This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

Original STREET Carver Carbon Fibre Motor Mount PANEL with T6 Motor Mount CLAMP & GRUB Screws - SINGLE

Original STREET Carver Carbon Fibre Motor Mount PANEL with T6 Motor Mount CLAMP & GRUB Screws - SINGLE Street Carver Original Truck Motor mounting panel Connector - T6 Aluminum CNC'd to fit Regular or Goofy Motor mount Panels    M8 x 16mm GRIPPY Grub Screw MGST Shape B with FLAT BALL - Connects Street Urban & Mountaniboard mounts to Hangers TORX M5 x 16mm Countersunk Bolt - Marine Grade Stainless steel with Fitting STREET Carver Truck Original Carbon Fiber Motor mounting panel made from 3k Twill Carbon Fibre 5mm Thick
RRP
£50
inc tax

TRAMPA’s amazing Carve Board drivetrains have been described as providing “A Whole New Riding Experience” – & that’s not wrong.
Suitable for STICKIESGUMMIES & URBAN TREAD wheels, TRAMPA’s completed Carve Boards feel & perform unlike anything else on the market.

The beauty of a Carve board is in the set up – or rather – how you set it up… One choice of parts creates a board capable of straight-line bombing at insane speeds. Another choice & it’s a board so buttery it can turn any corner on a dime.

CARVE DRIVETRAINS ARE AVAILABLE IN TWO MODELS:

ORIGINAL carve motor mounts use super strong 3k Twill Carbon Mounting panels & T6 Aluminium Truck Connectors to create a drive train with an amazing strength : weight ratio.
Different Carbon Mounting Panels are needed for mounting different wheels.

MKII carve motor mounts use an all-in-one TRUCK CONNECTOR & MOUNTING PANEL. CNC’d from a solid block of T6 Heat-treated Aluminium, the MkII Carver Motor Mount Connector Panel can withstand the knocks & pumps that come along when riding, while staying secure and aligned on the truck.

Carve board drivetrains are all available as Single or Twin Motor setups. Single motor boards are easier on the wallet, & will still hit the same eye-watering speeds as twin motors. Twin motors split the brunt of the work, so less chance of motors over-heating, & twice the grip - so if you’re looking for a board that’ll fly off the line, you’ve got to go twin!
Carve boards can fit any of the 118-160Kv 6364 DC Motors we offer. 118Kv Motors are the choice for particularly hilly areas, whereas 160Kv Motors will carry you to some insane speeds!

Being belt driven, the gear ratios can be fine tuned with a range of Motor & Slave pulleys.

Carve board drivetrains attach to MINI SPRING TRUCKS - TRAMPA’s most multifunctional steering system yet! Using offset axles, its possible to reverse the hangers - changing the wheelbase, ride-height and performance of the finished board – allowing different sized pulleys & wheels to be fitted.
12.5” wide with 9.525mm axles, available in;
INFINITY (817g).
VERTIGO (737g).
ULTIMATE (703g).

M8 x 16mm GRIPPY Grub Screw MGST Shape B with FLAT BALL - Connects Street Urban & Mountaniboard mounts to Hangers

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

TORX M5 x 16mm Countersunk Bolt - Marine Grade Stainless steel with Fitting

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

STREET Carver Truck Original Carbon Fiber Motor mounting panel made from 3k Twill Carbon Fibre 5mm Thick

Made from 3k Twill Carbon Fibre then Laser cut to precision, this Original Street Carver Motor Mount Panel is made specifically to fit TRAMPA's range of 6364 Motors. (but will also fit many other branded motors that are similarly sized.)

To Mount this Street Carver Carbon Motor Mount Panel to your Stret Carver Trucks you will need the Original Street Carver Truck Motor Mount connector, 2x special ball-ended flat nose M8x16mm Grub Srews (to lock the Connector to the Truck Hanger) & 4x M5x16mm Countersunk Bolts to secure the Carbon Fiber panel to the motor mount connector. 

Available for Regular or Goofy Riders.

TRAMPA's STREET CARVER DRIVE TRAIN (SCDT) brings a complete new sensation to riding. Arguably the Mini Spring Trucks are a too wide for Old-Skool conventional Longboarders who still wish to push, we have herd them complaining about the wheel is in the way when they push and the steering is too loose for them, you have to remember the Street Carver was originally designed for steep down hill street runs where 'switch back carving' is required not pushing... BUT assemble it with either a Single or dare i suggest the insane Twin motor setup & Hey! you don't need to push any more!

& WOW! - Fitting a motor to your TRAMPA Street carve deck completely & utterly transforms any previous riding experience you may have ever experienced before! The resulting E-Street Carver Decks are like nothing thats ever been made before. We know they are expensive but it is genuinly utterly amazing & a totally revolutionary sensation which should not ever be compared to a traditional Longboard...

The STREET & URBAN CARVE DECKS are very much the same... the only difference between the complete decks are the wheels & Slave Pulleys used & to make the change between the two decks in particular the Hanger is assembled in a different direction relevant to the size of the wheel... The Axle in the Hanger is 'off set' so turning it around forwards or backwards changes the wheel base accordingly. Hanger facing inwards gives shorter deck & is for Street Carving requiring smaller longboard style wheels, Whilst hanger facing forwards give Longer Wheelbase  for URBAN Carving as the extra size for space accommodates the larger wheels...

TRAMPA’s amazing Carve Board drivetrains have been described as providing “A Whole New Riding Experience” – & that’s not wrong.
Suitable for STICKIESGUMMIES & URBAN TREAD wheels, TRAMPA’s completed Carve Boards feel & perform unlike anything else on the market.

The beauty of a Carve board is in the set up – or rather – how you set it up… One choice of parts creates a board capable of straight-line bombing at insane speeds. Another choice & it’s a board so buttery it can turn any corner on a dime.

CARVE DRIVETRAINS ARE AVAILABLE IN TWO MODELS:

ORIGINAL carve motor mounts use super strong 3k Twill Carbon Mounting panels & T6 Aluminium Truck Connectors to create a drive train with an amazing strength : weight ratio.
Different Carbon Mounting Panels are needed for mounting different wheels.

MKII carve motor mounts use an all-in-one TRUCK CONNECTOR & MOUNTING PANEL. CNC’d from a solid block of T6 Heat-treated Aluminium, the MkII Carver Motor Mount Connector Panel can withstand the knocks & pumps that come along when riding, while staying secure and aligned on the truck.

Carve board drivetrains are all available as Single or Twin Motor setups. Single motor boards are easier on the wallet, & will still hit the same eye-watering speeds as twin motors. Twin motors split the brunt of the work, so less chance of motors over-heating, & twice the grip - so if you’re looking for a board that’ll fly off the line, you’ve got to go twin!
Carve boards can fit any of the 118-160Kv 6364 DC Motors we offer. 118Kv Motors are the choice for particularly hilly areas, whereas 160Kv Motors will carry you to some insane speeds!

Being belt driven, the gear ratios can be fine tuned with a range of Motor & Slave pulleys.

Carve board drivetrains attach to MINI SPRING TRUCKS - TRAMPA’s most multifunctional steering system yet! Using offset axles, its possible to reverse the hangers - changing the wheelbase, ride-height and performance of the finished board – allowing different sized pulleys & wheels to be fitted.
12.5” wide with 9.525mm axles, available in;
INFINITY (817g).
VERTIGO (737g).
ULTIMATE (703g).

IN THIS KIT YOU GET THE FOLLOWING PARTS -
1x Mini Spring Truck connecting Clamp - Street Carver
2x M8x Marine Grade Stainless Steel Grub Screws
4x Marine Grade Stainless Steel Countersunk TORX Bolt
1x Precision CNC'd Carbon Fibre Motor Mount Panel Regular or Goofy
Weight: 132g
Are you left or Right Foot Forwards rider?? Regular or Goofy??
Are you left or Right Foot Forwards rider?? Regular or Goofy??

LEFT Leg Forwards Rider - REGULAR Stance
LEFT Leg Forwards Rider - REGULAR Stance

RIGHT Leg Forwards Rider - GOOFY Stance
RIGHT Leg Forwards Rider - GOOFY Stance

Quantity required:
We have enough parts to make…  
RRP £50 - for the complete set

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon