUPERSTAR or MEGASTAR hubs to 9.525mm & 8mm Axles such as Evolve, Boosted & many others

This is the TRAMPA SUPERSTAR Spoke Support Spacer. It is used to gain extra strength for the SUPERSTAR wheel design by adding support to the Aluminum Spokes when the wheel is being used under high inflated pressures...

Precision injection moulded, using original DuPont materials, this Spacer provides essential support for the Spokes in the Superstar hubs. There is a Deep Shelf on the Rim of the Spacer which pushes into the internal side of the Spoke, positioning the Spacer/spoke perfectly for assembly. The thick plastic ensures a very strong support platform maximising Bearing support & spin rate always....

Ensure all your nuts & bolts are tight before riding!!

TRAMPA's 8 Inch Tyre measure 3.75x 2x 8 200x50mm with 3.75 inch Rim fits too all 3.75 inch Hubs & 3.75/4 inch Rims

The PRIMO ALPHA Lite tyre is a super light-weight Off-Road Tyre. Using just 2 PR of the finest grade rubber & incorporating a very high TPI under its skin combined together these secret details reduce weight considerably, making its reputation as the worlds best Off Road 8-inch Tyre! When inflated the PRIMO ALPHA Lite tyre measures 200x50mm. The Tyre incorporates a 3.75 inch Steel Band into the rim to hold everything in position & it slips onto the TRAMPA hubs perfectly. The ALPHA tyre will fit to all known hub Brands that are used for Mountainboarding & Kiteboarding. 

Made from relatively softish rubber the ALPHA tyre gives fantastic grip. Its design incorporates a wide center bead to allow & maintain straight line speed, whist its surrounding edges are beautifully sculptured wide grooves that supply high levels of grip regardless of the terrain type. - This tyre really is great for all off road applications.

The more you inflate your Tyres the faster you will roll!  The official maximum inflation pressure set by the factory for the ALPHA Tyre is 50psi, but the ALPHA Tyres are made so well & the TRAMPA Hubs are so strong that our Crash test Dummies (I mean Team Riders) have been known to inflate these Tyres well beyond their recommended pressures with no problems to mention. Over inflating your tyres may lead to an explosion which could seriously injure you. If you do decide to go beyond the max inflation pressure ensure your nuts & bolts are tight & deflate back to a regular pressure after use.

TRAMPA's 8 Inch wheels now come with a few options but is predominantly tuned to give MAX efficiency when connected in the Motor Setup of a TRAMPA Electric decks, using a 14 tooth Motor Pulley accompanied with an 66 Tooth Slave Pulley. This combination is best all round gearing when using TRAMPA Electric MountainBoards - 
 
--------------------------------------

5 Spoke, 8 Inch tyre sized Wheels can also fit the 76 Tooth Pulleys... Fitting the 76 Tooth pulleys increases the Torque & Acceleration of the board incredibly, but also trims off your top speed as consequence...
 
--------------------------------------

.
1x MEGASTAR 8 DD Rims 3.75x 2.5 Inch - GOLD
2x CLASSIC 5 Spoke - BLACK
1x CUSTOM Spoke Support spacer
5x M4 x 40 Socket Cap TORX Bolt
5x M4 Nut - Marine Grade Stainless steel Nylock Nut
2x M4 x 16 Socket Cap TORX Bolt
1x TRAMPA's 8 Inch Tyre measure 3.75x 2x 8 200x50mm with 3.75 inch Rim
1x 8 Inch Inner Tube - PRIMO
Recommended Tyre Inflation from 40 - 100psi
Weight: 655g
What Colour 3.75x 2.5 Inch DEEP-DISH MEGASTAR 8 Rim do you want?
What Colour 3.75x 2.5 Inch DEEP-DISH MEGASTAR 8 Rim do you want?

DEEP-DISH MEGASTAR 8 Rim - BLACK
DEEP-DISH MEGASTAR 8 Rim - BLACK

DEEP-DISH MEGASTAR 8 Rim - BLUE
DEEP-DISH MEGASTAR 8 Rim - BLUE

DEEP-DISH MEGASTAR 8 Rim - BRONZE
DEEP-DISH MEGASTAR 8 Rim - BRONZE

DEEP-DISH MEGASTAR 8 Rim - GOLD
DEEP-DISH MEGASTAR 8 Rim - GOLD

DEEP-DISH MEGASTAR 8 Rim - GREEN
DEEP-DISH MEGASTAR 8 Rim - GREEN

DEEP-DISH MEGASTAR 8 Rim - GUNMETAL
DEEP-DISH MEGASTAR 8 Rim - GUNMETAL

DEEP-DISH MEGASTAR 8 Rim - PINK
DEEP-DISH MEGASTAR 8 Rim - PINK

DEEP-DISH MEGASTAR 8 Rim - PURPLE
DEEP-DISH MEGASTAR 8 Rim - PURPLE

DEEP-DISH MEGASTAR 8 Rim - RED
DEEP-DISH MEGASTAR 8 Rim - RED

DEEP-DISH MEGASTAR 8 Rim - SILVER
DEEP-DISH MEGASTAR 8 Rim - SILVER

Please select which 8 inch Stretched Tyres you would like...
Please select which 8 inch Stretched Tyres you would like...

8 Inch INLINE Tyres - BLACK (+£2.50)
8 Inch INLINE Tyres - BLACK (+£2.50)

8 Inch INLINE Tyres - GREY (+£2.50)
8 Inch INLINE Tyres - GREY (+£2.50)

8 Inch TRAMPA TREADS - HARD (+£2.50)
8 Inch TRAMPA TREADS - HARD (+£2.50)

8 Inch TRAMPA TREADS - SOFT (+£2.50)
8 Inch TRAMPA TREADS - SOFT (+£2.50)

8 Inch MUD-PLUGGER Tyres - BLACK (+£2.50)
8 Inch MUD-PLUGGER Tyres - BLACK (+£2.50)

8 Inch PRIMO ALPHA Tyres (+£2.50)
8 Inch PRIMO ALPHA Tyres  (+£2.50)

8 Inch PRIMO STRIKER Tyres (+£2.50)
8 Inch PRIMO STRIKER Tyres (+£2.50)

8 Inch DIAMOND TREAD Tyres (+£2.50)
8 Inch DIAMOND TREAD Tyres (+£2.50)

8 Inch SLICK-CUT Tyres - BLACK (+£2.50)
8 Inch SLICK-CUT Tyres - BLACK (+£2.50)

8 Inch SLICK-CUT Tyres - GREY (+£2.50)
8 Inch SLICK-CUT Tyres - GREY (+£2.50)

8 Inch GOLFA Tyre(+£5)
8 Inch GOLFA Tyre(+£5)

Quantity required:
We have enough parts to make…  
RRP FROM £75 - per wheel

Excluding VAT
HCC: 9503001000

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon