This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

OPEN BELT DRIVE Belt Tensioning System for 15mm or 20mm Belts

OPEN BELT DRIVE Belt Tensioning System for 15mm or 20mm Belts Belt Tension Roller Housing - CUSTOM 15mm or 20mm Longboard & Skateboard Bearings (8 x 22 x 7mm) Red Black Blue White or GREEN Ceramic sidewalls ABEC 7 608 Sprung Steel C-CLIP used inside the Belt tension housings to secure 608 bearing Step SPACER used for positioning the 15mm Tension Roller on OBD Drive M6 x 25mm Bolt -  Fixes Trucks to HolyPro Decks - Marine Grade Stainless steel with locking paste M6 Nut - Marine Grade Stainless steel Nylock Nut - Fixes Bindings & Trucks to Deck M6 Form C Washer Marine grade Stainless steel
RRP
£10+

TRAMPA's Universal Belt tensioning system houses a classic 608 skateboard bearing, held in position by a classic yet very simple E-Clip to be able to spin freely allowing the correct amount of free running tension to the belt over the pulleys, ensuring maximum contact with the belt to the pulleys, enhancing torque/power to the board at all times....

Belt Tension Roller Housing - CUSTOM 15mm or 20mm

Ensuring that belts are correctly tensioned and positioned is an important part of setting up and maintaining your board. A poorly tensioned belt is far more likely to snap or slip, both of which are highly undesirable when your belts are also your brakes!

Made from T6 Heat-treated Aluminium, these Belt Tension Rollers are to designed to house a premium TRAMPA 608 BEARING, ensuring a smooth and consistent roll while tensioning the belts. Used with 15mm belts on PRO BELT or OPEN BELT DRIVE, as well as MKII Urban Carve Motor Mounts.

Sprung Steel C-CLIP used inside the Belt tension housings to secure 608 bearing

Ensuring that belts are correctly tensioned and positioned is an important part of setting up and maintaining your board. A poorly tensioned belt is far more likely to snap or slip, both of which are highly undesirable when your belts are also your brakes!

These C-Clips ensure the 608 bearing is secure within the Tension Rollers

 

Step SPACER used for positioning the 15mm Tension Roller on OBD Drive

Ensuring that belts are correctly tensioned and positioned is an important part of setting up and maintaining your board. A poorly tensioned belt is far more likely to snap or slip, both of which are highly undesirable when your belts are also your brakes!

These Spacer-Axles have two functions, correctly positioning the 20mm Tension Roller, as well as providing the housed 608 bearing a snug-fitting axle to spin freely on.

M6 x 25mm Bolt - Fixes Trucks to HolyPro Decks - Marine Grade Stainless steel with locking paste

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

You’ll need 8 of the TRAMPA M6 x 25mm Marine Grade Stainless Steel Bolts & 8 of the TRAMPA M6 Stainless Steel Nylock Nuts to attach a pair of TRAMPA Skate Trucks to any TRAMPA Deck with Risers. You’ll also need a pair of 10mm ring spanners to tighten and loosen the Nuts & Bolts. Don’t forget to make sure you’re Nuts & Bolts are tight before you ride!

M6 Nut - Marine Grade Stainless steel Nylock Nut - Fixes Bindings & Trucks to Deck

Introducing TRAMPA's M6 (6mm Thread) A4 Grade Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M6 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M6 Bolts that hold the TRUCKS to the DECK for the HOLYPRO Decks & also for the countersunk bolts connecting the L BRACKETS TO the DECKs. Use an 10mm spanner or SOCKET for a Ratchet Driver to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

Longboard & Skateboard Bearings (8 x 22 x 7mm) Red Black Blue White or GREEN Ceramic sidewalls ABEC 7 608

TRAMPA's Longboard bearings will fit to all classic Longboard & Skateboard Wheels.

TRAMPA's Skate sized 608 Bearing (8 x 22 x 7mm) is internationally known as 608 2RS Longboard Bearing or Skateboard Bearing. It is the High Precision stock choice of bearing supplied with all TRAMPABOARDS that use 8mm Axles.

TRAMPA's 608 Skate Bearing has been polished to a an above genuine ABEC 7 quality rating & offers fantastic performance to the user. This Bearing will spin very fast for prolonged periods & it with regular servicing & a few drops of Speed Cream every now & then will last you a very long time. too. The internal Ball Bearings are mounted in a stainless steel raceway & are coated in very fine grease similar to the properties of Speed Cream.

As with all of TRAMPA's Bearings this Longboard Bearing has been fitted with Friction Free (contact-less) Removable Shields making servicing really easy. To Service your Bearings use a sharp knife or 'Pick' to carefully take out the Removable Sleeves from the bearing & clean/soak the bearings in a pot of Petrol or Thinners. Once clean, dry thoroughly & add a few drops of Speed Cream. A few drops is more than enough so don't go pouring loads in, the oil just needs spreading over all of the surfaces so pop them on the axle & give them a spin to spread the cream evenly & only add 1 more drop of Speed cream if necessary. Remember to wipe up any excess cream spinning out of your bearings onto your wheels as this will attract dust & dirt looking messy in turn.

& add a few drops of Speed Cream. A few drops is more than enough so don't go pouring loads in, the oil just needs spreading over all of the surfaces so pop them on the axle & give them a spin to spread the cream evenly & only add 1 more drop of Speed cream if necessary. Remember to wipe up any excess cream spinning out of your bearings onto your wheels as this will attract dust & dirt looking messy in turn.

TRAMPA's Universal Belt tensioning system houses a classic 608 skateboard bearing, held in position by a classic yet very simple E-Clip to be able to spin freely allowing the correct amount of free running tension to the belt over the pulleys, ensuring maximum contact with the belt to the pulleys, enhancing torque/power to the board at all times....

1x Belt Tension Roller Housing - CUSTOM 15mm or 20mm
1x TRAMPA 608 Skate Bearing
1x Sprung Steel C-CLIP for secures bearing in Belt tension roller
1x Step SPACER used for positioning tension roller
1x M6 x 25mm HEX Head Bolt - Marine Grade Stainless steel
1x M6 Nut - Marine Grade Stainless steel Nylock nut
1x M6 Washer Form C - Marine Grade Stainless Steel
Weight: 40g

The 5 Inch GUMMY & 6 Inch URBAN Tyres use smaller SLAVE PULLEYS that fit 15mm BELTS to make the system turn, so you should fit a 15mm BELT TENSIONER for these smaller wheel options (44 tooth for Gummy or 62 Tooth for Urban), where's the 8 & 9 inch tyres (Of which its only possible to fit 9 inch tyres when you use the 76T OBD Panel) connects to a SLAVE Pulley that has space to fit 20mm BELTS, so you should fit 20mm BELT TENSIONERs if your fitting these larger 8 or 9 inch sized Wheels

What SIZE Belt Tensioner do you want?
What SIZE Belt Tensioner do you want?

15mm Belt Tensioner - Fits 33,44, 62 & 66 Tooth Slave Pulleys

20mm Belt Tensioner - Fits 66 & 76 Tooth Slave Pulleys

What colour 608 Longboard Bearing do you want?
What colour 608 Longboard Bearing do you want?

BLUE 608 (8x22mm) Longboard Bearings x1
BLUE 608 (8x22mm) Longboard Bearings x1

BLACK 608 (8x22mm) Longboard Bearings x1
BLACK 608 (8x22mm) Longboard Bearings x1

RED 608 (8x22mm) Longboard Bearings x1
RED 608 (8x22mm) Longboard Bearings x1

WHITE 608 (8x22mm) Longboard Bearings x1
WHITE 608 (8x22mm) Longboard Bearings x1

CERAMIC 608 (8x22mm) Longboard Bearings x1 (+£2.50)
CERAMIC 608 (8x22mm) Longboard Bearings x1 (+£2.50)

Quantity required:
We have enough parts to make…  
RRP £10 - per set

Excluding VAT
HCC: 95069190

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon