This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

TRAMPA Magura HS-11 Brake Board uses MAGURA's Hydraulic Brake system modified to fit onto VERTIGO Trucks & supplied as standard with SUPERSTAR wheels

TRAMPA Magura HS-11 Brake Board uses MAGURA's Hydraulic Brake system modified to fit onto VERTIGO Trucks & supplied as standard with SUPERSTAR wheels TRAMPA 35° 9/69 Un-Breakable Mountainboard Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Hex Head Bolt kit INFINITY TRUCK wearing MAGURA Hydraulic Brakes with CUSTOM Disks to fit any 5 Spoke TRAMPA Wheels CUSTOM 8 inch SUPERSTAR WHEEL - BUILD YOUR OWN CUSTOM MADE 8 inch wheel CUSTOM 8 inch SUPERSTAR WHEEL - BUILD YOUR OWN CUSTOM MADE 8 inch wheel CUSTOM 8 inch SUPERSTAR WHEEL - BUILD YOUR OWN CUSTOM MADE 8 inch wheel CUSTOM BINDINGS - Build your own Bindings & colour combo!
RRP
£625+
schematic

flexometer

35º Mountainboards will fit to Spring Trucks

INFINITY TRUCK wearing MAGURA Hydraulic Brakes with CUSTOM Disks to fit any 5 Spoke TRAMPA Wheels

TRAMPA's MAGURA HS 11 BRAKE system is an incredibly powerful braking system developed solely for the TRAMPA Trucks. The MAGURA Brakes give you the ability to transform your riding range, making terrain you had previously thought of as 'Off Limits' into new & easily ride-able or even dream-able terrain you just have to ride! You will quickly gain a new air of confidence in your ability by riding with the MAGURA Hydraulic brake system!

By gently squeezing the hand held brake lever this incredibly powerful braking system will progressively slow you to a halt or squeeze hard & it will skid you to a stop! Squeezing the HAND HELD BRAKE LEVER forces the MAGURA BLOOD (hydraulic fluid) through the pipe system, equally pushing the BRAKE PADS onto both of the 5mm thick Aluminum BRAKE DISKS at the same time. 10mm Brake disk mounting spacers position the Brake Disks perfectly against the mega-strong T6 Heat Treated SPOKES supplying plenty of space either side either side of the disk gaining good ventilation, maintaining cool operating temperatures & therefore eliminating Brake fade over prolonged periods of use such as long Alpine descents...

MAGURA are a famous German company producing Hydraulic Braking Systems. The HS-11 Hydraulic Brakes are MAGURA's original Hydraulic braking system. MAGURA have had over 40 years of testing with this equipment in all kinds of terrain on all kinds of wheeled vehicles. The HS-11 setup is time tested & well proven to be perfect for our Mountainboarding applications - specially when modified & fitted to the immense TRAMPA TRUCKS & SUPERSTAR RIMS.

TRAMPA's MAGURA HS 11 - INFINITY BRAKE Truck is an incredibly powerful braking system developed solely for the TRAMPA Trucks. This Braking System will certainly slow you down or stop you dead, which ever you should choose & depending on how hard you squeeze the lever! The MAGURA Brakes give you the ability to transform your riding range, making terrain you had previously thought of as 'Off Limits' into new & easily ride-able or even dream-able terrain you just have to ride! You will quickly gain a new air of confidence in your ability by riding with the MAGURA Hydraulic brake system!

By gently squeezing the hand held brake lever this incredibly powerful braking system will progressively slow you to a halt or squeeze hard & it will skid you to a stop! Squeezing the HAND HELD BRAKE LEVER forces the MAGURA BLOOD (hydraulic fluid) through the pipe system, equally pushing the BRAKE PADS onto both of the 5mm thick Aluminum BRAKE DISKS at the same time. 10mm Brake disk mounting spacers position the Brake Disks perfectly against the mega-strong T6 Heat Treated SPOKES supplying plenty of space either side either side of the disk gaining good ventilation, maintaining cool operating temperatures & therefore eliminating Brake fade over prolonged periods of use such as long Alpine descents...

MAGURA are a famous German company producing Hydraulic Braking Systems. The HS 11 Hydraulic Brakes are MAGURA's original Hydraulic braking system. MAGURA have had over 30 years of testing with this equipment in all kinds of terrain on all kinds of wheeled vehicles. The HS 11 setup is time tested & well proven to be perfect for our Mountain boarding applications - especially when modified & connected to the immense TRAMPA TRUCKS & SUPERSTAR WHEELS.

The TRAMPA INFINITY truck is the strongest SPRING TRUCK in the product range! To ensure the maximum strength possible the hanger is made from FORGED ALUMINUM & it's one solid piece! The INFINITY Hanger is fitted with 12mm SOLID STEEL Axles. The 12mm Solid Axles are HEAT TREATED. Heat treating steel makes it substantially stronger, more resistant to impact & less prone to rust. 12mm Solid Axles are without doubt the strongest Axles in the TRAMPA range. The Axles are first Glued & then Screwed with a Marine Grade Stainless Steel Grub Screw locking them in the perfect position to mount your wheel too. The Hanger is connected to an EXTRUDED & T6 HEAT TREATED Aluminum BASEPLATE & as it's name suggests the INFINITY HS-11 TRUCK is designed to last forever!!

CUSTOM 8 inch SUPERSTAR WHEEL - BUILD YOUR OWN CUSTOM MADE 8 inch wheel

TRAMPA's SUPERSTAR Wheel is a technically designed super strengthened masterpiece of circular lushness! It is created for those who insist on fitting only the very best equipment! The SUPERSTAR handles the highest inflation pressures of any 8 inch wheel on the market, increasing roll speeds, making them perfect for the insane! SUPERSTAR Hubs are available in loads of different Rim & Spoke combinations its difficult to decide the combination you like the most!

Top Quality Plastic Injection machinery & original DuPont materials (DuPont are the Best) are used to create the high-tech Rim, whilst the Spokes use Extruded 6061 Aluminum that's been T6 Heat treated (Super Strengthened Aero-grade quality) which is all constructed using A4 (Marine Grade) Stainless Steel Nuts & Bolts. Total & absolute product perfection!

SUPERSTAR Hubs are compatible with all known 8 inch tyres on the marke! Disk Brakes & Drive Gears for Electric motors can also be fitted to these amazing SUPERSTAR wheels... Watch this space for Hot NEWS on E-TRAMPA...  Bearings can be purchased at a discounted price when purchased with a wheel. 2x Bearings cost only £2.50 = £10 per set of 8 making a £10 saving per set!

CUSTOM BINDINGS - Build your own Bindings & colour combo!

RATCHET BINDINGS are the Mountain Board rider’s primary choice of binding! The Ratchet Buckle mechanism allows you to easily position the binding to fit most adult sized shoes or boots. There is a release clip on the top of the Ratchet Buckle which works just the same as snowboard binding does, that release the pressure & allows you to step out...

The main Foot-Strap has a special 'Lug or locator' on the top of the Foot-Strap to house a special Hook that protrudes from the underside of Ratchet Buckle. This hook presses into the 'Lug' on the top of the Foot-strap preventing any sideways movement in the connection of the Strap & Ratchet Buckle

The Ratchet Buckle connects with a special M5 Star nut & M5x8mm Countersunk bolt & the Ratchet is mounted on the top of the Main Foot Strap. The LADDER STRAP Positions on the outside of the foot & feeds into the Ratchet Buckle. Levering the Ratchet buckle brings the two straps together. The Ratchet Buckle locks each time you lift the buckle tightening the two straps together until you have a snug but not tight connection over the top of your foot. The release clip can be tuff to move specially of your bindings have been ratcheted tight.

Ratchet Bindings work at their absolute optimum when combined with TRAMPA Heel StrapsHEEL STRAPS Completely lock your feet into any of the TRAMPA bindings to make you feel at one with the deck. When using Heel Straps you are 100% committed to the ride & by doing so you gain so much more control over the board.  

With 3 pairs of different length Ladder Straps to choose from, the TRAMPA Heel Straps easily adjust to fit to any sized shoe that comfortably fits onto a Mountain Board . A CAMLOCK BUCKLE on one side of the strap is used to Lock the Ladder Strap on one side of your foot whilst a Ratchet Buckle is used on the other side for easy tightening/loosening adjustment. The Ratchet Buckle easily tightens the Ladder into the Heel Straps so that your foot is locked into a comfortable position!. 

TRAMPA Heel Straps are universally fitting and are supplied with a Marine Grade Stainless Steel FITTING KIT as standard, so only take a few minutes to assemble. 

ALL TRAMPA Bindings are assembled using a Marine grade A4 Stainless Steel hardware. The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require.

All TRAMPA bindings use Stainless steel Dome Headed Bolts, connected through the Footstrap into L-Brackets, ensuring no discomfort to the foot. 

The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require 

TRAMPA's huge range of bindings are the most customisable on the market - meaning you’ll be able to get the perfect fit for your riding style - in any colour scheme you can think up.   

Complete Deck Weight

Weight Based on 35° 9/69 Deck 14 ply 15 ply 16 ply 17 ply 18 ply
Blank Deck Weight 2,652g 2,852g 3,052g 3,252g 3,452g
Component Weight 5,139g 5,139g 5,139g 5,139g 5,139g
Complete Deck Weight 7.8 kg 8.0 kg 8.2 kg 8.4 kg 8.6 kg

Component Weights

INFINITY Truck - MAGURA Hydraulics Brakes & Disks 1,589g
INFINITY ATB Truck - SOLID Hanger with SOLID 12mm STEEL Axles 1,002g
CUSTOM SUPERSTAR WHEEL - BUILD YOUR OWN 8 inch wheel1,995g
CUSTOM BINDINGS - Build your own Bindings & colour combo!553g
Total component weight5,139g
INFINITY TRUCK wearing MAGURA Hydraulic Brakes with CUSTOM Disks to fit any 5 Spoke TRAMPA Wheels
CUSTOM BINDINGS - Build your own Bindings & colour combo!
CUSTOM 8 inch SUPERSTAR WHEEL - BUILD YOUR OWN CUSTOM MADE 8 inch wheel
TRAMPA 35° 9/69 Un-Breakable Mountainboard Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Hex Head Bolt kit

Blank deck weight chart

Weight Based on 35° 9/69 Deck 14 ply 15 ply 16 ply 17 ply 18 ply
Blank Deck Weight 2,652g 2,852g 3,052g 3,252g 3,452g
General Flex Rating flexi firm stiff very stiff
This TRAMPA Mountainboard is made of the following components :-)
1x Custom 35° Mountainboard Deck - Drilled, Gripped with Stainless Bolts etc
1x INFINITY Truck - MAGURA Hydraulics Brakes & Disks
1x INFINITY ATB Truck - SOLID Hanger with SOLID 12mm STEEL Axles
4x CUSTOM SUPERSTAR WHEEL - BUILD YOUR OWN 8 inch wheel
1x CUSTOM BINDINGS - Build your own Bindings & colour combo!

Any of the Decks in the drop down below will work with the special HANGER that is required for mounting the Brakes.

Please select what Shape Deck you would like
Please select what Shape Deck you would like

9/69 35º Mountainboard Deck - NO WINGS
9/69 35º Mountainboard Deck - NO WINGS

9/69 35º Mountainboard Deck with WINGS (+£40)
9/69 35º Mountainboard Deck with WINGS (+£40)

9/69 35º Mountainboard Deck with WINGS & 2WD (+£55)
9/69 35º Mountainboard Deck with WINGS & 2WD (+£55)

9/73 35º BigBoi Mountainboard Deck
9/73 35º BigBoi Mountainboard Deck

9/73 35º BigBoi Mountainboard Deck with WINGS (+£40)
9/73 35º BigBoi Mountainboard Deck with WINGS (+£40)

9/73 35º BigBoi Mountainboard Deck with WINGS 2WD (+£55)
9/73 35º BigBoi Mountainboard Deck with WINGS 2WD (+£55)

Would you like to upgrade to Vented disks?
Would you like to upgrade to Vented disks?

NO Thanks - Solid Disks Please
NO Thanks - Solid Disks Please

Yes Please - Vented Disks (+£7.50)
Yes Please - Vented Disks (+£7.50)

Which Brake Hanger Do you require?
Which Brake Hanger Do you require?

INFINITY Brake Hanger
INFINITY Brake Hanger

VERTIGO Brake Hanger(+£25)
VERTIGO Brake Hanger(+£25)

Do you want PHATLADS, SUPERSTAR or MEGASTAR hubs?
Do you want PHATLADS, SUPERSTAR or MEGASTAR hubs?

5 Spoke PHATLADS Hubs
5 Spoke PHATLADS Hubs

5 Spoke SUPERSTAR Hubs (+£20)
5 Spoke SUPERSTAR Hubs (+£20)

5 Spoke CENTRE-SET MEGASTAR 8 Rims (+£65)
5 Spoke CENTRE-SET MEGASTAR 8 Rims (+£65)

5 Spoke OFF-SET MEGASTAR 8 Rims (+£65)
5 Spoke OFF-SET MEGASTAR 8 Rims (+£65)

5 Spoke DEEP-DISH MEGASTAR 8 Rims (+£75)
5 Spoke DEEP-DISH MEGASTAR 8 Rims (+£75)

5 Spoke OFF-SET MEGASTAR 9 Rims (+£80)
5 Spoke OFF-SET MEGASTAR 9 Rims (+£80)

5 Spoke DEEP-DISH MEGASTAR 9 Rims (+£90)
5 Spoke DEEP-DISH MEGASTAR 9 Rims (+£90)

Which Wheels do you want fitting to the REAR of your deck
Which Wheels do you want fitting to the REAR of your deck

6 Spoke HYPA Wheels on the REAR
6 Spoke HYPA Wheels on the REAR

3 Spoke PRIMO Wheels on the REAR
3 Spoke PRIMO Wheels on the REAR

5 Spoke PHATLADS Wheels on the REAR (+£15)
5 Spoke PHATLADS Wheels on the REAR (+£15)

5 Spoke SUPERSTAR Wheels on the REAR (+£30)
5 Spoke SUPERSTAR Wheels on the REAR (+£30)

5 Spoke CENTRE-SET MEGASTAR 8 Wheels on the REAR (+£65)
5 Spoke CENTRE-SET MEGASTAR 8 Wheels on the REAR (+£65)

5 Spoke OFF-SET MEGASTAR 8 Wheels on the REAR (+£65)
5 Spoke OFF-SET MEGASTAR 8 Wheels on the REAR (+£65)

5 Spoke DEEP-DISH MEGASTAR 8 Wheels on the REAR (+£75)
5 Spoke DEEP-DISH MEGASTAR 8 Wheels on the REAR (+£75)

5 Spoke OFF-SET MEGASTAR 9 Wheels on the REAR (+£75)
5 Spoke OFF-SET MEGASTAR 9 Wheels on the REAR (+£75)

5 Spoke DEEP-DISH MEGASTAR 9 Wheels on the REAR (+£90)
5 Spoke DEEP-DISH MEGASTAR 9 Wheels on the REAR (+£90)

What Style of Bindings do you want?
What Style of Bindings do you want?

RATCHET Style Bindings please
RATCHET Style Bindings please

VELCRO Style Bindings please
VELCRO Style Bindings please

CAMLOCK Style Bindings please
CAMLOCK Style Bindings please

LUXURY VELCRO Style Bindings please
LUXURY VELCRO Style Bindings please

I DONT WANT Any Bindings thanks (-£40)