This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

TRAMPA 9 Inch Wheel

TRAMPA PHATLAD hub with 9 Inch Tyres Custom 9 inch Primo Wheel - Primo 3 Spoke composite Hub with 9 Inch Tyre OFF-SET MEGASTAR 9 Rims with 9 Inch Tyres - TRAMPA 9 Inch Wheel DEEP-DISH MEGASTAR 9 Rims with 9 Inch Tyres - TRAMPA 9 Inch Wheel PHATLADS - 5 Spoke Hub Deep Dish Split Rim hub fits 6,7,8,9 & 10 Inch tyres!! Amazing Custom 9 inch Tyre 9 Inch Re-enforced Inner Tube made by INNOVA - 225x65mm M4 x 45mm Socket Capped TORX Bolt - Marine Grade Stainless steel with locking paste M5 Nut - Marine Grade Stainless steel Nylock Nut - Fixes to Trucks & Bindings M4 x 50mm TORX Socket Capped Bolt - Marine Grade Stainless steel with locking paste
RRP FROM
£35+

How to put a wheel on an Infinity or Vertigo truck

How to put a wheel on an Ultimate Truck

M4 x 45mm Socket Capped TORX Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 45mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special Bolt is specifically made for TRAMPA & is used to assemble the TRAMPA PHATLADZ HUBS. The socket capped head of the Bolt screws neatly though the Spokes & into the fixing point in the Rim, eventually screwing  into the M4 nut on the other side easly.

Weighing just 3 grams each, they are very lightweight, look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

M4 x 50mm TORX Socket Capped Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 40mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special Bolt is specifically made for TRAMPA & is used to assemble the TRAMPA SUPERSTAR HUBS. The socket capped head of the Bolt screws neatly though the Spokes & into the fixing point in the Rim of the SUPERSTAR HUB eventually screwing  into the M4 nut on the other side easly.

Weighing just 3 grams each, they are very lightweight, look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

USED FOR: 
 
SUPERSTAR HUBS
MEGASTAR HUBS

M5 Nut - Marine Grade Stainless steel Nylock Nut - Fixes to Trucks & Bindings

Introducing TRAMPA's M5 (5mm Thread) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M5 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M5 Bolts that hold the TRUCKS to the DECK for all  Decks & also for the Dome Head Bolts connecting the L BRACKETS to the BindingsUse an 8mm spanner or Ratchet Drive to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

9 Inch Re-enforced Inner Tube made by INNOVA - 225x65mm

INNOVA's Re-enforced 9 Inch inner tube measures 225mm x 65mm and will fit into all the of the 9 inch Tyres on the TRAMPA website. This 9 Inch Inner Tube will also fit into the tyres of other brands. Being made from slightly thicker rubber, this Inner Tube is slightly heavier than alternatives but the Inner Tube will handle much higher than recommended inflation rates... Therefore this INNOVA inner tube is ideal for heavier or pro riders seeking high inflation pressures...

This INNOVA Inner tube will fit into all known 9 inch tyres as well as most ATB Hubs on the market & it comes as expected with a "Plastic Anti Dust" Valve cap!

Punctures Suck! Its always possible to get a puncture in the environments we ride in, so always carry a spare if you don't want your day spoiling...

PHATLADS - 5 Spoke Hub Deep Dish Split Rim hub fits 6,7,8,9 & 10 Inch tyres!! Amazing

TRAMPA's 5 Spoke PHATLADS hubs are DEEP-DISH (Extra wide), OFF-SET & the latest addition to fit into TRAMPA’s amazing range of small off road wheels.

Injection molded using premium Dupont plastic composites, PHATLADS Hubs utilize a special 2 parts split-rim design that can fit any 6, 7, 8 & even 10” tyre that TRAMPA offers – One hub to fit them all will transform your ride experience for sure!

Measuring 65mm wide the PHATLADS hubs are a half inch wider than regular 8 inch TRAMPA hubs & are known as ‘DEEP DISH’ due to the Angle of the spokes on the fatter half part, allowing the wider Rim width to sit in the same axle space as a norrower hub, consequentially giving an 'offset bearing position'. Increasing the Rim width increases the ground contact of any tyres fitted to them giving a low wide look when the 6, 7 & 8 inch tyres are fitted & the PHATLADS Hubs are the perfect 65mm width fit for the larger 9 & 10 inch tyres to get maximum surface contact (GRIP) in the muddiest of conditions when contact is needed most!

Currently only available in Natural Black & White with Black Logos the PHATLADS Weigh just 226g per hub (not including the Marine Grade Stainless Steel hardware used to hold them together & fit them to the Pulleys) TRAMPA's PHATLADS are the lightest choice of hub for 9” & 10” Tyres.

There are two sets of Bolt holes running around the perimeter of the PHATLADS Hubs, these are Inner & Outer positions! The Outer set of holes are for the assembly of the Hub & require the M4 nuts being inserted into the nut housings on the thinner of the 2 parts & once the 2 parts are mated together the Shorter M4x45mm bolt should be threaded through from the fatter side of the hub tightening into then nut with a T20 TORX Key. This M4 nut is submerged & the bolt should not sit proud of the surface of its housing. 

The Inner M4x50mm T20 TORX bolt holes of the PHATLADS hubs match the same screw pattern as any of the TRAMPA Slave pulleys suiting the 62 Tooth Slave Pulley when fitted with 6 inch tyres, the 66 tooth Slave Pulley when fitted with 8 inch Tyres & 76 Tooth Slave Pulley when fitting 9 Inch tyres.... Having 2 sets of Bolt holes allows the user to be able to remove the wheel from the assembly without deflating & disassembling the wheel, meaning they can HOT-SWAP their wheel. Being able to 'Hot Swap' your wheels without taking them apart saves you lots of time when it comes to creating different rider setups, after all a board with 6 inch wheels is completely different to a board with 9 inch 

It is possible to fit both the 6001-2RS & 16001-2RS Bearings into the bearing housing of these hubs, of course Bearing reducer sleeves can be used to reduce the bearings from 12mm to either 9.525mm (TRAMPA's Mini Spring Trucks & 12FIFTIES Trucks use 9.525mm Axles) or 10mm axles if your axle should be 10mm not the imperial 9.525mm TRAMPA uses. 

Soon to be available soon in a selection of colour co-ordinating options, TRAMPA's PHATLADS hubs will fit flawlessly to any of TRAMPA's  OPEN BELT DRIVEPRO BELT DRIVE & SPUR GEAR DRIVE Motor mount setups....

TRAMPA's 5 Spoke PHATLADS hubs are DEEP-DISH (Extra wide), OFF-SET & the latest addition to fit into TRAMPA’s amazing range of small off road wheels.

Injection molded using premium Dupont plastic composites, PHATLADS Hubs utilize a special 2 parts split-rim design that can fit any 6, 7, 8 & even 10” tyre that TRAMPA offers – One hub to fit them all will transform your ride experience for sure!

Measuring 65mm wide the PHATLADS hubs are a half inch wider than regular TRAMPA hubs & are known as ‘DEEP DISH’ due to the Angle of the spokes on the fatter half part, allowing the wider Rim width to sit in the same axle space as a norrower hub, consequentially giving an 'offset bearing position'. Increasing the Rim width increases the ground contact of any tyres fitted to them giving a low wide look when the 6, 7 & 8 inch tyres are fitted & the PHATLADS Hubs are the perfect 65mm width fit for the larger 9 & 10 inch tyres to get maximum surface contact (GRIP) in the muddiest of conditions when contact is needed most!

Currently only available in Natural Black & White with Black Logos the PHATLADS Weigh just 226g per hub (not including the Marine Grade Stainless Steel hardware used to hold them together & fit them to the Pulleys) TRAMPA's PHATLADS are the lightest choice of hub for 9” & 10” Tyres.

There are two sets of Bolt holes running around the perimeter of the PHATLADS Hubs, these are Inner & Outer positions! The Outer set of holes are for the assembly of the Hub & require the M4 nuts being inserted into the nut housings on the thinner of the 2 parts & once the 2 parts are mated together the Shorter M4x45mm bolt should be threaded through from the fatter side of the hub tightening into then nut with a T20 TORX Key. This M4 nut is submerged & the bolt should not sit proud of the surface of its housing. 

The Inner M4x50mm T20 TORX bolt holes of the PHATLADS hubs match the same screw pattern as any of the TRAMPA Slave pulleys suiting the 62 Tooth Slave Pulley when fitted with 6 inch tyres, the 66 tooth Slave Pulley when fitted with 8 inch Tyres & 76 Tooth Slave Pulley when fitting 9 Inch tyres.... Having 2 sets of Bolt holes allows the user to be able to remove the wheel from the assembly without deflating & disassembling the wheel, meaning they can HOT-SWAP their wheel. Being able to 'Hot Swap' your wheels without taking them apart saves you lots of time when it comes to creating different rider setups, after all a board with 6 inch wheels is completely different to a board with 9 inch 

It is possible to fit both the 6001-2RS & 16001-2RS Bearings into the bearing housing of these hubs, of course Bearing reducer sleeves can be used to reduce the bearings from 12mm to either 9.525mm (TRAMPA's Mini Spring Trucks & 12FIFTIES Trucks use 9.525mm Axles) or 10mm axles if your axle should be 10mm not the imperial 9.525mm TRAMPA uses. 

Soon to be available soon in a selection of colour co-ordinating options, TRAMPA's PHATLADS hubs will fit flawlessly to any of TRAMPA's  OPEN BELT DRIVEPRO BELT DRIVE & SPUR GEAR DRIVE Motor mount setups....

PLEASE BE AWARE, THIS IS A PHATLADS PART & WHEN PURCHASED DOES NOT INCLUDE NUTS OR BOLTS. 

Custom 9 inch Tyre

9” Wheels are a huge advantage when riding on challenging off-road terrain. The Larger circumference allows for a higher rolling speeds, while the extra width provides more grip.

9” PRIMO STRIKER TYRE’s design brief was styled towards fast riding on hard packed dirt surfaces. Made using a hard rubber compound with a Wide Center Bead to help achieve maximum rolling speeds. The close cut grip pattern around the sides of the tyre gives loads of grip on all kinds of changeable terrain. Using Harder Rubber makes the STRIKER Tyre very fast whilst hard-wearing.

9” INNOVA INLINE TYRE has a straight cut profile that make it the perfect grip option for easy rolling. Working best on hard surfaces, such as Skate parks, Tarmac or Asphalt. The 3mm deep INLINE grooved surface, encourages the tyre to "Track" in a straight line.

9" MUD PLUGGER TYRES are the perfect grip choice when the riding conditions turn bad & you need the maximum amount grip! The Mud-Plugger tyre has a wide center bead, giving good top end roll speed, but is also deeply grooved with aggressive Grip around its sides Mud-Pluggers works best in bad conditions!

9" DIAMOND TREAD TYRES are an amazing all-round choice for off-road riding. Hard compound rubber allows for fast rolling speeds, whilst the aggressive grip pattern provides amazing grip on both hard & soft dirt.

ALL 9” TYRES will fit TRAMPA’s PRIMO 3-SPOKE or 9” DEEPDISH MEGASTAR Hubs

Fits 76 Tooth Pulley for best gearing on Electric Boards - 

1x PHATLADS 5 Spoke Deep Dish Hub
1x Custom 9 inch Tyre -
1x 9 INCH Inner Tube - INNOVA
5x M4 x 45 Socket Cap TORX Bolt
5x M5 Nut - Marine Grade Stainless steel Nylock Nut
5x M4 x 50 Socket Cap TORX Bolt
Inflated Wheel Diameter 9in
Inflated Wheel Width 2.5in
Recommended Tyre Inflation 40-60psi
Weight: 800g
Which Hubs do you want for your 9 Inch Tyres to fit well
Which Hubs do you want for your 9 Inch Tyres to fit well

5 Spoke PHATLAD Hub with 9 Inch Tyre (£35)
5 Spoke PHATLAD Hub with 9 Inch Tyre  (£35)

3 Spoke PRIMO Hub with 9 Inch Tyre (£40)
3 Spoke PRIMO Hub with 9 Inch Tyre (£40)

OFF-SET MEGASTAR 9 Rims with 9 Inch Tyres (£75)
OFF-SET MEGASTAR 9 Rims with 9 Inch Tyres  (£75)

DEEP-DISH MEGASTAR 9 Rims with 9 Inch Tyres (£75)
DEEP-DISH MEGASTAR 9 Rims with 9 Inch Tyres  (£75)

What colour PHATLADS hub do you want?
What colour PHATLADS hub do you want?

Matt Black Naked PHATLADS hub please
Matt Black Naked PHATLADS hub please

BLUE Gloss BLACK Logo PHATLADS Hub (+£5)
BLUE Gloss BLACK Logo PHATLADS Hub (+£5)

GREEN Gloss BLACK Logo PHATLADS Hub (+£5)
GREEN Gloss BLACK Logo PHATLADS Hub (+£5)

PINK Gloss BLACK Logo PHATLADS Hub Hub (+£5)
PINK Gloss BLACK Logo PHATLADS Hub Hub (+£5)

PURPLE Gloss BLACK Logo PHATLADS Hub (+£5)
PURPLE Gloss BLACK Logo PHATLADS Hub (+£5)

RED Gloss BLACK Logo PHATLADS Hub (+£5)
RED Gloss BLACK Logo PHATLADS Hub (+£5)

WHITE Gloss & BLACK Logo PHATLADS Hub (+£5)
WHITE Gloss & BLACK Logo PHATLADS Hub (+£5)

YELLOW Gloss BLACK Logo PHATLADS Hub (+£5)
YELLOW Gloss BLACK Logo PHATLADS Hub (+£5)

Quantity required:
We have enough parts to make…  
RRP FROM £35 - per wheel

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon