This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

OPEN BELT DRIVE E-MTB with 83 or 90mm STICKIES Wheels & 33 or 37 Tooth Pulleys - CUSTOM

OPEN BELT DRIVE E-MTB with 83 or 90mm STICKIES Wheels & 33 or 37 Tooth Pulleys - CUSTOM 2wd Electric Mountainboard Deck - CUSTOM 2wd Electric Mountainboard Deck 66T OBD Motor Mount & 33 / 37 tooth Pulley - TWIN 1x Custom TRAMPA DC Motor with BASIC Filters included 1x Custom TRAMPA DC Motor with BASIC Filters included VESC 6 MkVI - TRAMPA gives you Maximum power! VESC 6 MkVI - TRAMPA gives you Maximum power! VESC 6 MkVI - TRAMPA gives you Maximum power! VESC 6 MkVI - TRAMPA gives you Maximum power! CANBUS Cable 24 AWG  Silicon Yellow/White - 80mm VESC Connect NRF Wireless Dongle with INTERNAL Antenna MKIII NRF Dongle Extender cable 200mm Precision CNC ULTIMATE ATB TRUCK with CNC Motor Mount fixing points & TRAMPA Baseplate, TITANIUM Axles & Kingpin Classic MONSTER Box with Mounting Panel to fit 2x VESC 6 TRAMPA STICKIES Longboard WHEELS 83 or 90mm x set of 4 R6-2RS Abec 7 Bearings TRAMPA STREET CARVE  9.525mm Axels (9.525 x 22.225 x 7.14mm) x8 CUSTOM BINDINGS - Build your own Bindings & colour combo! Complete Deck TRAMPA Handmade VINYL Sticker Kit
From
£1,155+
flexometer

2wd Electric Mountainboard Deck - CUSTOM


 

Its your choice of Deck!! Taller riders, or riders with a long legs or riders who enjoy a wide stance, these riders should look to take take the 9/73 Deck fitted with WINGS. All other riders should take the 9/69 Deck fitted with Wings.

There are different flex Ply's in each both deck sizes to match the riders weight. The WINGS fix to the surface of the deck & allow the cables to be safely routed from the Monster Box, under the riders foot to the motors at the rear. The Wings are W Shape concave giving a comfortable feeling under-foot, they also increase the width of the deck from 9 to 10 inches...

TRAMPA Decks can be used for everything from Big-Air & Free-ride to Electric & kite boarding.    

TRAMPA's MOUNTAINBOARD DECKs have a fresh cut look over the original range of Mountainboard Decks. With a few simple modiciations to the cut out shape we have maxed out the stiffness of the shape as well as introduce the ability to be able to fit TRAMPA WINGS.

Whilst with the introduction of the 9/73 Deck Mountainboard deck has brought much relief to long legged riders! Produced from a complete new, it measures 4cm longer between the creases, in the foot stance area, which gives the taller riders or riders who love a wide stance all the space they need to spread their legs & finally ride comfy.

Both Decks can still used without WINGS if you do not wish to use them & as well as being used as a regular Mountainboard deck being ridden down a hill, the latest Mountain board shapes have been created more to perfect the fit with all of TRAMPA's incredible range of Motor Mounts, Battery boxes & Electrical products. 

WINGS are an injection moulded riser pads that are screwed through & then secured into the surface of the TRAMPA Deck. The WINGS have a foot-hugging W-shaped concave surface, enhancing comfort under the foot & increasing Grip on the surface. Underneath houses an integrated cable routing channel to allow for safe un-interferred under-foot cable routing from the battery boxes to the motors at the rear of the Deck.   

WINGS also increase the width of the deck from 9 to 10 inches!!! Being 10 Inches wide allows more comfort for a larger foot/shoe whilst adding extra leverage beneath the toes & heels, giving adult sized riders tighter turns & arguably deeper carving!   

TRAMPA decks are considered the strongest & the most customisable decks on the market! They are best used when installed as complete electric decks from TRAMPA & highly versatile for DIY'ers looking to mix things up.

Our Deck performance is un-matched by any other brand! Once cooked our impenetrable composite weave is so strong that the secret material will not split or break in anyway. They come with a life time guarantee. 

TRAMPA decks come in 2x lengths 9/69 & 9/73 & in several different Flex ply's (ply - the more layers of material added to the mould the stiffer the deck is) to accommodate any rider weight, in pretty much any environment, land, air & sea & regardless of which deck / ply you choose, or the environment that you use it in, because all TRAMPA Decks are sold as UN-BREAKABLE & to prove this we offer you a lifetime guarantee!   

The stiffness of a TRAMPA deck is measured in "Ply", referring to how many layers of the secret formula material are used to make the deck. The more ply added, the stiffer & heavier the deck will be, ranging from 14-18ply in the 9/69 decks and 17-18ply in the Longer 9/73. The number 9 in the name refers to the width of the deck being 9 inches, whilst the 69 or 73 refers to the length of Centimeters (CM's) in the foot stance area. Yes we realise that's mixing up CM's with Inches, but it sort of sounds nice.... The most important things is that with all the different deck ply options over the 2 lengths we offer there’s a perfect TRAMPA deck for everyone! 

TRAMPA decks are universally fitting, they can be drilled to fit all Truck or Binding systems known - this makes TRAMPA decks the perfect option when choosing an upgrade for your existing setup. 

Throughout years the riders have put them to their paces and still nobody has ever broken a TRAMPA deck! Please see the Flexometer guides to help you find your perfect deck.  

If you’re unsure as to what the best ply & deck is for you and would like some guidance then please fill in the "Which deck for is me questionnaire" by mailing this link.   

Precision CNC ULTIMATE ATB TRUCK with CNC Motor Mount fixing points & TRAMPA Baseplate, TITANIUM Axles & Kingpin

TRAMPA's ULTIMATE TRUCK is a slimmed down, super light-weight version of the original Infinity Truck BUT 30% lighter!! Made in exactly the same way, using CAST Alloy for the body of the HANGERit is CNC machined removing the bulk of the material, reducing weight substantially, without altering any of its critical strength. The ULTIMATE hanger is fitted with 9.525mm TITANIUM AXLES instead of the regular 12mm Solid Steel axles found on the INFINITY Trucks or the 12mm Hollow Steel Axles on the VERTIGO Truck. TITANIUM is 10 times stronger (when compared weight for weight) but weighs less than half the weight of steel!

The Alloy Hanger is attached to an Aerospace Grade Aluminum Baseplate. The Aluminum comes as a block & is rammed through an Extrusion mould, coming out the other side as one long piece a bit like Playdoh! It gets T6 HEAT TREATED gaining maximum molecular strength during the process, before the precision CNC machine goes to work creating the final shape & removing excess material reducing weight but not effecting any of its critical strength n the process.

The Hanger & Baseplate 'Kingpin Holes' are also CNC precision milled, insuring the Trucks assemble like a dream. Nylon Bushings are inserted into the Kingpin Holes supplying a flush connection, eliminating potential wear between the moving metal parts. The Titanium Kingpin pushes through the Kingpin Holes connecting the 2 integral parts together, allowing the steering to happen... Everything fixes together perfectly enabling the ULTIMATE TRUCKS to provide problem free precision riding! 

SPRINGS, loaded with TRAMPA DAMPA's are squeezed by hand, into the mounting positions between the Hanger & Baseplate. When anchored in position they give resistance to the steering. The steering resistance can be pre-set to your weight, riding ability & personal preference by changing the TRAMPA DAMPA to a stiffer/softer hardness. TRAMPA DAMPA's come in 5 different hardness's to suit all riding styles. The springs can also be ADJUSTED on the fly! By using a 4mm Allen Key you can further TUNE your steering by turning the SPRING ADJUSTER clockwise to give TIGHTER STEERING (fast riding) & turning anti-clockwise to give LOOSE STEERING (Carve riding). You can quickly adjust your board relevant to the conditions or terrain ahead... As your riding will improve over time you will demand more pre-tension from your steering, so don't over tighten your springs, instead change your Dampa's to something a little harder.

18.2mm spacers position the Wheels on the 9.525mm axles in the perfect location & 7/16ths of an Inch MGSS Half nuts screwed on at the end of the axle stop the wheel from working loose....

TRAMPA STICKIES Longboard WHEELS 83 or 90mm x set of 4

TRAMPA's incredible range of STICKIES Longboard Wheels have taken the world of Longboarding by storm! Produced using the highest grade of Ultra Premium Urethane, and available in either 83 or 90mm size options with a varying range of suitably colour co-ordinatied Urethane Hardnesses, the variety compliments all the different types of rider, covering all the different aspects of street riding. You will be pleased to learn STICKIES Longboard Wheels will fit to ALL Longboard, Street-board & Skateboard Trucks using 8 or 9.525mm Axles.

The re-enforced VENTED CORE of the STICKIES Wheel houses a Center-set bearing position. For those that don't know this means the bearings are housed centrally within the wheel. Being center-set ensures an even wear rate to the wheel ensuring maximum grip at all times, whilst guaranteeing a balanced "high speed spin-rate", thus making turning/sliding as predictable as possible! Not only does the vented core reduce weight, but it also increases airflow around the Bearings ensuring lower operating temperatures when running at high speeds...

The Vented Core also has an extra application... The Venting holes can be used in conjunction with a centering ring & some M4x40mm Socket Capped Bolts to lock into position, either a 33 or 37 Tooth Slave Wheel, to which the complete assembly can be connected to many applications using an electric motor, including the new TRAMPA Electric Longboards & Electric Street-Carver boards as well as many other products due onto the market soon!

Smothering the Vented Core of the STICKIES Longboard wheel is thick PREMIUM URETHANE. Choosing STICKIES will enable you to Carve & Turn like you have only ever dreamed of before, especially when mounted to the new TRAMPA Mini Spring Trucks which happen to turn & carve like nothing else! STIKIES Wheels will also fit to the new 12FIFTIES Trucks & all 8mm Longboard trucks on the Market.

The edges of all the STICKIES wheels are beautifully rounded allowing smooth transitional turns, whilst helping to avoid chipping & cracks at the same time. The rounded edge of the STICKIES wheel gives an overall contact surface of 50mm! Orbiting the outer edge of the BLUE STICKIES WHEEL is a coordinating BLACK TRAMPA logo.

STICKIES will accept regular skate size 608 2RS (8 x 22 x 7mm) bearings & made special for the TRAMPA Mini Spring Trucks, the R6 2RS (9.525 x 22,225 x 7.14mm) Bearings. All of TRAMPA's Longboard/Streetboard bearings are ABEC 7-9 rated & are designed for prolonged high speed use. 

CUSTOM BINDINGS - Build your own Bindings & colour combo!

RATCHET BINDINGS are the Mountain Board rider’s primary choice of binding! The Ratchet Buckle mechanism allows you to easily position the binding to fit most adult sized shoes or boots. There is a release clip on the top of the Ratchet Buckle which works just the same as snowboard binding does, that release the pressure & allows you to step out...

The main Foot-Strap has a special 'Lug or locator' on the top of the Foot-Strap to house a special Hook that protrudes from the underside of Ratchet Buckle. This hook presses into the 'Lug' on the top of the Foot-strap preventing any sideways movement in the connection of the Strap & Ratchet Buckle

The Ratchet Buckle connects with a special M5 Star nut & M5x8mm Countersunk bolt & the Ratchet is mounted on the top of the Main Foot Strap. The LADDER STRAP Positions on the outside of the foot & feeds into the Ratchet Buckle. Levering the Ratchet buckle brings the two straps together. The Ratchet Buckle locks each time you lift the buckle tightening the two straps together until you have a snug but not tight connection over the top of your foot. The release clip can be tuff to move specially of your bindings have been ratcheted tight.

Ratchet Bindings work at their absolute optimum when combined with TRAMPA Heel StrapsHEEL STRAPS Completely lock your feet into any of the TRAMPA bindings to make you feel at one with the deck. When using Heel Straps you are 100% committed to the ride & by doing so you gain so much more control over the board.  

With 3 pairs of different length Ladder Straps to choose from, the TRAMPA Heel Straps easily adjust to fit to any sized shoe that comfortably fits onto a Mountain Board . A CAMLOCK BUCKLE on one side of the strap is used to Lock the Ladder Strap on one side of your foot whilst a Ratchet Buckle is used on the other side for easy tightening/loosening adjustment. The Ratchet Buckle easily tightens the Ladder into the Heel Straps so that your foot is locked into a comfortable position!. 

TRAMPA Heel Straps are universally fitting and are supplied with a Marine Grade Stainless Steel FITTING KIT as standard, so only take a few minutes to assemble. 

ALL TRAMPA Bindings are assembled using a Marine grade A4 Stainless Steel hardware. The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require.

All TRAMPA bindings use Stainless steel Dome Headed Bolts, connected through the Footstrap into L-Brackets, ensuring no discomfort to the foot. 

The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require 

TRAMPA's huge range of bindings are the most customisable on the market - meaning you’ll be able to get the perfect fit for your riding style - in any colour scheme you can think up.   

VESC 6 MkVI - TRAMPA gives you Maximum power!

READ MORE in the Description Tab above

Introducing the amazing VESC® 6 MKVI Speed Controller, the 6th major product update of the world famous VESC 6 motor controller product line. Packed with a variety of amazing new features, this VESC motor controller is certainly worthy of it’s pimpin’ gold logo.

New features, setting it aprt from the previous MKV edition are: Second UART port, increased current handling, SPI wired IMU, sensor voltage adjustment in software, Spin-To-Sart deactivation option, black anodized housing.

The first VESC controller capable of hibernating, your board can conserve power while not in use - reducing power consumption to just 20μA – less than the self-discharge rate of the batteries. Or with automatic power off, your VESC controller can switch itself off after a set amount of time.

No more loop keys! Compatible with power buttons / switches, the VESC 6 MKVI controller can be ready to go with a single press / flick. If desired, multiple devices can share a single button.

STS (Spin-To-Start) – it’s possible to set your board to power up with a small kick/nudge! This feature can now be enabled or disabled.

 

Features

- Current and voltage measurement on all phases (three phase shunts)
- Adjustable current and voltage filters (full phase filters)
- built in, SPI wired  IMU chip (accelerometer, gyro)
- Spin-To-Start
- Auto power off timer, adjustable - Regenerative braking
- Traction control (single and twin setup)
- Sensored or sensor less operation + hybrid mode
- full torque from zero RPM
- sensor less position control for most salient motors
- Configurable RPM-, current-, voltage- and power limits
- Input source: CAN, PPM, Analog, NRF
- Communication ports: USB, CAN,UAVCAN,  2x UART, SPI, I²C
- Throttle curve and ramping for all input sources
- Separate throttle curves for acceleration and brakes
- Seamless 4-quadrant operation
- Motor revolution, amp hour, watt hour counting
- Display of speed, power, duty cycle, amp flow, estimated range and battery status on App
- Accumulated data from arrays of VESC controllers
- Real time data analysis and read out via communication ports
- Real time data analysis and read out via VESC-Tool APP or VESC-Tool software
- Adjustable protection against:

          -    Low input voltage
          -    High input voltage
          -    High motor current
          -    High input current
          -    High regenerative braking current (separate limits for the motor and the input)
          -    High RPM (separate limits for each direction).
          -    Over temperature (MOSFET and motor)

Technical Data Sheet

- Voltage: 11.1V – 60V (Safe for 3S to 12S LiPo).
- Voltage spikes may not exceed 60V, do not use 13S LiIon!
- Current: Continuous 80A, peak 120A.  Values depend on the temperature and air circulation around the device!
- 5V 1A output for external electronics
- 3.3V 0,5A output for external electronics
- Modes: DC, BLDC, FOC (sinusoidal)
- Supported sensors: ABI, HALL, AS5047 and other encoders

* Android is a trademark of Google LLC.
Google and Play Store are trademarks of Google LLC.
PIXHAWK is a trademark of Lorenz Meier

66T OBD Motor Mount & 33 / 37 tooth Pulley - TWIN

This simple motor mounting kit is as versatile as they come - able to work with most Mountainboard Trucks and wheels - as well as a huge variety of motor & pulley sizes.

Essentially, this kit is the barebones of your motor system - giving you the freedom to pick, choose, and customise what your final product will be!

The Motor Mount Connectors snuggly slide over the truck hanger and are secured tightly with MARINE GRADE M6x10 grub screws. The Premium Quality Carbon Mounting Panel is secured to the Motor Mount Connector. Compatible with Electric Motors with long or short Motor Axles - you’ll be able to fit any electric motor you wish.


 

Its your choice of Deck!! Taller riders, or riders with a long legs or riders who enjoy a wide stance, these riders should look to take take the 9/73 Deck fitted with WINGS. All other riders should take the 9/69 Deck fitted with Wings.

There are different flex Ply's in each both deck sizes to match the riders weight.

READ MORE...

Complete Deck Weight

Based on 16ply 14 ply 15 ply 16 ply 17 ply 18 ply
Blank Deck Weight 3,110g 3,220g 3,330g 3,440g 3,550g
Component Weight 6,847g 6,847g 6,847g 6,847g 6,847g
Complete Deck Weight 10.0 kg 10.1 kg 10.2 kg 10.3 kg 10.4 kg

Component Weights

66T OBD Motor Mount & 33 / 37 tooth Pulley - TWIN912g
Custom TRAMPA Motor with BASIC Filters 1,580g
Amazing TRAMPA VESC 6 MkVI - Maximum power!464g
VESC Connect NRF Wireless Dongle - INTERNAL Antenna 4g
Precision CNC ULTIMATE ATB Truck - TITANIUM Axles1,214g
Classic MONSTER Box fits 2x VESC 6 internally 1,132g
TRAMPA STICKIES Longboard WHEELS 83 or 90mm x set of 4908g
TRAMPA R6-2RS STREET CARVE Bearings for 9.525mm Axles80g
Custom Binding option - Use Heel Straps for control!553g
Total component weight6,847g
Precision CNC ULTIMATE ATB TRUCK with CNC Motor Mount fixing points & TRAMPA Baseplate, TITANIUM Axles & Kingpin
CUSTOM BINDINGS - Build your own Bindings & colour combo!
TRAMPA STICKIES Longboard WHEELS 83 or 90mm x set of 4
2wd Electric Mountainboard Deck

Blank deck weight chart

Based on 16ply 14 ply 15 ply 16 ply 17 ply 18 ply
Blank Deck Weight 3,110g 3,220g 3,330g 3,440g 3,550g
General Flex Rating flexi firm stiff very stiff
----------------------------------------------------

A Board like this is best ridden off road, away from traffic enjoying the countryside, exploring dirty routes you have seen when driving & have only ever dreamed of riding before.... Please ride away from Traffic & not towards it....

----------------------------------------------------

LOADED Deck means EVERYTHING included! (6376 Motors & Motor Protection FILTERS,  Heel Straps, BULL-BARS, LUXURY & MUK-OFF Battery Box Covers, relevant FAST-CHARGER to match the Battery style you choose, is sent fully assembled & tested by the team, then packed in a MUCK-OFF Bag & Stowed in a padded LUXURY TRAVEL Bag).

CUSTOM - You get the minimum board sent in component form without Assembly & NON of the above is supplied as standard, however everything you require can be selected & will cost no more than a loaded board if you do so!

BATTERIES are NOT INCLUDED in the sale of any of the Boards.
For links to Batteries & Options Go here
9-69 Deck Fits Classic Monster Box (upto 22Ah)
9-73 BigBoi Deck - Fits Classic & Massive Monster Box (upto 35Ah)
The 9-73 is 4cm longer than the 9-69. If you are taller than 176cm (5’9”) or have a wide riding stance then we recommend you take the 9/73.

----------------------------------------------------
 
BATTERIES ARE NOT INCLUDED in the sale of the products that TRAMPA sells. Batteries are expensive to purchase & can be deemed as dangerous by the shipping companies meaning they can be difficult to ship, especially internationally. 
We realised the battery shipping issue & decided to incorporate the problem into our product design, therefore now offering different  solutions. Although its a bit of a pain in the ass to have to purchase the cells separately, its far easier & less expensive on the shipping side of things & lets face it there are lots of companies specialising in the distribution of the cells all around the world all selling them much cheaper than what we could supply them to you, so in an attempt to side step the shipping problems & save you some cash for you to purchase them yourself locally.
Batteries are in huge demand as there has been huge growth in all electrical products on the market, specially in the DIY side of things which is kind of where the TRAMPA BOARD position's itself in the market... So in our design we offer alternative solutions to be able to power your board using Li-Po of Li-Ion cells... 
There are links to the batteries that fit all the different boxes here & depending on how far you wish to go on a single charge will determine what cells you should fit.
As a guide & roughly speaking, 1000mAh (1Ah) is roughly the equivalent to 1 mile of average riding. This claim is very factor dependent & there are many factors determining the outcome such as wheel size, tyre pressure, road surface, weight of rider, rate of acceleration, top speed, cruise speed, the gradients the boards are being ridden on & of course the gearing selection of the rider.... Light weight riders will go further...
The Bigger the battery, the further you will go. We offer sized battery boxes. The Classic Monster Box is able to fit up to 22A Li-Po cells, the same box can fit TRAMPA's 21A Li-Ion Cell Pack. Classic MONSTER Boxes can be fitted to any size Mountainboard Deck, but if you want the furthest range, up to 35 MILES, then you need to fit the MASSIVE MONSTER Box. The Massive box is capable of fitting a 21700 12s7p cell pack & using the best 21700 cells out there is capable of 35Ah of range.

----------------------------------------------------

WARNING!!!
Mountainboarding, Longboarding, Electric Mountainboarding, Kiteboarding, Skateboarding, infact any version of boarding of any kind, is obviously dangerous. Accidents are deemed as 'Part of the fun' & are most likely inevitable.
To limit injury in the event of an accident, it is advised that you should wear as much protective clothing as you can bare to wear in an attempt to protect yourself from injury.
When miss-used, all kinds of bizarre & exceptional accidents  could & do happen, any of which could easily result in death. So always take care & never takes risks if you are not prepared to bare the consequences. You, the rider, is & are 100% fully responsible for your actions & or any accidents that may occur from riding any TRAMPA BOARD.

----------------------------------------------------

We advise that you never ride on the roads & most importantly, if you do ride on roads that you always ride well away from any traffic. Hitting a car, bus or Lorry whilst riding a skateboard will most likely result in death so we advise you don't do it. Anyway in most countries around the world it is still illegal to ride the devices we sell on the roads or highways & it has been herd of that crime busting Police from all around the world, do in fact have the power to even confiscate your device, so always be respectful when negotiating with the authorities over legislation of whats right or wrong & your right to ride the roads.... Here in the Uk we have no rights to ride on the roads so let that be a warning.

If there is no cycle path for you to ride then please choose to ride the sidewalk or pavement instead of the road & then take your time & steer well clear of anything that's moving... Give way to all pedestrians, most of them have ear phones in & do not hear you coming so go steady and don't startle by whizzing past them closely & in particular when riding off road look out for, give priority too & give plenty of space to pass dog walkers as they often have an excited animal pleased to see you at the end of a tether, which of course can easily get tangled with you & your equipment & well, lets face it we don't want to hurt the doggie, upset the waker or hurt the rider & where always possible stay well away from all/any moving traffic. Always expect the worst scenario to happen in all cases as vehicle drivers will always win on who comes off best after a collision if competing to be in the same space at the same time, so we beg you to please never take a risk, its just not worth it.

----------------------------------------------------

Always ride with as much impact protect equipment as you can possibly bare to wear, accidents are inevitable & you are 100% responsible for your own safety at all time, so please check your board often for anything broken or loose & take care as you proceed on the board as these things are very powerful, dangerous in the wrong hands....!!!

----------------------------------------------------

This Electric TRAMPA Deck is constructed using the following components & parts...

1x TRAMPA ELECTRIC Mountainboard Deck with WINGS & Trims
1x TWIN 66T OPEN BELT DRIVE Motor Mount with 33 or 37 Tooth Pulley Kit fitted
2x Custom TRAMPA Out-runner motors - Crazy Powerful!
2x CUSTOM VESC 6 SPEED Controllers with NRF Connection
2x Precision CNC TITANIUM AXLE ATB Trucks with Springs/Dampa's or Barrels
1x CUSTOM Monster Box with or without Cell Packs & Cells - MASSIVE Range!
1x TRAMPA own 83 or 90mm STICKIES Premium Longboard Wheels
1x TRAMPA ABEC 7 or CERAMIC R6-2RS 9.525mm Longboard Bearings
1x Build your own Custom TRAMPA Bindings - Add Heel Straps for control!
1x Colour coordinating complete deck TRAMPA VINYL Sticker kit
----------------------------------------------------------------------------
13 / 66 Tooth Pulleys = Best combination for Hill Climbing
14 / 66 Tooth Pulleys = Best All Round Performance
15 / 66 Tooth Pulleys = Will achieve the Highest Top Speed!
------------------------------------------------------------------------------------

Adding 2x 9 inch wheels at the rear of your board will increase grip considerably in soft conditions & give you an increase on top speed of around 3mph!!


DECK OPTIONS
Too gain maximum range you need to fit the MASSIVE Monster Box, but to fit the Massive Box you must purchase the Big-Boi Deck to have enough space to fit it.

Please select - Which Size DECK you require...?
Please select - Which Size DECK you require...?

9-69 2WD E-MTB WING Deck
9-69 2WD E-MTB WING Deck

9-73 2WD E-MTB WING Deck - BIG-BOI (+£20)
9-73 2WD E-MTB WING Deck - BIG-BOI (+£20)

Do you want to add a 21700 Cell Pack with integrated BMS? ?
Do you want to add a 21700 Cell Pack with integrated BMS? ?

Please Supply a Cable Kit to install 2x Li-Po Cells - Cells Not included(+£2)
Please Supply a Cable Kit to install 2x Li-Po Cells - Cells Not included(+£2)

Please supply a 21700 CELL PACK - Cells Not included(+£375) - OUT OF STOCK
Please supply a 21700 CELL PACK - Cells Not included(+£375) - OUT OF STOCK

No Cell Pack Thanks

Quantity required:
We have enough parts to make…  
From £1,155 - each

Excluding VAT
HCC: 9506911000

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon