Home»Scooters»G-Bar PRO Scooters»G-Bar Pro Scooter BLACK Powder Coated with SUPERSTAR Wheels

M5 x 8mm Countersunk Allen-Key Bolt - Marine Grade Stainless steel with locking paste

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

The head of this Bolt is COUNTERSUNK, meaning that when screwed into position it sits flush & neat with the surface its screwed into. Preventing bolts from standing proud eliminates the chance of anything getting "snagged or hung-up" should it get caught on something..

Used For;

-Ratchet Bindings

-Camlock Bindings

-Heelstraps

-3d Sprung Steel Flex Brake

M4 x 40mm Socket Capped Allen-Key Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 40mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special Bolt is specifically made for TRAMPA & is used to assemble the TRAMPA SUPERSTAR HUBS. The socket capped head of the Bolt screws neatly though the Spokes & into the fixing point in the Rim of the SUPERSTAR HUB eventually screwing  into the M4 nut on the other side easly.

Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

USED FOR CONNECTING:  

SUPERSTAR HUBS       
MEGASTAR HUBS       
PHATLADS HUBS

M5 Nut - Marine Grade Stainless steel Nylock Nut - Fixes to Trucks & Bindings

Introducing TRAMPA's M5 (5mm Thread) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M5 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts. 

This Nut is used to fix to the Regular shaped M5 Bolts that hold the TRUCKS to the DECK for all  Decks & also for the Dome Head Bolts connecting the L BRACKETS to the Bindings. Use an 8mm spanner or Ratchet Drive to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

M6 Nut - Marine Grade Stainless steel Nylock Nut - Fixes Bindings & Trucks to Deck

Introducing TRAMPA's M6 (6mm Thread) A4 Grade Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M6 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK System is fitted as standard to all TRAMPA Nuts. 

This Nut is used to fix to the Regular shaped M6 Bolts that hold the TRUCKS to the DECK for the HOLYPRO Decks & also for the countersunk bolts connecting the L BRACKETS TO the DECKs. Use an 10mm spanner or SOCKET for a Ratchet Driver to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

M6 Nut - Marine Grade Stainless steel Nylock Nut - Fixes Bindings & Trucks to Deck

Introducing TRAMPA's M6 (6mm Thread) A4 Grade Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M6 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK System is fitted as standard to all TRAMPA Nuts. 

This Nut is used to fix to the Regular shaped M6 Bolts that hold the TRUCKS to the DECK for the HOLYPRO Decks & also for the countersunk bolts connecting the L BRACKETS TO the DECKs. Use an 10mm spanner or SOCKET for a Ratchet Driver to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

PRECISION Shim spacer - STAINLESS STEEL - Bridges tiny gaps on axles - 9.525 x 13.525 x 1mm

This tiny STEEL Shim Spacer is precision made to give maximum performance! It is used to hold the bearings in the perfect position & also to bridge tiny gaps on the axles, ensuring an accurate fit with NO rattles!

The Shim spacer slips onto the axle fitting either side of the Bearings when the wheel is being fitted onto 9.525mm Axles.

This tiny spacer positions the wheel perfectly on the axle, holding the Bearing in the best possible place to help achieve maximum spin rate for the wheel. Its little parts like these that suffer the most amount of abuse, especially when they are used in the harsh conditions that they are. Check from time to time they are in good order & possibly replacing them every now & then this good proactice will ensure your board stays in tip-top condition, always!

PRECISION Shim spacer - STAINLESS STEEL - Bridges tiny gaps on axles - 9.525 x 13.525 x 1mm

This tiny STEEL Shim Spacer is precision made to give maximum performance! It is used to hold the bearings in the perfect position & also to bridge tiny gaps on the axles, ensuring an accurate fit with NO rattles!

The Shim spacer slips onto the axle fitting either side of the Bearings when the wheel is being fitted onto 9.525mm Axles.

This tiny spacer positions the wheel perfectly on the axle, holding the Bearing in the best possible place to help achieve maximum spin rate for the wheel. Its little parts like these that suffer the most amount of abuse, especially when they are used in the harsh conditions that they are. Check from time to time they are in good order & possibly replacing them every now & then this good proactice will ensure your board stays in tip-top condition, always!

8mm STAINLESS STEEL king pin for Spring trucks

This M8 x 80mm STAINLESS STEEL Spring Truck Kingpin is used to connect the Hanger & the Baseplate on any of TRAMPA's Spring Trucks.

Using high quality metals & sizing down to a 8mm Kingpin, we have managed to save loads of weight whilst retaining all the strength necessary for the job!

This M8 x 80mm Kingpin uses an 8mm Washer to support the busing from the outside & a 6mm washer to protect the bushing on the inside side & connects into an M6 Nut. You'll need a 4mm Allen key to hold the Kingpin & a 10mm spanner to tighten/loosen your M6 Kingpin Nut.

This Kingpin pushes through plastic bushings before being placed into position in the Truck System. The Plastic bushings allow the metal parts (Hanger & Baseplate) to move freely inside each other without allowing the metal parts to touch or wear out.

The plastic bushings will wear out over time & use & will eventually perish & need replacing. SO, make sure your Bushings are always in good working order after riding riding or when upgrading your Kingpin, it might be time to replace them too due to the unavoidable wear & tear of moving mountainboard parts.

 

8mm STAINLESS STEEL king pin for Spring trucks

This M8 x 80mm STAINLESS STEEL Spring Truck Kingpin is used to connect the Hanger & the Baseplate on any of TRAMPA's Spring Trucks.

Using high quality metals & sizing down to a 8mm Kingpin, we have managed to save loads of weight whilst retaining all the strength necessary for the job!

This M8 x 80mm Kingpin uses an 8mm Washer to support the busing from the outside & a 6mm washer to protect the bushing on the inside side & connects into an M6 Nut. You'll need a 4mm Allen key to hold the Kingpin & a 10mm spanner to tighten/loosen your M6 Kingpin Nut.

This Kingpin pushes through plastic bushings before being placed into position in the Truck System. The Plastic bushings allow the metal parts (Hanger & Baseplate) to move freely inside each other without allowing the metal parts to touch or wear out.

The plastic bushings will wear out over time & use & will eventually perish & need replacing. SO, make sure your Bushings are always in good working order after riding riding or when upgrading your Kingpin, it might be time to replace them too due to the unavoidable wear & tear of moving mountainboard parts.

 

Axle Kingpin mounting bushings for TRAMPA Scooter

1mm Base Kingpin bushings for Spring Trucks. These bushings are housed within the Baseplate and Hanger. They allow the kingpin to move freely when the Truck is constructed. Made with different thickness base's to avoid any tolerance issues in production. Produced from the highest standard plastics available to ensure maximum Durabillity & to enable the best maximum performance in your Trucks. Check & replace these bushings from time to time to ensure your steering stays in top condition.    

Axle Kingpin mounting bushings for TRAMPA Scooter

1mm Base Kingpin bushings for Spring Trucks. These bushings are housed within the Baseplate and Hanger. They allow the kingpin to move freely when the Truck is constructed. Made with different thickness base's to avoid any tolerance issues in production. Produced from the highest standard plastics available to ensure maximum Durabillity & to enable the best maximum performance in your Trucks. Check & replace these bushings from time to time to ensure your steering stays in top condition.    

12mm Bearing for TRAMPA All Terrain Mountain Boards 12x 28x 8mm with BLACK sidewalls & Embossed TRAMPA Logo ABEC 5 6001 2RS

12mm Bearing for TRAMPA All Terrain Boards 12x 28x 8mm with RED sidewalls & Embossed TRAMPA Logo ABEC 5 6001 2RS

10mm Rubber O-Ring to fit in Bearings - 2mm Section x 10mm Bore NITRILE 70

This O-Ring should be fitted when a 12 x 16.5mm Bearing Support Spacer is fitted into the wheel assembly when fitting a wheel onto 12mm Axles.

It fits alongside the Bearing Support Spacer, in-between the Bearings. This O-Ring prevents rattles from the spacer against the bearings. Over time, during the usage of your board, the bearings & spacers are put under a lot of force. Ultimately this force has to go somewhere... The Bearings use a Steel ring in their assembly where as the Bearing Support Spacers are made from Aluminum. Steel is much stronger than Aluminum & when forced against each the aluminum will loose out every time! This is what happens to your spacers between the bearings, the Bearings put force onto your spacers as a consequence over time the spacers shrink... With enough time its possible for an annoying rattle to start.... That's when you fit these little O-Rings!! :-)

10mm Rubber O-Ring to fit in Bearings - 2mm Section x 10mm Bore NITRILE 70

This O-Ring should be fitted when a 12 x 16.5mm Bearing Support Spacer is fitted into the wheel assembly when fitting a wheel onto 12mm Axles.

It fits alongside the Bearing Support Spacer, in-between the Bearings. This O-Ring prevents rattles from the spacer against the bearings. Over time, during the usage of your board, the bearings & spacers are put under a lot of force. Ultimately this force has to go somewhere... The Bearings use a Steel ring in their assembly where as the Bearing Support Spacers are made from Aluminum. Steel is much stronger than Aluminum & when forced against each the aluminum will loose out every time! This is what happens to your spacers between the bearings, the Bearings put force onto your spacers as a consequence over time the spacers shrink... With enough time its possible for an annoying rattle to start.... That's when you fit these little O-Rings!! :-)

8 Inch Inner Tube PRIMO 8x2 inch 200x50mm - fits 3.75 inch Rims & 8 inch tyres

PRIMO's own 8 Inch Inner Tube has dimensions of 200mm (outer diameter) x 50mm (width) & will fit into all known 8 inch Tyres & ATB hubs on the market!

The CST PRIMO Inner Tube incorporates slightly thicker rubber into its manufacture process which means the tube is slightly heavier than alternatives but does allow the rider to inflate slightly higher. This extra thickness also gives some extra resistance to punctures, but punctures suck, so always carry a spare inner tube when you are riding as you never know when you might get one.  

The PRIMO Tube uses a 90º Brass Inflation valve which will not rust on you & comes as you would expected with a plastic "anti dust" valve cap!

Genuine SUPERSTAR CENTER-SET Rim 3.75x 2 Inch fits all 3.75 Inch Tyres - CUSTOM

TRAMPA's SUPERSTAR Hub is a technically designed super-strength masterpiece of circular lushness, created for those who insist on fitting only the very best equipment! SUPERSTAR Hubs are available in loads of different Rim & Spoke colour combinations, its almost impossible to decide the combination you like the most!

The SUPERSTAR hub handles the highest inflation pressures on the market, which in turn increases roll speeds giving the rider the adavantage over the competiton, making them perfect for the best riders, i mean the insane! The SUPERSTAR Rims are produced using original DuPont materials (The Best) whilst the Spokes use Extruded Aluminum thats T6 Heat treated (Super Strength Aero-grade quality) which is all constructed using A4 (Marine Grade) Stainless Steel Nuts & Bolts. Total & absolute product perfection!

SUPERSTAR Hubs are compatible with all known 8 inch tyres on the market today! Disk Brakes & Drive Gears for Electric motors can also be fitted to these amazing SUPERSTAR wheels... Watch this space for Hot NEWS on E Trampa...

Bearings can be purchased at a discounted price when purchased with Hubs. 2x Bearings cost only £2.50 = £10 per set of 8 making a £5 saving per set!

TRAMPA's SUPERSTAR Hub is a technically designed super-strength masterpiece of circular lushness & has been created for those who insist on fitting only the very best equipment! SUPERSTAR Hubs are available in loads of different Rim & Spoke colour combinations, its almost impossible to decide the combination you like the most!

The SUPERSTAR hub handles the highest inflation pressures on the market, which in turn increases roll speeds giving the rider the advantage over the competition, making them perfect for the best riders, i mean the insane! SUPERSTAR Rims are produced using original 'DuPont' materials (the best), whilst the STAR SPOKES are made using a custom made mould to give us an Extruded Aluminum profile that gets T6 Heat treated (Super Strength Aero-grade quality) & then sliced to requirement.

The SUPERSTAR Hub/wheel is fully constructed using A4 (Marine Grade) Stainless Steel Nuts & Bolts. Total & absolute product perfection!

SUPERSTAR Hubs are compatible with any tyre that TRAMPA offers up to 8 inches in size!

Disk Brakes for steep free-ride riding & Drive Gears for Electric boards or Electric motors can also be fitted to these amazing SUPERSTAR wheels... 

Bearings can be purchased at a discounted price when purchased with complete Hubs or wheels.

 

 

 

CLASSIC 5 SPOKE for or any size MEGASTAR Rim - Extruded T6 Aluminum Heat treated & CNC Precision milled fits all SUPERSTAR & MEGASTAR Wheels

TRAMPA SPOKES for Superstar or Megastar Hubs. TRAMPA's Spokes are produced using T6 Heat-Treated 6061 Aero-grade "Top Quality" Aluminum, which is forced through an Extrusion Die. Our Spokes are made in one continuous piece - once extruded the resulting profile is T6 Heat Treated - making the Alloy extremely strong. 

The spokes are bead polished to take away and sharp edges then the spokes are sent away to the Anodisers to have the relevant colours added. Once the colour has been added the precision CNC machine is put back to work to mill out the bearing housing perfectly. 

Check your spoke support spacers, O-Rings and hardware is in good condition when changing spokes & ensure all of your nuts & bolts are tight before you ride!

 

 

 

CUSTOM Spoke Support spacer - Installing a Spoke Support Conversin Spacer allowsyou to fit SUPERSTAR or MEGASTAR hubs to 9.525mm & 8mm Axles such as Evolve, Boosted & many others

This is the TRAMPA SUPERSTAR Spoke Support Spacer. It is used to gain extra strength for the SUPERSTAR wheel design by adding support to the Aluminum Spokes when the wheel is being used under high inflated pressures...

Precision injection moulded, using original DuPont materials, this Spacer provides essential support for the Spokes in the Superstar hubs. There is a Deep Shelf on the Rim of the Spacer which pushes into the internal side of the Spoke, positioning the Spacer/spoke perfectly for assembly. The thick plastic ensures a very strong support platform maximising Bearing support & spin rate always....

Ensure all your nuts & bolts are tight before riding!!

 

 

 

TRAMPA's 8 Inch Tyre measure 3.75x 2x 8 200x50mm with 3.75 inch Rim fits too all 3.75 inch Hubs & 3.75/4 inch Rims

The PRIMO ALPHA Lite tyre is a super light-weight Off-Road Tyre. Using just 2 PR of the finest grade rubber & incorporating a very high TPI under its skin combined together these secret details reduce weight considerably, making its reputation as the worlds best Off Road 8-inch Tyre! When inflated the PRIMO ALPHA Lite tyre measures 200x50mm. The Tyre incorporates a 3.75 inch Steel Band into the rim to hold everything in position & it slips onto the TRAMPA hubs perfectly. The ALPHA tyre will fit to all known hub Brands that are used for Mountainboarding & Kiteboarding. 

Made from relatively softish rubber the ALPHA tyre gives fantastic grip. Its design incorporates a wide center bead to allow & maintain straight line speed, whist its surrounding edges are beautifully sculptured wide grooves that supply high levels of grip regardless of the terrain type. - This tyre really is great for all off road applications.

The more you inflate your Tyres the faster you will roll!  The official maximum inflation pressure set by the factory for the ALPHA Tyre is 50psi, but the ALPHA Tyres are made so well & the TRAMPA Hubs are so strong that our Crash test Dummies (I mean Team Riders) have been known to inflate these Tyres well beyond their recommended pressures with no problems to mention. Over inflating your tyres may lead to an explosion which could seriously injure you. If you do decide to go beyond the max inflation pressure ensure your nuts & bolts are tight & deflate back to a regular pressure after use.

3D QUALA T Scooter Frame Badge

Everybody loves stickers, especially TRAMPA stickers! TRAMPA's Old Skool VINYL Stickers are pain-stakingly Hand Made at the TRAMPA HQ using the absolute finest Vinyl material available! So long as the area it is to be stuck to is clean the Vinyl we use is guaranteed to stick well & not fade for well over 5 years and most likely much longer! These BLUE Vinyl Stickers are sized to fit underneath the TRAMPA deck, the dimensions are 370mm long x 70mm high.

There are loads of colours to choose from & the price starts at just £2.50 each - so custom pimping your deck, car, van, boat, bedroom window or any other surface you can think of that would benefit with a TRAMPA logo slapped on it is really easy & cheap and easy to do...

Help TRAMPA the world with the Pimp-est vinyl stickers EVER! To Apply the Stickers - Ensure the surface you re applying too is clean & grease free before applying the sticker. Peel the thick side away from the Masking tape so the sticker appears in reverse (negative) and simply lay the masking tape onto the surface in question. Using your fingers or a soft cloth, rub the masking tape, forcing any air out of the vinyl & allowing the vinyl to stick well. Then gently peel away the masking tape to reveal the Vinly.

Powdercoated TRAMPA G Bar Handlebars - Internally Fluted & Externally Step Tapered Down Tube, Externaly Fluted & Internally Networked & Butted Crossbar all of which has been Heat Treated & Black P

Introducing - TRAMPA G-BARs! The Worlds Strongest & lightest Handlebars made to fit all oversized Scooters!!

The 'G' stands for "GOLF" & is so-called after the work that has been completed on the DOWN-TUBE. The Down-tube has been produced using a 'STEP-TAPERING" Technique which is usually only ever seen in the production of expensive Golf Clubs. The STEP-TAPERING maximizes steel strength to the MAX! 

With its radically new visual design it is typically OVERSIZED (which is just as expected from the boys at TRAMPA cus we have an incredible reputation for only making the very best of products) & so TRAMPA's G-BAR Handlebars will also fit universally to any quality scooter that's already out there ripping the streets!!  

G-BARS are produced using GENUINE TOP QUALITY 4130 CHroMOly STEEL, that gets HEAT-TREATED during production, gaining even more extra strength! Measuring 580mm from the bottom of the Down tube to the top of the Crossbar x 580mm at the Widest Points, not only are the G-BAR Handlebars striking to look they are also made as straight as a die in both directions with NO RAKE or RISE in their design!

The special mould we made for the 'DOWN-TUBE is INTERNALLY FLUTED' whilst the 'CROSSBAR is EXTERNALLY FLUTED'. Fluting Steel seriously increase's molecular strength & the G-BARS will handle some very serious abuse! Powder coated GLOSS BLACK for a fabulouse anti rust surface finish.

EMAIL SIGN UP