Home»ELECTRIC BOARDS»ORRSOM GT Electric LONGBOARDS »CUSTOM 8 or 9 Inch Wheel ORRSOM GT»ORRSOM GT URBAN Electric Longboard SINGLE MOTOR - CUSTOM

ORRSOM GT Longboard Deck - BLANK

TRAMPA's ORRSOM GT Longboard deck is a break though in deck technology & is radically different deck to all other longboard decks that have come before it!

Made from the amazingly flexible TRAMPA Composite material the deck it is split at the tip, and capable of connectig to the senastional 14Fifties Extra Wide Longboard trucks to assemble to give 3 different ride heights to suit the 3 different 3 wheel sizes it is made to work perfectly with.

14FiFties - 14.5 Inches wide & Mounted at 50º CNC Precision made Super Extra Wide All Terrain Longboard Truck with 12mm Axles to fit any TRAMPA Wheel!!

TRAMPA's Super Sexy 14FIFTIES 'Supa-Dupa' Extra Wide Longboard Trucks are absolutely fabulous! CNC precision shaped from a solid Block of T6 Aluminum, the 50º Mounted Hanger measures 14.5 Inch wide & is fitted with 12mm (7/8ths of an inch) Hardened  & Hollowed Steel axels which means the EXTRA WIDE Longboard Truck will accommodate every wheel in the TRAMPA product range from 125mm GUMMIES Longboard Tyres, the Amazing 6.5 Inch URBAN TREADS Tyres, 7, 8 & Even enough spae on the hanger to fit 9 Inch Wheels!!!

Being 14 Inch's wide & Mounted at 50º the 14Fifities 'Supa-Dupa' Extra Wide Longboard trucks are named after around dimensions. The 'Supa-Dupa' Extra Wide Longboard Trucks provide high speed stability & the ability to be able to use Pneumatic tyres, which beings a complete new ride experience when riding the rough roads that surround us, cruising over cracks in the pavement becomes glorious!

Build your own Custom TRAMPA Wheel - SUPERSTAR, 8 Inch MEGASTAR, 9 Inch PRIMO or 9 INCH DEEP DISH MEGASTAR Wheels! Awesome selection for on & off road! Amazing!!

VESC 6 MkVI - TRAMPA gives you Maximum power!

READ MORE in the Description Tab above

Introducing the amazing VESC® 6 MKVI Speed Controller, the 6th major product update of the world famous VESC 6 motor controller product line. Packed with a variety of amazing new features, this VESC motor controller is certainly worthy of it’s pimpin’ gold logo.

New features, setting it aprt from the previous MKV edition are: Second UART port, increased current handling, SPI wired IMU, sensor voltage adjustment in software, Spin-To-Sart deactivation option, black anodized housing.

The first VESC controller capable of hibernating, your board can conserve power while not in use - reducing power consumption to just 20μA – less than the self-discharge rate of the batteries. Or with automatic power off, your VESC controller can switch itself off after a set amount of time.

No more loop keys! Compatible with power buttons / switches, the VESC 6 MKVI controller can be ready to go with a single press / flick. If desired, multiple devices can share a single button.

STS (Spin-To-Start) – it’s possible to set your board to power up with a small kick/nudge! This feature can now be enabled or disabled.
 

Features

- Current and voltage measurement on all phases (three phase shunts)
- Adjustable current and voltage filters (full phase filters)
- built in, SPI wired  IMU chip (accelerometer, gyro)
- Spin-To-Start
- Auto power off timer, adjustable - Regenerative braking
- Traction control (single and twin setup)
- Sensored or sensor less operation + hybrid mode
- full torque from zero RPM
- sensor less position control for most salient motors
- Configurable RPM-, current-, voltage- and power limits
- Input source: CAN, PPM, Analog, NRF
- Communication ports: USB, CAN,UAVCAN,  2x UART, SPI, I²C
- Throttle curve and ramping for all input sources
- Separate throttle curves for acceleration and brakes
- Seamless 4-quadrant operation
- Motor revolution, amp hour, watt hour counting
- Display of speed, power, duty cycle, amp flow, estimated range and battery status on App
- Accumulated data from arrays of VESC controllers
- Real time data analysis and read out via communication ports
- Real time data analysis and read out via VESC-Tool APP or VESC-Tool software
- Adjustable protection against:

          -    Low input voltage
          -    High input voltage
          -    High motor current
          -    High input current
          -    High regenerative braking current (separate limits for the motor and the input)
          -    High RPM (separate limits for each direction).
          -    Over temperature (MOSFET and motor)

Technical Data Sheet

- Voltage: 11.1V – 60V (Safe for 3S to 12S LiPo).
- Voltage spikes may not exceed 60V, do not use 13S LiIon!
- Current: Continuous 80A, peak 120A.  Values depend on the temperature and air circulation around the device!
- 5V 1A output for external electronics
- 3.3V 0,5A output for external electronics
- Modes: DC, BLDC, FOC (sinusoidal)
- Supported sensors: ABI, HALL, AS5047 and other encoders

* Android is a trademark of Google LLC.
Google and Play Store are trademarks of Google LLC.
PIXHAWK is a trademark of Lorenz Meier

SINGLE Motor 12s1p x2 Underboard Battery Box Complete XT90s Cable kit - Everything you need to Wire your board if using Zippy Compact batteries with XT90 plugs

TEXT NEEDS ADJUSTING

This complete Cable kit is used to link 2x 6s Batteries together (the batteries must be fitted with female XT90 connectors), passing trough a 50Amp safety fuse into a single TRAMPA VESC to power a single TRAMPA motor giving you the amazing 12s power that everybody is talking about... :-)

The finely stranded (1036 strands per 4mm core) & highest standard available copper cables (made in Germany) flex perfectly in their top quality & super flexible silicone coating to enable you to connect everything together neatly within the contents of the carbon fibre Beast Box, remember the VESC is mounted internally in the Beast Box and I can tell you it can be a bit of a squeeze fitting everything into the Beast, but having superflexible high quality cables to work with means everything can be easily moved around inside the box slipping them into the perfect position without the fear of damaging the cables or the hand soldered in the UK connections to the XT90 plugs... 

The XT90 plugs have a little ridge on their exterior whilst the material they are made from is very strong and very cleverly we have made the Beast box lid with 2 precision made holes perfect for accepting for the XT90's to push through the lid from the inside of the box & rest against the rim of the hole in the lid, allowing everything else in the box to seal away enabling you to be able to, with the use of some squeeze silicone in a tube to become pretty much weather proof... 

By the use of some suitably small 2mm holes next to the precision holes for the XT90 connectors it's possible in combination to neatly zip tie between the XT90's to lock them firmly in position  giving them a strong enough connection  so that so that you can easily push & pull the loopkey / cuicuit breaker at any time from the exterior with out the fear of damaging anything inside or out...!

 The beast box is also fitted with more precision holes to allow tying the exterior VESC cables which come out of the rear of the Beast box to reach the motor whilst holding all the cables neatly in their best position.

Constructed using 4mm thick of the highest standard Copper available (that's lots of Super fine copper Strands - 1036 strands per 4mm core) and coated in Super Flexible Premium Silicone which has been TRAMPA Stamped to prove it's geniality & expected quality (Cus these top quality cables are not cheap) are used to maximise & maintain full performance in your Electric TRAMPA Board at all times! 

14FiFties Motor Mount with 66T Pulley Kit - SINGLE

TRAMPA's 14FiFties Open Belt Designed Motor Mounts are ORRSOM! With breath-takingly good looks & super strong performance to match, the 14FiFties Baseplate is presented to you in a pelethera of bright anodised colours for you to choose from when making your purchase & being 14 Inches wide the over-sized Longboard style trucks are not the widest there are, supplying enough space

Offering 13-15 tooth gearing options on the motor side & harmonious gearing to match on the chosen slave wheel, there are endless setup options for all kinds of rider & terrains.

Whether you set up with giant sized 125mm GUMMIES Longboard wheels, the super sporty 165mm URBAN TREADS pneumatic Tyres or if your more likely to want to go more comfort or off road ability choosing the 7 or 8 Inch Pneumatic Wheels,  14FiFties Longboard trucks are pre-fitted with 12mm Axles