Home»ELECTRIC BOARDS»Electric LONGBOARDS »12FiFties Longboards»URBAN TREADS WHEELS »12FiFties ORRSOM Electric URBAN Longboard - TWIN CUSTOM

Sonnies latest!

ORRSOM Longboard - Concave & Multi mountable having 3 Ride height positions, ORRSOM!!

TRAMPA's ORRSOM Longboard has been specifically designed to dock perfectly with TRAMPA's range of extra wide Longboard Trucks, 12Fifties are fitted with 9.525mm Axles & the even wider 14Fifties Longboard trucks are fitted with 12mm axles) of which both Longboard Truck options assemble harmoniously to the deck & give the user 3 different ride heights to match the 3 different wheel sizes that can fit to this Deck!! To make one board to be able to fit 3 different wheel sizes is ORRSOM!!

•Available in 3 flex ratings,
   14ply - FLEXI 
   15ply - FIRM
   16ply - STIFF

•supplied smothered from tip to tip in hard waring JESSOP Grip tape & of course a TRAMPA Deck would not be a TRAMPA deck if is was not supplied with a Marine Grade Stainless Steel Bolt Kit to connect the trucks with! ORRSOM!!

•Measuring 985mm tip to tip & 230mm at its widest point the ORRSOM deck is trimmed with 5º of negative camber around the edges.

12Fifties - CNC Precision made Extra Wide All Terrain Longboard Truck

TRAMPA's Super Sexy 12FIFTIES Extra Wide Longboard Trucks are absolutely fabulous! CNC precision shaped from a solid Block of T6 Aluminum, the 50º Mounted Hanger measures 12.5 Inch wide & is fitted with 9.525mm (3/8ths of an inch) Hardened Steel axels which means the EXTRA WIDE Longboard Truck will accommodate every wheel in the TRAMPA product range from 83 or 90mm STICKIES Longboard WHEELS, 125mm GUMMIES Longboard Tyres & The Amazing 6.5 Inch URBAN TREADS Tyres! 

Being 12 Inch wide & Mounted at 50º the 12Fifities Extra Wide Longboard trucks are named after around dimensions. The Extra Wide Longboard Trucks provide high speed stability & the opertunity to add Pneumatic tyres, which beings a complete new ride experience when riding the rough roads that around us, cruising over cracks in the pavement is glorious!

VESC 6 MkVI - TRAMPA gives you Maximum power!

READ MORE in the Description Tab above

Introducing the amazing VESC® 6 MKVI Speed Controller, the 6th major product update of the world famous VESC 6 motor controller product line. Packed with a variety of amazing new features, this VESC motor controller is certainly worthy of it’s pimpin’ gold logo.

New features, setting it aprt from the previous MKV edition are: Second UART port, increased current handling, SPI wired IMU, sensor voltage adjustment in software, Spin-To-Sart deactivation option, black anodized housing.

The first VESC controller capable of hibernating, your board can conserve power while not in use - reducing power consumption to just 20μA – less than the self-discharge rate of the batteries. Or with automatic power off, your VESC controller can switch itself off after a set amount of time.

No more loop keys! Compatible with power buttons / switches, the VESC 6 MKVI controller can be ready to go with a single press / flick. If desired, multiple devices can share a single button.

STS (Spin-To-Start) – it’s possible to set your board to power up with a small kick/nudge! This feature can now be enabled or disabled.
 

Features

- Current and voltage measurement on all phases (three phase shunts)
- Adjustable current and voltage filters (full phase filters)
- built in, SPI wired  IMU chip (accelerometer, gyro)
- Spin-To-Start
- Auto power off timer, adjustable - Regenerative braking
- Traction control (single and twin setup)
- Sensored or sensor less operation + hybrid mode
- full torque from zero RPM
- sensor less position control for most salient motors
- Configurable RPM-, current-, voltage- and power limits
- Input source: CAN, PPM, Analog, NRF
- Communication ports: USB, CAN,UAVCAN,  2x UART, SPI, I²C
- Throttle curve and ramping for all input sources
- Separate throttle curves for acceleration and brakes
- Seamless 4-quadrant operation
- Motor revolution, amp hour, watt hour counting
- Display of speed, power, duty cycle, amp flow, estimated range and battery status on App
- Accumulated data from arrays of VESC controllers
- Real time data analysis and read out via communication ports
- Real time data analysis and read out via VESC-Tool APP or VESC-Tool software
- Adjustable protection against:

          -    Low input voltage
          -    High input voltage
          -    High motor current
          -    High input current
          -    High regenerative braking current (separate limits for the motor and the input)
          -    High RPM (separate limits for each direction).
          -    Over temperature (MOSFET and motor)

Technical Data Sheet

- Voltage: 11.1V – 60V (Safe for 3S to 12S LiPo).
- Voltage spikes may not exceed 60V, do not use 13S LiIon!
- Current: Continuous 80A, peak 120A.  Values depend on the temperature and air circulation around the device!
- 5V 1A output for external electronics
- 3.3V 0,5A output for external electronics
- Modes: DC, BLDC, FOC (sinusoidal)
- Supported sensors: ABI, HALL, AS5047 and other encoders

* Android is a trademark of Google LLC.
Google and Play Store are trademarks of Google LLC.
PIXHAWK is a trademark of Lorenz Meier

12FiFties Carbon Fiber Motor Mount Panel with Axle support & Clamp - TWIN

TRAMPA's 12-FIFTIES Motor Mounts have been designed to be ORRSOM! With breath-taking performance, offering 13-15 tooth gearing options on the motor side & harmonious gearing to match on the slave wheel, there are endless setup options for all kinds of rider & terrains.

Using premium carbon mounting panels & T6 aluminium Truck connectors, the finished motor mounts have an amazing strength-to-weight ratio.

Whether you set up with 83 or 90mm STICKIES Longboard wheels, 125mm GUMMIES Longboard wheels or the 165mm URBAN TREADS pneumatic Tyres, 12FIFTIES Longboard trucks mount at 3 different heights, allowing a variety of wheels to fit.

This simple motor mounting kit is as versatile as they come - working flawlessly with our 12-FIFTIES Longboard Trucks, as well as other brands’ trucks and wheels, and a huge variety of motor & pulley sizes.

Essentially, this kit is the barebones of your motor system - giving you the freedom to pick, choose, and customise what your final product will be!

The Motor Mount Connectors snuggly slide over the truck hanger and are secured tightly with MARINE GRADE M6x10mm grub screws. The Premium Quality Carbon Mounting Panel is sandwiched tightly between the Motor Mount Connectors, & is fitted with a support for long motor axles. The Motor Axle Support houses a precision 608 bearing, supporting axle rotation & ensuring the motor is as secure & efficient as possible. The Motor Axle Support will only work with motors that have longer axles - such as TRAMPA’s very own 118kv or 136kv Brushless Motors.