Home»WHEELS HUBS TYRES & BEARINGS»Hubs»SUPERSTAR 8's CENTER-SET Hubs 3.75 x 2 Inch»SUPERSTAR Hub 3.75 x 2 Inch - Green Rim with Black spokes

TRAMPA's SUPERSTAR HUB is a technically designed, super-strength masterpiece, created for those who insist on installing only the best of equipment!

The Split Rim of the SUPERSTAR hub has been manufactured using original Du-Pont materials & the very latest in precision injection moulding machinary (only the best will do!), whilst the Extruded Aluminum Spokes are T6 Heat-treated (T6 heat treating makes the extruded aluminum exceptionally strong), Anodised & finally CNC precision milled to fit the Trampa Bearings perfectly. 

Separated & supported by a chunky nylon Spoke support spacer, the T6 Heat-treated spokes simply push into the rim during assembly. The SUPERSTARS split rim construction is held together with Marine Grade (A4) Stainless steel fixings. The M4x40mm Bolts have all been brushed with Blue locking paste & all the Nuts have a Nylock sleeve to ensure double quality & a totally secure fixing!  A 3mm Alan Key & a 7mm spanner are all the tools you need to construct or service your hubs. This incredible top quality combination makes all the difference to the end user compared to what the competition produce as the SUPERSTAR hub is easy to service & will not fail on you

The SUPERSTAR hub is available in loads of different surface finishes & different coloured spoke combinations, its difficult to choose your favorite, but you can have your SUPERSTAR hubs in any combination you like...

Trampa’s own top quality steel steel bearings are genuine ABEC 5 rated & fit perfectly into the CNC precision milled spokes, enabling the hub the fastest spin rate possible. When purchasing bearings with the hubs the bearings can be purchased for as little as £1.25 each making a £5 saving per set of 8.

Along with many other wheeled applications, the SUPERSTAR hub will fit to ALL other brands of mountainboards on the market including MBS SCRUB & KHEO. Basically the SUPERSTAR wheels will fit to anything with a 9.52mm (imperial), 10mm or 12mm axle. There are conversion spacers available for you to convert your existing 12mm bearings to work on 9.55mm skate axles (7/16ths Imperial) or 10mm (metric) scooter axles (see associated parts for details).

Due to the fantastic design & the use of top quality materials in these hubs, the finished product has ended up being exceptionally strong. This extra strength allows the rider to inflate their tyres well beyond normal recommended pressures, which in turn increases the top end roll speeds. We shouldn’t go recommending that you go over inflating your tires but if you are ever going to do it you will be safe in the knowledge that these hubs can handle the pressure that other hubs cant. During testing it was common for our Crash Test Dummis (I mean TRAMPA Team riders) to inflate as high as 100psi, and in some cases (Joel!) well beyond!!

This Text to be Checked!!
The SUPERSTAR hub is a beautiful & technically designed masterpiece, created for those who insist on fitting only the finest of equipment.

The outer rim of the SUPERSTAR hub is Injection Moulded using Original DuPont plastics (the best!) whilst the Extruded Aluminum spokes are T6 Heat-treated (T6 heat treating makes the extruded aluminum exceptionally strong), Anodised & finally CNC precision milled to fit the Trampa Bearings fit perfectly. 

Separated by a Chunky Nylon spacer, the spokes simply push into the rim during construction. This construction is held together using Marine Grade Stainless steel fixings. This incredible top quality combination makes all the difference compared to the competition as the SUPERSTAR hub can handle incredibly high inflation pressures & is what we believe to be the best 8 Inch hub on the market today!

The SUPERSTAR hub is available in loads of different surface finishes & different coloured spoke combinations, its difficult to choose your favorite, but you can have your SUPERSTAR hubs in any combination you like...

Constructed (as expected from TRAMPA) using only the finest fixings available. All TRAMPA parts including these hubs are constructed using Marine grade Stainless steel that have all been brushed with Blue bolt lock paste to ensure the most secure of fixings. All nuts used also have a Nylock sleeve to ensure double quality & effective secure fixing! A 3mm Alan Key & a 7mm spanner are all the tools you need to construct or service your hubs.

Trampa’s own Bearings (genuine ABEC 5 Bearings) fit perfectly into the spokes allowing the hub the fastest spin rate available. When purchasing bearings with the hubs the bearings can be purchased for as little as £1.25 each...

Along with many other applications, the SUPERSTAR hub will fit to ALL other brands of trucks on the market including MBS and Scrub, they will fit to anything with a 12mm axle. There are conversion spacers available to convert 12mm bearings to work on 9.55mm skate axles (7/16ths Imperial) or 10mm (metric) scooter axles (see associated parts for details).

Due to the fantastic design & the use of top quality materials in these hubs the finished product has ended up being exceptionally strong. This extra strength allows the rider to inflate their tyres well beyond normal recommended pressures, which in turn increases the top end roll speeds. We shouldn’t go recommending that you go over inflating your tires but if you are ever going to do it you will be safe in the knowledge that these hubs can handle the pressure that other hubs cant. During testing it was common for Trampa Team riders to inflate as high as 100psi, and beyond!!

The SUPERSTAR hub is a beautiful & technically designed masterpiece, created for those who insist on fitting only the finest of equipment. The outer rim of the SUPERSTAR hub is Injection Moulded using Original Du Pont plastics (the best!) whilst the Extruded Aluminum spokes are T6 Heat-treated (T6 heat treating makes the extruded aluminum exceptionally strong), Anodised & finally CNC precision milled to accept the Trampa Bearings to fit perfectly.  Separated by a Chunky Nylon spacer, the spokes simply push into the rim during construction. This split rim construction is held together using Marine Grade Stainless steel fixings. This incredible top quality combination makes all the difference to the user compared to the competition as the SUPERSTAR hub will not fail on you & it can handle incredibly high inflation pressures.... It is what we believe to be the best 8 Inch hub on the market today! The SUPERSTAR hub is available in loads of different surface finishes & different coloured spoke combinations, its difficult to choose your favorite, but you can have your SUPERSTAR hubs in any combination you like... Constructed (as expected from TRAMPA) using only the finest fixings available. All TRAMPA parts including these hubs are constructed using Marine grade Stainless steel that have all been brushed with Blue bolt lock paste to ensure the most secure of fixings. All nuts used also have a Nylock sleeve to ensure double quality & effective secure fixing! A 3mm Alan Key & a 7mm spanner are all the tools you need to construct or service your hubs. Trampa’s own Bearings (genuine ABEC 5 Bearings) fit perfectly into the spokes allowing the hub the fastest spin rate available. When purchasing bearings with the hubs the bearings can be purchased for as little as £1.25 each... Along with many other applications, the SUPERSTAR hub will fit to ALL other brands of trucks on the market including MBS and Scrub, they will fit to anything with a 12mm axle. There are conversion spacers available to convert 12mm bearings to work on 9.55mm skate axles (7/16ths Imperial) or 10mm (metric) scooter axles (see associated parts for details). Due to the fantastic design & the use of top quality materials in these hubs the finished product has ended up being exceptionally strong. This extra strength allows the rider to inflate their tyres well beyond normal recommended pressures, which in turn increases the top end roll speeds. We shouldn’t go recommending that you go over inflating your tires but if you are ever going to do it you will be safe in the knowledge that these hubs can handle the pressure that other hubs cant. During testing it was common for Trampa Team riders to inflate as high as 100psi, and beyond!!

M4 x 40mm Socket Capped Allen-Key Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 40mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special Bolt is specifically made for TRAMPA & is used to assemble the TRAMPA SUPERSTAR HUBS. The socket capped head of the Bolt screws neatly though the Spokes & into the fixing point in the Rim of the SUPERSTAR HUB eventually screwing  into the M4 nut on the other side easly.

Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

USED FOR CONNECTING:  

SUPERSTAR HUBS       
MEGASTAR HUBS       
PHATLADS HUBS

M4 Nyloc Nut - Marine Grade stainless steel Nylock Nut - Hub Nuts

Introducing TRAMPA's M4 (4mm Shaft) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M4 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts. 

This Nut is used to fix to tighten to the M4 Socket Capped Bolts that hold the HYPA & SUPERSTAR hubs together. To fit the nuts M4 use an 8mm spanner or  8mm Ratchet Socket to turn the Nut onto the Bolt whilst holding the bolt with a 3mm Allen Key. Always ensure your Nuts & Bolts are tight before you ride!

Genuine SUPERSTAR CENTER-SET Rim 3.75x 2 Inch fits all 3.75 Inch Tyres - GREEN with BLACK Logos

TRAMPA's SUPERSTAR Hub is a technically designed super-strength masterpiece of circular lushness & has been created for those who insist on fitting only the very best equipment! SUPERSTAR Hubs are available in loads of different Rim & Spoke colour combinations, its almost impossible to decide the combination you like the most!

The SUPERSTAR hub handles the highest inflation pressures on the market, which in turn increases roll speeds giving the rider the advantage over the competition, making them perfect for the best riders, i mean the insane! SUPERSTAR Rims are produced using original 'DuPont' materials (the best), whilst the STAR SPOKES are made using a custom made mould to give us an Extruded Aluminum profile that gets T6 Heat treated (Super Strength Aero-grade quality) & then sliced to requirement.

The SUPERSTAR Hub/wheel is fully constructed using A4 (Marine Grade) Stainless Steel Nuts & Bolts. Total & absolute product perfection!

SUPERSTAR Hubs are compatible with any tyre that TRAMPA offers up to 8 inches in size!

Disk Brakes for steep free-ride riding & Drive Gears for Electric boards or Electric motors can also be fitted to these amazing SUPERSTAR wheels... 

Bearings can be purchased at a discounted price when purchased with complete Hubs or wheels.

BLACK Anodised CLASSIC 5 SPOKE - Extruded T6 Aluminum Heat treated & CNC Precision milled fits all SUPERSTAR & MEGASTAR Wheels

TRAMPA SPOKES fit all SUPERSTAR & MEGASTAR Hubs. TRAMPA's Spokes are produced using the finest 6061 'Aero-Grade' Aluminum, which to maximise strength & performance are produced with the use of an Extrusion Die, which means TRAMPA spokes are made in one continuous piece before being sliced like bread to the required thickness. Before being sliced the extruded profile is T6 Heat Treated making the resulting Alloy extremely strong. 

Once sliced the Raw Spokes are sent to the CNC machine to mill out the bearing housing perfectly. Before being anodised the spokes are bead polished which not only gives a top quality finish but also removes all & any sharp edges, then finally sent away to the Anodisers to have the relevant striking colours added for top surface protection.

Check your spoke support spacers, O-Rings and hardware are in good condition when changing spokes & ensure all of your nuts & bolts are tight before you ride!

CUSTOM Spoke Support spacer - Installing a Spoke Support Conversin Spacer allowsyou to fit SUPERSTAR or MEGASTAR hubs to 9.525mm & 8mm Axles such as Evolve, Boosted & many others

This is the TRAMPA SUPERSTAR Spoke Support Spacer. It is used to gain extra strength for the SUPERSTAR wheel design by adding support to the Aluminum Spokes when the wheel is being used under high inflated pressures...

Precision injection moulded, using original DuPont materials, this Spacer provides essential support for the Spokes in the Superstar hubs. There is a Deep Shelf on the Rim of the Spacer which pushes into the internal side of the Spoke, positioning the Spacer/spoke perfectly for assembly. The thick plastic ensures a very strong support platform maximising Bearing support & spin rate always....

Ensure all your nuts & bolts are tight before riding!!