£0 
This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.
TRAMPA BARRELS Complete 1x TRUCK Kit - CUSTOM
-
2x M5 x 16mm TORX Countersunk Bolt - Marine Grade Stainless steel with Fitting -
2x M5 x 30mm HEX Head Bolt - Fixes Trucks to decks - Marine Grade Stainless steel with locking paste -
2x M5 Washer BZP Bright Zinc Plated Form G 1.6mm thick -
4x BARRELS Retainer 4mm BASE - CUSTOM COLOUR -
2x TRAMPA BARRELS - 62mm Rubber Tubes replace Springs for lovely performance
M5 x 16mm TORX Countersunk Bolt - Marine Grade Stainless steel with Fitting
TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush.
Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!
Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.
M5 x 30mm HEX Head Bolt - Fixes Trucks to decks - Marine Grade Stainless steel with locking paste
Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!
Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.
BARRELS Retainer 4mm BASE - CUSTOM COLOUR
Used to hold the Barrels in place within any SPRING TRUCK.
Simple to install - the plug-ends are inserted into the barrels, then bolts are secured through the trucks, into the threaded-inside of the retainer.
Secures to the baseplate using an M5x25 Shanked Hex Bolt, & secures to hangers using M5x16 Countersunk Bolts.
2x Retainers required PER BARREL
4x Retainers required PER TRUCK
4mm BASE
Retainers are available with different base-thinknesses - 4mm, 5mm, 6mm & 7mm.
A greater base-thickness preloads more tension onto the barrels, stiffening up the steering for better high-speed stability, whereas a lower base-thickness would be much better suited for carving.
RETAINERS SOLD INDIVIDUALLY
TRAMPA BARRELS - 62mm Rubber Tubes replace Springs for lovely performance
TRAMPA BARRELS offer a new riding experience, when compared to riding with the traditional SPRING & DAMPA set ups.
With no push-back, or ‘rebound’ that is expected with springs, the barrel’s design cushions cornering to create a smoother ride.
Secured to Spring Trucks using 2x Barrel Retainers, available in a variety of colours & base thicknesses
2x Barrels required Per Truck
Introducing the new TRAMPA BARREL’s, A simple & hugely effective rubber Tube that is fitted into position using precision made T6 Aluminum BARREL RETAINERS that are slotted into the hole in the Barrel allowing it too lock into position where the springs would usually sit.
The TRAMPA BARREL’s can be fitted to the 'Inside or Outside' mounting positions of the Truck. They are locked into position from the top with bolts instead of 'Spring Adjusters' & offer no ‘on the fly’ adjustment, but they do provide great stability at high speed & a completely different sensation to riding with Springs...
With no springs pushing back, arguably creating rebound, the hollow Barrel design cushions your cornering, creating a new smooth feel to riding. Being made from RUBBER means they absorb vibrations & undulations easy… in other words, you get no ‘Springy’ bounce back that some some say you get from the traditional springs, especially when fitted on their own...
At 63mm high & a diameter of 32mm the TRAMPA BARREL’s will fit into mounting position on any of the TRAMPA Spring Trucks in the range.
TRAMPA BARRELS can now be further 'pre-Tensioned' by adding the NEW Thicker based BARREL Retainers. Available in 5mm, 6mm & 7mm base thicknesses, adding the thicker base 'Stiffens the steering' making them less easy to carve BUT more suitable for high speed shredding!
2x TRAMPA BARRELS - 62mm Rubber Tubes replace Springs for lovely performance
2x M5 x 30mm HEX Head Bolt - Marine Grade Stainless steel
2x M5 x 16 Countersunk TORX Bolt
2x M5 Washer BZP Bright Zinc Plated Form G 1.6mm thick
Weight: 188g
HCC: 8714929000
Related Products
+44 (0)115 8410006
All images and material on this site not covered by other copyright and not explicitly marked as public domain is © Trampa Boards 2000 - 2024