Home»WHEELS HUBS TYRES & BEARINGS»Complete Wheels - By Tyre Size»8 Inch Wheels»SUPERSTAR WHEELS 8 Inch Tyres »Carbon Print Rim Gunmetal Spokes & Mud Plugger 8 Inch Tyre

How to put a wheel on an Infinity or Vertigo truck

How to put a wheel on an Ultimate Truck

TRAMPA's SUPERSTAR wheel is a beautiful & technically designed masterpiece, created for those who insist on fitting only the finest of equipment.

The split Rim of the SUPERSTAR hub has been manufactured using original DuPont & the very latest in precision injection molding machinary (only the best will do!), whilst the Extruded Aluminum Spokes are T6 Heat-treated (T6 heat treating makes the extruded aluminum exceptionally strong), Anodised & finally CNC precision milled to fit the TRAMPA Bearings perfectly. 

Separated & supported by a chunky nylon Spoke Support Spacer, the Heat-treated spokes simply push into the rim during assembly. The SUPERSTARS construction is held together with Marine Grade Stainless steel fixings  M4x40mm. This incredible top quality combination makes all the difference to the user compared to the competition as the SUPERSTAR hub will not fail on you. It can handle incredibly high inflation pressures.... It is what we believe to be the best/strongest 3.75 Inch hub on the market today!

The SUPERSTAR wheel is available in hundreds of different Rim, Spoke & 8 Inch Tyre colour combinations, its difficult to choose your favorite, but you can have your SUPERSTAR wheels with 8 inch tyres in any combination you like...

Constructed (as expected from TRAMPA) using only the finest fixings available which means all TRAMPA parts, including these wheels, are constructed using Marine grade Stainless steel that have all been brushed with Blue locking paste to ensure the most secure of fixings. All Nuts used also have a Nylock sleeve to ensure double quality & effective secure fixing! A 3mm Alan Key & a 7mm spanner are all the tools you need to construct or service your hubs.

Trampa’s own top quality steel Bearings, genuine ABEC 5 rated, fit perfectly into the CNC precision milled spokes, preventing any wobble & enabling the hub the fastest spin rate possible. When purchasing bearings with the hubs the bearings can be purchased for as little as £1.25 each making a £5 saving per set of 8.

Along with many other wheeled applications, the SUPERSTAR hub will fit to ALL other brands of mountainboards on the market including MBS SCRUB & KHEO. Basically the SUPERSTAR wheels will fit to anything with a 9.52mm (imperial), 10mm or 12mm axle. There are conversion spacers available for you to convert your existing 12mm bearings to work on 9.55mm skate axles (7/16ths Imperial) or 10mm (metric) scooter axles (see associated parts for details).

Due to the fantastic design & the use of top quality materials in these hubs, the finished product has ended up being exceptionally strong. This extra strength allows the rider to inflate their tyres well beyond normal recommended pressures, which in turn increases the top end roll speeds. We shouldn’t go recommending that you go over inflating your tires but if you are ever going to do it you will be safe in the knowledge that these hubs can handle the pressure that other hubs cant. During testing it was common for our Crash Test Dummis (I mean Trampa Team riders) to inflate as high as 100psi, and in some cases (Joel!) well beyond!!

M4 x 40mm Socket Capped Allen-Key Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 40mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special Bolt is specifically made for TRAMPA & is used to assemble the TRAMPA SUPERSTAR HUBS. The socket capped head of the Bolt screws neatly though the Spokes & into the fixing point in the Rim of the SUPERSTAR HUB eventually screwing  into the M4 nut on the other side easly.

Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

USED FOR CONNECTING:  

SUPERSTAR HUBS       
MEGASTAR HUBS       
PHATLADS HUBS

M4 Nyloc Nut - Marine Grade stainless steel Nylock Nut - Hub Nuts

Introducing TRAMPA's M4 (4mm Shaft) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M4 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts. 

This Nut is used to fix to tighten to the M4 Socket Capped Bolts that hold the HYPA & SUPERSTAR hubs together. To fit the nuts M4 use an 8mm spanner or  8mm Ratchet Socket to turn the Nut onto the Bolt whilst holding the bolt with a 3mm Allen Key. Always ensure your Nuts & Bolts are tight before you ride!

8 Inch Inner Tube INNOVA 8x2 inch 200x50mm - fits 3.75 inch Rims & 8 inch tyres

INNOVA's Re-enforced 8 Inch inner tube measures 200mm x 50mm and will fit into all the of the 8 inch Tyres on the website. INNOVA's 8 Inch Inner Tube also fits into the tyres of all other brands measuring 8 Inches inflated.

Being made from slightly thicker rubber, this Inner Tube is slightly heavier than alternatives but this INNOVA Inner Tube will handle much higher than recommended inflation rates... Therefore this INNOVA inner tube is the ideal tube for heavier or Pro Riders seeking to achieve higher than recommended inflation pressures...

This INNOVA Inner tube will fit into all known 8 inch tyres as well as most ATB hubs on the market. It comes as expected with an anti dust valve cap! Punctures Suck! Its always possible to get a puncture in the environments we ride in, so always carry a spare if you don't want your day spoiling...

Genuine SUPERSTAR CENTER-SET Rim 3.75x 2 Inch fits all 3.75 Inch Tyres - CARBON print

TRAMPA's SUPERSTAR Hub is a technically designed super-strength masterpiece of circular lushness & has been created for those who insist on fitting only the very best equipment! SUPERSTAR Hubs are available in loads of different Rim & Spoke colour combinations, its almost impossible to decide the combination you like the most!

The SUPERSTAR hub handles the highest inflation pressures on the market, which in turn increases roll speeds giving the rider the advantage over the competition, making them perfect for the best riders, i mean the insane! SUPERSTAR Rims are produced using original 'DuPont' materials (the best), whilst the STAR SPOKES are made using a custom made mould to give us an Extruded Aluminum profile that gets T6 Heat treated (Super Strength Aero-grade quality) & then sliced to requirement.

The SUPERSTAR Hub/wheel is fully constructed using A4 (Marine Grade) Stainless Steel Nuts & Bolts. Total & absolute product perfection!

SUPERSTAR Hubs are compatible with any tyre that TRAMPA offers up to 8 inches in size!

Disk Brakes for steep free-ride riding & Drive Gears for Electric boards or Electric motors can also be fitted to these amazing SUPERSTAR wheels... 

Bearings can be purchased at a discounted price when purchased with complete Hubs or wheels.

GUNMETAL Anodised CLASSIC 5 SPOKE - Extruded T6 Aluminum Heat treated & CNC Precision milled fits all SUPERSTAR & MEGASTAR Wheels

TRAMPA SPOKES fit all SUPERSTAR & MEGASTAR Hubs. TRAMPA's Spokes are produced using the finest 6061 'Aero-Grade' Aluminum, which to maximise strength & performance are produced with the use of an Extrusion Die, which means TRAMPA spokes are made in one continuous piece before being sliced like bread to the required thickness. Before being sliced the extruded profile is T6 Heat Treated making the resulting Alloy extremely strong. 

Once sliced the Raw Spokes are sent to the CNC machine to mill out the bearing housing perfectly. Before being anodised the spokes are bead polished which not only gives a top quality finish but also removes all & any sharp edges, then finally sent away to the Anodisers to have the relevant striking colours added for top surface protection.

Check your spoke support spacers, O-Rings and hardware are in good condition when changing spokes & ensure all of your nuts & bolts are tight before you ride!

CUSTOM Spoke Support spacer - Installing a Spoke Support Conversin Spacer allowsyou to fit SUPERSTAR or MEGASTAR hubs to 9.525mm & 8mm Axles such as Evolve, Boosted & many others

This is the TRAMPA SUPERSTAR Spoke Support Spacer. It is used to gain extra strength for the SUPERSTAR wheel design by adding support to the Aluminum Spokes when the wheel is being used under high inflated pressures...

Precision injection moulded, using original DuPont materials, this Spacer provides essential support for the Spokes in the Superstar hubs. There is a Deep Shelf on the Rim of the Spacer which pushes into the internal side of the Spoke, positioning the Spacer/spoke perfectly for assembly. The thick plastic ensures a very strong support platform maximising Bearing support & spin rate always....

Ensure all your nuts & bolts are tight before riding!!

TRAMPA MUD-PLUGGER 8 Inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs - BLACK

TRAMPA's 8 Inch MUD-PLUGGER Tyre is a super advanced & incredibly lightweight tyre that fits all the 3.75 inch hubs on the market. It is the perfect tyre choice when your when riding in the worst of conditions, seeking the maximum grip possible!! 

Measuring 8x 2 Inch or 200mm x 50mm with a 3.75 Inch Rim,  the MUD-PLUGGER tyre has a box shaped construction, whilst the 2PR 'soft compound' rubber coating has an aggressive & well spread tread pattern that see's 'Grip on top of Grip'. Making the Mud-Plugger tyre 'Box shaped', having much straighter sides for example compared to the kind of Ballon shape of the 8 inch ALPHA tyre, allows for much more 'Surface Contact' resulting in much more 'Traction' for the user.

Mud-Plugger tyres also have a 'Wide Center Bead' allowing good top end roll speeds but as it is so Deep Grooved (5mm at the deepest) & very 'knobbily' around its sides to cut through the deepest of mud, suggests the appearance of the TRAMPA Mud-Plugger tyre works best in really bad conditions more than straight line speed on Hard packed surfaces!

TRAMPA's 8 Inch Mud-Plugger tyre has 3.75 inch Steel Bands molded into rims of the tyre, therefore the 8 Inch Mud-Plugger tire will fit onto all 3.75 inch hubs & 3.75/4 inch hubs currently on the market.

To enhance grip capabilities to the max the Mud-Plugger Tyre is manufactured using a Soft Compound '2PR rubber' wrapped around whats known as a High TPI (Threads per Inch) construction. A High TPI results in a super lightweight, very supple yet strengthened construction that further enhances grip & is more resistant to punctures. High TPI is applied to all top quality bicycle tyres. 

Having invested into professional testing at the factory & using our own TRAMPA hubs to make the testing, the factory have given this tyre a recommended maximum inflation pressure of 65psi (BUT ONLY WHEN FITTED TO TRAMPA HUBS) which is much more than any other brand & testament to the design & superior strength of the TRAMPA HUBs! Its true, the more you inflate your tyres the faster you will roll but these are off road tyres & so its not always good to have high inflation! Over inflation of your tyres may cause an explosion which could cause serious injury to yourself, however running your tyres as low as 20-25psi (depending on how much you weigh and how you ride etc) is more likely to give you the best grip when riding in the soft stuff....