This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

INFINITY ATB Hanger - 12mm SOLID Axles Painted Black & CNC'd Kingpin hole

INFINITY ATB Hanger - 12mm SOLID Axles Painted Black & CNC'd Kingpin hole INFINITY ATB Hanger - 12mm SOLID Axles Painted Black & CNC'd Kingpin hole Wheel support spacer for all TRAMPA Wheels on 12mm ATB Axles - CNC precision 12mm x 16mm x 18.2mm - SILVER 7/16ths Nut - Marine Grade Stainless steel Nylock Axle HALF nut (W7/16-20T UNF) - Fits to 12mm Axles
RRP
£62.50
inc tax

The INFINITY HANGER is the strongest SPRING TRUCK Hanger in the TRAMPA product range! To ensure the maximum strength possible the hanger body is made from FORGED ALUMINUM and is one solid piece - with no weight saving holes !

The Infinity Hanger is drilled & fitted with 12mm SOLID STEEL Axles. The Axles have also been HEAT TREATED. Heat treating steel makes it substantially stronger & more resistant to impact. 12mm Solid Steel Axles are slightly heavier than alternatives displayed on the TRAMPA website, but they are by far the strongest Axles in the TRAMPA range. Marine Grade Stinless steel GRUB SCREWS help keep the Axles locked into the correct place within the Hanger,

A CNC milling machine is used & guarantee's to drill the Kingpin Holes accurately. Ensuring the Kingpin Holes are accurately placed guarantees the best performance to the rider, as well making the truck easy to assembly & service. The Infinity Hanger is EDP painted MATT BLACK for metal protection & colour coordinating good looks before the CNC work is carried out.

The Infinity Hanger measures 16 Inches in total width. When the wheels are fitted to the Hanger, the board has a center wheel width of 14 Inches. The Infinity hanger will fit to all TRAMPA Baseplates.

TRAMPA's Infinity Hanger uses 2x 18.2mm x 12mm SPACERS (1 either side). The spacer slips onto the axles, leaving the perfect space to mount the TRAMPA wheels accurately. Use the 7/16ths of an inch Axle Nuts to lock the wheels into place on the axle.

Kingpin bushings push into the Kingpin holes, in both the Hanger & the Baseplate. When all the bushings are in position, push the Baseplate over the Hanger and into position so that all the Kingpin holes line up. When this is the case you will be able to push the kingpin, from the front to the truck to the back, through the holes in the assembly, connecting them all together. Remember to add the washer onto the kingpin before sliding into the assembly.

INFINITY ATB Hanger - 12mm SOLID Axles Painted Black & CNC'd Kingpin hole

The ATB INFINITY HANGER is time proven as being the strongest ATB SPRING TRUCK Hanger on the market! Ensuring we deliver the maximum strength possible the hanger body of all of the Spring Trucks in the TRAMPA range are made from super strong FORGED ALUMINUM & this INFINITY hanger is one solid entity with no weight saving cut outs or or fancy Axels & weighs in as the Strongest!

The Infinity Hanger is machined on the underside to allow countersunk bolts to push through & position the springs in the correct locations. The Infinity ATB Trucks has been given 2 Spring position settings, allowing Inside spring position setting for easy/fast carve steering & outside spring position for larger sized or high speed thrill seeker riders!

The Infinity ATB Hanger is drilled & machine fitted with Heat Treated 12mm SOLID STEEL Axles. HEAT TREATING the steel axles makes them substantially stronger & far more resistant to impact - perfect for larger sized adult riders. 12mm Solid Steel Axles are slightly heavier than alternatives displayed on the TRAMPA website, but they are by far the strongest Axles in the TRAMPA range. Once the 12mm Solid Axles are machine fitted the INFINITY hanger measures 16 Inches at its widest points & when any of the 5, 6, 7 or even 8 Inch HYPA or SUPERSTAR wheels are fitted to the Hanger, the board has a center wheel base width (Center point of contact to the floor) of 14 Inches.

CNC milling usually guarantees precision work & that's why the Infinity hanger has had the Kingpin holes CNC machined insuring the Kingpin Holes are accurately placed guarantee's the best performance to the rider as well as making the truck easy to assembly & simple to service. Before the CNC work is completed the ATB Infinity Hanger is Anodised BLACK for metal protection.

7/16ths Nut - Marine Grade Stainless steel Nylock Axle HALF nut (W7/16-20T UNF) - Fits to 12mm Axles

This very special 7/16ths of an inch Marine Grade Stainless steel Nyloc HALF NUT is custom made specially to fit the TRAMPA products. Half nut means - half as the size of a regular nut, so half the size = half the weight of a normal nut.. By using Half nuts on the axles reduces the over all length of the axle & kingpin therefore further reducing weight in the Truck! A few Grams here & a few grams there soon adds up & makes all the difference to the total Truck & consequently deck weight, specially in critical areas of the deck such as the wheels area, where a few grams makes all the difference...

This very special 3/8ths of an inch Marine Grade Stainless steel Nylock Half Nut official factory measurements are  W7/16 - 20T - UNF. This Nut is used to hold the wheels onto the axles of the Spring Trucks fitted with 12mm axles. The Nut is fitted as standard with the world renowned NYLOC System. The Nyloc "locks the Nut onto the Bolt" eliminating vibration, keeping your nuts tighter for longer!

Use a 16mm or 5/8thths of an Inch spanner to tighten / loosen the Nut onto the Axle or Kingpin. Do not overtighten the nut & make sure the wheel can spin freely but does not rattle & do not crush your bearings. Being Marine Grade Stainless Steel this nut will not rust you! Always ensure all ur nuts are tight before you ride!

Wheel support spacer for all TRAMPA Wheels on 12mm ATB Axles - CNC precision 12mm x 16mm x 18.2mm - SILVER

This special Spacer measures 12mm (id) x 16mm (od) x 18.2mm (long) & has 2 uses!. It is firstly known as the Bearing Support Spacer as this Spacer fits between the Bearings of a 6 Spoked HYPA Hub, (when mounting the HYPA wheel onto 12mm Axles) & secondly it is also known as the AXLE SUPPORT SPACER as this spacer is also used to position any of the TRAMPA wheels in the perfect position onto the axles of 12mm TRAMPA Spring trucks....

TRAMPA spacers are produced as one long tube. The Tube is Heat Treated to gain extra strength & is then Bead Polished to give the metal extra surface protection & a shiny best appearance. The tube is then cut to the exact length for precision mounting. 

The TRAMPA ULTIMATE hanger has been designed for riders who want the best. The TRAMPA ULTIMATE hanger is ultra high spec and as a result very lightweight. It's renowned for its high level of precision, strength, reliabillity and durability.

It's claimed the TRAMPA ULTIMATE hanger is the worlds strongest and lightest spring truck hanger on the market! We think its by far the best! It fits to both the Infinity and Vertigo base plates. The TRAMPA ULTIMATE hangers are CNC precision drilled for easy and accurate assembly, resulting in super smooth and optimum steering to the rider. The precision CNC machining also removes all excess material to save every gram of weight possible..

The TRAMPA ULTIMATE hanger comes fitted as standard with top quality 7/16ths solid TITANIUM axles. The 7/16ths TITANIUM axles will fit to all Trampa hubs and wheels by using the 7/16ths or 10mm skate truck sized Trampa Bearings.


The ATB INFINITY HANGER is time proven as being the strongest ATB SPRING TRUCK Hanger on the market! Ensuring we deliver the maximum strength possible the hanger body of all of the Spring Trucks in the TRAMPA range are made from super strong FORGED ALUMINUM & this INFINITY hanger is one solid entity with no weight saving cut outs or or fancy Axels & weighs in as the Strongest!

The Infinity Hanger is machined on the underside to allow countersunk bolts to push through & position the springs in the correct locations. The Infinity ATB Trucks has been given 2 Spring position settings, allowing Inside spring position setting for easy/fast carve steering & outside spring position for larger sized or high speed thrill seeker riders!

The Infinity ATB Hanger is drilled & machine fitted with Heat Treated 12mm SOLID STEEL Axles. HEAT TREATING the steel axles makes them substantially stronger & far more resistant to impact - perfect for larger sized adult riders. 12mm Solid Steel Axles are slightly heavier than alternatives displayed on the TRAMPA website, but they are by far the strongest Axles in the TRAMPA range. Once the 12mm Solid Axles are machine fitted the INFINITY hanger measures 16 Inches at its widest points & when any of the 5, 6, 7 or even 8 Inch HYPA or SUPERSTAR wheels are fitted to the Hanger, the board has a center wheel base width (Center point of contact to the floor) of 14 Inches.

CNC milling usually guarantees precision work & that's why the Infinity hanger has had the Kingpin holes CNC machined insuring the Kingpin Holes are accurately placed guarantee's the best performance to the rider as well as making the truck easy to assembly & simple to service. Before the CNC work is completed the ATB Infinity Hanger is Anodised BLACK for metal protection.

INFINITY Hanger Powder-coated with Heat Treated 12mm SOLID steel Axles
12 x 18.2mm Wheel Support Spacer for all TRAMPA Wheels on 12mm ATB Axles - SILVER
7/16ths (12mm) Marine Grade Stainless steel Nylock Axle HALF nut
Black Infinity Hanger
Weight: 580g
Quantity required:
RRP £62.50 - each

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon