Home»ELECTRIC BOARDS»Electric Carve Boards»MkIII Electric GUMMY Carve Board »MkIII GUMMIES ELECTRIC Carveboard SINGLE motor VESC6 - 16A FULLY LOADED

By altering the number of layers of material that we add into the mould, we are are able to tune the final performance of the TRAMPA decks relevant to the riders weight height & ability. Please use the FLEXOMETER above as a guide to help you choose the right ply board for you. TRAMPA's FLEXOMETER information is to be interpreted as a 'GUIDE ONLY' as there is no fixed rule as to which is the exact right deck for you. The weight, height & ability of the rider will all help determine which is the right sort of deck for you, but of course the most important factor is personal preference as to how the rider wants their deck to feel.... Some riders like it flexi, some like it firm, some like it very very stiff.... It depends on what you are doing on your board, i.e. freestyle, freeride, boarder-cross, altho there is guidance there is no right & no wrong just personal preference but when purchasing a deck from TRAMPA we want to make sure you get it exactly the way you want it! so if your stuck as to which one is the best for you them please drop as a line...

A GUMMIES Carve Board can cruise over cracks & bumps that might stop the STICKIES, and with none of the roll resistance found with pneumatic tyres, this board is a beast on smooth surfaces! Compatible with 44 tooth Slave Wheels, when paired with the right Motor Pulley this board will be cruising at 35mph no problem!

Check out the Gearing Chart for more information.

GUMMIES Tyres work with HYPA (125g), SUPERSTAR (179g) & MEGASTAR (292g) Hubs.

GUMMIES & URBAN Carve Boards use the MK2 Motor Mount Connection Panel. Stepping away from the Carbon Panels & Truck Adaptors, the Mk2 Motor Mount Connection Panel is an all-in-1, CNC’d T6 Aluminium panel that guarantees secure & accurate Drive Train attachment. 
Because both boards use the same Motor Mount Connection Panel, a quick & simple swap of Pulleys, Belts & Wheels gives a whole new board, with new terrains to shred. We’re offering PRO Carve Boards with these parts as a kit - for those keen to experience 2 boards in 1!

TRAMPA’s amazing range of Electric Carve Boards have been described as “A Whole New Riding Experience” – & that’s not wrong.
Available with STICKIES, GUMMIES & URBAN TREADS wheels, TRAMPA’s Carve Boards look, feel & perform unlike anything else on the market.

The beauty of the Carve board is in the set up – or rather – how you set it up… One choice of parts creates a board capable of straight-line bombing at insane speeds. Another choice & it’s a board so buttery it can turn any corner on a dime.

Carve boards are all available with Single or Twin Motors. Single motor boards are easier on the wallet, & will still hit the same eye-watering speeds as twin motors.
Twin motors split the brunt of the work, so less chance of motors over-heating, & twice the grip - so if you’re looking for a board that’ll fly off the line, you’ve got to go twin!
Carve boards can fit any of the 118-160Kv 6364 DC Motors we offer. 118Kv Motors are the choice for particularly hilly areas, whereas 160Kv Motors will carry you to some insane speeds!
Due to the extra space needed for two VESCs, we can currently only offer Twin Setups using the BIGGEST BEAST BOX.

Measuring just 850mm tip-to-tip, TRAMPA’s CARVER DECKS are balanced between being small enough to carry on a bus - & long enough to still feel substantial & stable beneath your feet at speed.
Using 35° angled tips, Carver Decks have the same flex & ‘pop’ as TRAMPA’s MTB decks, & work in conjunction with MINI SPRING TRUCK steering systems.
Choice of 14-16ply, available as;
STANDARD (2350g)
HOLY PRO (2200g)

Carve boards come fitted with a rear-mounted BEAST BATTERY BOX. Rear-mounting the batteries ensures the deck doesn’t loose any flex or ‘pop’, while leaving all the space for freedom of foot-placement.
Carve Boards are compatible with Under-Board Battery Trays. Under-Board Battery Trays may look sleeker, but they sacrifice clearance on the bottom of the board, as well as the flex of the deck itself – BEAST BOXES solve both these issues.
Having the weight of the batteries over the rear helps to give the back wheels extra grip – perfect when carving-tightly.
Available in;
STANDARD (Space for 2x 6200mAh Zippy Compacts & 1x VESC)
BIGGER (Space for 2x 12000mAh Batteries & 1x VESC)
BIGGEST (Space for 2x 16000mAh Batteries & 2x VESC)

Carve boards use MINI SPRING TRUCKS - TRAMPA’s most multifunctional steering system yet! A scaled down & improved version of TRAMPA’s already-amazing Spring Trucks, MINI SPRING TRUCKS give three points of adjustment to fine-tune the steering resistance - through Spring Adjustors, various colours of DAMPA, & finally by installing the springs closer or further away from the Kingpin.
MINI SPRING TRUCKS use reversible hangers – giving two sets of trucks in one! The axles have been mounted in an offset position, so when the hanger is reversed, the wheelbase length, ride-height and performance of the finished board is changed.
12.5” wide with 9.525mm axles, available in;
INFINITY (817g).
VERTIGO (737g).
ULTIMATE (703g).

It’s possible to attach T6 Aluminum BULL BARS to your front truck, which not only knocks the road-kill out of the way & potentially mows the lawn as you go, but also allows you to connect all kinds of things from lights, cameras, Sat-Navs, or anything else you may need on the front end of your board.

Carve boards are able to fit any style of Bindings & Heel Straps we offer. Using bindings gives a whole new level of confidence & control over the board. Allowing you to really lean into turns, hop up curbs & tick tack - bindings are a true game changer on Carve Boards.

You will need to supply your own Batteries to make the boards move. There are many options when it comes to cells; desired range & budget usually determine the sort of cells you should purchase. People often ask us what cells to use - & there are hidden issues with some cells, such as availability, price, shipping restrictions, wrong connectors, or complexity of build (especially when it comes to making custom build batteries). Taking all these factors into consideration, we found a regular supply of good performance cells from a variety of suppliers & consequently built our Battery Boxes around them. Check out our RECOMMENDED BATTERIES page for help. Easy :-)

35° Original 9-69 Carve Deck

Measuring just 850mm in length, TRAMPA’s CARVER DECK is the perfect balance between being small enough to take on a bus, while still feeling substantial & stable under your feet at speed.

With 35° tips, Carve Decks have the same flex & ‘pop’ as TRAMPA’s MTB decks, making them the perfect ‘urban-board’ choice for Mountainboarders. Working in conjunction with Mini Spring Trucks, the resulting Carveboards have been described as “a whole new riding experience”.

INFINITY ATB Mountainboard Truck - 16 inch wide with 12mm SOLID Axles with Infinity Baseplate & Steel kingpin

TRAMPA's 16.5 Inch wide ATB INFINITY TRUCK is time proven as being the strongest ATB SPRING TRUCK on the planet! All of TRAMPA's Spring Truck hangers are made from Premium FORGED ALUMINUM & to max out strength this Infinity hanger is one solid piece with NO CNC lightweight work - Its a little heavier in comparrison to the Vertigo or Ultimate Trucks with NO fancy CNC lightweight cut out work or Titanium Axles but this truck is mega strong & is definitly the option for the large sized adult riders!

To compliment the Superior strength of a Solid hanger body, the ATB INFINITY Hanger is fitted with SOLID 12mm STEEL Axles. Prior to being machine fitting, the 12mm Solid Axles are HEAT TREATED. Heat treating steel makes it substantially stronger, more resistant to impact & less prone to rust. 12mm Solid Axles are without doubt the strongest Axles in the TRAMPA range.  

The Infinity Hanger is connected to an EXTRUDED & T6 HEAT TREATED SOLID Aluminum INFINITY BASEPLATE & when assembled with the Heat Treated Steel Kingpin as it's name suggests the INFINITY ATB TRUCK is designed to last!!

TRAMPA's Infinity Hanger & Baseplate are machined with 2 Spring positions. Securing the springs in the inside position will give you easy steering which is really good for beginners struggling to steer or the crazy carvers out there love the loose steering, whilst positioning the springs into the outside position firms the steering resistance considerably & accopanying them by fitting the amazing TRAMPA DAMPAs ensures the Trucks are more suited to experience high speed or off road riding situations, or as is so commonly happening these days when fitted with Electric Motor Mounts :-)

TRAMPA's ATB Infinity Truck will interconnect with TRAMPA's Urban Motormounts as well as TRAMPA's Pro Motormount setup & of course all of TRAMPA's Wheel options from 5 Inch HYPA, SUPERSTAR Gummies through to 9 Inch Primo Wheels - Awesome!

Custom TRAMPA hub with Gummies 125mm Longboard Wheel Tyre

TRAMPA's new & AMAZING 125mm GUMMIES Tyres are a 'Revolution' in the boarding world ;-) The GUMMIES Wheels are so good its as if the Longboard wheel has just been re-invented! The Gummies Tyres fit too & transform the performance of both of TRAMPA's HYPA & SUPERSTAR off road wheels, converting them into Supersized Longboard style wheels & are a completely new sensation & divine dream to ride!

Being 125mm in Diameter the GUMMIES Tyres are much larger than any other Longboard wheel on the market, whilst using High Quality SUPERSOFT Urethane (75a) & the same 50mm wide surface contact as the TRAMPA Stickies Longboard wheels not only do the GUMMIES Tyres perform like their name suggest (When riding on fresh tarmac / asphalt - Hard Packed surfaces, the GUMMIES Tyres stick like 'XXXX to a blanket' allowing the most insane turns & carves that you would not believe were possible) BUT the Super Soft Ultra Premium Urethane we have used also allows the GUMMIES Wheels to glide over cracks in the pavement & smash through the small obstacles that often get in the way when cruising around town, potentially jamming up smaller sized longboard wheels which can be well scary when it happens!!

Boarding of all kinds has recently seen a massive revolution with many new riders coming on the scene adding electric motors & powerful batteries to their boards, you could say much of the equipment being used by other brands is just not up to the job,  riding small wheels on high speed electric boards can be frightening and well when you hook up the TRAMPA GUMMIES wheels onto one of the new TRAMPA Electric Boards, the GUMMIES tyre performace comes into a whole new universe of riding experience that nobody ever knew existed before...!! All of TRAMPA's electric boards are all incredibly powerful, just the most un-real performance is experienced like nothing else ever.... Honest! Fitting a set of GUMMIES to 16 Inch wide ATB Spring Trucks in place of off road tyres converts your Mountainboard into a Street Monster, Racing around places like go-kart tracks will soon become the latest thing too do & we know the mega grippy GUMMIES tyres will become the #1 choice of all serious high speed riders.....

GUMMIES are currently available in BLACK BLUE or RED but all in the same super gummy 75a Soft Premium Urethane. The GUMMIES Tyres will only fit to TRAMPA Hubs HYPA, SUPERSTAR or AMAZING 8 inch MEGASTAR hubs, which in turn fit to any of the TRAMPA Truck Steering Systems and now using the new SPOKE SUPPORT CONVERSION SPACERS that fit to both the SUPERSTAR Hubs & the MEGASTAR hubs

Diameter - 125mm
Width - 52mm
Surface contact - 50mm
Fits to - HYPA & SUPERSTAR Hubs (9.525mm or 12mm Bearings)
Fits to - All 9.525 or 12mm TRAMPA Axles with 34.2mm of clearance.

VESC 6 MkVI - TRAMPA gives you Maximum power!

READ MORE in the Description Tab above

Introducing the amazing VESC® 6 MKVI Speed Controller, the 6th major product update of the world famous VESC 6 motor controller product line. Packed with a variety of amazing new features, this VESC motor controller is certainly worthy of it’s pimpin’ gold logo.

New features, setting it aprt from the previous MKV edition are: Second UART port, increased current handling, SPI wired IMU, sensor voltage adjustment in software, Spin-To-Sart deactivation option, black anodized housing.

The first VESC controller capable of hibernating, your board can conserve power while not in use - reducing power consumption to just 20μA – less than the self-discharge rate of the batteries. Or with automatic power off, your VESC controller can switch itself off after a set amount of time.

No more loop keys! Compatible with power buttons / switches, the VESC 6 MKVI controller can be ready to go with a single press / flick. If desired, multiple devices can share a single button.

STS (Spin-To-Start) – it’s possible to set your board to power up with a small kick/nudge! This feature can now be enabled or disabled.
 

Features

- Current and voltage measurement on all phases (three phase shunts)
- Adjustable current and voltage filters (full phase filters)
- built in, SPI wired  IMU chip (accelerometer, gyro)
- Spin-To-Start
- Auto power off timer, adjustable - Regenerative braking
- Traction control (single and twin setup)
- Sensored or sensor less operation + hybrid mode
- full torque from zero RPM
- sensor less position control for most salient motors
- Configurable RPM-, current-, voltage- and power limits
- Input source: CAN, PPM, Analog, NRF
- Communication ports: USB, CAN,UAVCAN,  2x UART, SPI, I²C
- Throttle curve and ramping for all input sources
- Separate throttle curves for acceleration and brakes
- Seamless 4-quadrant operation
- Motor revolution, amp hour, watt hour counting
- Display of speed, power, duty cycle, amp flow, estimated range and battery status on App
- Accumulated data from arrays of VESC controllers
- Real time data analysis and read out via communication ports
- Real time data analysis and read out via VESC-Tool APP or VESC-Tool software
- Adjustable protection against:

          -    Low input voltage
          -    High input voltage
          -    High motor current
          -    High input current
          -    High regenerative braking current (separate limits for the motor and the input)
          -    High RPM (separate limits for each direction).
          -    Over temperature (MOSFET and motor)

Technical Data Sheet

- Voltage: 11.1V – 60V (Safe for 3S to 12S LiPo).
- Voltage spikes may not exceed 60V, do not use 13S LiIon!
- Current: Continuous 80A, peak 120A.  Values depend on the temperature and air circulation around the device!
- 5V 1A output for external electronics
- 3.3V 0,5A output for external electronics
- Modes: DC, BLDC, FOC (sinusoidal)
- Supported sensors: ABI, HALL, AS5047 and other encoders

* Android is a trademark of Google LLC.
Google and Play Store are trademarks of Google LLC.
PIXHAWK is a trademark of Lorenz Meier

TRAMPA Mk III CARVE BOARD Motor Mount Kit - REGULAR or GOOFY

TRAMPA’s amazing Carve Board drivetrains have been described as providing “A Whole New Riding Experience” – & that’s not wrong.
Suitable for STICKIES, GUMMIES & URBAN TREAD wheels, TRAMPA’s completed Carve Boards feel & perform unlike anything else on the market.

The beauty of a Carve board is in the set up – or rather – how you set it up… One choice of parts creates a board capable of straight-line bombing at insane speeds. Another choice & it’s a board so buttery it can turn any corner on a dime.

CARVE DRIVETRAINS ARE AVAILABLE IN TWO MODELS:

ORIGINAL carve motor mounts use super strong 3k Twill Carbon Mounting panels & T6 Aluminium Truck Connectors to create a drive train with an amazing strength : weight ratio.
Different Carbon Mounting Panels are needed for mounting different wheels.

MKII carve motor mounts use an all-in-one TRUCK CONNECTOR & MOUNTING PANEL. CNC’d from a solid block of T6 Heat-treated Aluminium, the MkII Carver Motor Mount Connector Panel can withstand the knocks & pumps that come along when riding, while staying secure and aligned on the truck.

Carve board drivetrains are all available as Single or Twin Motor setups. Single motor boards are easier on the wallet, & will still hit the same eye-watering speeds as twin motors. Twin motors split the brunt of the work, so less chance of motors over-heating, & twice the grip - so if you’re looking for a board that’ll fly off the line, you’ve got to go twin!
Carve boards can fit any of the 118-160Kv 6364 DC Motors we offer. 118Kv Motors are the choice for particularly hilly areas, whereas 160Kv Motors will carry you to some insane speeds!

Being belt driven, the gear ratios can be fine tuned with a range of Motor & Slave pulleys.

Carve board drivetrains attach to MINI SPRING TRUCKS - TRAMPA’s most multifunctional steering system yet! Using offset axles, its possible to reverse the hangers - changing the wheelbase, ride-height and performance of the finished board – allowing different sized pulleys & wheels to be fitted.
12.5” wide with 9.525mm axles, available in;
INFINITY (817g).
VERTIGO (737g).
ULTIMATE (703g).

WAND MAGNETO Remote Control TRAMPA VESC Based design gives you all the data you could wish for on the fly

Introducing the Amazing WAND CONTROLLER

Frank Drenckhahn - King of design & production at TRAMPA & Benjamin Vedder - Creator of the VESC-Project  aka the 'Yoda of Electronics', spent the winter period of 2018/19 designing a revolutionary remote controller, with some new & very exciting 'E-Skate-specific-features' to work in direct relation with the VESC / TRAMPA series of products.

There are many basic remote control options already on the market, but none of them hit the high bar when it comes to features & reliability. Here at TRAMPA, we’ve experienced riding with in-sufficient, untrustworthy remotes. Consequently, we’ve always dreamed of holding a reliable, versatile, ever-lasting, informative & safe remote controller, that matches the outstanding performance of the VESC software & the TRAMPA equipment that they’d be so frequently paired up to. You should expect nothing less than magic whilst waving the WAND over TRAMPA assembled VESC Products!!

HARDWARE

High-end TRAMPA Electric boards deserve to be controlled with a high-end remote, you need to be 100% in control over the Monster under your feet! Personally, I always dreamed of something that feels nice in your hands, made of high grade material, with a little bit of weight to represent the same high quality level of our TRAMPA boards, and the cutting edge technology the VESC offers. This remote is made from 6061 T6 (Aero-grade) Aluminum with a sleek carbon fiber battery lid. You can see & feel the quality straight away.

REAL TIME DATA DISPLAY

The WAND remote is fitted with a circular high resolution OLED display that reveals all the crucial information you want to have at hand while riding your board. The screen might be small, but the list of data it shows is HUGE! You’ll be able to scroll through and see your current speed, average speed, amp draw, duty cycle, average watt hour draw, battery indicator (for both board & remote), recuperation and more to be added through firmware updates!

Whatever data the VESC controller captures can ultimately be displayed on the OLED screen. Benjamin even added in a few tools to display animated graphics, for ultimate pimpness!

SMART REVERSE

Ever over shot the junction & wished you could reverse a little to pull you back from the traffic? Well now with the WAND in your hand, pulling back on the Thumb Controller bringing you to a stop & keeping your thumb in the braking position will automatically instigate the Smart reverse feature which will ramp up enough Amps to switch the rotation direction of the motor but just at slow speed so that the board reverses you out of trouble..... A very very clever feature designed to keep our clients safe...

SAFETY & GESTURE Control: AN OUTLOOK TOWARDS FUTURE FW UPDATES

What is really exciting is the IMU (Inertial Measurement Unit) inside The WAND... The IMU knows the exact orientation of The WAND in space and gathers acceleration values of all the space axis at the same time, acceleration, speed & elevation. Using the IMU, Benjamin will in future be able to code some really useful safety features, as well as some playful things. For instance; one day the remote will be able to tell if you take a tumble & will be able to stop your board safely. It will know when it is resting upside down on a surface, and refuses to send accidental signals to the board. Powering up when you pick it up & going to sleep after 5 minutes of inactivity The WAND is smart enough to save its own battery! It can even be used as a water spirit level, helping you to align things perfectly! Expect some nice FW updates in the FUTURE. IMU features will become available over a period of time!

TRANSFORM YOUR REMOTE

On top of the features mentioned above, amazing piece of tech features the options to either be converted to a pistol grip style trigger remote, or to have an additional small trigger on the lower side to allow additional index finger control. I like to use my index finger to send acceleration commands, while using my thumb to send brake signal commands. Others want to use their thumb or index finger only. Much alike TRAMPA’s boards, these remotes are made to be customised around you!

SAFE KEEPING

We’ve all wasted too much time on the pre-riding ritual known as “Where the **** did I leave the remote?!” Well no more. We decided to equip The WAND with a Magnetic bottom panel. A small metal sheet or magnet attached to your board (stick a big washer to your Battery Box or similar), will keep your remote safe where it belongs all the time, or you simply keep your remote on the fridge, next to the car keys! 

BATTERY LIFE

Battery life has always been an issue in the past. Sometimes you want to go out for a ride, but you forgotton to charge up your remote. Then after a quick charge, you end up worried that it‘ll die before the end of your ride.

When Frank & Benjamin designed this remote, ultra low energy consumption was a prime goal to achieve.

We chose to use standard AAA batteries, so that you can easily carry spares & swap them out - like changing the batteries on your TV remote, giving you ultimate confidence that you will never ever run out of battery. Two tiny AAA cells are good for 30 hours of constant operation. AAA cells are available at gas stations, supermarkets, drug stores, or even in a remote house in the middle of nowhere in a kitchen draw, should you get real desperate while out on your endless trails!

SOFTWARE & SUPPORT

We don't want you to have to buy a new remote because the software becomes outdated, so we made sure this remote would have a USB & SWD port, allowing you to easily flash the latest firmware, and unlock the latest features when they get released. This remote is future proof & will surprise you many times over its life. The Wand Firmware will be Open Source. Please browse Benjamin Vedders Github for source files and copyright information : https://github.com/vedderb

OMPATIBILITY

This remote is fully compatible with the TRAMPA NRF Dongle. An NRF connection is required to pair the Controller to the VESC device. Depending on if or when you bought the dongle, you might need to update its firmware in order to make the connection to the controller though the VESC, which is a simple task. This remote is compatible with any ESC that is based on VESC technology, and running the VESC firmware. Simply plug the TRAMPA NRF Dongle into the UART port of your ESC.

CALIBRATION AND MULTIPLE BOARDS

This remote doesn't require calibration. A simple one click pairing procedure does the trick. This remote will become a solid partner to all your boards.  No more need for multiple remotes for lots of boards, unless you want to ride out with your friends. In which case you can leave your old PPM remote receiver plugged in & switch over to that using the VESC-Tool App.

In order to connect The WAND to your VESC or VESC software compatible ESC, you will need to do a firmware update on that ESC. Simply plug the TRAMPA NRF Dongle into your VESC controller & pairing is pretty much automatic, just follow the on-screen instructions. The TRAMPA NRF Dongle can be updated to the latest, compatible FW, using the latest desktop VESC-Tool.

Technical features for the WAND;

- Stable & safe with NRF wireless connection

- High resolution OLED display

- 2x AAA standard size battery which will give over 60 hours of battery life

- Exterior dimensions:144 x 31x 22mm

- Full Aluminum 6061 T6 SOLID CNC'd housing - Anodized Black with Laser Logo's

- Magnetic bottom panel. The remote sticks to metal surfaces for safe keeping.

- Easy connectable to thousands of devices

Modes that the WAND can control;

- Forwards

- Brake

- Reverse

- Cruise Control

- Pre-programmable to allow you to select between performance setups so you can switch between defined user profiles. Adjusts power levels, acceleration, top speed brakes performance. Define Profiles for Learner, Intermediate & Advance riders who will all prefer different setup's

OLED Display will show you;

- Current Speed

- Average Speed

- Amp Draw

- Battery status of Remote

- Battery status of Board its connected too

- Duty cycle

- Estimated range

- Watt Hour Consumption

- Many many more features yet to be written about :-)

Saftey;

- Shock sensor (will become available via future Firmware update)

- No signal when remote is turned head over (e.g. trigger resting on surface)

- Safe NRF based wireless communication

- Safe pairing to board

- No calibration needed

- No interference with other remotes (group rides)

- Auto power off, auto power on

- Regular firmware updates available

ADDITIONAL FEATURES

- Your Android Phone or Mobile device with the VESC App & the WAND remote will share the same connection to VESC giving seamless connectivity.

- Firmware can be updated via VESC-Tool

- Works with existing TRAMPA NRF Dongles (Dongle may require a Firmware update)

- Different size triggers to fit different sized fingers

- Can be transformed to be a 'Finger Trigger' style remote where an additional feature of adding a Handle for comfy holding

- Can be transformed to have 'Thumb Stick' & 'Small Trigger' on lower side (use index finger for acceleration and thumb for brakes)

- Built in IMU (gyro and accelerometer) Be surprised what magic this can do in the future.

Luxury Travel Bag - Fits 15º short decks with 8 Inch wheels perfectly

Arrive like a Pro with a Tailor made LUXURY TRAVEL BAG. This quality bag is the perfectly sized to fit your 15° TRAMPA Skate Deck & your riding equipment into.

On the exterior, the Luxury bags Double Strength Chunky Zipper, un-zips all the way round to allow easy entry for the board. The LUXURY TRAVEL BAG is padded with 10mm EVA foam at the top, the bottom & at the sides to protect your board from impacts during transit. Top quality Stainless Steel Zippers, pimped out with custom made TRAMPA Zipper Pulls, makes zipping & un-zipping the bag a total pleasure. For your security whilst traveling your bag is supplied with a Padlock & key.

CHUNKY CARRY HANDLES join at the side of the bag & with the use of a velcro strap they connect comfortably together. Brushed Aluminum Quick Release Dog Clips attach or remove the Double Padded & Adjustable length Shoulder Strap, making carrying it down the beach or through the airport as comfy as possible. There is also a quick access Exterior Travel pocket for storing documents and the likes & Re-Enforced Grab Handle at the end of the bag to assist in lugging the bag around.

The interior of the bag is lined in strong Nylon making slipping your board into the bag very easy to do. It also has Super-long Velcro Pockets that run the entire length & depth of both sides of the bag, allowing you to be able to safely store your Bar & lines within. Steady straps wrap over the deck, anchoring it in place to avoid rolling around, making it more comfortable to carry.

The Luxury Travel Bag is best used in conjunction with the TRAMPA MUCK OFF BAG, as its name suggests, it keeps the muck off & keeps the Luxury bag clean!!