Home»Accessories»WHEELS Accessories & TYRE kits»Tyre & Tubes Sets of 4»8 Inch Tyres Set of 4 »8 Inch Tires Set of 4 - INNOVA INLINE

INNOVA INLINE 8 Inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs - GREY

INNOVA's 8 Inch INLINE TYRE is an off the shelf "Old Skool Classic". Its 'Straight cut' tread & ballon shaped sidewalls suggest this tyre is the perfect option for easy rolling.

Measuring 8x 2 Inches or 200 x 50mm when inflated, INNOVA's 8 Inch INLINE Tyre will fit to all of the TRAMPA Hubs that measure 3.75 or 3.75/4 Inches at the Rim. The factory's recommended max tyre pressure is 50psi but the TRAMPA hubs are so strong that top riders have been known to inflate these tyres well beyond their recommended pressures with no problems to mention. If you do decide to go beyond the max inflation pressure ensure your nuts & bolts holding the hub together are adequately tight & deflate to a regular pressure after use. We recommend you should look to inflate these tyres to somewhere between 30 & 45 psi for optimal use.The 3mm deep INLINE grooved surface, encourages the tyre to "Track" in a straight line & unlike the Long Board sized / style wheels, the 8 inch pneumatic rubber tyre is plenty big enough to not even feel small cracks or obstacles you might encounter on the street when riding on longboard wheels, with no problem at all....!

A 3.75 Inch Steel Band is moulded into the Rim of the INLINE Tyre to give structure whilst a regular TPI (TPI = Threads per Inch) gives the tyre its stiff structure when stitching the Steel Bands together. Slightly heavier than other tyres we offer the INLINE tyre is "4PR" rated. PR means "Ply Rating" & refers to the number of layers of rubber. so this tyre has 4 Layers of rubber smothering the regular threaded surface. Some tyres in the TRAMPA range are 2PR, so having 4PR means its double thickness & therefore heavier as consequence but also longer lasting & arguably more resistant to punctures.

Measuring 3.75 inch at the rim, the 8 Inch INLINE Tyre will fit to all the 3.75 inch Rim hubs, which will in turn fit to several different sized Slave Pulleys that TRAMPA uses in its Drive trains. Connecting a 66 Tooth pulley to an 8 Inch tyre/wheel will give you the best all round hamonised performance. Fitting a 76 Tooth Pulley to a 8 Inch Tyre/wheel (Only connects to 5 spoke wheels) will increase the Torque & acceleration but reduce your top speed, this is a great combination if you are perhaps riding on a pump track or if you do a lot of up hill riding, or if your a particularly heavy rider needing a bit more gearing. Fitting a 62 Tooth Pulley to a 8 inch Tyre/wheel will reduce acceleration but increase the top speed. If you are a light weight rider this combination could work very well for you. 

Its true, the more you inflate your Tyres the faster you will roll! It also true that if you inflate your tyres too high or too low you will also see excessive wear on your tyres much faster. The official maximum inflation pressure set by the factory for the INLINE Tread 8 Inch Tyre is 50psi, but the INLINE Tyres are made so well (By Innova) & the TRAMPA Hubs are so strong (The tyres are only as strong as the hubs they are fitted too & our hubs are incredibly strong) that our Crash test Dummies (I mean Team Riders) have been known to inflate these Tyres well beyond their recommended pressures with no problems to mention. Its also true that over inflating your tyres may lead to an explosion which could seriously injure you, so use a pressure gauge if your going to inflate them high so you don't go too far. If you do decide to go beyond the max inflation pressure ensure your nuts & bolts are tight before inflation & once your done riding at the high pressure deflate them back down to a regular pressure to rest.