This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

TRAMPA Mountainboard with Custom TRUCKS RATCHET Bindings & Wheels

TRAMPA Mountainboard with 12mm SOLID Axle INFINITY Trucks RATCHET Bindings & Custom Wheels TRAMPA Mountainboard with 9.525mm TITANIUM Axle ULTIMATE Trucks RATCHET Bindings & Custom Wheels TRAMPA Mountainboard with 12mm SOLID Axle Precision INFINITY Trucks Custom Bindings & Custom Wheels TRAMPA Mountainboard with 12mm HOLLOW Axle VERTIGO Trucks RATCHET Bindings & Custom Wheels TRAMPA Mountainboard with 9.525mm TITANIUM Axle ULTIMATE Trucks RATCHET Bindings & Custom Wheels TRAMPA Mountainboard with 12mm SOLID CR-MO Axles SAVAGE Trucks RATCHET Bindings & Custom Wheels TRAMPA-IR Mountainboard with 12mm SOLID Axle 17 inch wide IR Trucks,RATCHET Bindings & Custom Wheels TRAMPA 35° 9/69 Un-Breakable Mountainboard Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Hex Head Bolt kit INFINITY ATB Mountainboard Truck - 16 inch wide with 12mm SOLID Axles with Infinity Baseplate & Steel kingpin Build your own Custom TRAMPA Wheel to fit to 12mm Axles - HYPA, SUPERSTAR, 8 Inch MEGASTAR, 9 Inch PRIMO or 9 INCH DEEP DISH MEGASTAR Wheels! Awesome selection from 5 Inch to 9 Inch, on & off road! Amazing!! 12mm Axle ABEC 7 Rated Mountainboard Bearings for HYPA or SUPERSTAR Wheels CUSTOM BINDINGS - Build your own Bindings & colour combo! TRAMPA Magura HS-11 Brake Board uses MAGURA's Hydraulic Brake system modified to fit onto VERTIGO Trucks & supplied as standard with SUPERSTAR wheels
RRP
£470+
schematic

flexometer

35º Mountainboards will fit to Spring Trucks

INFINITY ATB Mountainboard Truck - 16 inch wide with 12mm SOLID Axles with Infinity Baseplate & Steel kingpin

TRAMPA's 16.5 Inch wide ATB INFINITY TRUCK is time proven as being the strongest ATB SPRING TRUCK on the planet! All of TRAMPA's Spring Truck hangers are made from Premium FORGED ALUMINUM & to max out strength this Infinity hanger is one solid piece with NO CNC lightweight work - Its a little heavier in comparrison to the Vertigo or Ultimate Trucks with NO fancy CNC lightweight cut out work or Titanium Axles but this truck is mega strong & is definitly the option for the large sized adult riders!

To compliment the Superior strength of a Solid hanger body, the ATB INFINITY Hanger is fitted with SOLID 12mm STEEL Axles. Prior to being machine fitting, the 12mm Solid Axles are HEAT TREATED. Heat treating steel makes it substantially stronger, more resistant to impact & less prone to rust. 12mm Solid Axles are without doubt the strongest Axles in the TRAMPA range.  

The Infinity Hanger is connected to an EXTRUDEDT6 HEAT TREATED SOLID Aluminum INFINITY BASEPLATE & when assembled with the Heat Treated Steel Kingpin as it's name suggests the INFINITY ATB TRUCK is designed to last!!

TRAMPA's Infinity Hanger & Baseplate are machined with 2 Spring positions. Securing the springs in the inside position will give you easy steering which is really good for beginners struggling to steer or the crazy carvers out there love the loose steering, whilst positioning the springs into the outside position firms the steering resistance considerably & accopanying them by fitting the amazing TRAMPA DAMPAs ensures the Trucks are more suited to experience high speed or off road riding situations, or as is so commonly happening these days when fitted with Electric Motor Mounts :-)

TRAMPA's ATB Infinity Truck will interconnect with TRAMPA's Urban Motormounts as well as TRAMPA's Pro Motormount setup & of course all of TRAMPA's Wheel options from 5 Inch HYPA, SUPERSTAR Gummies through to 9 Inch Primo Wheels - Awesome!

Build your own Custom TRAMPA Wheel to fit to 12mm Axles - HYPA, SUPERSTAR, 8 Inch MEGASTAR, 9 Inch PRIMO or 9 INCH DEEP DISH MEGASTAR Wheels! Awesome selection from 5 Inch to 9 Inch, on & off road! Amazing!!

The 6 Spoke HYPA Wheel is the lightest & strongest plastic injected Hub / Wheel on the market today! Its produced using original DuPont ingredients & the best Injection Moulding machinery, no quality expense is spared during the production of this amazingly strong little hub!

During testing the HYPA Wheels performance surpassed all expectations. :-) This little 8 inch wheel proved to be so strong, when the "Crash Test Dummies" (i mean the Mountainboard Team Riders) inflated their tyres well beyond factory recommendations! (Tut-Tut Naughty-Naughty!) The extra inflation resulted in substantially faster roll speeds, giving them the extra time in the air to complete their huge freestyle moves & still have time land in 1 piece! I'm pleased to tell you there were no explosions from the over inflation to report whilst breaking a HYPA HUB is just about unheard of, something extraordinary has to go wrong before these hubs do! If you have seen some of the crazy stuff the MTB & KTB teams have put the equipment through over the years, with genuinely almost no problems to report, you will have no doubt of the HYPA WHEELS performance capabilities.

HYPA Hubs are available in loads of coordinating colour combinations its difficult to make the decision as to which option you like the most! You can choose from naked Matt Black or White to Painted Gloss Red or Gloss Blue with Painted Black or White TRAMPA Logo's or Printed in Winter or Army Camo, the choice is all yours... :-)

TRAMPA's HYPA hubs are held together using Marine Grade (A4) Stainless steel Nuts & Bolts & will never rust on you. Our bolts are perfect for bad conditions. Not only will the nuts & Bolts never rust on you all the Bolts used by TRAMPA have been dipped in a special Blue Locking Paste, whilst all the Nuts that TRAMPA uses are fitted with the world renowned Nyloc nylon nut locking system, all of these no expense spared small details ensure you get the absolute best product possible! To help prevent you from purchasing imitations, TRAMPA's HYPA Hubs are always TRAMPA embossed between the spokes proving our top quality! 

Your tyre requirements will be defined by the surface you are riding on, however you will be pleased to read that all of the HYPA Hubs will fit into any of the 7 inch Tyres or 8 Inch Tyres on the TRAMPA website. TRAMPA Hubs are also compatible with all known 8 Inch Tyres that are currently on the market, including any other Mountainboard or Dirt Scooter brand.

TRAMPA’s very own & genuine ABEC 5 rated Bearings, push perfectly into the 'Centre Set' bearing housings either side of the hub. The bearings are supported internally by use of a 'Bearing Support Spacer' sitting on the axle in the middle of the hub, guaranteeing the position of the bearings & the smoothest spin rate possible. TRAMPA's Bearings will fit onto 9.525mm, 10mm & 12mm Axles. The metric measurement of 9.525mm, is equal to the US Imperial measurement 3/8ths of 1 inch. Bearing Reducer Sleeves downsize your 12mm Bearings to fit onto 10mm Metric Scooter Axles or 9.525mm (3/8ths of an inch) Imperial Skate Axles. Bearings can be supplied at 50% of the usual retail price when purchased with a wheel... 2x Bearings cost just £2.50 per pair (usually £2.50 each), resulting in a £10 saving per set of 8x bearings, 8 bearings are enough for a set of 4 wheels!

TRAMPA's 200mm x 50mm - 8 Inch wonder wheels are the primary choice sized wheel for many inventors developing sporting equipment requiring very strong whilst very light weight, small pneumatic wheels for their applications to work correctly. Mountainboards, Kiteboards, 2Wheel, Dirt-Scooters, Bikes Skates, Sledges, Trikes, Skikes, Model Planes, Single Seater Planes, Dog Sledding, Dirt Skiing, Transportation Chariots & now lots of exciting electronic applications all due to come to the market very soon, all require an 8 inch wheel for their best movement... If you have a wheeled project on the go & you would like to fit TRAMPA's 8 inch wheels onto it, then in your design you need to use a 12mm axle & you will need to give an axle mounting space of 34.2mm in order to fit the TRAMPA Hubs correctly.

CUSTOM BINDINGS - Build your own Bindings & colour combo!

RATCHET BINDINGS are the Mountain Board rider’s primary choice of binding! The Ratchet Buckle mechanism allows you to easily position the binding to fit most adult sized shoes or boots. There is a release clip on the top of the Ratchet Buckle which works just the same as snowboard binding does, that release the pressure & allows you to step out...

The main Foot-Strap has a special 'Lug or locator' on the top of the Foot-Strap to house a special Hook that protrudes from the underside of Ratchet Buckle. This hook presses into the 'Lug' on the top of the Foot-strap preventing any sideways movement in the connection of the Strap & Ratchet Buckle

The Ratchet Buckle connects with a special M5 Star nut & M5x8mm Countersunk bolt & the Ratchet is mounted on the top of the Main Foot Strap. The LADDER STRAP Positions on the outside of the foot & feeds into the Ratchet Buckle. Levering the Ratchet buckle brings the two straps together. The Ratchet Buckle locks each time you lift the buckle tightening the two straps together until you have a snug but not tight connection over the top of your foot. The release clip can be tuff to move specially of your bindings have been ratcheted tight.

Ratchet Bindings work at their absolute optimum when combined with TRAMPA Heel StrapsHEEL STRAPS Completely lock your feet into any of the TRAMPA bindings to make you feel at one with the deck. When using Heel Straps you are 100% committed to the ride & by doing so you gain so much more control over the board.  

With 3 pairs of different length Ladder Straps to choose from, the TRAMPA Heel Straps easily adjust to fit to any sized shoe that comfortably fits onto a Mountain Board . A CAMLOCK BUCKLE on one side of the strap is used to Lock the Ladder Strap on one side of your foot whilst a Ratchet Buckle is used on the other side for easy tightening/loosening adjustment. The Ratchet Buckle easily tightens the Ladder into the Heel Straps so that your foot is locked into a comfortable position!. 

TRAMPA Heel Straps are universally fitting and are supplied with a Marine Grade Stainless Steel FITTING KIT as standard, so only take a few minutes to assemble. 

ALL TRAMPA Bindings are assembled using a Marine grade A4 Stainless Steel hardware. The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require.

All TRAMPA bindings use Stainless steel Dome Headed Bolts, connected through the Footstrap into L-Brackets, ensuring no discomfort to the foot. 

The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require 

TRAMPA's huge range of bindings are the most customisable on the market - meaning you’ll be able to get the perfect fit for your riding style - in any colour scheme you can think up.   

Complete Deck Weight

Weight Based on 35° 9/69 Deck 14 ply 15 ply 16 ply 17 ply 18 ply
Blank Deck Weight 2,652g 2,852g 3,052g 3,252g 3,452g
Component Weight 4,633g 4,633g 4,633g 4,633g 4,633g
Complete Deck Weight 7.3 kg 7.5 kg 7.7 kg 7.9 kg 8.1 kg

Component Weights

INFINITY ATB Truck - SOLID Hanger with SOLID 12mm STEEL Axles 2,004g
Any Custom combination of Hub or Tyre that fits to 12mm Axles1,892g
CUSTOM BINDINGS - Build your own Bindings & colour combo!553g
ABEC 7 Mountainboard Bearings fitting to all TRAMPA Wheels184g
Total component weight4,633g
INFINITY ATB Mountainboard Truck - 16 inch wide with 12mm SOLID Axles with Infinity Baseplate & Steel kingpin
CUSTOM BINDINGS - Build your own Bindings & colour combo!
Build your own Custom TRAMPA Wheel to fit to 12mm Axles - HYPA, SUPERSTAR, 8 Inch MEGASTAR, 9 Inch PRIMO or 9 INCH DEEP DISH MEGASTAR Wheels! Awesome selection from 5 Inch to 9 Inch, on & off road! Amazing!!
TRAMPA 35° 9/69 Un-Breakable Mountainboard Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Hex Head Bolt kit

Blank deck weight chart

Weight Based on 35° 9/69 Deck 14 ply 15 ply 16 ply 17 ply 18 ply
Blank Deck Weight 2,652g 2,852g 3,052g 3,252g 3,452g
General Flex Rating flexi firm stiff very stiff
This TRAMPA Mountainboard is made of the following components :-)
1x Custom 35° Mountainboard Deck - Drilled, Gripped with Stainless Bolts etc
2x INFINITY ATB Truck - SOLID Hanger with SOLID 12mm STEEL Axles
4x Any Custom combination of Hub or Tyre that fits to 12mm Axles
1x CUSTOM BINDINGS - Build your own Bindings & colour combo!
1x ABEC 7 Mountainboard Bearings fitting to all TRAMPA Wheels
Which Trucks do you want?
Which Trucks do you want?

INFINITY Mountainboard - 12mm SOLID Axles (£470)
INFINITY Mountainboard - 12mm SOLID Axles  (£470)

ULTIMATE Mountainboard 9.525mm TITANIUM Axles (£530) (out of stock)
ULTIMATE Mountainboard 9.525mm TITANIUM Axles  (£530) (out of stock)

INFINITY Mountainboard CNC - 12mm SOLID Axles (£500)
INFINITY Mountainboard CNC - 12mm SOLID Axles  (£500)

VERTIGO Mountainboard CNC & 12mm HOLLOW Axles (£530)
VERTIGO Mountainboard CNC & 12mm HOLLOW Axles  (£530)

ULTIMATE Mountainboard CNC & 9.525mm TITANIUM Axles (£560)
ULTIMATE Mountainboard CNC & 9.525mm TITANIUM Axles  (£560)

SAVAGE Mountainboard & SOLID CR-MO Axles (£600)
SAVAGE Mountainboard & SOLID CR-MO Axles  (£600)

TRAMPA-IR Mountainboard - 12mm SOLID Axles £600+ (£600)
TRAMPA-IR Mountainboard - 12mm SOLID Axles £600+ (£600)

TRAMPA MAGURA HS-11 Brake Board (£625)
TRAMPA MAGURA HS-11 Brake Board  (£625)

Please select what Shape Deck you would like
Please select what Shape Deck you would like

9/69 35º Mountainboard Deck

9/69 35º Mountainboard Deck with WINGS (+£40)

9/69 35º Electric MTB Deck with WINGS & 2WD (+£55)

9/69 35º Electric MTB Deck with WINGS & 4WD (+£70)

9/73 35º BigBoi Mountainboard Deck

9/73 35º BigBoi Mountainboard Deck with WINGS (+£40)

9/73 35º BigBoi Electric MTB Deck with WINGS 2WD (+£55)

9/73 35º BigBoi Electric MTB Deck with WINGS 4WD (+£70)

What colour Baseplate do you require...?
What colour Baseplate do you require...?

BLACK Anodised with SILVER logo Baseplate
BLACK Anodised with SILVER logo Baseplate

BLUE Anodised with BLACK logo Baseplate
BLUE Anodised with BLACK logo Baseplate

BRONZE Anodised with BLACK logo Baseplate
BRONZE Anodised with BLACK logo Baseplate

GOLD Anodised with BLACK logo Baseplate
GOLD Anodised with BLACK logo Baseplate

GREEN Anodised with BLACK logo Baseplate
GREEN Anodised with BLACK logo Baseplate

GUNMETAL Anodised with BLACK logo Baseplate
GUNMETAL Anodised with BLACK logo Baseplate

NAVY Powdercoated with BLACK logo Baseplate
NAVY Powdercoated with BLACK logo Baseplate

PINK Anodised with BLACK logo Baseplate
PINK Anodised with BLACK logo Baseplate

PURPLE Anodised with BLACK logo Baseplate
PURPLE Anodised with BLACK logo Baseplate

RED Anodised with BLACK logo Baseplate
RED Anodised with BLACK logo Baseplate

RED Powder-Coated with BLACK logo Baseplate
RED Powder-Coated with BLACK logo Baseplate

SILVER Anodised with BLACK logo Baseplate
SILVER Anodised with BLACK logo Baseplate

SILVER Anodised with BLACK logo INFINITY Baseplate
SILVER Anodised with BLACK logo INFINITY Baseplate

WHITE Powder-Coated with BLACK logo Baseplate
WHITE Powder-Coated with BLACK logo Baseplate

WHITE Powder-Coated with BLUE logo Baseplate
WHITE Powder-Coated with BLUE logo Baseplate

WHITE Powder-Coated with RED logo Baseplate
WHITE Powder-Coated with RED logo Baseplate

Please select which Hubs you want in the wheels?
Please select which Hubs you want in the wheels?

HYPA Hubs - up to 8 Inch tyres
HYPA Hubs - up to 8 Inch tyres

PHATLADS Hubs - up to 10 Inch tyres (+£30)
PHATLADS Hubs - up to 10 Inch tyres (+£30)

PRIMO 3 spoke Hubs - up to 10 Inch tyres
PRIMO 3 spoke Hubs - up to 10 Inch tyres

SUPERSTAR Hubs - up to 8 Inch tyres (+£50)
SUPERSTAR Hubs - up to 8 Inch tyres (+£50)

CENTER-SET MEGASTAR 8 Hubs - up to 8 Inch tyres (+£130)
CENTER-SET MEGASTAR 8 Hubs - up to 8 Inch tyres (+£130)

OFF-SET MEGASTAR 8 Hubs - up to 8 Inch tyres (+£130)
OFF-SET MEGASTAR 8 Hubs - up to 8 Inch tyres (+£130)

DEEP-DISH MEGASTAR 8 Hubs - up to 8 Inch tyres (+£150)
DEEP-DISH MEGASTAR 8 Hubs - up to 8 Inch tyres (+£150)

OFF-SET MEGASTAR 9 hubs - up to 10 Inch tyres (+£170)
OFF-SET MEGASTAR 9 hubs - up to 10 Inch tyres (+£170)

DEEP-DISH MEGASTAR 9 Hubs - 9 & 10 Inch tyres (+£185)
DEEP-DISH MEGASTAR 9 Hubs - 9 & 10 Inch tyres (+£185)

Which colour Bearings do you want?
Which colour Bearings do you want?

RED 6001-2RS ATB Bearings fits to 12mm Axles
RED 6001-2RS ATB Bearings fits to 12mm Axles

BLUE 6001-2RS ATB Bearings fits to 12mm Axles
BLUE 6001-2RS ATB Bearings fits to 12mm Axles

BLACK 6001-2RS ATB Bearings fits to 12mm Axles
BLACK 6001-2RS ATB Bearings fits to 12mm Axles

GREEN Ceramic ATB Bearings fits to 12mm Axles (+£25)
GREEN Ceramic ATB Bearings fits to 12mm Axles (+£25)

What Style of Bindings do you want?
What Style of Bindings do you want?

RATCHET Style Bindings please
RATCHET Style Bindings please

VELCRO Style Bindings please
VELCRO Style Bindings please

CAMLOCK Style Bindings please
CAMLOCK Style Bindings please

LUXURY VELCRO Style Bindings please
LUXURY VELCRO Style Bindings please

I DONT WANT Any Bindings thanks (-£40)

If you order a Luxury Board Bag with your deck then we will assemble your deck & send the complete board in the bag so it arrives ready to ride... Otherwise, to save space & ensure safe transit, your deck will be sent in component form & will require assembly (very simple to do) before it can be ridden.

Need a Bag to store your board in?
Need a Bag to store your board in?

Muck Off Bag - 20% Discounted! (+£18.75)

Luxury Travel Bag - 20% Discounted! (+£82.50)

Muck Off & Travel Bag - more than 25% Discounted! (+£100)

NO Bags Thanks :-)

Quantity required:
We have enough parts to make…  
RRP £470 - per deck

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon