This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

PRIMO STRIKER 8 inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs

PRIMO STRIKER 8 inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs PRIMO STRIKER 8 inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs PRIMO STRIKER 8 inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs
RRP
£15+

PRIMO's 8 Inch STRIKER Tyre design brief was styled towards fast riding on hard packed dirt surfaces. It is made using a hard rubber compound with a Wide Center Bead to help achieve maximum rolling speeds whilst the close cut grip pattern around the sides of the tyre gives loads of grip on all kinds of changable terrain's. Using Harder Rubber makes the STRIKER Tyre very fast whilst  hard-wearing, The PRIMO STRIKER is a great Tyre option for riding on any Solid surfaces from dusty dirt tracks to hard packed asphalt. The STRIKER tyre will fit to all known Hubs that are commonly used for Mountainboarding & Kiteboarding.

Incorporated into the rubber of the tyre are 2x 3.75 Inch wide Steel Bands running around the inner rims. Regular sized Threads (TPI) tie the Steel bands together giving the PRIMO STRIKER the strength & structure to be inflated up to & well beyond the recommended factory inflation pressures. The more you inflate your Tyres the faster you will roll! If you over inflate the Tyres it is possible they will explode which may cause you serious injury! The official maximum inflation pressure set by the factory for the ALPHA Tyre is 50psi, but the ALPHA Tyres are made so well & the TRAMPA Hubs are so strong that our Crash test Dummies (I mean Team Riders) have been known to inflate these Tyres well beyond their recommended pressures with no problems to mention. If you do decide to go beyond the max inflation pressure ensure your nuts & bolts are tight & deflate back to a regular pressure after use. 

PRIMO STRIKER 8 inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs

PRIMO's 8 Inch STRIKER Tyre design brief was styled towards fast riding on hard packed dirt surfaces. It is made using a hard rubber compound with a Wide Center Bead to help achieve maximum rolling speeds whilst the close cut grip pattern around the sides of the tyre gives loads of grip on all kinds of changable terrain's. Using Harder Rubber makes the STRIKER Tyre very fast whilst  hard-wearing, The PRIMO STRIKER is a great Tyre option for riding on any Solid surfaces from dusty dirt tracks to hard packed asphalt. The STRIKER tyre will fit to all known Hubs that are commonly used for Mountainboarding & Kiteboarding.

Incorporated into the rubber of the tyre are 2x 3.75 Inch wide Steel Bands running around the inner rims. Regular sized Threads (TPI) tie the Steel bands together giving the PRIMO STRIKER the strength & structure to be inflated up to & well beyond the recommended factory inflation pressures. The more you inflate your Tyres the faster you will roll! If you over inflate the Tyres it is possible they will explode which may cause you serious injury! The official maximum inflation pressure set by the factory for the ALPHA Tyre is 50psi, but the ALPHA Tyres are made so well & the TRAMPA Hubs are so strong that our Crash test Dummies (I mean Team Riders) have been known to inflate these Tyres well beyond their recommended pressures with no problems to mention. If you do decide to go beyond the max inflation pressure ensure your nuts & bolts are tight & deflate back to a regular pressure after use. 

PRIMO's 8 Inch STRIKER Tyre design brief was styled towards fast riding on hard packed dirt surfaces. It is made using a hard rubber compound with a Wide Center Bead to help achieve maximum rolling speeds whilst the close cut grip pattern around the sides of the tyre gives loads of grip on all kinds of changable terrain's. Using Harder Rubber makes the STRIKER Tyre very fast whilst  hard-wearing, The PRIMO STRIKER is a great Tyre option for riding on any Solid surfaces from dusty dirt tracks to hard packed asphalt. The STRIKER tyre will fit to all known Hubs that are commonly used for Mountainboarding & Kiteboarding.

Incorporated into the rubber of the tyre are 2x 3.75 Inch wide Steel Bands running around the inner rims. Regular sized Threads (TPI) tie the Steel bands together giving the PRIMO STRIKER the strength & structure to be inflated up to & well beyond the recommended factory inflation pressures. The more you inflate your Tyres the faster you will roll! If you over inflate the Tyres it is possible they will explode which may cause you serious injury! The official maximum inflation pressure set by the factory for the ALPHA Tyre is 50psi, but the ALPHA Tyres are made so well & the TRAMPA Hubs are so strong that our Crash test Dummies (I mean Team Riders) have been known to inflate these Tyres well beyond their recommended pressures with no problems to mention. If you do decide to go beyond the max inflation pressure ensure your nuts & bolts are tight & deflate back to a regular pressure after use. 

PRIMO STRIKER 8 Inch Tyre
Official Dimensions -  8x 2x 3.75 Inch
Fits to hubs with  3.75 Inch Rims
Minimum Inflation  20psi
Maximum Inflation  75psi
Recommended Riding Inflation  25-40
Inflated tyre diameter  200
Inflated tyre width  50
1x PRIMO STRIKER 8 Inch Tyre 3.75x 2x 8

Weight: 270g
HCC: 4011900000
Do you want a discounted priced 8 Inch Inner Tube with your Tyre?
Do you want a discounted priced 8 Inch Inner Tube with your Tyre?

Yes please - 8 Inch PRIMO Inner Tube (+£7)
Yes please - 8 Inch PRIMO Inner Tube (+£7)

Yes please - 8 Inch INNOVA Inner Tube (+£7)
Yes please - 8 Inch INNOVA Inner Tube (+£7)

NO Inner Tube required Thanks!

Do you want to purchase a Hub to fit to this 8 Inch Tyre?
Do you want to purchase a Hub to fit to this 8 Inch Tyre?

No Hubs Required Thanks

Add a HYPA HUB (+£10)

Add a SUPERSTAR HUB (+£22.50)

Add a CENTER-SET MEGASTAR 8 (+£45)

Add a OFF-SET MEGASTAR 8 (+£45)

Add a DEEP-DISH MEGASTAR 8 - Stretched (+£50)

Add a PRIMO 3 Spoke - Stretched (+£10)

Add a PHATLAD Hub - Stretched (+£15)

Add a OFF-SET MEGASTAR 9 - Stretched (+£50)

Quantity required:
We have enough parts to make…  
RRP £15 - per tyre

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon