This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

VERTIGO Hanger MINI - 9.525mm HOLLOW Axles

VERTIGO Hanger MINI - 9.525mm HOLLOW Axles MINI VERTIGO Hanger - 9.525mm HOLLOW steel Axles Black Anodised & CNC'd light Shim spacer - STAINLESS STEEL - Bridges tiny gaps on axles - 9.525 x 13.525 x 1mm 3/8ths Nut - Marine Grade Stainless steel Nylock HALF nut W3/8 - 24T UNF
RRP
£57.50
exc tax

The VERTIGO BRAKE / E-DRIVE HANGER is a slimmed down light weight version of the Infinity Brake / E-Drive Hanger. To ensure the maximum strength possible the Hanger body is made from FORGED ALUMINUM & comes to us as one solid piece!

The VERTIGO BRAKE / E-DRIVE HANGER is CNC miilled to cut out the bulk of the weight whilst retaining the majority of its strength & allowing the Magura brakes or the new TRAMPA E-DRIVE gearing system to be mounted. The VERTIGO Hanger is fitted with 12mm HOLLOW STEEL Axles. The Axles are HEAT TREATED. Heat treating steel makes it substantially stronger & more resistant to impact. Hollow Steel Axles are substantially lighter than than Solid steel Axles.

CNC milling guarantees precision work. Ensuring the Kingpin Holes are accurately placed guarantee's the best performance to the rider as well as making the truck easy to assembly & service.  Whilst the Hanger is at the CNC factory, the workers modify the back of the hanger by milling a flat surface (so we can mount the equipment flush against the hanger) and then drilling an extra hole & inserting a thread for fixing. A small cradle is drilled at the top of the hanger to elliminate movement. We are able to fix the MAGURA Braking system or the NEW TRAMPA E-DRIVE sytem into this thread & cradle, making a very strong fix between the two. Your braking system very very powerful indeed, it needs a strong mounting point.. In order to give the "Two Tone Pimp Finish" the Infinity Hanger is EDP painted MATT BLACK for metal protection & colour coordinating good looks before the CNC work is carried out.

The VERTIGO Brake Board Hanger measures 16 Inches in total width. When the wheels are fitted to the Hanger, the board has a "center wheel width" of 14 Inches.

MINI VERTIGO Hanger - 9.525mm HOLLOW steel Axles Black Anodised & CNC'd light

The Mini VERTIGO Hanger measures 12.5 Inches in total width & it fits to all TRAMPA Spring Truck Baseplates. Being narrower in the body & fitted with shorter axles than regular ATB Hangers means the overall steering characteristics are completely different. The Hanger has the usual Spring Adjuster facility but is also drilled with 2 spring mounting positions & by changing the spring positions in the truck (inside or outside position) or by adding/removing some TRAMPA DAMPA's into/from the springs means the Mini VERTIGO Hanger has an incredibly broad range of controllable steering which can be used for so many different applications its simply ace!

We have just released a full range of STREET CARVER BOARDS which all use the Mini Hangers. & amongst other applications the Mini Hangers will be used to make a Kids "Spring Truck" Mountainboard which will bring massive riding advantages to the younger/smaller riders...

The VERTIGO hanger body is made from FORGED ALUMINUM & comes as one solid piece. It is fitted with 9.525mm (10mm) HOLLOW STEEL Axles. The Hollow Axles are HEAT TREATED. Heat treating steel makes it substantially stronger & less likely to rust. The Mini VERTIGO Hanger is a slimmed down light weight version of the Mini INFINITY Hanger. The CNC machine is used to accurately drill the excess bulk from the centre of the truck reducing weight whilst retasining all the molecular strength it originally had  and to ensure a neat job of the Kingpin Holes. This CNC work is expensive stuff but well worth the cost as it saves loads of weight! & Ensuring the Kingpin Holes are accurately placed guarantee's peak performance to the rider as well as making the truck easy to assembly & service. The Mini VERTIGO Hanger is BLACK ANODISED for best surface protection before the CNC work is carried out , which consequently leaves an awesome two-tone pimped polished appearance amongst the details of the product :-)

Mini Vertigo Truck Hangers are used in BOTH the STREET Carver Trucks & the amazing URBAN Carver Trucks. The only difference between the Street & Urban Carver Trucks is the facing direction of the hanger, by turning the hanger around during assembly allow's the different style of Truck...  Axle facing forwards for Urban, Axle facing backwards for Street.

We turn the Hanger around because the axle position is not centrally located in the Hanger and so by facing the axle forwards away from the toe's,  extends the wheel base whilst at the same time lowers the ride height of the deck (You have to remember the truck is mounted at a 35º), making the resulting Truck & Deck combination wheel base more suitable for mounting a larger wheel, HENCE why the URBAN CARVER Truck uses the 7 inch pneumatic wheels.

Equally, Where as when the hanger is reversed & the Axle is facing towards the riders toe's, the wheel base is shortened & of course the deck height is subsequently raised slightly, co-incidentally to a perfect height to fit much smaller style of wheel & you guessed hence why the Street Carver Deck uses the 83mm or 90mm Longboard wheels.... :-)

3/8ths Nut - Marine Grade Stainless steel Nylock HALF nut W3/8 - 24T UNF

This very special Marine Grade Stainless steel Nyloc HALF NUT is custom made specially to fit the TRAMPA products. Half nut means - half as the size of a regular nut, so half the size = half the weight of a normal nut. By using Half nuts on the axles reduces the over all length of the axle & kingpin therefore reducing weight in the Truck also! A few Grams here & a few grams there soon adds up to quite alot & that makes all the difference to the total Truck & consequently deck weight, specially in critical areas of the deck such as the wheels area...

This very special 3/8ths of an inch Marine Grade Stainless steel Nylock Half Nut official factory measurements are  W3/8ths - 24T - UNF. This Nut is used to hold the wheels onto the axles of the 9.525mm (3/8ths of Inch or otherwise referred to as 10mm) SKATE TRUCKS & also the Spring Trucks fitted with TITANIUM axles. This Nut is also used to hold the KINGPIN in position on all Skate Trucks. The Nut is fitted as standard with the world renowned NYLOC System. The Nyloc "locks the Nut onto the Bolt" eliminating vibration, keeping your nuts tighter for longer!

Use a 14mm or 9/16ths of an Inch spanner to tighten the Nut onto the Axle or Kingpin, do not overtighten the nut, allow the wheel to spin freely but not rattle & do not crush your bearings. Being Marine Grade Stainless Steel this nut will not rust you! Always ensure all ur nuts are tight before you ride!

 - Fits to 9.525mm (3/8ths) Axles & Skate Truck Kingpins

Shim spacer - STAINLESS STEEL - Bridges tiny gaps on axles - 9.525 x 13.525 x 1mm

This tiny STEEL Shim Spacer is precision made to give maximum performance! It is used to hold the bearings in the perfect position & also to bridge tiny gaps on the axles, ensuring an accurate fit with NO rattles!

The Shim spacer slips onto the axle fitting either side of the Bearings when the wheel is being fitted onto 9.525mm Axles.

This tiny spacer positions the wheel perfectly on the axle, holding the Bearing in the best possible place to help achieve maximum spin rate for the wheel. Its little parts like these that suffer the most amount of abuse, especially when they are used in the harsh conditions that they are. Check from time to time they are in good order & possibly replacing them every now & then this good proactice will ensure your board stays in tip-top condition, always!

The TRAMPA ULTIMATE hanger has been designed for riders who want the best. The TRAMPA ULTIMATE hanger is ultra high spec and as a result very lightweight. It's renowned for its high level of precision, strength, reliabillity and durability.

It's claimed the TRAMPA ULTIMATE hanger is the worlds strongest and lightest spring truck hanger on the market! We think its by far the best! It fits to both the Infinity and Vertigo base plates. The TRAMPA ULTIMATE hangers are CNC precision drilled for easy and accurate assembly, resulting in super smooth and optimum steering to the rider. The precision CNC machining also removes all excess material to save every gram of weight possible..

The TRAMPA ULTIMATE hanger comes fitted as standard with top quality 7/16ths solid TITANIUM axles. The 7/16ths TITANIUM axles will fit to all Trampa hubs and wheels by using the 7/16ths or 10mm skate truck sized Trampa Bearings.


The VERTIGO BRAKE / E-DRIVE HANGER is a slimmed down light weight version of the Infinity Brake / E-Drive Hanger. To ensure the maximum strength possible the Hanger body is made from FORGED ALUMINUM & comes to us as one solid piece!

The VERTIGO BRAKE / E-DRIVE HANGER is CNC miilled to cut out the bulk of the weight whilst retaining the majority of its strength & allowing the Magura brakes or the new TRAMPA E-DRIVE gearing system to be mounted. The VERTIGO Hanger is fitted with 12mm HOLLOW STEEL Axles. The Axles are HEAT TREATED. Heat treating steel makes it substantially stronger & more resistant to impact. Hollow Steel Axles are substantially lighter than than Solid steel Axles.

CNC milling guarantees precision work. Ensuring the Kingpin Holes are accurately placed guarantee's the best performance to the rider as well as making the truck easy to assembly & service.  Whilst the Hanger is at the CNC factory, the workers modify the back of the hanger by milling a flat surface (so we can mount the equipment flush against the hanger) and then drilling an extra hole & inserting a thread for fixing. A small cradle is drilled at the top of the hanger to elliminate movement. We are able to fix the MAGURA Braking system or the NEW TRAMPA E-DRIVE sytem into this thread & cradle, making a very strong fix between the two. Your braking system is very powerful, it needs a good strong mounting point for max performance.. In order to give the "Two Tone Pimp Finish" the VERTIGO Brake / E-Drive Hanger is Anodised  GLOSS BLACK for metal protection & colour coordinating good looks before the CNC work is done.

The VERTIGO Brake Board / E-Drive Hanger measures 16 Inches in total width. When the wheels are fitted to the Hanger, the board has a "center wheel width" of 15 Inches.

1x MINI VERTIGO Hanger - 9.525mm HOLLOW steel axle
2x 9.525 x 13.525 x 1mm - Shim Spacer - ensures exact fitt & fast running bearings!
2x 3/8ths Inch Axle Nut - Marine Grade Stainless steel Nylock HALF nut
VERTIGO Brake / E-Drive Hanger
Weight: 369g
Quantity required:
RRP £57.50 - each

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon