Home»ALL TERRAIN BOARDS»Mountainboards»with MAGURA Brakes»TRAMPA Magura HS-11 Brake Board

35º Mountainboards will fit to Spring Trucks

TRAMPA Mountainboard decks are Un-Breakable. In over 20 years nobody has ever broken one. They are available as 9/69 or 9/73. 9 is the deck width measured in inches, 69 or 73 is the foot stance area measured in Centimeters. The 9/73 suits longer legged riders. Both decks can be fitted with WINGS to increase the deck width from 9 to 10 inches, to give safe routing for cables from the box in the mddle of the deck under the foot to the motors or controllers at the rear of the deck & to give a comfortable W Shaped Concave feel to the rider under the foot....

INFINITY TRUCK wearing MAGURA Hydraulic Brakes with CUSTOM Disks to fit any 5 Spoke TRAMPA Wheels

TRAMPA's MAGURA HS 11 BRAKE system is an incredibly powerful braking system developed solely for the TRAMPA Trucks. The MAGURA Brakes give you the ability to transform your riding range, making terrain you had previously thought of as 'Off Limits' into new & easily ride-able or even dream-able terrain you just have to ride! You will quickly gain a new air of confidence in your ability by riding with the MAGURA Hydraulic brake system!

By gently squeezing the hand held brake lever this incredibly powerful braking system will progressively slow you to a halt or squeeze hard & it will skid you to a stop! Squeezing the HAND HELD BRAKE LEVER forces the MAGURA BLOOD (hydraulic fluid) through the pipe system, equally pushing the BRAKE PADS onto both of the 5mm thick Aluminum BRAKE DISKS at the same time. 10mm Brake disk mounting spacers position the Brake Disks perfectly against the mega-strong T6 Heat Treated SPOKES supplying plenty of space either side either side of the disk gaining good ventilation, maintaining cool operating temperatures & therefore eliminating Brake fade over prolonged periods of use such as long Alpine descents...

MAGURA are a famous German company producing Hydraulic Braking Systems. The HS-11 Hydraulic Brakes are MAGURA's original Hydraulic braking system. MAGURA have had over 40 years of testing with this equipment in all kinds of terrain on all kinds of wheeled vehicles. The HS-11 setup is time tested & well proven to be perfect for our Mountainboarding applications - specially when modified & fitted to the immense TRAMPA TRUCKS & SUPERSTAR RIMS.

TRAMPA's MAGURA HS 11 - INFINITY BRAKE Truck is an incredibly powerful braking system developed solely for the TRAMPA Trucks. This Braking System will certainly slow you down or stop you dead, which ever you should choose & depending on how hard you squeeze the lever! The MAGURA Brakes give you the ability to transform your riding range, making terrain you had previously thought of as 'Off Limits' into new & easily ride-able or even dream-able terrain you just have to ride! You will quickly gain a new air of confidence in your ability by riding with the MAGURA Hydraulic brake system!

By gently squeezing the hand held brake lever this incredibly powerful braking system will progressively slow you to a halt or squeeze hard & it will skid you to a stop! Squeezing the HAND HELD BRAKE LEVER forces the MAGURA BLOOD (hydraulic fluid) through the pipe system, equally pushing the BRAKE PADS onto both of the 5mm thick Aluminum BRAKE DISKS at the same time. 10mm Brake disk mounting spacers position the Brake Disks perfectly against the mega-strong T6 Heat Treated SPOKES supplying plenty of space either side either side of the disk gaining good ventilation, maintaining cool operating temperatures & therefore eliminating Brake fade over prolonged periods of use such as long Alpine descents...

MAGURA are a famous German company producing Hydraulic Braking Systems. The HS 11 Hydraulic Brakes are MAGURA's original Hydraulic braking system. MAGURA have had over 30 years of testing with this equipment in all kinds of terrain on all kinds of wheeled vehicles. The HS 11 setup is time tested & well proven to be perfect for our Mountain boarding applications - especially when modified & connected to the immense TRAMPA TRUCKS & SUPERSTAR WHEELS.

The TRAMPA INFINITY truck is the strongest SPRING TRUCK in the product range! To ensure the maximum strength possible the hanger is made from FORGED ALUMINUM & it's one solid piece! The INFINITY Hanger is fitted with 12mm SOLID STEEL Axles. The 12mm Solid Axles are HEAT TREATED. Heat treating steel makes it substantially stronger, more resistant to impact & less prone to rust. 12mm Solid Axles are without doubt the strongest Axles in the TRAMPA range. The Axles are first Glued & then Screwed with a Marine Grade Stainless Steel Grub Screw locking them in the perfect position to mount your wheel too. The Hanger is connected to an EXTRUDED & T6 HEAT TREATED Aluminum BASEPLATE & as it's name suggests the INFINITY HS-11 TRUCK is designed to last forever!!

CUSTOM 8 inch SUPERSTAR WHEEL - BUILD YOUR OWN CUSTOM MADE 8 inch wheel (COPY)

CUSTOM BINDINGS - Build your own Bindings & colour combo!

RATCHET BINDINGS are the Mountain Board rider’s primary choice of binding! The Ratchet Buckle mechanism allows you to easily position the binding to fit most adult sized shoes or boots. There is a release clip on the top of the Ratchet Buckle which works just the same as snowboard binding does, that release the pressure & allows you to step out...

The main Foot-Strap has a special 'Lug or locator' on the top of the Foot-Strap to house a special Hook that protrudes from the underside of Ratchet Buckle. This hook presses into the 'Lug' on the top of the Foot-strap preventing any sideways movement in the connection of the Strap & Ratchet Buckle

The Ratchet Buckle connects with a special M5 Star nut & M5x8mm Countersunk bolt & the Ratchet is mounted on the top of the Main Foot Strap. The LADDER STRAP Positions on the outside of the foot & feeds into the Ratchet Buckle. Levering the Ratchet buckle brings the two straps together. The Ratchet Buckle locks each time you lift the buckle tightening the two straps together until you have a snug but not tight connection over the top of your foot. The release clip can be tuff to move specially of your bindings have been ratcheted tight.

Ratchet Bindings work at their absolute optimum when combined with TRAMPA Heel Straps. HEEL STRAPS Completely lock your feet into any of the TRAMPA bindings to make you feel at one with the deck. When using Heel Straps you are 100% committed to the ride & by doing so you gain so much more control over the board.  

With 3 pairs of different length Ladder Straps to choose from, the TRAMPA Heel Straps easily adjust to fit to any sized shoe that comfortably fits onto a Mountain Board . A CAMLOCK BUCKLE on one side of the strap is used to Lock the Ladder Strap on one side of your foot whilst a Ratchet Buckle is used on the other side for easy tightening/loosening adjustment. The Ratchet Buckle easily tightens the Ladder into the Heel Straps so that your foot is locked into a comfortable position!. 

TRAMPA Heel Straps are universally fitting and are supplied with a Marine Grade Stainless Steel FITTING KIT as standard, so only take a few minutes to assemble. 

ALL TRAMPA Bindings are assembled using a Marine grade A4 Stainless Steel hardware. The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require.

All TRAMPA bindings use Stainless steel Dome Headed Bolts, connected through the Footstrap into L-Brackets, ensuring no discomfort to the foot. 

The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require 

TRAMPA's huge range of bindings are the most customisable on the market - meaning you’ll be able to get the perfect fit for your riding style - in any colour scheme you can think up.