This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

TRAMPA's ORRSOM Longboard 985mm tip to tip Concave with Multi Ride Height 3 Decks in 1!

TRAMPA's ORRSOM Longboard 985mm tip to tip Concave with Multi Ride Height 3 Decks in 1! 14ply ORRSOM Longboard - Concave & Multi mountable having 3 Ride height positions, ORRSOM!! CNC charge for work on Orrsom Battery Tray Complete deck Drillage edging and sanding M4 8x8mm Nikel plated Flush fitting Threaded Insert Nut is Screwed into the ORRSOM longboard deck & used for fixing the Underboard Battery Tray to the Deck 1x 9 Inch squares of Top Quality Jessup Grip tape 12-FIFTIES Longboard Truck Bolt kit M5 x 20mm Hex Bolt Cable Router for ORRSOM Longboard 580mm - Hand made TRAMPA Vinyl Sticker
RRP
£200+
schematic

flexometer

TRAMPA's ORRSOM Longboard deck!

Specifically designed to fit with the ORRSOM BOARD UNDER-DECK BATTERY TRAY & to DOCK perfectly with TRAMPA's range of extra wide Longboard Trucks, the 12Fifties - WIDE (fitted with 9.525mm Axles) or the sightly wider bigger brother 14Fifties Longboard trucks - EXTRA WIDE (Fitted with 12mm axles) of which both Longboard Truck options assemble harmoniously to the deck to give the user 3 different ride heights to match the 3 different wheel sizes that can fit to this Deck!! To make one board to be able to fit 3 different wheel sizes is ORRSOM!!

•Available in 3 flex ratings,
   14ply - FLEXI, 
   15ply - FIRM
   16ply - STIFF to suit all rider sizes/rider styles

•supplied smothered from tip to tip in hard waring JESSOP Grip tape & of course a TRAMPA Deck would not be a TRAMPA deck if is was not supplied with a Marine Grade Stainless Steel Bolt Kit to connect the trucks with! ORRSOM!!

Measuring 985mm tip to tip & 230mm at its widest point the ORRSOM deck is trimmed with 5º of negative camber around the edges. Complete description CAT

 

 

Cable Router for ORRSOM Longboard

The ORRSOM Longboard Cable Router sits between the rear truck & battery tray, neatly routing the cables from the VESCs to the Motors while protecting them from knocks and snags commonly experience with under-mounted electronics. 

1x 9 Inch squares of Top Quality Jessup Grip tape

Mega Grippy & really easy to apply. Ensure the decks surface is clean & dry before application. Easy to custom shape, simply draw your shape on the back & cut out with Scissors or sharp knife. Remember to use a ruler for clean edges. Watch your fingers when slicing, please ask an adult to make this work if you are under 16 & please remember, when you draw on the back of the grip tape remember its a mirror image so do everything in switch! Use a template for best results... :-)

M5 x 20mm Regular Hex Head Bolt - Marine Grade Stainless steel with locking paste

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M5 Nut - Marine Grade Stainless steel Nylock Nut - Fixes to Trucks & Bindings

Introducing TRAMPA's M5 (5mm Thread) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M5 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M5 Bolts that hold the TRUCKS to the DECK for all  Decks & also for the Dome Head Bolts connecting the L BRACKETS to the BindingsUse an 8mm spanner or Ratchet Drive to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

M4 8x8mm Nikel plated Flush fitting Threaded Insert Nut is Screwed into the ORRSOM longboard deck & used for fixing the Underboard Battery Tray to the Deck

This M4 8m x 8mm RAMPA Muffen or Insert nut will allow you to secure M4 Bolts to your deck without the need of using often unsightly or protruding nut on the other side leaving a neat clean smooth finish to your assembly....

We use these M4 RAMPA Nuts to secure the UNDERBOARD Battery Tray to the underside of all of the Electric ORRSOM Boards...

To make the hole to accept the fitting the nut, you will need to measure accurately so first make a pilot hole using a 2/3mm drill bit. Then specifically using a 5mm Steel drill bit, carefully drill the larger sized hole remembering to drill at 90º to the surface. If you do not Drill 90º to the surface your RAMPA Nuts will not fit flush...

Once you have made the 5mm holes, use a 4mm Allen Key to screw the RAMPA nut into the deck. Be careful when screwing in, you need to add a little bit of force to make it bite into the surrounding material, but not too much force as you do not wish to push through anything.... Turning the M4 Allen Key may be tough as when screwing the nut into the deck as it will literally cutting a thread into the surrounding material of the deck as you do...  It may help secure the RAMPA nuts even better if you add a tiny squirt of Glue as you tighten up the last few turns...

580mm - Hand made TRAMPA Vinyl Sticker

.

Recommended decks

Rider's weight Suggested deck Deck Weight Flex
51 - 76 kg
(8 - 12 stone)
14 ply 2,639g flexi
64 - 89 kg
(10 - 14 stone)
15 ply 2,789g firm
76 - 127 kg
(12 - 20 stone)
16 ply 2,899g stiff
DECK WEIGHTS INCLUDE ALL HARDWARE & DECK ACCESSORIES

TRAMPA's ORRSOM Longboard deck!

Specifically designed to fit with the ORRSOM BOARD UNDER-DECK BATTERY TRAY & to DOCK perfectly with TRAMPA's range of extra wide Longboard Trucks, the 12Fifties - WIDE (fitted with 9.525mm Axles) or the sightly wider bigger brother 14Fifties Longboard trucks - EXTRA WIDE (Fitted with 12mm axles) of which both Longboard Truck options assemble harmoniously to the deck to give the user 3 different ride heights to match the 3 different wheel sizes that can fit to this Deck!! To make one board to be able to fit 3 different wheel sizes is ORRSOM!!

•Available in 3 flex ratings,
   14ply - FLEXI, 
   15ply - FIRM
   16ply - STIFF to suit all rider sizes/rider styles

•supplied smothered from tip to tip in hard waring JESSOP Grip tape & of course a TRAMPA Deck would not be a TRAMPA deck if is was not supplied with a Marine Grade Stainless Steel Bolt Kit to connect the trucks with! ORRSOM!!

Measuring 985mm tip to tip & 230mm at its widest point the ORRSOM deck is trimmed with 5º of negative camber around the edges. Complete Techincal CAT

1x 14ply ORRSOM Longboard Deck
1x CNC charge for work on Orrsom Battery Tray
1x Complete deck Drillage, Edging Filing & Sanding
18x M8x8mm Insets for securing Battery Tray to Deck
4x lengths of grip Tape to cover the board
8x M5 x 20mm HEX Head Bolt - Marine Grade Stainless steel
8x M5 Nut - Marine Grade Stainless steel Nylock Nut
8x M5 Washer Form B - Marine Grade Stainless Steel
1x Orrsom Board Cable router
1x 580mm - Hand made TRAMPA Vinyl Sticker
What Ply ORRSOM Longboard deck do you require...?
What Ply ORRSOM Longboard deck do you require...?

14ply ORRSOM Longboard - FIRM
14ply ORRSOM Longboard - FIRM

15ply ORRSOM Longboard - STIFF
15ply ORRSOM Longboard - STIFF

16ply ORRSOM Longboard - STIFFEST - OUT OF STOCK
16ply ORRSOM Longboard - STIFFEST   - OUT OF STOCK

A bolt kit is included, please select which length you require
A bolt kit is included, please select which length you require

M5 x 20mm 12-Fifties Truck Bolt kit - 14ply(+£3)
M5 x 20mm 12-Fifties Truck Bolt kit - 14ply(+£3)

M5 x 25mm 12-Fifties Truck Bolt kit - 15 & 16ply (+£3)
M5 x 25mm 12-Fifties Truck Bolt kit - 15 & 16ply (+£3)

No Truck Mounting Bolt Kit required Thanks

Quantity required:
We have enough parts to make…  
RRP £200 - per deck

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon