This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

TRAMPA Mountainboard with 12mm HOLLOW Axle VERTIGO Trucks RATCHET Bindings & Custom Wheels

TRAMPA Mountainboard with 12mm HOLLOW Axle VERTIGO Trucks RATCHET Bindings & Custom Wheels TRAMPA 35° Un-Breakable Mountainboard Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Hex Head Bolt kit CNC Precision VERTIGO ATB Mountainboard TRUCK - 16.5 Inch Wide with 12mm Hollow Steel Axles Used when fixing Motor Mounts CNC Precision VERTIGO ATB Mountainboard TRUCK - 16.5 Inch Wide with 12mm Hollow Steel Axles Used when fixing Motor Mounts CNC Precision VERTIGO ATB Mountainboard TRUCK - 16.5 Inch Wide with 12mm Hollow Steel Axles Used when fixing Motor Mounts CNC Precision VERTIGO ATB Mountainboard TRUCK - 16.5 Inch Wide with 12mm Hollow Steel Axles Used when fixing Motor Mounts CNC Precision VERTIGO ATB Mountainboard TRUCK - 16.5 Inch Wide with 12mm Hollow Steel Axles Used when fixing Motor Mounts CNC Precision VERTIGO ATB Mountainboard TRUCK - 16.5 Inch Wide with 12mm Hollow Steel Axles Used when fixing Motor Mounts CNC Precision VERTIGO ATB Mountainboard TRUCK - 16.5 Inch Wide with 12mm Hollow Steel Axles Used when fixing Motor Mounts CNC Precision VERTIGO ATB Mountainboard TRUCK - 16.5 Inch Wide with 12mm Hollow Steel Axles Used when fixing Motor Mounts CNC Precision VERTIGO ATB Mountainboard TRUCK - 16.5 Inch Wide with 12mm Hollow Steel Axles Used when fixing Motor Mounts CNC Precision VERTIGO ATB Mountainboard TRUCK - 16.5 Inch Wide with 12mm Hollow Steel Axles Used when fixing Motor Mounts CNC Precision VERTIGO ATB Mountainboard TRUCK - 16.5 Inch Wide with 12mm Hollow Steel Axles Used when fixing Motor Mounts CNC Precision VERTIGO ATB Mountainboard TRUCK - 16.5 Inch Wide with 12mm Hollow Steel Axles Used when fixing Motor Mounts CNC Precision VERTIGO ATB Mountainboard TRUCK - 16.5 Inch Wide with 12mm Hollow Steel Axles Used when fixing Motor Mounts Build your own Custom TRAMPA Wheel to fit to 12mm Axles - HYPA, SUPERSTAR, 8 Inch MEGASTAR, 9 Inch PRIMO or 9 INCH DEEP DISH MEGASTAR Wheels! Awesome selection from 5 Inch to 9 Inch, on & off road! Amazing!! 12mm Axle ABEC 7 Rated Mountainboard Bearings for HYPA or SUPERSTAR Wheels CUSTOM BINDINGS - Build your own Bindings & colour combo!
RRP
£530+
schematic

flexometer

35º Mountainboards will fit to Spring Trucks

TRAMPA Mountainboard decks are Un-Breakable. In over 20 years nobody has ever broken one. They are available as 9/69 or 9/73. 9 is the deck width measured in inches, 69 or 73 is the foot stance area measured in Centimeters. The 9/73 suits longer legged riders. Both decks can be fitted with WINGS to increase the deck width from 9 to 10 inches, to give safe routing for cables from the box in the mddle of the deck under the foot to the motors or controllers at the rear of the deck & to give a comfortable W Shaped Concave feel to the rider under the foot....

CNC Precision VERTIGO ATB Mountainboard TRUCK - 16.5 Inch Wide with 12mm Hollow Steel Axles Used when fixing Motor Mounts

VERTIGO TRUCKS are the perfect option for all ADULT SIZED ADVANCING RIDERS.

The TRAMPA VERTIGO TRUCK is a slimmed down lightweight version of the standard Infinity Truck! Using FORGED Alloy for the body of the HANGER it is then CNC precision machine cut, stripping out the bulk of the material, saving loads of weight, but without altering much of its critical strength.

To save more weight, the VERTIGO hanger is fitted with premium quality, 12mm HOLLOW Steel axles. To retain strength the Hollow axles are made from premium quality, HEAT TREATED (HARDENED) STEEL & are glued into position.

The Hanger is attached to an Aerospace grade HEAT TREATEDAnodised ALUMINUM BASEPLATE which in turn is CNC machined, cutting out the bulk of its material, reducing weight as much as possible without altering its critical strength & leaving a Pimp two tone top quality appearance behind!

The Hanger & Baseplate "Kingpin Holes" are also CNC'd. This ensures that the Truck assembless & performs like a dream. NYLON BUSHINGS are inserted into the Kingpin Hole's guaranteeing a tight connection between the moving parts & eliminating wear between them. We use a Heat Treated 8mm Steel Kingpin (which seriously reduces weight over the competition’s products), to connect the 2 integral parts together.

Everything fixes together perfectly enabling the VERTIGO TRUCKS to provide problem free precision riding! Save money with this purchase & even more weight by upgrading the Kingpin to TITANIUM. Titanium is half the weight & twice the strength of Steel!

SPRINGS, loaded with TRAMPA DAMPA's, are squeezed into the fixing positions between the Hanger & Baseplate. When locked into position they give resistance to the steering, that can be pre-set to your weight, riding ability & personal preference. The TRAMPA DAMPA's within the springs come in 5 different hardnesses to suit all riding styles. The Springs can be adjusted on the fly! Using a 4mm Allen Key you can further TUNE your steering by turning the SPRING ADJUSTER clockwise to give TIGHTER STEERING (fast riding) or turning anti-clockwise to give LOOSE STEERING (Carvie riding). You can quickly adjust your board relevant to the conditions or terrain ahead. As your riding will improve over time you will demand more pre-tension from your steering, so don't over tighten your springs, instead change your DAMPA's to something a little harder. The rider can fit different Dampas in different corners of the deck to custom the steering of their board exactly the way they need it.

The reinforced plastic injected spring retainer houses a specially made, Marine grade, stainless steel flanged washer. This custom piece eliminates the need for a Penny washer, (which is so commonly used in other brands to support the retainer, and is a complete pain in the XXX to fit) and consequently gives the rider easy access for servicing and fitting the springs into the trucks. The Spring Adjuster has also been custom-made from Marine Grade Stainless steel. The overall length has be shortened so not to poke through the spring retainer and interfere with the Dampa. Also the neck of the adjuster (the area which sits within the retainer) has been narrowed so that it fits within the thread of the retainer effectively giving the rider 4 spare retainers should they ever need them in the future. 

Build your own Custom TRAMPA Wheel to fit to 12mm Axles - HYPA, SUPERSTAR, 8 Inch MEGASTAR, 9 Inch PRIMO or 9 INCH DEEP DISH MEGASTAR Wheels! Awesome selection from 5 Inch to 9 Inch, on & off road! Amazing!!

The 6 Spoke HYPA Wheel is the lightest & strongest plastic injected Hub / Wheel on the market today! Its produced using original DuPont ingredients & the best Injection Moulding machinery, no quality expense is spared during the production of this amazingly strong little hub!

During testing the HYPA Wheels performance surpassed all expectations. :-) This little 8 inch wheel proved to be so strong, when the "Crash Test Dummies" (i mean the Mountainboard Team Riders) inflated their tyres well beyond factory recommendations! (Tut-Tut Naughty-Naughty!) The extra inflation resulted in substantially faster roll speeds, giving them the extra time in the air to complete their huge freestyle moves & still have time land in 1 piece! I'm pleased to tell you there were no explosions from the over inflation to report whilst breaking a HYPA HUB is just about unheard of, something extraordinary has to go wrong before these hubs do! If you have seen some of the crazy stuff the MTB & KTB teams have put the equipment through over the years, with genuinely almost no problems to report, you will have no doubt of the HYPA WHEELS performance capabilities.

HYPA Hubs are available in loads of coordinating colour combinations its difficult to make the decision as to which option you like the most! You can choose from naked Matt Black or White to Painted Gloss Red or Gloss Blue with Painted Black or White TRAMPA Logo's or Printed in Winter or Army Camo, the choice is all yours... :-)

TRAMPA's HYPA hubs are held together using Marine Grade (A4) Stainless steel Nuts & Bolts & will never rust on you. Our bolts are perfect for bad conditions. Not only will the nuts & Bolts never rust on you all the Bolts used by TRAMPA have been dipped in a special Blue Locking Paste, whilst all the Nuts that TRAMPA uses are fitted with the world renowned Nyloc nylon nut locking system, all of these no expense spared small details ensure you get the absolute best product possible! To help prevent you from purchasing imitations, TRAMPA's HYPA Hubs are always TRAMPA embossed between the spokes proving our top quality! 

Your tyre requirements will be defined by the surface you are riding on, however you will be pleased to read that all of the HYPA Hubs will fit into any of the 7 inch Tyres or 8 Inch Tyres on the TRAMPA website. TRAMPA Hubs are also compatible with all known 8 Inch Tyres that are currently on the market, including any other Mountainboard or Dirt Scooter brand.

TRAMPA’s very own & genuine ABEC 5 rated Bearings, push perfectly into the 'Centre Set' bearing housings either side of the hub. The bearings are supported internally by use of a 'Bearing Support Spacer' sitting on the axle in the middle of the hub, guaranteeing the position of the bearings & the smoothest spin rate possible. TRAMPA's Bearings will fit onto 9.525mm, 10mm & 12mm Axles. The metric measurement of 9.525mm, is equal to the US Imperial measurement 3/8ths of 1 inch. Bearing Reducer Sleeves downsize your 12mm Bearings to fit onto 10mm Metric Scooter Axles or 9.525mm (3/8ths of an inch) Imperial Skate Axles. Bearings can be supplied at 50% of the usual retail price when purchased with a wheel... 2x Bearings cost just £2.50 per pair (usually £2.50 each), resulting in a £10 saving per set of 8x bearings, 8 bearings are enough for a set of 4 wheels!

TRAMPA's 200mm x 50mm - 8 Inch wonder wheels are the primary choice sized wheel for many inventors developing sporting equipment requiring very strong whilst very light weight, small pneumatic wheels for their applications to work correctly. Mountainboards, Kiteboards, 2Wheel, Dirt-Scooters, Bikes Skates, Sledges, Trikes, Skikes, Model Planes, Single Seater Planes, Dog Sledding, Dirt Skiing, Transportation Chariots & now lots of exciting electronic applications all due to come to the market very soon, all require an 8 inch wheel for their best movement... If you have a wheeled project on the go & you would like to fit TRAMPA's 8 inch wheels onto it, then in your design you need to use a 12mm axle & you will need to give an axle mounting space of 34.2mm in order to fit the TRAMPA Hubs correctly.

CUSTOM BINDINGS - Build your own Bindings & colour combo!

RATCHET BINDINGS are the Mountain Board rider’s primary choice of binding! The Ratchet Buckle mechanism allows you to easily position the binding to fit most adult sized shoes or boots. There is a release clip on the top of the Ratchet Buckle which works just the same as snowboard binding does, that release the pressure & allows you to step out...

The main Foot-Strap has a special 'Lug or locator' on the top of the Foot-Strap to house a special Hook that protrudes from the underside of Ratchet Buckle. This hook presses into the 'Lug' on the top of the Foot-strap preventing any sideways movement in the connection of the Strap & Ratchet Buckle

The Ratchet Buckle connects with a special M5 Star nut & M5x8mm Countersunk bolt & the Ratchet is mounted on the top of the Main Foot Strap. The LADDER STRAP Positions on the outside of the foot & feeds into the Ratchet Buckle. Levering the Ratchet buckle brings the two straps together. The Ratchet Buckle locks each time you lift the buckle tightening the two straps together until you have a snug but not tight connection over the top of your foot. The release clip can be tuff to move specially of your bindings have been ratcheted tight.

Ratchet Bindings work at their absolute optimum when combined with TRAMPA Heel StrapsHEEL STRAPS Completely lock your feet into any of the TRAMPA bindings to make you feel at one with the deck. When using Heel Straps you are 100% committed to the ride & by doing so you gain so much more control over the board.  

With 3 pairs of different length Ladder Straps to choose from, the TRAMPA Heel Straps easily adjust to fit to any sized shoe that comfortably fits onto a Mountain Board . A CAMLOCK BUCKLE on one side of the strap is used to Lock the Ladder Strap on one side of your foot whilst a Ratchet Buckle is used on the other side for easy tightening/loosening adjustment. The Ratchet Buckle easily tightens the Ladder into the Heel Straps so that your foot is locked into a comfortable position!. 

TRAMPA Heel Straps are universally fitting and are supplied with a Marine Grade Stainless Steel FITTING KIT as standard, so only take a few minutes to assemble. 

ALL TRAMPA Bindings are assembled using a Marine grade A4 Stainless Steel hardware. The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require.

All TRAMPA bindings use Stainless steel Dome Headed Bolts, connected through the Footstrap into L-Brackets, ensuring no discomfort to the foot. 

The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require 

TRAMPA's huge range of bindings are the most customisable on the market - meaning you’ll be able to get the perfect fit for your riding style - in any colour scheme you can think up.   

TRAMPA Mountainboard decks are Un-Breakable. In over 20 years nobody has ever broken one. They are available as 9/69 or 9/73. 9 is the deck width measured in inches, 69 or 73 is the foot stance area measured in Centimeters. The 9/73 suits longer legged riders. Both decks can be fitted with WINGS to increase the deck width from 9 to

READ MORE...

Complete Deck Weight

Weight Based on 35° 9/69 Deck 14 ply 15 ply 16 ply 17 ply 18 ply
Blank Deck Weight 2,652g 2,852g 3,052g 3,252g 3,452g
Component Weight 3,953g 3,953g 3,953g 3,953g 3,953g
Complete Deck Weight 6.6 kg 6.8 kg 7.0 kg 7.2 kg 7.4 kg

Component Weights

CNC Precision VERTIGO ATB TRUCK - 16.5 Inch & Hollow Axles1,324g
Any Custom combination of Hub or Tyre that fits to 12mm Axles1,892g
Custom Binding option - Use Heel Straps for control!553g
ABEC 7 12x28x8mm Mountainboard Bearings 184g
Total component weight3,953g
CNC Precision VERTIGO ATB Mountainboard TRUCK - 16.5 Inch Wide with 12mm Hollow Steel Axles Used when fixing Motor Mounts
CUSTOM BINDINGS - Build your own Bindings & colour combo!
Build your own Custom TRAMPA Wheel to fit to 12mm Axles - HYPA, SUPERSTAR, 8 Inch MEGASTAR, 9 Inch PRIMO or 9 INCH DEEP DISH MEGASTAR Wheels! Awesome selection from 5 Inch to 9 Inch, on & off road! Amazing!!
TRAMPA 35° Un-Breakable Mountainboard Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Hex Head Bolt kit

Blank deck weight chart

Weight Based on 35° 9/69 Deck 14 ply 15 ply 16 ply 17 ply 18 ply
Blank Deck Weight 2,652g 2,852g 3,052g 3,252g 3,452g
General Flex Rating flexi firm stiff very stiff
This TRAMPA Mountainboard is made of the following components :-)
1x Custom 35° Mountainboard Deck - Drilled, Gripped with Stainless Bolts etc
2x CNC Precision VERTIGO ATB TRUCK - 16.5 Inch & Hollow Axles
4x Any Custom combination of Hub or Tyre that fits to 12mm Axles
1x Custom Binding option - Use Heel Straps for control!
1x ABEC 7 12x28x8mm Mountainboard Bearings


DECK OPTIONS

Please select what Shape Deck you would like
Please select what Shape Deck you would like

9/69 Mountainboard Deck
9/69 Mountainboard Deck

9/69 Mountainboard Deck with WINGS (+£40)
9/69 Mountainboard Deck with WINGS (+£40)

9/69 E-MTB Deck with WINGS - 2WD (+£55)
9/69 E-MTB Deck with WINGS - 2WD (+£55)

9/69 E-MTB Deck with WINGS - 4WD (+£70)
9/69 E-MTB Deck with WINGS - 4WD (+£70)

9/73 BigBoi Mountainboard Deck
9/73 BigBoi Mountainboard Deck

9/73 BigBoi MTB Deck with WINGS (+£40)
9/73 BigBoi MTB Deck with WINGS (+£40)

9/73 BigBoi E-MTB with WINGS - 2WD (+£55)
9/73 BigBoi E-MTB with WINGS - 2WD (+£55)

9/73 BigBoi EMTB with WINGS - 4WD (+£70)
9/73 BigBoi EMTB with WINGS - 4WD (+£70)

Quantity required:
We have enough parts to make…  
RRP £530 - per deck

Excluding VAT
HCC: 9503001000

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Some Old Skool Vid of the TRAMPA Team on Tour around Europe back in 2009....

Special Thanks to Ryan Slater

And James Sleigh for letting us stay in Corcheval

Riders Sam Nicholas for always being a TRAMPA Legend

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon