£0 
This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.
8mm STAINLESS STEEL king pin for Spring trucks
This M8 x 80mm STAINLESS STEEL Spring Truck Kingpin is used to connect the Hanger & the Baseplate on any of TRAMPA's Spring Trucks.
Using high quality metals & sizing down to a 8mm Kingpin, we have managed to save loads of weight whilst retaining all the strength necessary for the job!
This M8 x 80mm Kingpin uses an 8mm Washer to support the busing from the outside & a 6mm washer to protect the bushing on the inside side & connects into an M6 Nut. You'll need a 4mm Allen key to hold the Kingpin & a 10mm spanner to tighten/loosen your M6 Kingpin Nut.
This Kingpin pushes through plastic bushings before being placed into position in the Truck System. The Plastic bushings allow the metal parts (Hanger & Baseplate) to move freely inside each other without allowing the metal parts to touch or wear out.
The plastic bushings will wear out over time & use & will eventually perish & need replacing. SO, make sure your Bushings are always in good working order after riding riding or when upgrading your Kingpin, it might be time to replace them too due to the unavoidable wear & tear of moving mountainboard parts.
This M8 x 80mm STAINLESS STEEL Spring Truck Kingpin is used to connect the Hanger & the Baseplate on any of TRAMPA's Spring Trucks.
Using high quality metals & sizing down to a 8mm Kingpin, we have managed to save loads of weight whilst retaining all the strength necessary for the job!
This M8 x 80mm Kingpin uses an 8mm Washer to support the busing from the outside & a 6mm washer to protect the bushing on the inside side & connects into an M6 Nut. You'll need a 4mm Allen key to hold the Kingpin & a 10mm spanner to tighten/loosen your M6 Kingpin Nut.
This Kingpin pushes through plastic bushings before being placed into position in the Truck System. The Plastic bushings allow the metal parts (Hanger & Baseplate) to move freely inside each other without allowing the metal parts to touch or wear out.
The plastic bushings will wear out over time & use & will eventually perish & need replacing. SO, make sure your Bushings are always in good working order after riding riding or when upgrading your Kingpin, it might be time to replace them too due to the unavoidable wear & tear of moving mountainboard parts.
Weight: 31g
HCC: 7318159585
Related Products
-
King Pin bushings 2mm Base for Spring Trucks - -
Kingpin bushings 1.5mm Base for Spring Trucks - -
Kingpin bushings 1mm Base for Spring Trucks - -
Kingpin Bushing Re-enforcement Ring - Custom - -
Axle Kingpin mounting bushings for TRAMPA Scooter - -
Kingpin Bushing 2.5mm Re-enforcement Ring - -
Kingpin Bushings 3mm Base - for Spring Trucks - -
Kingpin Bushing 3mm Re-enforcement Ring - -
Kingpin Bushing 2mm Re-enforcement Ring - -
STEEL Kingpin M6x 8mm x 80mm for Spring Truck - Heavy Duty 12.9 Steel - -
Kingpin Bushings 2.5mm Base - for Spring Trucks - -
8mm NICKLE PLATED Kingpin - -
King Pin Bushings have different thickness bases & fit into all Spring Trucks -
+44 (0)115 8410006
All images and material on this site not covered by other copyright and not explicitly marked as public domain is © Trampa Boards 2000 - 2024