Home»ALL TERRAIN BOARDS»Mountainboards»on TRAMPA-IR TRUCKS »TRAMPA-IR Mountainboard Deck

35º Mountainboards will fit to Spring Trucks

TRAMPA Mountainboard decks are Un-Breakable. In over 20 years nobody has ever broken one. They are available as 9/69 or 9/73. 9 is the deck width measured in inches, 69 or 73 is the foot stance area measured in Centimeters. The 9/73 suits longer legged riders. Both decks can be fitted with WINGS to increase the deck width from 9 to 10 inches, to give safe routing for cables from the box in the mddle of the deck under the foot to the motors or controllers at the rear of the deck & to give a comfortable W Shaped Concave feel to the rider under the foot....

TRAMPA IR Double Kingpinned Skate Style Trucks

Introducing the new EXTRA-WIDE Double King-Pinned TRAMPA'IR Truck steering system.

Taken from a classic skateboard design & then seriously Beefed-up, TRAMPA''s IR Extra Wide Trucks may visually seem more familiar to someone coming from a skate or Longboard background.

Double bushed steering supported by pretty much any Skate or Longboard style bushing they perform comfortably for all kinds of riders on all types of terrain, wether it be causing nuisance carving up streets through the middle of your home town or ripping through the gnarliest of tight woodland trails these trucks can handle it all.

TRAMPA-IR TRUCKS - Why not??
With a compatible mounting pattern exactly the same as that of any of the TRAMPA TRUCKS, the IR Trucks can be easily Retro-Fitted to your existing deck giving your board yet another brand new look & feel under your feet!

TRAMPA-IR Trucks have a 17 Inch Wheel Base (1'' Inch Wider than our regular ATB Spring Trucks), consequently they feel tremendously stable at speed whilst still offering heaps of steering, regardless of what deck they are fitted too.

The Double kingpin design has been used in many iterations over the years. Using the simple mechanical principle of doubling the steering resistance of that of a regular ATB Skate Truck, to make the ride feel more stable at speed, compared to the original Single Skate or a loose set Spring Truck steering system.

Each bushing is located on a seat, one inside the hanger body (BUSHING IRIS) between the Baseplate & one below, held in by a Skate Washer & 3/8ths Inch Nut. Everything is bolted together using 2x 50mm long skate kingpin which are the shared parts from the ATB Skate Trucks that we offer.

CNC'd from a billet of 6061 T6 Aluminum, they have been High Bead polished for surface protection & High Gloss BLACK Anodised for perfect colour co-ordination with all the other anodised parts.

The TRAMPA-IR hanger body 30mm wider than TRAMPA's original spring truck design & is in total 312 mm wide & is 'Box shaped', providing the ultimate structural strength.

Using CNC as a production method we are able to remove the mass of the material out keeping the weight of the hanger body as low as possible!

The TRAMPA-IR hanger has a 'slung forward' design which lengthens the wheel-base further from the end of the deck. This maximises the foot to wheel clearance whilst lengthening the overall ride allowing greater stability at higher speed, making the most of the new hangar width....

An interesting feature of the hanger geometry is the vertical kingpin position. The CNC box section extends past the bottom bushings kingpins, making it less likely to catch on obstacles below you & extending hangar life!
 

MOTOR MOUNTING & WHEEL OPTIONS  
The TRAMPA'IR Trucks feature the same length 12mm Steel axle & are fitted into the same precision made CNC 19.5 x 19.5mm motor mounting square as the famous PRECISION Made CNC INFINITY & VERTIGO spring trucks have. SO as a consequence any of the TRAMPA Mountainboard Motor Mounts can be fitted just the same way. The same applies to the TRAMPA wheel range, any wheel TRAMPA offers to fit 12mm Axles will fit to the TRAMPA-IR Trucks, that gives you a range of wheel sizes to pick from, from 5-10 Inch through the options TRAMPA offers...

BUSHING SETUP
Since the TRAMPA-IR Trucks feature a standard skate bushing eye, pretty much any & every available Skate or Longboard bushing can be used in combination with the TRAMPA-IR Truck system. The tuning options are therefore endless. However you don't need to go mad & try hundreds of possible combinations. While you can improve the response to your individual needs, the standard setup should already work very well for you.

FITTING THE IRs TO YOUR DECK & MOUNTING PATTERN
Super handy too know they fit to all TRAMPA Mountain board​s so it doesn't matter what kind of a Mountain board you have, you can be sure it will fit. The only decks that can not take the IR Baseplates are the older style Holy Pro decks with the big frog mouth cutout in the nose. Holy pro decks with the smaller cutout in the nose can take the IR baseplate. Those decks typically allow for inside & outside spring position & will there fore be suitable.

The mounting pattern of the Baseplate is 63.5 x 41mm, same as the old skate truck pattern used on all our other tucks so everything can fit where others have already been making them the perfect upgrade Truck. The axles are  in the same position compared to the TRAMPA spring trucks, just the wheel base will be 30mm wider.

BASEPLATE
CNC'd from a from a billet of 6061 T6 Aluminum & comes in 10 different rainbow colours. the TRAMPA-IR Baseplate is designed to hold two standard skate kingpins (9.4 x 50mm).

RAKE
In order to shift the wheels further towards the end of s the deck, giving the board an additional 6mm of wheelbase length, the design is non symmetric in regards to the mounting pattern & depending on how you flip/position the Baseplate, you can either increase or decrease the wheel base of your board by 12mm.

WIDTH
Being 17 inches wide the TRAMPA-IR Trucks have extra stability built in

Build your own Custom TRAMPA Wheel to fit to 12mm Axles - HYPA, SUPERSTAR, 8 Inch MEGASTAR, 9 Inch PRIMO or 9 INCH DEEP DISH MEGASTAR Wheels! Awesome selection from 5 Inch to 9 Inch, on & off road! Amazing!!

The 6 Spoke HYPA Wheel is the lightest & strongest plastic injected Hub / Wheel on the market today! Its produced using original DuPont ingredients & the best Injection Moulding machinery, no quality expense is spared during the production of this amazingly strong little hub!

During testing the HYPA Wheels performance surpassed all expectations. :-) This little 8 inch wheel proved to be so strong, when the "Crash Test Dummies" (i mean the Mountainboard Team Riders) inflated their tyres well beyond factory recommendations! (Tut-Tut Naughty-Naughty!) The extra inflation resulted in substantially faster roll speeds, giving them the extra time in the air to complete their huge freestyle moves & still have time land in 1 piece! I'm pleased to tell you there were no explosions from the over inflation to report whilst breaking a HYPA HUB is just about unheard of, something extraordinary has to go wrong before these hubs do! If you have seen some of the crazy stuff the MTB & KTB teams have put the equipment through over the years, with genuinely almost no problems to report, you will have no doubt of the HYPA WHEELS performance capabilities.

HYPA Hubs are available in loads of coordinating colour combinations its difficult to make the decision as to which option you like the most! You can choose from naked Matt Black or White to Painted Gloss Red or Gloss Blue with Painted Black or White TRAMPA Logo's or Printed in Winter or Army Camo, the choice is all yours... :-)

TRAMPA's HYPA hubs are held together using Marine Grade (A4) Stainless steel Nuts & Bolts & will never rust on you. Our bolts are perfect for bad conditions. Not only will the nuts & Bolts never rust on you all the Bolts used by TRAMPA have been dipped in a special Blue Locking Paste, whilst all the Nuts that TRAMPA uses are fitted with the world renowned Nyloc nylon nut locking system, all of these no expense spared small details ensure you get the absolute best product possible! To help prevent you from purchasing imitations, TRAMPA's HYPA Hubs are always TRAMPA embossed between the spokes proving our top quality! 

Your tyre requirements will be defined by the surface you are riding on, however you will be pleased to read that all of the HYPA Hubs will fit into any of the 7 inch Tyres or 8 Inch Tyres on the TRAMPA website. TRAMPA Hubs are also compatible with all known 8 Inch Tyres that are currently on the market, including any other Mountainboard or Dirt Scooter brand.

TRAMPA’s very own & genuine ABEC 5 rated Bearings, push perfectly into the 'Centre Set' bearing housings either side of the hub. The bearings are supported internally by use of a 'Bearing Support Spacer' sitting on the axle in the middle of the hub, guaranteeing the position of the bearings & the smoothest spin rate possible. TRAMPA's Bearings will fit onto 9.525mm, 10mm & 12mm Axles. The metric measurement of 9.525mm, is equal to the US Imperial measurement 3/8ths of 1 inch. Bearing Reducer Sleeves downsize your 12mm Bearings to fit onto 10mm Metric Scooter Axles or 9.525mm (3/8ths of an inch) Imperial Skate Axles. Bearings can be supplied at 50% of the usual retail price when purchased with a wheel... 2x Bearings cost just £2.50 per pair (usually £2.50 each), resulting in a £10 saving per set of 8x bearings, 8 bearings are enough for a set of 4 wheels!

TRAMPA's 200mm x 50mm - 8 Inch wonder wheels are the primary choice sized wheel for many inventors developing sporting equipment requiring very strong whilst very light weight, small pneumatic wheels for their applications to work correctly. Mountainboards, Kiteboards, 2Wheel, Dirt-Scooters, Bikes Skates, Sledges, Trikes, Skikes, Model Planes, Single Seater Planes, Dog Sledding, Dirt Skiing, Transportation Chariots & now lots of exciting electronic applications all due to come to the market very soon, all require an 8 inch wheel for their best movement... If you have a wheeled project on the go & you would like to fit TRAMPA's 8 inch wheels onto it, then in your design you need to use a 12mm axle & you will need to give an axle mounting space of 34.2mm in order to fit the TRAMPA Hubs correctly.

CUSTOM BINDINGS - Build your own Bindings & colour combo!

RATCHET BINDINGS are the Mountain Board rider’s primary choice of binding! The Ratchet Buckle mechanism allows you to easily position the binding to fit most adult sized shoes or boots. There is a release clip on the top of the Ratchet Buckle which works just the same as snowboard binding does, that release the pressure & allows you to step out...

The main Foot-Strap has a special 'Lug or locator' on the top of the Foot-Strap to house a special Hook that protrudes from the underside of Ratchet Buckle. This hook presses into the 'Lug' on the top of the Foot-strap preventing any sideways movement in the connection of the Strap & Ratchet Buckle

The Ratchet Buckle connects with a special M5 Star nut & M5x8mm Countersunk bolt & the Ratchet is mounted on the top of the Main Foot Strap. The LADDER STRAP Positions on the outside of the foot & feeds into the Ratchet Buckle. Levering the Ratchet buckle brings the two straps together. The Ratchet Buckle locks each time you lift the buckle tightening the two straps together until you have a snug but not tight connection over the top of your foot. The release clip can be tuff to move specially of your bindings have been ratcheted tight.

Ratchet Bindings work at their absolute optimum when combined with TRAMPA Heel Straps. HEEL STRAPS Completely lock your feet into any of the TRAMPA bindings to make you feel at one with the deck. When using Heel Straps you are 100% committed to the ride & by doing so you gain so much more control over the board.  

With 3 pairs of different length Ladder Straps to choose from, the TRAMPA Heel Straps easily adjust to fit to any sized shoe that comfortably fits onto a Mountain Board . A CAMLOCK BUCKLE on one side of the strap is used to Lock the Ladder Strap on one side of your foot whilst a Ratchet Buckle is used on the other side for easy tightening/loosening adjustment. The Ratchet Buckle easily tightens the Ladder into the Heel Straps so that your foot is locked into a comfortable position!. 

TRAMPA Heel Straps are universally fitting and are supplied with a Marine Grade Stainless Steel FITTING KIT as standard, so only take a few minutes to assemble. 

ALL TRAMPA Bindings are assembled using a Marine grade A4 Stainless Steel hardware. The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require.

All TRAMPA bindings use Stainless steel Dome Headed Bolts, connected through the Footstrap into L-Brackets, ensuring no discomfort to the foot. 

The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require 

TRAMPA's huge range of bindings are the most customisable on the market - meaning you’ll be able to get the perfect fit for your riding style - in any colour scheme you can think up.