This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

14FiFties - 14.5 Inches wide & Mounted at 50º CNC Precision made Super Extra Wide All Terrain Longboard Truck with 12mm Axles to fit any TRAMPA Wheel!!

14FiFties - 14.5 Inches wide & Mounted at 50º CNC Precision made Super Extra Wide All Terrain Longboard Truck with 12mm Axles to fit any TRAMPA Wheel!! 14FiFties Extra Wide Longboard Hanger 355mm with 12mm HOLLOW Steel Axles TRAMPA 12 & 14Fifties Extra Wide Longboard Truck BASEPLATE Pivot cup for Trampa Skate Trucks TRAMPA 12Fifty Extra Wide Longboard Truck Baseplate ADAPTOR 12 / 14-FIFTIES Longboard Truck Kingpin 3/8ths Nut - Marine Grade Stainless steel Nylock HALF nut W3/8 - 24T UNF Custom Blood Orange Bushings Washer for skate truck Kingpin -  Oversize Wheel support spacer for all TRAMPA Wheels on 12mm ATB Axles - CNC precision 12mm x 16mm x 18.2mm Shim spacer - Bridges the tiny gaps between bearings on 12mm axles - 12 x 16 x 1mm 7/16ths Nut - Marine Grade Stainless steel Nylock Axle HALF nut (W7/16-20T UNF) - Fits to 12mm Axles
RRP
£125+

TRAMPA's Super Sexy 14FIFTIES 'Supa-Dupa' Extra Wide Longboard Trucks are absolutely fabulous! CNC precision shaped from a solid Block of T6 Aluminum, the 50º Mounted Hanger measures 14.5 Inch wide & is fitted with 12mm (7/8ths of an inch) Hardened  & Hollowed Steel axels which means the EXTRA WIDE Longboard Truck will accommodate every wheel in the TRAMPA product range from 125mm GUMMIES Longboard Tyres, the Amazing 6.5 Inch URBAN TREADS Tyres, 7, 8 & Even enough spae on the hanger to fit 9 Inch Wheels!!!

Being 14 Inch's wide & Mounted at 50º the 14Fifities 'Supa-Dupa' Extra Wide Longboard trucks are named after around dimensions. The 'Supa-Dupa' Extra Wide Longboard Trucks provide high speed stability & the ability to be able to use Pneumatic tyres, which beings a complete new ride experience when riding the rough roads that surround us, cruising over cracks in the pavement becomes glorious!

Custom Blood Orange Bushings

The TRAMPA DAMPA is a Urethane Elastomer that fits inside the Spring of a Truck. Its purpose is to support the Spring & give extra resistance during steering. Its clever design has three balls stacked & connected on-top of each other. The middle ball is slightly fatter than the outer two, during steering they all compress against each other giving greater feed back in your turns. This stacked design gives a fantastic progressive feel to steering.

By varying the SHORE DUROMETER (Rubber Hardness) strength of the Urethane mixture, we can control the amout of movement in the DAMPA. This in turn allows the rider to custom tune the resistance of their steering perfect to their requirements. The spheres of the DAMPA fit perfectly into the cup of the specially made TRAMPA SPRING RETAINER which is the part that locates & locks the Spring in the the TRAMPA SPRING TRUCKSand they instantly start to work with the slightest movement from the rider. TRAMPA DAMPA's work in harmony with the rider, supplying the perfect amount of steering resistance whilst eliminating all chances of speed wobble. Now available in 5 different steering resistance's for all levels of rider out there, Orange DAMPA's are for easy steering, whilst White DAMPA's are for the totally committed! 

Turning the Spring Adjuster clockwise pre-loads the tension in the Spring and Dampa. This can be adjusted on the fly to suit the terrain & conditions. Turning the spring adjuster too much will put pressure on the Dampa & eventually it may split. Rather than putting too much pressure into the Dampa, consider up-grading the Dampa to a harderShore Durometer as this will most likely increase your perfomace than overtightening a Dampa thats not stiff enough for you. Please use the table below for guide.

 

COLOUR

Stiffness

Shore

Suitability Guide

ORANGE

Super Soft

55

Light Riders / Crazy Carvers!

PINK

Soft

60

Beginner Carvers

YELLOW

Average

65

Beginner / Intermediate

GREEN

Average (75kg+)

75

Intermediate / Adult sized rider

RED

Firm

80

Advancing rider / Teenage Freestyler

BLUE

Stiff

85

Fast & Advanced Freestyle Rider

WHITE

Stiffest

90

For the Insane only!

3/8ths Nut - Marine Grade Stainless steel Nylock HALF nut W3/8 - 24T UNF

This very special Marine Grade Stainless steel Nyloc HALF NUT is custom made specially to fit the TRAMPA products. Half nut means - half as the size of a regular nut, so half the size = half the weight of a normal nut. By using Half nuts on the axles reduces the over all length of the axle & kingpin therefore reducing weight in the Truck also! A few Grams here & a few grams there soon adds up to quite alot & that makes all the difference to the total Truck & consequently deck weight, specially in critical areas of the deck such as the wheels area...

This very special 3/8ths of an inch Marine Grade Stainless steel Nylock Half Nut official factory measurements are  W3/8ths - 24T - UNF. This Nut is used to hold the wheels onto the axles of the 9.525mm (3/8ths of Inch or otherwise referred to as 10mm) SKATE TRUCKS & also the Spring Trucks fitted with TITANIUM axles. This Nut is also used to hold the KINGPIN in position on all Skate Trucks. The Nut is fitted as standard with the world renowned NYLOC System. The Nyloc "locks the Nut onto the Bolt" eliminating vibration, keeping your nuts tighter for longer!

Use a 14mm or 9/16ths of an Inch spanner to tighten the Nut onto the Axle or Kingpin, do not overtighten the nut, allow the wheel to spin freely but not rattle & do not crush your bearings. Being Marine Grade Stainless Steel this nut will not rust you! Always ensure all ur nuts are tight before you ride!

 - Fits to 9.525mm (3/8ths) Axles & Skate Truck Kingpins

7/16ths Nut - Marine Grade Stainless steel Nylock Axle HALF nut (W7/16-20T UNF) - Fits to 12mm Axles

This very special 7/16ths of an inch Marine Grade Stainless steel Nyloc HALF NUT is custom made specially to fit the TRAMPA products. Half nut means - half as the size of a regular nut, so half the size = half the weight of a normal nut.. By using Half nuts on the axles reduces the over all length of the axle & kingpin therefore further reducing weight in the Truck! A few Grams here & a few grams there soon adds up & makes all the difference to the total Truck & consequently deck weight, specially in critical areas of the deck such as the wheels area, where a few grams makes all the difference...

This very special 3/8ths of an inch Marine Grade Stainless steel Nylock Half Nut official factory measurements are  W7/16 - 20T - UNF. This Nut is used to hold the wheels onto the axles of the Spring Trucks fitted with 12mm axles. The Nut is fitted as standard with the world renowned NYLOC System. The Nyloc "locks the Nut onto the Bolt" eliminating vibration, keeping your nuts tighter for longer!

Use a 16mm or 5/8thths of an Inch spanner to tighten / loosen the Nut onto the Axle or Kingpin. Do not overtighten the nut & make sure the wheel can spin freely but does not rattle & do not crush your bearings. Being Marine Grade Stainless Steel this nut will not rust you! Always ensure all ur nuts are tight before you ride!

Wheel support spacer for all TRAMPA Wheels on 12mm ATB Axles - CNC precision 12mm x 16mm x 18.2mm

This special Spacer measures 12mm (id) x 16mm (od) x 18.2mm (long) & has 2 uses!. It is firstly known as the Bearing Support Spacer as this Spacer fits between the Bearings of a 6 Spoked HYPA Hub, (when mounting the HYPA wheel onto 12mm Axles) & secondly it is also known as the AXLE SUPPORT SPACER as this spacer is also used to position any of the TRAMPA wheels in the perfect position onto the axles of 12mm TRAMPA Spring trucks....

TRAMPA spacers are produced as one long tube. The Tube is Heat Treated to gain extra strength & is then Bead Polished to give the metal extra surface protection & a shiny best appearance. The tube is then cut to the exact length for precision mounting. 

Shim spacer - Bridges the tiny gaps between bearings on 12mm axles - 12 x 16 x 1mm

This little STAINLESS STEEL Shim Spacer is precision made. It ensures maximum performance to the wheels & nuts. Made from Marine grade stainless steel it will not rust on you! It is used to hold the bearings in the perfect position & also to bridge tiny gaps on the axles, ensuring an accurate fit with NO rattles!

The Shim spacer slips onto the Axle, fitting either side of the Bearings when the wheel is being fitted onto 12mm axles.

This tiny spacer positions the wheel perfectly on the axle, holding the Bearing in the best possible place to help achieve maximum spin rate for the bearing & wheel. Its little parts like these that suffer the most amount of abuse, especially when they are used in the harsh conditions that they are. Check from time to time they are in good order & possibly replacing them every now & then this good practice will ensure your board stays in tip-top condition, always!

TRAMPA's Super Sexy 14FIFTIES 'Supa-Dupa' Extra Wide Longboard Trucks are absolutely fabulous! CNC precision shaped from a solid Block of T6 Aluminum, the 50º Mounted Hanger measures 14.5 Inch wide & is fitted with 12mm (7/8ths of an inch) Hardened  & Hollowed Steel axels which means the EXTRA WIDE Longboard Truck will accommodate every wheel in the TRAMPA product range from 125mm GUMMIES Longboard Tyres, the Amazing 6.5 Inch URBAN TREADS Tyres, 7, 8 & Even enough spae on the hanger to fit 9 Inch Wheels!!!

Being 14 Inch's wide & Mounted at 50º the 14Fifities 'Supa-Dupa' Extra Wide Longboard trucks are named after around dimensions. The 'Supa-Dupa' Extra Wide Longboard Trucks provide high speed stability & the ability to be able to use Pneumatic tyres, which beings a complete new ride experience when riding the rough roads that surround us, cruising over cracks in the pavement becomes glorious!

Marine Grade Stainless Steel Nuts Bolts & Washers
Fits to - Fits to All Longboard Decks
1x 14FiFties Longboard Hanger 355mm with 12mm HOLLOW Steel Axles
1x TRAMPA 12 & 14Fifties Extra Wide Longboard Truck BASEPLATE
1x Pivot cup for TRAMPA Skate Trucks - Inspect & replace regular
1x TRAMPA 12Fifty Extra Wide Longboard Truck Baseplate ADAPTOR
1x 12 / 14-FIFTIES Longboard Truck Kingpin
1x 3/8ths Inch Axle Nut - Marine Grade Stainless steel Nylock HALF nut
1x Custom Blood Orange Bushings
1x Washer for skate truck Kingpin - Oversize
1x Washer for skate truck Kingpin - Oversize
2x ATB HOLLOW Vertigo 12mm Axle 114.1 (51.1 + 10.5)
1x 12 x 18.2mm Wheel Support Spacer fits TRAMPA Wheels on 12mm Axles
4x 12mm Shim - Bridges the tiny spaces between bearings on axles
2x 7/16ths (12mm) Marine Grade Stainless steel Nylock Axle HALF nut
Weight: 801g
What colour 12/14FiFties Baseplate do you want ?
What colour 12/14FiFties Baseplate do you want ?

12/14 FIFTIES Baseplate - BLACK
12/14 FIFTIES Baseplate - BLACK

12/14 FIFTIES Baseplate - BLUE
12/14 FIFTIES Baseplate - BLUE

12/14 FIFTIES Baseplate - BRONZE
12/14 FIFTIES Baseplate - BRONZE

12/14 FIFTIES Baseplate - GOLD
12/14 FIFTIES Baseplate - GOLD

12/14 FIFTIES Baseplate - GREEN
12/14 FIFTIES Baseplate - GREEN

12/14 FIFTIES Baseplate - GUNMETAL
12/14 FIFTIES Baseplate - GUNMETAL

12/14 FIFTIES Baseplate - PINK
12/14 FIFTIES Baseplate - PINK

12/14 FIFTIES Baseplate - PURPLE
12/14 FIFTIES Baseplate - PURPLE

12/14 FIFTIES Baseplate - RED
12/14 FIFTIES Baseplate - RED

12/14 FIFTIES Baseplate - SILVER
12/14 FIFTIES Baseplate - SILVER

What Colour 18.2mm Wheel Support Axle Spacers do you want on the front?
What Colour 18.2mm Wheel Support Axle Spacers do you want on the front?

18.2mm Wheel Support Axle Spacers - BLACK
18.2mm Wheel Support Axle Spacers - BLACK

18.2mm Wheel Support Axle Spacers - BLUE
18.2mm Wheel Support Axle Spacers - BLUE

18.2mm Wheel Support Axle Spacers - BRONZE
18.2mm Wheel Support Axle Spacers - BRONZE

18.2mm Wheel Support Axle Spacers - GOLD
18.2mm Wheel Support Axle Spacers - GOLD

18.2mm Wheel Support Axle Spacers - GREEN
18.2mm Wheel Support Axle Spacers - GREEN

18.2mm Wheel Support Axle Spacers - GUNMETAL
18.2mm Wheel Support Axle Spacers - GUNMETAL

18.2mm Wheel Support Axle Spacers - PINK
18.2mm Wheel Support Axle Spacers - PINK

18.2mm Wheel Support Axle Spacers - PURPLE
18.2mm Wheel Support Axle Spacers - PURPLE

18.2mm Wheel Support Axle Spacers - RED
18.2mm Wheel Support Axle Spacers - RED

18.2mm Wheel Support Axle Spacers - SILVER
18.2mm Wheel Support Axle Spacers - SILVER

Quantity required:
We have enough parts to make…  
RRP £125 - 1x TRUCK

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon