This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

Urban Treads to Stickies Orrsom Conversion kit - 83 0r 90mm Longboard wheels for TWIN Motor

Urban Treads to Stickies Orrsom Conversion kit - 83 0r 90mm Longboard wheels for TWIN Motor Slave Wheel for TRAMPA 83mm & 90mm Longboard Wheels Custom CENTERING RING M4 x 40mm Socket Capped Allen-Key Bolt - Marine Grade Stainless steel with locking paste 375mm x 15mm High Torque Drive (HTD) 5M (5mm Tooth Spacing) High Power (HP) MIGHTY BELT for GUMMY Wheels with 44 Tooth Pulleys on ORRSOM longboards TRAMPA STICKIES Longboard WHEELS 83 or 90mm x set of 4 R6-2RS Abec 7 Bearings TRAMPA STREET CARVE  9.525mm Axels (9.525 x 22.225 x 7.14mm) x8
RRP
£125+

375mm x 15mm High Torque Drive (HTD) 5M (5mm Tooth Spacing) High Power (HP) MIGHTY BELT for GUMMY Wheels with 44 Tooth Pulleys on ORRSOM longboards

This is a 375mm long x 15mm wide High Torque Drive (HTD) Re-enforced Rubber Belt, which has 5mm Tooth Spacing (5M).

All of the Transmission Belts TRAMPA uses are a High Power (HP) rated. They are made by the world famous German company called STRONGBELT & thier belts are normally used for heavy industry applications.

We use this Strongbelt is used to transfer the power from the motor, through the Motor Pulley generating movement in the slave wheel of the TRAMPA ORRSOM Electric Longboards.

TRAMPA opted to set a new standard in E-Skating, becoming the first in the world to fit to all of the E-Boards in its range, a 15mm wide TRANSMISSON BELT as standard! Our standard 15mm belt is almost double the width of nearly all other E-Sk8's out there, they tend to use a flimsy off the shelf 8/9mm transmission belts which can be prone to stretch, slip & ultimately snap. 

Using a re-enforced 15mm wide High Power Belt reduces stretch, eliminates slip & as a consequence provides a constantly smooth whilst incredibly intuitive power delivery direct to the rear Drive Wheels of your board. When accelerating or engine breaking (KERS), even from a standing start the STRONGBELT power is smooth & does not slip, or strain the motor, it does a damn gooood job!.....

STRONGBELT, as their name suggests, is a heavy industry brand that usually supplies the likes of Train manufacturers, where serious levels of quality with no excuses on failure are expected from the product as standard, as failure for such an item is serious as the consequences may result in death! STRONGBELT weave KEVLAR into their Pulley Belts, Kevlar is one of the strongest fibers known to man, its often added into materials to gain extra strength.... STRONGBELT have the best reputation in the Power Transmission Industry. These extra quality details in the production of our electronic motor drives, provides the maximum responsiveness achievable whilst maintaining a super smooth power delivery to the rider at all times. 

Slave Wheel for TRAMPA 83mm & 90mm Longboard Wheels

TRAMPA's 33 Tooth Slave Wheel connects into all of TRAMPA's 83mm & 90mm Longboard Wheels perfectly! It connects through the Longboard Wheel using an Aluminum Centering Ring & M4 x 40mm Bolts with M4 M4 Nylock Nuts to lock it into position.

This custom made Slave Wheel can accept any size belt up to 17mm. TRAMPA uses's a German made 15mm wide STRONGBELT which provides a very smooth power delivery to the user, even from a standing start....

Changing your Motor Pulley &/or Slave pulley wheels will drastically change the performance characteristics of your ride... Small Pulleys at the Wheel Slows accelleration but increase's top the speed! :-)

Custom CENTERING RING

With the use of 6x Marine Grade Stainless Steel M4x40mm Socket Capped Bolts & 6x M4 Nylock Nuts, TRAMPA's Longboard Wheel Slave Wheel CENTERING RING, which is made from Solid Aluminum, connects through & around the spokes of the 83 or 90mm Longboard Wheels, locking the Slave Wheel solid in position into the wheel & ready to be connected to the HTD (High Torque Drive) Rubber STRONGBELT to give for some super smooth, high speed electric motor action!

M4 x 40mm Socket Capped Allen-Key Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 40mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special Bolt is specifically made for TRAMPA & is used to assemble the TRAMPA SUPERSTAR HUBS. The socket capped head of the Bolt screws neatly though the Spokes & into the fixing point in the Rim of the SUPERSTAR HUB eventually screwing  into the M4 nut on the other side easly.

Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

USED FOR CONNECTING:  

SUPERSTAR HUBS       
MEGASTAR HUBS       
PHATLADS HUBS

9.525 x 13.525 x 10.3mm - Internal Bearing support & External Wheel Support Spacer for STICKIES Wheels on MINI Spring Trucks

Precision made to ensure an accurate fit with no rattles, this Polished9.525mm x 13.52mm x 10mm long "precision made Aluminium spacer" fits onto the axles of the Carveboard Trucks & also in-between the Bearings of the Carveboard Wheels. The Bearing Support Spacers get crushed over time from constant tightening, so check the spacer is fitting well and replace if necessary over time.

R6-2RS TRAMPA Mini Spring Truck Street Carve & 12FIFTIES Bearings used to fit STICKIES Longboard Wheels to 9.525mm Axels (9.525 x 22.225 x 7.14mm) - CUSTOM

TRAMPA's STREET BOARDS (Carveboard & Longboard) use special R6-2RS Bearings to fit the STICKIES or other Longboard style wheels that then fit to the TRAMPA Mini Spring or TRAMPA's Extra wide 12FIFTIES Longboard Trucks.

To handle the extra forces a wider Axle may suffer (potentially fitting an electric motor will transform the forces even more so), we choose to increase the thickness of the Axle to a new Imperial size of 3/8ths of an inch, which translates in Metric measurement size of 9.525mm. So in order to fit regular Longboard wheels to the Mini Spring Trucks or the New TRAMPA Extra Wide Longboard Trucks you will need to squeeze in the special R6-2RS Bearings

Precision made R6-2RS TRAMPA Bearings are polished to an internationally recognised ABEC-7 quality. (ABEC 3-5 is recognised as the industry standard). ABEC 7 polishing gives you a super smooth & super fast ride, prolonging top end roll speeds for longer.... :-) Available with either RED, BLACK, WHITE or GREEN CERAMIC sidewalls, all of which are embossed with the TRAMPA logo to prove quality, the R6-2RS Bearings will squeeze to most regular sized Longboard wheels currently on the market.

R6 tells you the bearing standard size whilst 2RS means the bearing has 2 Removable Sidewalls. The Removable Rubber sidewalls 'seal the single row of lubricated ball bearings within the Chrome Steel housings, protecting them from the elements such as dust & moisture, maintaining maximum performance to the board & rider for as long as possible'. The rubber sealed sidewalls are easily removed so that you can service & clean your bearings on a regular basis, again maintaining high performance all of the times! 

These R6-2RS Si3N4 CERAMIC BEARINGS are our best offering yet! Using P4 Chrome Steel for both Inner & Outer Raceways & 7x Si3N4 CERAMIC Bearings mounted in a low friction Nylon cage, they will certainly enhance your ride ahead offering less resistance & therefore increased roll-ability compared to regular Steel bearings... 

Ceramic Bearings are famed for being less resistant steel bearings which is what makes them so spin fast.... Having less resistance enables Ceramic Bearings to roll faster & further from the same point when directly compared to Steel Bearings. If your using electric power on the back of your board, with Ceramic Bearings fitted all around then you will accelerate faster & your riding range will be bettered for sure.... 

Fitted with Removable 'Vibrant GREEN' sidewalls with the contrasting BLACK TRAMPA lettering, the Ceramic bearings are easy to clean & service whilst being bright Green the R6 2RS Bearings are easy identifiable as being the fastest, so if you in a race with a guy with Green Bearings, then watch out as he may already have the advantage over you if you don't...!

STICKIES Longboard & Street Carver Wheel Super High Rebound 83 x 52mm

TRAMPA's incredible range of STICKIES Longboard Wheels have taken the world of Longboarding by storm! Produced using the highest grade of Ultra Premium Urethane, and available in either 83 or 90mm size options with a varying range of suitably colour co-ordinatied Urethane Hardnesses, the variety compliments all the different types of rider, covering all the different aspects of street riding. You will be pleased to learn STICKIES Longboard Wheels will fit to ALL Longboard, Street-board & Skateboard Trucks using 8 or 9.525mm Axles.

The re-enforced VENTED CORE of the STICKIES Wheel houses a Center-set bearing position. For those that don't know this means the bearings are housed centrally within the wheel. Being center-set ensure an even wear rate to the wheel ensuring maximum grip at all times, whilst guaranteeing a balanced "high speed spin-rate", thus making turning/sliding as predictable as possible! Not only does the vented core reduce weight, but it also increases airflow around the Bearings ensuring lower operating temperatures when running at high speeds...

The Vented Core also has an extra application... The Venting holes can be used in conjunction with a centering ring & some M4x40mm Socket Capped Bolts to lock into position, either a 33 or 37 Tooth Slave Wheel, to which the complete assembly can be connected to many applications using an electric motor, including the new TRAMPA Electric Longboards & Electric Street-Carver boards as well as many other products due onto the market soon!

Smothering the Vented Core of the STICKIES Longboard wheel is thick PREMIUM URETHANE. Choosing STICKIES will enable you to Carve & Turn like you have only ever dreamed of before, especially when mounted to the new TRAMPA Mini Spring Trucks which happen to turn & carve like nothing else! STIKIES Wheels will also fit to the new 12FIFTIES Trucks and all 8mm Longboard trucks on the Market.

The edges of all the STICKIES wheels are beautifully rounded allowing smooth transitional turns, whilst helping to avoid chipping & cracks at the same time. The rounded edge of the STICKIES wheel gives an overall contact surface of 50mm! Orbiting the outer edge of the BLUE STICKIES WHEEL is a coordinating BLACK TRAMPA logo.

STICKIES will accept regular skate size 608 2RS (8 x 22 x 7mm) bearings & made special for the TRAMPA Mini Spring Trucks, the R6 2RS (9.525 x 22,225 x 7.14mm) Bearings. All of TRAMPA's Longboard/Streetboard bearings are ABEC 7-9 rated & are designed for prolonged high speed use. 

 

 

 

In this kit you get everything you need to convert the URBAN ORRSOM longboard to the STICKIES ORRSOM Longboard...

2x Custom Slave Pulley Wheel for 83mm & 90mm Longboard Wheels
2x Custom CENTERING RING
12x M4 x 40 Socket Cap Allen-Key Stainless Steel Bolt
2x 375x 15mm MIGHTY Belt - GUMMY ORRSOM Using 44 tooth Slave
4x 83 or 90mm Stickies Longboard Wheel
8x TRAMPA R6-2RS STICKIES Bearings x1 9.525mmm Axles
4x 9.525 x 13.525 x 10.3mm - Fits STICKIES Wheels on MINI Spring Trucks

Weight: 1,066g
HCC: 95069190
Which Size & Hardness STICKIES Wheels do you want?
Which Size & Hardness STICKIES Wheels do you want?

83mm BLUE - 74a Super Sticky
83mm BLUE - 74a Super Sticky

83mm BLACK - 76a Sticky
83mm BLACK - 76a Sticky

83mm WHITE - 78a Firm
83mm WHITE - 78a Firm

83mm RED - 81a Hardest
83mm RED - 81a Hardest

90mm BLUE - 74a Super Sticky (+£10)
90mm BLUE - 74a Super Sticky (+£10)

90mm BLACK - 76a Sticky (+£10)
90mm BLACK - 76a Sticky (+£10)

90mm WHITE - 78a Firm (+£10)
90mm WHITE - 78a Firm (+£10)

90mm RED - 81A Hardest (+£10)
90mm RED - 81A Hardest (+£10)

What colour Bearings do you want?
What colour Bearings do you want?

RED 9.525 x 22.225mm R6-2RS STICKIES Bearings x8
RED 9.525 x 22.225mm R6-2RS STICKIES Bearings x8

BLACK 9.525 x 22.225mm R6-2RS STICKIES Bearings x8
BLACK 9.525 x 22.225mm R6-2RS STICKIES Bearings x8

WHITE 9.525 x 22.225mm R6-2RS STICKIES Bearings x8
WHITE 9.525 x 22.225mm R6-2RS STICKIES Bearings x8

CERAMIC 9.525 x 22.225mm R6-2RS STICKIES Bearings x8 (+£25)
CERAMIC 9.525 x 22.225mm R6-2RS STICKIES Bearings x8 (+£25)

What size SLAVE PULLEY do you want?
What size SLAVE PULLEY do you want?

37 Tooth - Best Hill Climber
37 Tooth - Best Hill Climber

33 Tooth - Best Top Speed
33 Tooth - Best Top Speed

Quantity required:
We have enough parts to make…  
RRP £125 - for the complete set

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon