This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

35° TRAMPA Carve Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Countersunk Bolt kit

35° TRAMPA Carve Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Countersunk Bolt kit 35° TRAMPA Carve Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Countersunk Bolt kit 35° TRAMPA Carve Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Countersunk Bolt kit 35° Original 9-69 Carve Deck Drillage for Trucks - Accurate and neat Edging of deck for a Regular Deck 3 Foot of 9 Inch Wide Jessop Grip Tape for Longboards 20mm Marine grade Stainless Steel Countersunk Bolt Kit - fixes Mini Spring Trucks to 14/15ply Carve Decks 370mm - Hand made TRAMPA Vinyl Sticker
RRP
£150+
schematic

flexometer

By altering the number of layers of material that we add into the mould, we are are able to tune the final performance of the TRAMPA decks relevant to the riders weight height & ability. Please use the FLEXOMETER above as a guide to help you choose the right ply board for you. TRAMPA's FLEXOMETER information is to be interpreted as a 'GUIDE ONLY' as there is no fixed rule as to which is the exact right deck for you. The weight, height & ability of the rider will all help determine which is the right sort of deck for you, but of course the most important factor is personal preference as to how the rider wants their deck to feel.... Some riders like it flexi, some like it firm, some like it very very stiff.... It depends on what you are doing on your board, i.e. freestyle, freeride, boarder-cross, altho there is guidance there is no right & no wrong just personal preference but when purchasing a deck from TRAMPA we want to make sure you get it exactly the way you want it! so if your stuck as to which one is the best for you them please drop as a line...

 

 


The 35° TRAMPA Street Carver deck is the latest deck in the TRAMPA range. It has been specifically shaped to work with the new Street Carver range of Truck steering systems. Choosing a low ply flexier deck makes carving on the street a fantastic sensation, whilst choosing a stiffer deck & adding DAMPA's into the Trucks tightens the steering turning the deck one of the fastest & most stable decks on the market!

The 35° TRAMPA Street Carver deck is available in 3 different flex rates, 14ply is the most flexible, 16ply is the stiffest. Please use the FLEXOMETER in the TAB ABOVE for guidance as to which is the most suitable ply deck for you or mail this link if you need some extra guidance. The 35° TRAMPA Street Carver deck is only supplied as Drilled, Edged & Sanded, Fully Gripped & with Marine Grade Stainless Steel Bolt Kit!

Regardless of which deck you choose, all TRAMPA Decks are totally Un-Breakable! We offer you a lifetime gaurantee! Our incredible composite material is so strong whilst still flexible, the material will not split, delaminate or break in any way regardless of the environment you use it in. TRAMPA decks are considered the "Poppiest" decks on the market, the performance is un-matched, you will fly higher & have more cushioned landings thanks to the performance of the deck! All TRAMPA deck's are customised to suit the riders weight, ability & personal preference.

The TRAMPA™  35 degree deck has been devloped to work in conjunction with spring steering truck systems. In order for the springs to steer at their optimum, they need to be mounted at 35 degrees.

Because we use only composite materials to make the TRAMPA decks there are only a few restrictions on the shapes we make, therefor we are able to make this angle a true 35 degrees giving the perfect mounting angle to gain the most from the truck.

The TRAMPA™ deck is made from a re-inforced glass and plastic thermo composite, which was originally developed for light-weight millitary purposes, giving superior strength to weight ratios. It is able to with stand huge impacts or forces & flex's like most other materials cant.

It is specially formulated, & presented in a workable matter in a thread like format, just like cotton. From there, we weave the thread to our desired width & place it onto a roll. Polished & pre shaped alluminium moulds are used to give the material the dimensions we require.

By varying the layer quantity used, we are able to control the amount of flex & pop in the deck, allowing us to custom make the deck for the customers height weight, style, rider type & riders abillity.

A special seal is used to help with the large pump to create a high pressured vaccume. The mould is then placed in the oven, still under a vaccume, to cook, just like a cake. At this point we refer to the resulting product as the Motherboard.

Once cooked the exterior moulds are removed & the motherboard is taken to the water jet cutting bed to neatly remove the individual decks from the motherboard. The datum marks are fed into the machine for accuracy & water is mixed with a very fine particle of sand which is then blasted out of the nozzell under a pressure of around 60,000 Psi. (thats enough pressure to cut through 9 inch titanium!) This high pressure results in a razor sharp precision finish to the edge of the deck :-)

The decks then need to be finished by hand... A jig is used to drill the truck, but the binding & grab handle fixing holes are measured & drilled by hand. Metal files are used to take away the sharp edge of the deck & they are then rubbed smooth with a block & various types sandpaper. The finer the sandpaper used the finer the finish to the edge of the deck will be.... spend some time on your deck, show it some love and give it a good rub.....

We can make the TRAMPA™ decks as stiff or as flexi as you would want it to be. Generally speaking the stiffer the deck is the heavier the rider is, so the weight of a TRAMPA deck is often relative to the weight of the rider, so lightweight isnt always the best thing as its important for the rider to know that their deck can handle their weight for the right applications.....

All TRAMPA™ blank decks are available drilled or undrilled, with or without grip tape, with or without converting nuts & bolts or any other extras you may need.

Back to Blank Decks

35° Original 9-69 Carve Deck

Measuring just 850mm in length, TRAMPA’s CARVER DECK is the perfect balance between being small enough to take on a bus, while still feeling substantial & stable under your feet at speed.

With 35° tips, Carve Decks have the same flex & ‘pop’ as TRAMPA’s MTB decks, making them the perfect ‘urban-board’ choice for Mountainboarders. Working in conjunction with Mini Spring Trucks, the resulting Carveboards have been described as “a whole new riding experience”.

M5 x 25mm TORX Countersunk Bolt

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M5 Nut - Marine Grade Stainless steel Nylock Nut - Fixes to Trucks & Bindings

Introducing TRAMPA's M5 (5mm Thread) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M5 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M5 Bolts that hold the TRUCKS to the DECK for all  Decks & also for the Dome Head Bolts connecting the L BRACKETS to the BindingsUse an 8mm spanner or Ratchet Drive to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

Recommended decks

Rider's weight Suggested deck Deck Weight Flex
51 - 89 kg
(8 - 14 stone)
14 ply 2,200g firm
64 - 114 kg
(10 - 18 stone)
15 ply 2,350g stiff
76 - 140 kg
(12 - 22 stone)
16 ply 2,500g very stiff
DECK WEIGHTS INCLUDE ALL HARDWARE & DECK ACCESSORIES

The 35° TRAMPA Street Carver deck is the latest deck in the TRAMPA range. It has been specifically shaped to work with the new Street Carver range of Truck steering systems. Choosing a low ply flexier deck makes carving on the street a fantastic sensation, whilst choosing a stiffer deck & adding DAMPA's into the Trucks tightens the steering turning the deck one of the fastest & most stable decks on the market!

The 35° TRAMPA Street Carver deck is available in 3 different flex rates, 14ply is the most flexible, 16ply is the stiffest. Please use the FLEXOMETER in the TAB ABOVE for guidance as to which is the most suitable ply deck for you or mail this link if you need some extra guidance. The 35° TRAMPA Street Carver deck is only supplied as Drilled, Edged & Sanded, Fully Gripped & with Marine Grade Stainless Steel Bolt Kit!

Regardless of which deck you choose, all TRAMPA Decks are totally Un-Breakable! We offer you a lifetime gaurantee! Our incredible composite material is so strong whilst still flexible, the material will not split, delaminate or break in any way regardless of the environment you use it in. TRAMPA decks are considered the "Poppiest" decks on the market, the performance is un-matched, you will fly higher & have more cushioned landings thanks to the performance of the deck! All TRAMPA deck's are customised to suit the riders weight, ability & personal preference.


TRAMPA's 35° Carver deck is the latest deck in the TRAMPA range. It has been specifically shaped to work with the new range of Mini Spring Truck Carve Steering Systems which when assembled to the TRAMPA Carve Deck combine to offer incredible performance, performance that's so good its never been experienced on the Streets before! The 35° Carver deck can be assembled in both Street & Urban Carve options depending on which way you setup your Trucks & wheel options

Pushing the springs in the Carve Trucks into the inside position (allowing for easy turns) & choosing a 'low ply flex'ier deck' makes carving on this deck an incredible sensation, bouncing on the turn in-between hardcore switch back carves turns steep roads into dream ride locations.... Whilst choosing a stiffer ply deck & adding DAMPA's into the Trucks, pushing the springs into the outside position, tightens up the steering enormously, turning the deck into possibly one of the most stable / high speed decks there has ever been!

The 35° TRAMPA Carve deck is available in 3 different flex rates, 14ply is the most flexible, 16ply is the stiffest. Please use the FLEXOMETER in the TAB ABOVE for guidance as to which is the most suitable ply deck for you & your weight or mail this link if you need some extra guidance from the experts.

The 35° TRAMPA Carve deck is only supplied as Drilled, Edged & Sanded, Fully Gripped & with Marine Grade Stainless Steel Bolt Kit!

Regardless of which deck you choose, all TRAMPA Decks are totally Un-Breakable! We offer you a lifetime guarantee! Our incredible composite material is so strong whilst still flexible, the material will not split, delaminate or break in any way regardless of the environment you use it in. TRAMPA decks are considered the "Poppiest" decks on the market, the performance is un-matched, you will fly higher & have more cushioned landings thanks to the performance of the deck! All TRAMPA deck's are customised to suit the riders weight, ability & personal preference.

In this Purchase you get the following items...
1x Original TRAMPA 35° 9-69 Carve Deck
1x Precision drilled Truck mounting holes.
1x Edged with a rough cut file & hand sanded until silky smooth...
2x 1x 10x10 Inch square Jessup Grip Tape
8x M5 x 25 Countersunk TORX Bolt
8x M5 Nut - Marine Grade Stainless steel Nylock Nut
8x M5 Washer Form B - Marine Grade Stainless Steel
1x 370mm - Hand made TRAMPA Vinyl Sticker
------------------------------------------
35º Carver Deck DImensions
Deck Widest Point - 218mm
Tip to Tip Deck Length - 846mm
Axle to Axle Wheel Base - 835mm
Tip Mounting angle - 35º (Mini Spring Trucks)


DECK OPTIONS

What Size deck do you require...?
What Size deck do you require...?

8.5-69 SOLID Carve Deck

8.5-69 HOLY-PRO Carve Deck (+£25)

9-69 Mountainboard Deck (+£45)

9-73 BigBoi Mountainboard Deck (+£45)

Quantity required:
We have enough parts to make…  
RRP £150 - per deck

Excluding VAT
HCC: 6815120000

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon