This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

Original STREET Carver Motor Mount with Motor Axle Support & Pulley kit - TWIN

Original STREET Carver Motor Mount with Motor Axle Support & Pulley kit - TWIN Original STREET Carver Carbon Fibre Motor Mount PANEL with T6 Motor Mount CLAMP & GRUB Screws - TWIN UNIVERSAL Motor Axle Support for URBAN & STREET & 12FIFTIES Motor Mounts - CARBON STREET CARVER 33 or 37 Tooth Pulley Kit with 330mm Belt for STICKIES Wheels
RRP
£175
inc tax

TRAMPA’s amazing Carve Board drivetrains have been described as providing “A Whole New Riding Experience” – & that’s not wrong.
Suitable for STICKIESGUMMIES & URBAN TREAD wheels, TRAMPA’s completed Carve Boards feel & perform unlike anything else on the market.

The beauty of a Carve board is in the set up – or rather – how you set it up… One choice of parts creates a board capable of straight-line bombing at insane speeds. Another choice & it’s a board so buttery it can turn any corner on a dime.

CARVE DRIVETRAINS ARE AVAILABLE IN TWO MODELS:

ORIGINAL carve motor mounts use super strong 3k Twill Carbon Mounting panels & T6 Aluminium Truck Connectors to create a drive train with an amazing strength : weight ratio.
Different Carbon Mounting Panels are needed for mounting different wheels.

MKII carve motor mounts use an all-in-one TRUCK CONNECTOR & MOUNTING PANEL. CNC’d from a solid block of T6 Heat-treated Aluminium, the MkII Carver Motor Mount Connector Panel can withstand the knocks & pumps that come along when riding, while staying secure and aligned on the truck.

Carve board drivetrains are all available as Single or Twin Motor setups. Single motor boards are easier on the wallet, & will still hit the same eye-watering speeds as twin motors. Twin motors split the brunt of the work, so less chance of motors over-heating, & twice the grip - so if you’re looking for a board that’ll fly off the line, you’ve got to go twin!
Carve boards can fit any of the 118-160Kv 6364 DC Motors we offer. 118Kv Motors are the choice for particularly hilly areas, whereas 160Kv Motors will carry you to some insane speeds!

Being belt driven, the gear ratios can be fine tuned with a range of Motor & Slave pulleys.

Carve board drivetrains attach to MINI SPRING TRUCKS - TRAMPA’s most multifunctional steering system yet! Using offset axles, its possible to reverse the hangers - changing the wheelbase, ride-height and performance of the finished board – allowing different sized pulleys & wheels to be fitted.
12.5” wide with 9.525mm axles, available in;
INFINITY (817g).
VERTIGO (737g).
ULTIMATE (703g).

Longboard & Skateboard Bearings (8 x 22 x 7mm) Red Black Blue White or GREEN Ceramic sidewalls ABEC 7 608

TRAMPA's Longboard bearings will fit to all classic Longboard & Skateboard Wheels.

TRAMPA's Skate sized 608 Bearing (8 x 22 x 7mm) is internationally known as 608 2RS Longboard Bearing or Skateboard Bearing. It is the High Precision stock choice of bearing supplied with all TRAMPABOARDS that use 8mm Axles.

TRAMPA's 608 Skate Bearing has been polished to a an above genuine ABEC 7 quality rating & offers fantastic performance to the user. This Bearing will spin very fast for prolonged periods & it with regular servicing & a few drops of Speed Cream every now & then will last you a very long time. too. The internal Ball Bearings are mounted in a stainless steel raceway & are coated in very fine grease similar to the properties of Speed Cream.

As with all of TRAMPA's Bearings this Longboard Bearing has been fitted with Friction Free (contact-less) Removable Shields making servicing really easy. To Service your Bearings use a sharp knife or 'Pick' to carefully take out the Removable Sleeves from the bearing & clean/soak the bearings in a pot of Petrol or Thinners. Once clean, dry thoroughly & add a few drops of Speed Cream. A few drops is more than enough so don't go pouring loads in, the oil just needs spreading over all of the surfaces so pop them on the axle & give them a spin to spread the cream evenly & only add 1 more drop of Speed cream if necessary. Remember to wipe up any excess cream spinning out of your bearings onto your wheels as this will attract dust & dirt looking messy in turn.

& add a few drops of Speed Cream. A few drops is more than enough so don't go pouring loads in, the oil just needs spreading over all of the surfaces so pop them on the axle & give them a spin to spread the cream evenly & only add 1 more drop of Speed cream if necessary. Remember to wipe up any excess cream spinning out of your bearings onto your wheels as this will attract dust & dirt looking messy in turn.

M4 x 40mm Socket Capped Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 40mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special Bolt is specifically made for TRAMPA & is used to assemble the TRAMPA SUPERSTAR HUBS. The socket capped head of the Bolt screws neatly though the Spokes & into the fixing point in the Rim of the SUPERSTAR HUB eventually screwing  into the M4 nut on the other side easly.

Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

USED FOR CONNECTING:  

SUPERSTAR HUBS       
MEGASTAR HUBS       
PHATLADS HUBS

M4 x 4mm Grub Screw M4 x 4mm Motor Pulley Grub Screw - Connects the Motor Pulley onto the Motor Axle Shaft

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M8 x 16mm GRIPPY Grub Screw MGST Shape B with FLAT BALL - Connects Street Urban & Mountaniboard mounts to Hangers

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M4 x 16mm Socket Capped Head TORX Bolt ISO 4762 Marine Grade Stainless Steel

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

TORX M5 x 16mm Countersunk Bolt - Marine Grade Stainless steel with Fitting

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

330mm long x 15mm wide HTD 5M HP STRONGBELT for STREET CARVE Motor Mounts USING Street Carve Panel & 33 or 37 Tooth Slave

This is a 330mm long x 15mm wide High Torque Drive (HTD) Re-enforced Rubber Belt, which has 5mm Tooth Spacing (5M). It is a High Power rated (HP) TRANSMISSON BELT made by the world famous German Brand called STRONGBELT. This one is used to transfer the power from the Motor & Motor Pulley into power at the rear wheels of a TRAMPA Electric Street Carver

TRAMPA opted to set a new standard in E-Skating, becoming the first in the world to fit to all of its E-Boards in its range a 15mm wide TRANSMISSION BELT. Our standard 15mm belt is almost double the width of nearly all other E-Sk8's out there, they tend to use a flimsy off the shelf 9mm transmission belt which can be prone to stretch, slip & ultimately snap. Using a re-enforced 15mm wide High Power Belt reduces stretch, eliminates slip & as a consequence provides a constantly smooth whilst incredibly intuitive power delivery direct to the rear Drive Wheels of your board. When accelerating or engine breaking (KERS), even from a standing start the STRONGBELT power remains smooth & does not slip, or strain the motor, it does a damn gooood job!.....

STRONGBELT, as their name suggests, is a Heavy Industry Brand that usually supplies the likes of Train manufacturers where serious levels of quality with no excuses on failure are expected from the product, as failure for such an item is serious & may result in death! STRONGBELT weave KEVLAR into their Pulley Belts, Kevlar is one of the strongest fibers known to man, its often added into materials to gain extra strength.... STRONGBELT have the best reputation in the Power Transmission Industry for NO stretching or snapping & we have high expectations from this quality item. 

These extra quality details in the production of our electronic motor drives, provides the maximum responsiveness achievable whilst maintaining a super smooth power delivery to the rider at all times. 

STREET Carver Truck Carbon Fibre Motor mounting panel made from 3k Twill Carbon Fibre 5mm Thick - REGULAR

Made from 3k Twill Carbon Fibre then Laser cut to precision, this Street Carver Motor Mount Carbon Fibre Panel is made specifically to fit the TRAMPA 118Kv & 136Kv Motors but will also fit many other Brand motors which are similar sized (6364) to the TRAMPA Motors.

To Mount this LEFT foot forwards riding (REGULAR) Street Carver Carbon Motor Mount Panel to your Stret Carver Trucks you will need the Street Carver Truck Motor Mount connector, 2x very special ball ended Flat nosed M8x16mm Grub Srews which lock the Connector to the Hanger & 4x M5x16mm Countersunk Bolts to secure the Carbon Fiber panel to the motor mount connector. 

The Street Carver Truck is basically the same as the Urban Carve Truck, the only difference being that the Hanger is facing the oposite direction in assembly. so its possible for your Carver Truck to be BOTH STREET CARVER & URBAN CARVER However if you then wish to add electric motors, you will need different kits for the different Street or Urban boards as the shape of the Hanger is different according to its direction of mount...

QUESTION
I'm also wondering, will the motors from Ollin Board Company fit on any of your motor mounts?

ANSWER
I guess the Olin motors will fit to our Motor Mounts no problem, but you will not gain the full benefits of our equipment as the motor axle shaft in the TRAMPA Motors is much longer & so our Mount makes the most of the bearing assisted motor axle support system which supports the axle shaft preventing bent axle shafts, belt slip & wear and tear. Generally the Axle Shaft Support system gives a much better performance all round as it holds the belt in the perfect position, but arguably yes your motors will attach to our Carbon Fibre motor mounts....

STREET Carver Truck Carbon Fiber Motor mounting panel made from 3k Twill Carbon Fibre 5mm Thick - GOOFY

Made from 3k Twill Carbon Fibre then Laser cut to precision, this Street Carver Motor Mount Carbon Fibre Panel is made specifically to fit the TRAMPA 118Kv & 136Kv Motors but will also fit many other Brand motors which are similar sized (6364) to the TRAMPA Motors. To Mount this LEFT foot forwards riding (REGULAR) Street Carver Carbon Motor Mount Panel to your Stret Carver Trucks you will need the Street Carver Truck Motor Mount connector, 2x very special ball ended Flat nosed M8x16mm Grub Srews which lock the Connector to the Hanger & 4x M5x16mm Countersunk Bolts to secure the Carbon Fiber panel to the motor mount connector.  The Street Carver Truck is basically the same as the Urban Carve Truck, the only difference being that the Hanger is facing the oposite direction in assembly. so its possible for your Carver Truck to be BOTH STREET CARVER & URBAN CARVER However if you then wish to add electric motors, you will need different kits for the different Street or Urban boards as the shape of the Hanger is different according to its direction of mount... QUESTION I'm also wondering, will the motors from Ollin Board Company fit on any of your motor mounts? ANSWER I guess the Olin motors will fit to our Motor Mounts no problem, but you will not gain the full benefits of our equipment as the motor axle shaft in the TRAMPA Motors is much longer & so our Mount makes the most of the bearing assisted motor axle support system which supports the axle shaft preventing bent axle shafts, belt slip & wear and tear. Generally the Axle Shaft Support system gives a much better performance all round as it holds the belt in the perfect position, but arguably yes your motors will attach to our Carbon Fibre motor mounts....

Motor Axle Support for Spring Truck Motor Mounts UNIVERSAL

This part ensures your motor is supported and the belt is running straight - two very important jobs for a smooth, fast and reliable board.

Motors with longer axles, like TRAMPA’s own, will fit perfectly into the housed bearing within, supporting the axle rotation, ensuring there is no ‘give’ in the axle, where the belt could potentially slip off at high speeds.

Fitting onto Channel Truck Motor Mounts this Motor Axle Support will work with any of the 6-9inch tyres in the TRAMPA range.

Custom 15mm wide Motor Pulley 13, 14 or 15 tooth

TRAMPA's 15mm wide 13-15 Tooth Motor Pulleys connect directly to the Motor Axle & are secured into position using a Magnetic Fixing Key & 4mm Locking Grub Screw.

These custom made Motor Pulley Wheels  fit 15mm wide STRONGBELTS, which should never stretch or break whilst at the same time providing a very smooth power delivery to the user - even from a standing start.

Choice of Aluminium or Black Steel. Aluminium Pulleys are perfect for those looking to save every gram possible on their board - Black Steel Pullys are heavier, but much harder wearing.

Changing your Motor Pulley &/or Drive pulley wheels will drastically change the performance of your ride... :-)

13 Tooth
Best performance for climbing steep inclines.

14 Tooth 
Best all-round performance

15 Tooth 
Best performance forreaching top speeds.

The KEYWAY connects between the Motor Pulley & the Motor Axle Shaft to eliminate slip under power 3x3x8mm

TRAMPA's Motor Axle Shaft to Pulley KEYWAY measures 3 x 3 x 8mm. It connects into the Motor Pulley when mounted onto the motor Axle Shaft & is used to center the pulley on the Axle & to assist in delivering all the power from the motor without slip! This KEYWAY will fit to all TRAMPA motors amongst others.

TRAMPA's Axle length measures 38.5mm (from motor housing to end of shaft) & has a Diameter of 8mm. The centre of the key (3 x 3 x 8mm) sits 16.70mm away from the Motor front. Front side of Motor to Center of Key! Deduct 4mm & you have the length from front side of motor to the start of key....

Slave Wheel for TRAMPA 83mm & 90mm Longboard Wheels

TRAMPA's 33 Tooth Slave Wheel connects into all of TRAMPA's 83mm & 90mm Longboard Wheels perfectly! It connects through the Longboard Wheel using an Aluminum Centering Ring & M4 x 40mm Bolts with M4 M4 Nylock Nuts to lock it into position.

This custom made Slave Wheel can accept any size belt up to 17mm. TRAMPA uses's a German made 15mm wide STRONGBELT which provides a very smooth power delivery to the user, even from a standing start....

Changing your Motor Pulley &/or Slave pulley wheels will drastically change the performance characteristics of your ride... Small Pulleys at the Wheel Slows accelleration but increase's top the speed! :-)

Custom CENTERING RING

With the use of 6x Marine Grade Stainless Steel M4x40mm Socket Capped Bolts & 6x M4 Nylock Nuts, TRAMPA's Longboard Wheel Slave Wheel CENTERING RING, which is made from Solid Aluminum, connects through & around the spokes of the 83 or 90mm Longboard Wheels, locking the Slave Wheel solid in position into the wheel & ready to be connected to the HTD (High Torque Drive) Rubber STRONGBELT to give for some super smooth, high speed electric motor action!

TRAMPA's STREET CARVER DRIVE TRAIN (SCDT) brings a complete new sensation to riding. Arguably the Mini Spring Trucks are a too wide for Old-Skool conventional Longboarders who still wish to push, we have herd them complaining about the wheel is in the way when they push and the steering is too loose for them, you have to remember the Street Carver was originally designed for steep down hill street runs where 'switch back carving' is required not pushing... BUT assemble it with either a Single or dare i suggest the insane Twin motor setup & Hey! you don't need to push any more!

& WOW! - Fitting a motor to your TRAMPA Street carve deck completely & utterly transforms any previous riding experience you may have ever experienced before! The resulting E-Street Carver Decks are like nothing thats ever been made before. We know they are expensive but it is genuinly utterly amazing & a totally revolutionary sensation which should not ever be compared to a traditional Longboard...

The STREET & URBAN CARVE DECKS are very much the same... the only difference between the complete decks are the wheels & Slave Pulleys used & to make the change between the two decks in particular the Hanger is assembled in a different direction relevant to the size of the wheel... The Axle in the Hanger is 'off set' so turning it around forwards or backwards changes the wheel base accordingly. Hanger facing inwards gives shorter deck & is for Street Carving requiring smaller longboard style wheels, Whilst hanger facing forwards give Longer Wheelbase  for URBAN Carving as the extra size for space accommodates the larger wheels...

TRAMPA’s amazing Carve Board drivetrains have been described as providing “A Whole New Riding Experience” – & that’s not wrong.
Suitable for STICKIESGUMMIES & URBAN TREAD wheels, TRAMPA’s completed Carve Boards feel & perform unlike anything else on the market.

The beauty of a Carve board is in the set up – or rather – how you set it up… One choice of parts creates a board capable of straight-line bombing at insane speeds. Another choice & it’s a board so buttery it can turn any corner on a dime.

CARVE DRIVETRAINS ARE AVAILABLE IN TWO MODELS:

ORIGINAL carve motor mounts use super strong 3k Twill Carbon Mounting panels & T6 Aluminium Truck Connectors to create a drive train with an amazing strength : weight ratio.
Different Carbon Mounting Panels are needed for mounting different wheels.

MKII carve motor mounts use an all-in-one TRUCK CONNECTOR & MOUNTING PANEL. CNC’d from a solid block of T6 Heat-treated Aluminium, the MkII Carver Motor Mount Connector Panel can withstand the knocks & pumps that come along when riding, while staying secure and aligned on the truck.

Carve board drivetrains are all available as Single or Twin Motor setups. Single motor boards are easier on the wallet, & will still hit the same eye-watering speeds as twin motors. Twin motors split the brunt of the work, so less chance of motors over-heating, & twice the grip - so if you’re looking for a board that’ll fly off the line, you’ve got to go twin!
Carve boards can fit any of the 118-160Kv 6364 DC Motors we offer. 118Kv Motors are the choice for particularly hilly areas, whereas 160Kv Motors will carry you to some insane speeds!

Being belt driven, the gear ratios can be fine tuned with a range of Motor & Slave pulleys.

Carve board drivetrains attach to MINI SPRING TRUCKS - TRAMPA’s most multifunctional steering system yet! Using offset axles, its possible to reverse the hangers - changing the wheelbase, ride-height and performance of the finished board – allowing different sized pulleys & wheels to be fitted.
12.5” wide with 9.525mm axles, available in;
INFINITY (817g).
VERTIGO (737g).
ULTIMATE (703g).

IN THIS KIT YOU GET THE FOLLOWING PARTS -
2x Mini Spring Truck connecting Clamps - Street Carver
4x M8x Marine Grade Stainless Steel Grub Screws
1x Regular Carbon Fibre Motor Mount Panel for TWIN Motor
1x Goofy Carbon Fibre Motor Mount Panel for TWIN Motor
8x Marine Grade Stainless Steel Countersunk TORX Bolt
2x TRAMPA abec 7 608 or Si4n5 Ceramic Longboard & Skateboard Bearings
2x Motor Axle Support for Spring Truck Motor Mounts UNIVERSAL
6x M4 x 16mm Socket Capped TORX Bolt - Marine Grade Stainless Steel
2x 20mm Steel Motor pulley Custom option 13, 14 or 15 Tooth
2x M4 x4mm Hardened BLACK Steel Grub Screw - Locks Motor Pinion on Axel
2x Motor Pulley M3 x3 x12mm Keyway for 2mm Pulley
2x 33 or 37 Tooth Slave Pulley for Longboards & Street Carver
2x Centering Ring for 33 or 36 tooth Longboard Wheels
12x Centring Ring to Longboard Slave pulley Fixing Bolts
2x 330 x 15mm Belt - Street Carve (using Street Motor Mount panel)
Weight: 601g
What size Motor Pulley you would like?
What size Motor Pulley you would like?

13 Tooth 15mm wide ALUMINIUM Motor Pulley - BEST Hill Climber
13 Tooth 15mm wide ALUMINIUM Motor Pulley - BEST Hill Climber

14 Tooth 15mm wide ALUMINIUM Motor Pulley - BEST All Round
14 Tooth 15mm wide ALUMINIUM Motor Pulley - BEST All Round

15 Tooth 15mm wide ALUMINIUM Motor Pulley - BEST Top Speed
15 Tooth 15mm wide ALUMINIUM Motor Pulley - BEST Top Speed

13 Tooth 15mm wide BLACK STEEL Motor Pulley - BEST Hill Climber
13 Tooth 15mm wide BLACK STEEL Motor Pulley - BEST Hill Climber

14 Tooth 15mm wide BLACK STEEL Motor Pulley - BEST All Round
14 Tooth 15mm wide BLACK STEEL Motor Pulley - BEST All Round

15 Tooth 15mm wide BLACK STEEL Motor Pulley - BEST Top Speed
15 Tooth 15mm wide BLACK STEEL Motor Pulley - BEST Top Speed

What size SLAVE PULLEY do you want?
What size SLAVE PULLEY do you want?

37 Tooth - Best Hill Climber
37 Tooth - Best Hill Climber

33 Tooth - Best Top Speed
33 Tooth - Best Top Speed

Quantity required:
We have enough parts to make…  
RRP £175 - for the complete set

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon