This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

Vertigo Hanger - MAGURA Hydraulic Brakes with Disks to fit SUPERSTAR Wheels

Vertigo Hanger - MAGURA Hydraulic Brakes with Disks to fit SUPERSTAR Wheels
RRP
£200+

The TRAMPA's MAGURA HS-11 BRAKE system is an incredibly powerful braking system that is certain to slow you down or even stop you dead if you squeeze to hard! By mounting MAGURA's Hydraulic Brake calipers (mounted in reverse fashion to that of a bicycle) onto a TRAMPA Brake Hanger & by squeezing the hand help brake lever as you ride, the hydraulic fluid (MAGURA Blood) runs evenly through the system applying pressure through the BRAKE PADS onto the special made 5mm thick Aluminum BRAKE DISKS. The Brake Disks can be mounted to any of the 5 Spoke wheels that TRAMPA offers. This incredibly powerful brake system prevents the need to get down & power slide, your always in contgrol of your speed and when going to quick for comfort will trim your speed suitably to make it around a tight corner without stopping or stop you dead should you so require. This incredibly powerful braking system will allow you to ride in places you have only ever imagined before!

MAGURA are a famous German company who specialise in hydraulic braking systems for bicycles. The HS-11 Hydraulic Brakes are MAGURA's original Hydraulic braking system. MAGURA have over 30 years of testing with this equipment. The HS-11 setup is also well proven to be perfect for our Mountainboarding application - specially when modified to fit to the immense TRAMPA Brake Trucks & SUPERSTAR RIMS. Using some clever mounting holes that we make into the Brake Hanger to hold the Brake Caliper completely steady, a change of cable length is used between the 2 Calipers and by mounting the brake calipers in reverse (pushing out rather than pushing in) the MAGURA Brake system neatly fixes onto the TRAMPA Brake hanger, positioning the caliper in the perfect for the best braking application against the Superstar Wheel...

The TRAMPA INFINITY truck (So called because infinity is for ever) is the strongest SPRING TRUCK in the TRAMPA product range! To ensure the maximum strength possible the Hanger body is made from FORGED ALUMINUM. It is one solid piece! The INFINITY Hanger is fitted with 12mm SOLID STEEL Axles. The Solid Axles are HEAT TREATED. Heat treating steel makes it substantially stronger, more resistant to impact & less prone to rust. 12mm Solid Axles are without doubt the strongest Axles in the TRAMPA range. The Axles are first Glued & then Screwed with a Marine Grade Stainless Steel Grub Screw locking them in the perfect position to mount your wheel too. The Hanger is connected to an EXTRUDED & T6 HEAT TREATED Aluminum BASEPLATE & as it's name suggests the INFINITY HS-11 TRUCK is designed to last forever!!

Once the Hanger has had its Axles fitted it is sent away to the CNC factory to have the Kingpin holes & the MAGURA Brake / E-Drive mounting points precision milled. CNC milling guarantees precision work. It is imperative that all of these important holes are accurately positioned in order to ensure the best performance to the rider, as well as making the Truck easy to assemble & service. The workers modify the back of the hanger by milling a flat surface so that we can mount the Brakes or E-Drive equipment flush against. We then drill an extra hole & insert it with a thread so to be able to screw in a bolt & fix something into it. A small semi-circle "Cradle" is milled at the top of the Hanger,  acting as an anchor, it eliminates movement normally associated to a single fixing point. We are able to fix the MAGURA Braking system or the NEW TRAMPA E-DRIVE system into this thread & cradle, making a very strong fix between the two. The HS11 Magura Braking System & the E-Drive system are both very powerful and they need a very strong mounting point for max performance.!

In order to give the "Two Tone Pimp Finish" the INFINITY Hanger is EDP painted MATT BLACK for metal protection & colour coordinating good looks before the CNC work is carried out. The INFINITY Brake Board / E-Drive Hanger measures 16 Inches in total width. When the wheels are fitted to the Hanger, the board has a "center wheel width" of 15 Inches.

Once back from the CNC factory the MAGURA HS11 Hydraulic Brake calipers are filled with MAGURA Brake fluid (MAGURA Brake Blood) before being then fitted to this Hanger! The Brakes come to you as a pre-assembled set, including BRAKE DISKS, SPACERS & specially made M4x52.5mm Countersunk BOLTS ready to fit the Brake Disks directly to your SUPERSTAR Wheels. The MAGURA Brake system is very powerful. It can be fitted to the front or the back of the board to suit your riding preference & will stop you faster than you have ever imagined before! It has transformed the riding experience for many riders, opening up what was previously un-ridable terrain into easily conquerable terrain.

The HS11 Hydraulic Brake System is designed to fit the 35° HS11 Brake Deck or the 35° HolyPro Deck without any modification needed at all. The HS11 Truck will also fit to any 35° TRAMPA Deck, but as the calipers take up a lot of space on the hanger, some modifications may be needed to be made to the deck, in order to create the space to house them to allow the deck to steer correctly.

TRAMPA's MAGURA HS 11 BRAKE system is an incredibly powerful braking system developed solely for the TRAMPA Trucks. The MAGURA Brakes give you the ability to transform your riding range, making terrain you had previously thought of as 'Off Limits' into new & easily ride-able or even dream-able terrain you just have to ride! You will quickly gain a new air of confidence in your ability by riding with the MAGURA Hydraulic brake system!

By gently squeezing the hand held brake lever this incredibly powerful braking system will progressively slow you to a halt or squeeze hard & it will skid you to a stop! Squeezing the HAND HELD BRAKE LEVER forces the MAGURA BLOOD (hydraulic fluid) through the pipe system, equally pushing the BRAKE PADS onto both of the 5mm thick Aluminum BRAKE DISKS at the same time. 10mm Brake disk mounting spacers position the Brake Disks perfectly against the mega-strong T6 Heat Treated SPOKES supplying plenty of space either side either side of the disk gaining good ventilation, maintaining cool operating temperatures & therefore eliminating Brake fade over prolonged periods of use such as long Alpine descents...

MAGURA are a famous German company producing Hydraulic Braking Systems. The HS-11 Hydraulic Brakes are MAGURA's original Hydraulic braking system. MAGURA have had over 40 years of testing with this equipment in all kinds of terrain on all kinds of wheeled vehicles. The HS-11 setup is time tested & well proven to be perfect for our Mountainboarding applications - specially when modified & fitted to the immense TRAMPA TRUCKS & SUPERSTAR RIMS.

12mm HOLLOW Axle VERTIGO Trucks
Weight: 0g
Do you want Solid or Vented disks?
Do you want Solid or Vented disks?

SOLID Disks
SOLID Disks

VENTED Disks (+£5)
VENTED Disks (+£5)

Quantity required:
We have enough parts to make…  
RRP £200 - for the complete set

Excluding VAT
HCC: 9506911000

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon