Home»Parts»TRUCK PARTS»SPRINGS DAMPA's & Retainers»TRAMPA DAMPA - YELLOW 65a

TRAMPA's SPRINGS are coiled to precision & fit into the TRAMPA Spring Trucks perfectly. They easily squeeze into the space between the Baseplate & Hanger & being made to measure they are firstly very easy to fit with no clamps or tools required to squeeze them into position & secondly to be super responsive to the rider.!  Once the spring assembly is fitted correctly the steering resistance is taken up instantly!

Our Springs have been designed to work in perfect harmony with the TRAMPA DAMPA's & TRAMPA SPRING RETAINER providing maximum performance from the "Spring assembly" to the rider. The DAMPA's drop into the SPRING & the SPRING RETAINERS seal the ends of the spring, holding the DAMPA in exact position to be pre-loaded & squeezed into the truck. Using just a little bit of muscle, squeeze the loaded spring into the truck, then lock the spring into position using the Spring Adjuster & M5 x 12mm Countersunk Bolt. The TRAMPA spring Truck steering system is highly responsive & totally customisable by interchanging the DAMPA's to harder Urethane. Other Mountain Board brands springs will not fit the TRAMPA Trucks as they are a different in dimension.

TRAMPA Springs are available in a selection of Powder-coated colours for good looks & of course for best surface coating protection & this one comes to you in Powder Coated Black. 

Spring length - 66.5mm
Spring external diameter - 30mm
Spring internal diameter - 21mm
Spring thickness - 4.2mm
Black Powder coated steel Spring.
Weight: 64g

The TRAMPA DAMPA is a Urethane Elastomer that fits inside the Spring of a Truck. Its purpose is to support the Spring & give extra resistance during steering. Its clever design has three balls stacked & connected on-top of each other. The middle ball is slightly fatter than the outer two, during steering they all compress against each other giving greater feed back in your turns. This stacked design gives a fantastic progressive feel to steering.

By varying the SHORE DUROMETER (Rubber Hardness) strength of the Urethane mixture, we can control the amount of movement in the DAMPA. This in turn allows the rider to custom tune the resistance of their steering perfect to their requirements. The spheres of the DAMPA fit perfectly into the cup of the specially made TRAMPA SPRING RETAINER which is the part that locates & locks the Spring in the the TRAMPA SPRING TRUCKS, and they instantly start to work with the slightest movement from the rider. TRAMPA DAMPA's work in harmony with the rider, supplying the perfect amount of steering resistance whilst eliminating all chances of speed wobble. Now available in 5 different steering resistance's for all levels of rider out there, Orange DAMPA's are for easy steering, whilst White DAMPA's are for the totally committed! 

Turning the Spring Adjuster clockwise pre-loads the tension in the Spring and DAMPA. This can be adjusted on the fly to suit the terrain & conditions. Turning the spring adjuster too much will put pressure on the DAMPA & eventually it may split. Rather than putting too much pressure into the DAMPA, consider up-grading the DAMPA to a harder Shore Durometer as this will most likely increase your performance than over tightening a DAMPA that's not stiff enough for you. Please use the table below for guide.

The design brief was simple: minimise speed wobble and provide the rider with a precision steering system. For this we give special thanks to Mr Mark Daniels (formerly of Kitedeck and DE- X) for creating this small but incredible product known as the Trampa Dampa!

The now famous Trampa Dampa has been around for quite some time and has proven to be an essential performance part when creating a high spec ATB. The Trampa Dampa allows riders to custom tune their boards turning and steering ability far greater than ever before.

The Trampa Dampa is a urethane elastomer which fits inside the spring of a truck. Its purpose is to give extra resistance and support the spring during steering. Its design has three balls stacked and connected on-top of each other with the middle ball being slightly fatter than the outer two. This clever design gives a more harmonious and progressive feel to steering

By varying the strength of the Urethane mixture we can control the resistance of the flex of the Dampa which in turn allows the rider to custom tune the resistance of the steering. The unique design of the Trampa Dampa allows for a harder urethane to be used.

The spheres of the Dampa fit perfectly into the cup of the specially made Trampa Spring Retainers inside the Spring of the Trampa Trucks and they instantly start to work with the slightest movement from the rider. The middle sphere is slightly larger and consequently cushions the flex of the smaller two giving greater feed back in your turns and steering. Trampa Dampas work in progressive harmony with the rider, supplying the perfect amount of steering resistance whilst eliminating all chances of speed wobble.

Now available in 5 different steering resistances for every weight or level of rider out there.

65 shore - Yellow - Easy steering
75 shore - Green - Firm Steering
80 shore - Red - Stiff Steering
85 shore - Blue - Very stiff steering
90 Shore - White - Stiffest steering

The Trampa Dampa's are perfect in length and width to slide in and out of the spring easily. The Dampas are then sealed into position by the retainers. Once fitted with the retainers the spring unit can be then be slipped into and out of position very easily by hand, making changing the dampa's extremely simple and easy to do.

Nothing feels like the original Trampa Dampa!