Home»ELECTRIC BOARDS»ORRSOM GT Electric LONGBOARDS »CUSTOM 8 or 9 Inch Wheel ORRSOM GT»ORRSOM GT URBAN Electric Longboard SINGLE MOTOR - FULLY LOADED

ORRSOM GT Longboard Deck - BLANK

TRAMPA's ORRSOM GT Longboard deck is a break though in deck technology & is radically different deck to all other longboard decks that have come before it!

Made from the amazingly flexible TRAMPA Composite material the deck it is split at the tip, and capable of connectig to the senastional 14Fifties Extra Wide Longboard trucks to assemble to give 3 different ride heights to suit the 3 different 3 wheel sizes it is made to work perfectly with.

14FiFties - 14.5 Inches wide & Mounted at 50º CNC Precision made Super Extra Wide All Terrain Longboard Truck with 12mm Axles to fit any TRAMPA Wheel!!

TRAMPA's Super Sexy 14FIFTIES 'Supa-Dupa' Extra Wide Longboard Trucks are absolutely fabulous! CNC precision shaped from a solid Block of T6 Aluminum, the 50º Mounted Hanger measures 14.5 Inch wide & is fitted with 12mm (7/8ths of an inch) Hardened  & Hollowed Steel axels which means the EXTRA WIDE Longboard Truck will accommodate every wheel in the TRAMPA product range from 125mm GUMMIES Longboard Tyres, the Amazing 6.5 Inch URBAN TREADS Tyres, 7, 8 & Even enough spae on the hanger to fit 9 Inch Wheels!!!

Being 14 Inch's wide & Mounted at 50º the 14Fifities 'Supa-Dupa' Extra Wide Longboard trucks are named after around dimensions. The 'Supa-Dupa' Extra Wide Longboard Trucks provide high speed stability & the ability to be able to use Pneumatic tyres, which beings a complete new ride experience when riding the rough roads that surround us, cruising over cracks in the pavement becomes glorious!

Build your own Custom TRAMPA Wheel - SUPERSTAR, 8 Inch MEGASTAR, 9 Inch PRIMO or 9 INCH DEEP DISH MEGASTAR Wheels! Awesome selection for on & off road! Amazing!!

ORRSOM GT BATTERY Tray & fix kit

VESC 6 MkVI - TRAMPA gives you Maximum power!

READ MORE in the Description Tab above

Introducing the amazing VESC® 6 MKVI Speed Controller, the 6th major product update of the world famous VESC 6 motor controller product line. Packed with a variety of amazing new features, this VESC motor controller is certainly worthy of it’s pimpin’ gold logo.

New features, setting it aprt from the previous MKV edition are: Second UART port, increased current handling, SPI wired IMU, sensor voltage adjustment in software, Spin-To-Sart deactivation option, black anodized housing.

The first VESC controller capable of hibernating, your board can conserve power while not in use - reducing power consumption to just 20μA – less than the self-discharge rate of the batteries. Or with automatic power off, your VESC controller can switch itself off after a set amount of time.

No more loop keys! Compatible with power buttons / switches, the VESC 6 MKVI controller can be ready to go with a single press / flick. If desired, multiple devices can share a single button.

STS (Spin-To-Start) – it’s possible to set your board to power up with a small kick/nudge! This feature can now be enabled or disabled.
 

Features

- Current and voltage measurement on all phases (three phase shunts)
- Adjustable current and voltage filters (full phase filters)
- built in, SPI wired  IMU chip (accelerometer, gyro)
- Spin-To-Start
- Auto power off timer, adjustable - Regenerative braking
- Traction control (single and twin setup)
- Sensored or sensor less operation + hybrid mode
- full torque from zero RPM
- sensor less position control for most salient motors
- Configurable RPM-, current-, voltage- and power limits
- Input source: CAN, PPM, Analog, NRF
- Communication ports: USB, CAN,UAVCAN,  2x UART, SPI, I²C
- Throttle curve and ramping for all input sources
- Separate throttle curves for acceleration and brakes
- Seamless 4-quadrant operation
- Motor revolution, amp hour, watt hour counting
- Display of speed, power, duty cycle, amp flow, estimated range and battery status on App
- Accumulated data from arrays of VESC controllers
- Real time data analysis and read out via communication ports
- Real time data analysis and read out via VESC-Tool APP or VESC-Tool software
- Adjustable protection against:

          -    Low input voltage
          -    High input voltage
          -    High motor current
          -    High input current
          -    High regenerative braking current (separate limits for the motor and the input)
          -    High RPM (separate limits for each direction).
          -    Over temperature (MOSFET and motor)

Technical Data Sheet

- Voltage: 11.1V – 60V (Safe for 3S to 12S LiPo).
- Voltage spikes may not exceed 60V, do not use 13S LiIon!
- Current: Continuous 80A, peak 120A.  Values depend on the temperature and air circulation around the device!
- 5V 1A output for external electronics
- 3.3V 0,5A output for external electronics
- Modes: DC, BLDC, FOC (sinusoidal)
- Supported sensors: ABI, HALL, AS5047 and other encoders

* Android is a trademark of Google LLC.
Google and Play Store are trademarks of Google LLC.
PIXHAWK is a trademark of Lorenz Meier

SINGLE Motor 12s1p x2 Underboard Battery Box Complete XT90s Cable kit - Everything you need to Wire your board if using Zippy Compact batteries with XT90 plugs

TEXT NEEDS ADJUSTING

This complete Cable kit is used to link 2x 6s Batteries together (the batteries must be fitted with female XT90 connectors), passing trough a 50Amp safety fuse into a single TRAMPA VESC to power a single TRAMPA motor giving you the amazing 12s power that everybody is talking about... :-)

The finely stranded (1036 strands per 4mm core) & highest standard available copper cables (made in Germany) flex perfectly in their top quality & super flexible silicone coating to enable you to connect everything together neatly within the contents of the carbon fibre Beast Box, remember the VESC is mounted internally in the Beast Box and I can tell you it can be a bit of a squeeze fitting everything into the Beast, but having superflexible high quality cables to work with means everything can be easily moved around inside the box slipping them into the perfect position without the fear of damaging the cables or the hand soldered in the UK connections to the XT90 plugs... 

The XT90 plugs have a little ridge on their exterior whilst the material they are made from is very strong and very cleverly we have made the Beast box lid with 2 precision made holes perfect for accepting for the XT90's to push through the lid from the inside of the box & rest against the rim of the hole in the lid, allowing everything else in the box to seal away enabling you to be able to, with the use of some squeeze silicone in a tube to become pretty much weather proof... 

By the use of some suitably small 2mm holes next to the precision holes for the XT90 connectors it's possible in combination to neatly zip tie between the XT90's to lock them firmly in position  giving them a strong enough connection  so that so that you can easily push & pull the loopkey / cuicuit breaker at any time from the exterior with out the fear of damaging anything inside or out...!

 The beast box is also fitted with more precision holes to allow tying the exterior VESC cables which come out of the rear of the Beast box to reach the motor whilst holding all the cables neatly in their best position.

Constructed using 4mm thick of the highest standard Copper available (that's lots of Super fine copper Strands - 1036 strands per 4mm core) and coated in Super Flexible Premium Silicone which has been TRAMPA Stamped to prove it's geniality & expected quality (Cus these top quality cables are not cheap) are used to maximise & maintain full performance in your Electric TRAMPA Board at all times! 

14FiFties Motor Mount with 66 Tooth 8 Inch Wheels Pulley Kit - SINGLE

TRAMPA's 14FiFties Open Belt Designed Motor Mounts are ORRSOM! With breath-takingly good looks & super strong performance to match, the 14FiFties Baseplate is presented to you in a pelethera of bright anodised colours for you to choose from when making your purchase & being 14 Inches wide the over-sized Longboard style trucks are not the widest there are, supplying enough space

Offering 13-15 tooth gearing options on the motor side & harmonious gearing to match on the chosen slave wheel, there are endless setup options for all kinds of rider & terrains.

Whether you set up with giant sized 125mm GUMMIES Longboard wheels, the super sporty 165mm URBAN TREADS pneumatic Tyres or if your more likely to want to go more comfort or off road ability choosing the 7 or 8 Inch Pneumatic Wheels,  14FiFties Longboard trucks are pre-fitted with 12mm Axles 

WAND

Introducing the Amazing WAND CONTROLLER

Frank Drenckhahn - King of design & production at TRAMPA & Benjamin Vedder - Creator of the VESC-Project  aka the 'Yoda of Electronics', spent the winter period of 2018/19 designing a revolutionary remote controller, with some new & very exciting 'E-Skate-specific-features' to work in direct relation with the VESC / TRAMPA series of products.

There are many basic remote control options already on the market, but none of them hit the high bar when it comes to features & reliability. Here at TRAMPA, we’ve experienced riding with in-sufficient, untrustworthy remotes. Consequently, we’ve always dreamed of holding a reliable, versatile, ever-lasting, informative & safe remote controller, that matches the outstanding performance of the VESC software & the TRAMPA equipment that they’d be so frequently paired up to. You should expect nothing less than magic whilst waving the WAND over TRAMPA assembled VESC Products!!

HARDWARE

High-end TRAMPA Electric boards deserve to be controlled with a high-end remote, you need to be 100% in control over the Monster under your feet! Personally, I always dreamed of something that feels nice in your hands, made of high grade material, with a little bit of weight to represent the same high quality level of our TRAMPA boards, and the cutting edge technology the VESC offers. This remote is made from 6061 T6 (Aero-grade) Aluminum with a sleek carbon fiber battery lid. You can see & feel the quality straight away.

REAL TIME DATA DISPLAY

The WAND remote is fitted with a circular high resolution OLED display that reveals all the crucial information you want to have at hand while riding your board. The screen might be small, but the list of data it shows is HUGE! You’ll be able to scroll through and see your current speed, average speed, amp draw, duty cycle, average watt hour draw, battery indicator (for both board & remote), recuperation and more to be added through firmware updates!

Whatever data the VESC controller captures can ultimately be displayed on the OLED screen. Benjamin even added in a few tools to display animated graphics, for ultimate pimpness!

SMART REVERSE

Ever over shot the junction & wished you could reverse a little to pull you back from the traffic? Well now with the WAND in your hand, pulling back on the Thumb Controller bringing you to a stop & keeping your thumb in the braking position will automatically instigate the Smart reverse feature which will ramp up enough Amps to switch the rotation direction of the motor but just at slow speed so that the board reverses you out of trouble..... A very very clever feature designed to keep our clients safe...

SAFETY & GESTURE Control: AN OUTLOOK TOWARDS FUTURE FW UPDATES

What is really exciting is the IMU (Inertial Measurement Unit) inside The WAND... The IMU knows the exact orientation of The WAND in space and gathers acceleration values of all the space axis at the same time, acceleration, speed & elevation. Using the IMU, Benjamin will in future be able to code some really useful safety features, as well as some playful things. For instance; one day the remote will be able to tell if you take a tumble & will be able to stop your board safely. It will know when it is resting upside down on a surface, and refuses to send accidental signals to the board. Powering up when you pick it up & going to sleep after 5 minutes of inactivity The WAND is smart enough to save its own battery! It can even be used as a water spirit level, helping you to align things perfectly! Expect some nice FW updates in the FUTURE. IMU features will become available over a period of time!

TRANSFORM YOUR REMOTE

On top of the features mentioned above, amazing piece of tech features the options to either be converted to a pistol grip style trigger remote, or to have an additional small trigger on the lower side to allow additional index finger control. I like to use my index finger to send acceleration commands, while using my thumb to send brake signal commands. Others want to use their thumb or index finger only. Much alike TRAMPA’s boards, these remotes are made to be customised around you!

SAFE KEEPING

We’ve all wasted too much time on the pre-riding ritual known as “Where the **** did I leave the remote?!” Well no more. We decided to equip The WAND with a Magnetic bottom panel. A small metal sheet or magnet attached to your board (stick a big washer to your Battery Box or similar), will keep your remote safe where it belongs all the time, or you simply keep your remote on the fridge, next to the car keys! 

BATTERY LIFE

Battery life has always been an issue in the past. Sometimes you want to go out for a ride, but you forgotton to charge up your remote. Then after a quick charge, you end up worried that it‘ll die before the end of your ride.

When Frank & Benjamin designed this remote, ultra low energy consumption was a prime goal to achieve.

We chose to use standard AAA batteries, so that you can easily carry spares & swap them out - like changing the batteries on your TV remote, giving you ultimate confidence that you will never ever run out of battery. Two tiny AAA cells are good for 30 hours of constant operation. AAA cells are available at gas stations, supermarkets, drug stores, or even in a remote house in the middle of nowhere in a kitchen draw, should you get real desperate while out on your endless trails!

SOFTWARE & SUPPORT

We don't want you to have to buy a new remote because the software becomes outdated, so we made sure this remote would have a USB & SWD port, allowing you to easily flash the latest firmware, and unlock the latest features when they get released. This remote is future proof & will surprise you many times over its life. The Wand Firmware will be Open Source. Please browse Benjamin Vedders Github for source files and copyright information : https://github.com/vedderb

OMPATIBILITY

This remote is fully compatible with the TRAMPA NRF Dongle. An NRF connection is required to pair the Controller to the VESC device. Depending on if or when you bought the dongle, you might need to update its firmware in order to make the connection to the controller though the VESC, which is a simple task. This remote is compatible with any ESC that is based on VESC technology, and running the VESC firmware. Simply plug the TRAMPA NRF Dongle into the UART port of your ESC.

CALIBRATION AND MULTIPLE BOARDS

This remote doesn't require calibration. A simple one click pairing procedure does the trick. This remote will become a solid partner to all your boards.  No more need for multiple remotes for lots of boards, unless you want to ride out with your friends. In which case you can leave your old PPM remote receiver plugged in & switch over to that using the VESC-Tool App.

In order to connect The WAND to your VESC or VESC software compatible ESC, you will need to do a firmware update on that ESC. Simply plug the TRAMPA NRF Dongle into your VESC controller & pairing is pretty much automatic, just follow the on-screen instructions. The TRAMPA NRF Dongle can be updated to the latest, compatible FW, using the latest desktop VESC-Tool.

Technical features for the WAND;

- Stable & safe with NRF wireless connection

- High resolution OLED display

- 2x AAA standard size battery which will give over 60 hours of battery life

- Exterior dimensions:144 x 31x 22mm

- Full Aluminum 6061 T6 SOLID CNC'd housing - Anodized Black with Laser Logo's

- Magnetic bottom panel. The remote sticks to metal surfaces for safe keeping.

- Easy connectable to thousands of devices

Modes that the WAND can control;

- Forwards

- Brake

- Reverse

- Cruise Control

- Pre-programmable to allow you to select between performance setups so you can switch between defined user profiles. Adjusts power levels, acceleration, top speed brakes performance. Define Profiles for Learner, Intermediate & Advance riders who will all prefer different setup's

OLED Display will show you;

- Current Speed

- Average Speed

- Amp Draw

- Battery status of Remote

- Battery status of Board its connected too

- Duty cycle

- Estimated range

- Watt Hour Consumption

- Many many more features yet to be written about :-)

Saftey;

- Shock sensor (will become available via future Firmware update)

- No signal when remote is turned head over (e.g. trigger resting on surface)

- Safe NRF based wireless communication

- Safe pairing to board

- No calibration needed

- No interference with other remotes (group rides)

- Auto power off, auto power on

- Regular firmware updates available

ADDITIONAL FEATURES

- Your Android Phone or Mobile device with the VESC App & the WAND remote will share the same connection to VESC giving seamless connectivity.

- Firmware can be updated via VESC-Tool

- Works with existing TRAMPA NRF Dongles (Dongle may require a Firmware update)

- Different size triggers to fit different sized fingers

- Can be transformed to be a 'Finger Trigger' style remote where an additional feature of adding a Handle for comfy holding

- Can be transformed to have 'Thumb Stick' & 'Small Trigger' on lower side (use index finger for acceleration and thumb for brakes)

- Built in IMU (gyro and accelerometer) Be surprised what magic this can do in the future.

Custom Charger Graupner Ultramat 18 or ULTRAPOWER UP1200AC - Small & Portable or Super quick Charging!

GRAUPNER ULTRAMAT 18

This GRAUPNER ULTRAMAT Charger is capable of Charging & Balancing all cells up to 12s in power. The Ultramat 18 charger is used by the TRAMPA team for charging all of our decks that use Zippy Cells for power. The charger comes with a UK or EURO Plug for wall plug in connection, XT90 Jack leads & 2x 7 pin adaptor plates which allow balancer cable connections from 2x batteries from 1s to 6s using JST Connectors.... As the Graupner is our suggested charger for the Zippy cells this charger is somehow incorporated into the design of our Battery Boxes so using this charger is nice easy to connect, it is reasonably fast to charge whilst it balances (looking after) your cells at the same time and you dont need to remove anything in order to charge as the cells are all snugly secured away in one of the amazing Carbon fiber boxes, which as it so happens have been designed special for this style of charger & easy charging... :-)

12s power is the perfect amount of power to be pushed through any of the TRAMPA Electronic products (12s should only be applied when using the very special TRAMPA VESC6 speed controller). When 12s power is pumped into the VESC6 you will be able to experience the kind of riding performance everybody is talking about. Do not push more power than 12s into the VESC6. Using a XT90 Battery harness cable kit to connect 2x 6s batteries together will double the battery power resulting with a 12s Battery WITHOUT Any soldering or Welding!! 

So as you now know, to achieve 12s power requires a minimum of 2x 6s Batteries (it could be more cells if you were custom making your battery or if you were achieving 12s from 6x 2s, 4x 3s or 3x 4s cells as they can all be harnessed together to make 12s power... but then you will most likely need an additional balancer cable harness or more chargers to charge/balance each cell individually if you want speedy charging), so for efficiency & simplicity we base our 12s power on the use of 2x 6s cells as generally speaking there are many good priced nice performing chargers put there which also have the ability to balance your cells to prevent failiure of the cell, already on the market are capable of charging up to 2x 6 cells at any 1 time,

which maximizes efficiency which in turn means less chargers & (of course if you are making a custom battery you will need a BMS complicated system & Soldering skills) so you either need  2x 6s Battery chargers or 1x charger that is powerful or large enough to charge 2x 6s batteries at the same time to reduce charging times & this GRAUPNER ULTRAMMAT 18 charger is the charger TRAMPA is currently recommending of using capable of charging 2x 6s cells at any 1 time, so if you are running 12s made up from 2x 6s batteries, using this graupner charger you can charge both 6s cells at the same time.... :-)

As well as suggesting our customers find the best performance through using custom cells to make custom battery packs & BMS (Battery management systems), this all gets a little complicated for the majority of our customers, so for ease of supply & speed of installation as plugging in the 6s Cells means no welding or anything messy like that, as well as achieving excellent performance & fabulous range, TRAMPA is strongly encouraging the use of the ZIPPY Compact 6200mAh 6s 40c Lipo Pack with XT90 connectors in on any of the Boards in TRAMPAs range that use either the 12s BEAST BOX or 12s2p MONSTER BOX, as these high power 6s Cells not ony fit perfectly into these custom made Carbon Fiber boxes, but the lids & sides of the Boxes have been CNC'd allowing the wiring loom to flow beautifully inside, further enabling the battery balancer cables to poke out of the rear or sides of the box, whislt most importantly allowing the Charging XT90 connectors to push tightly into & fit perfectly into the precision cut holes in the lid, which are secured int position by the use of s simple ZIPTIE, allowing for simple but very strong KEY connection for turning your board on or off & allowing a really easy plug n play to charge both 6s cells at 1 time when using this Grauper charger

 sit perfectly, further allowing Lug holes for the XT90 Connectors to fit into & be secured by a simple ziptie

you should set your charger to LiPo Manual, 6A and max possible mAh setting. Actually the limit of the charger is 20,000mAh I think. That only means the charger will stop charging when it pumped in 20,000 mAh. Worst case, you need to give the charger a second go to finish the job. It simply counts how many mAh it pumped in and stops at your pre-defined value.

When you press the two middle buttons simultaneously, while you charge,you can enter a mode that allows you to see each individual cell.

+- buttons let's you flick through the cells.

Each cell is full when it's at 4.21V.

A test with wheels in the air gives zero information about the performance, since the Vesc is current controlled. This control mode only works when there is a load.

Your Remote has two modes, fast and slow.

When you switch it on, ist in slow mode.

Press the on button again and it will blink fast.

Now you are in fast mode.

Any questions: I'm here for you darling :-)

For an estimate of how long your batteries will take to charge use this Battery Charging Calulator

For example: Compact Zippy 6s 6200mah charged with a graupner (no booster - 2a charge rate) would be 3 hours 45 minutes

ULTRA POWER UP1200W

Using the ULTRA POWER Charger It is possible to charge & balance 2x Batteries packs up to 12s in size at the same time...

SO for example if you have 2x Electric Boards in your collection, (lucky boy) if they are both running a single 12s pack (i.e. 2x 6s 22000 mAh HRB Cells or 6x 2s HRB 10, 12 or 16000mAh) then you can fast charge & balance 2 x Boards at the same time or if you only have 1x Board but you are running 2x 12s packs (i.e. 4x Zippie compact cells fit directly into the Monster Box using a Graupner charger you can only charge 1x 12s pack at a time so you will need double the time to charge 2x 12s packs if you have 4x Zippies cells unless you purchase another Graupner charger so you can then charge both cell packs at the same time -  if this is the option you have selected, then it is also possible to boost the speed of the charge of your 2x Graupner chargers by placing a Booster charger before them) then this is the deluxe charge for you.

This charger is terribly expensive but it is everything the 2x Graupner chargers with Booster option tries to be. It can charge incredibly fast up to 15A, it has an internal booster with amp adjustment for charging & Balancing all kinds of cells. The best part about this charger is that you simply plug it in & it knows the cells you have, Its easy to possible to mix up the balance cable connections when plugging in for the first time but the ULTRA POWER alerts you to this & you simply swap over the balance cables & it knows it sorted, great for the guys like me who are less 'DIY' & more 'let me get out & ride' :-) After figuring out which balance cable goes in which connector on the charger it is best practice to mark the balance cables with felt Pen in red or Black etc so you know on the next time which balance cable goes into which port on the connection pad without having to exchange them each time for guessing wrongly lol! 

Simply select the amount of Amp charge you wish to put into your cells by pressing the select button & press start on the screen & voila its charging! Selecting a low 2A charge will trickle charge & balance your batteries beautifully but will take a long time to do, where as turning the charger up to 15A will give you a fast full boosted charge in maybe aeound 1 hour (depending on cell), which is great if the weather is amazing & you cant get enough riding on that day but its not good practice to fast charge your cells all of the time, so only fast charge when you don't have time to wait for a nice balance charge, selecting a low to mid power charging option on a regular basis will keep your cells in the best operating conditions, 

This Special ULTRA POWER Charger for the Complete TRAMPA Electric Boards comes Supplied with a complete ULTRA Power Charger Cable Extension Kit which makes plugging into your board really easy & so much less fiddly than the shorter cables it comes with PLUS it comes with either UK or EURO wall Plug (sadly no US Charger plug option but a simple world wide adaptor plug will do the trick to convert it). Please select your wall plug option below.

Luxury Travel Bag - Fits 15º short decks with 8 Inch wheels perfectly

Arrive like a Pro with a Tailor made LUXURY TRAVEL BAG. This quality bag is the perfectly sized to fit your 15° TRAMPA Skate Deck & your riding equipment into.

On the exterior, the Luxury bags Double Strength Chunky Zipper, un-zips all the way round to allow easy entry for the board. The LUXURY TRAVEL BAG is padded with 10mm EVA foam at the top, the bottom & at the sides to protect your board from impacts during transit. Top quality Stainless Steel Zippers, pimped out with custom made TRAMPA Zipper Pulls, makes zipping & un-zipping the bag a total pleasure. For your security whilst traveling your bag is supplied with a Padlock & key.

CHUNKY CARRY HANDLES join at the side of the bag & with the use of a velcro strap they connect comfortably together. Brushed Aluminum Quick Release Dog Clips attach or remove the Double Padded & Adjustable length Shoulder Strap, making carrying it down the beach or through the airport as comfy as possible. There is also a quick access Exterior Travel pocket for storing documents and the likes & Re-Enforced Grab Handle at the end of the bag to assist in lugging the bag around.

The interior of the bag is lined in strong Nylon making slipping your board into the bag very easy to do. It also has Super-long Velcro Pockets that run the entire length & depth of both sides of the bag, allowing you to be able to safely store your Bar & lines within. Steady straps wrap over the deck, anchoring it in place to avoid rolling around, making it more comfortable to carry.

The Luxury Travel Bag is best used in conjunction with the TRAMPA MUCK OFF BAG, as its name suggests, it keeps the muck off & keeps the Luxury bag clean!!