This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

CUSTOM BULL BARS for MOUNTAINBOARDS - T6 Heat Treated CNC'd Aluminium Uprights, with Hollow Aluminium Stash Tubes with Rubber end bungs

CUSTOM BULL BARS for MOUNTAINBOARDS - T6 Heat Treated CNC'd Aluminium Uprights, with Hollow Aluminium Stash Tubes with Rubber end bungs Mountainboard Bull Bar connector - CUSTOM Mountainboard Bull Bar Hollow Aluminium Stash Tube - CUSTOM 22x20x240mm M5 x 16mm TORX Socket Capped TORX Head Bolt ISO 4762 Marine Grade Stainless Steel Bull Bar Stash Bar water proof Plugs M5 x 5mm Black Steel Grub Screw Marine Grade Stainless Steel - Connects into Motor Mount to give Axle position on Mountainboards
RRP
£50+

Balls-Bars Connect to the underside of the front Truck. Once securely fitted they allow you to be able to connect such things as Lights, GPS System, a Speedo, GoPro, ash tray etc. :-)

Made from T6 Heat Treated Aluminum it is light weight & strong. The Mounting brackets have been precision CNC Milled to allow very easy assembly & construction to the truck &finally anodised in 10 colours for colour co-ordinating good looks & the best surface protection.

The narrower Carveboard Bull bars have a single crossbar & can be quite useful as a pulling handle, where as the wider & taller Mountainboard Bull-Bars have a Twin Crossbar design. Should you wish too, all these Bull-Bar parts can be can mixed and assembled with each other... they all use standard 22mm tube. The Bungs at the end of your Cross-bars (Stash-bars) can easily be removed. Once pressed into place they make a nice water proof stash place

M5 x 16mm TORX Socket Capped TORX Head Bolt ISO 4762 Marine Grade Stainless Steel

TRAMPA's M4 x 40mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special Bolt is specifically made for TRAMPA & is used to assemble the TRAMPA SUPERSTAR HUBS. The socket capped head of the Bolt screws neatly though the Spokes & into the fixing point in the Rim of the SUPERSTAR HUB eventually screwing  into the M4 nut on the other side easly.

Weighing just 3 grams each, they are very lightweight, look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

USED FOR: 

Bull Bars

M5 x 5mm Black Steel Grub Screw Marine Grade Stainless Steel - Connects into Motor Mount to give Axle position on Mountainboards

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

Mountainboard Bull Bar connector - CUSTOM

The TRAMPA MountainBoard Bull-Bar Uprights are used in the construction of the TWIN Bar BULL BARs

Mountainboard Bull Bar Hollow Aluminium Stash Tube - CUSTOM 22x20x240mm

The TRAMPA Stash Tubes come in 2 lengths to fit the different width Trucks we offer & are used in the construction of the BULL BARs.

This Bar is 240mm wide (22x20x240mm ) & anodised in 10 colour options. 

The Stash Tubes are installed with water proof plastic bungs at the ends just incase you ever need to carry anything that might be long & thin thats been made out of paper that might need keeping dry & pretty much crush free....?

Being standard 22mm outer size, It is possible to easily mount Go-Pros, Lights, Horns, Speakers, anything you want!

Bull Bar Stash Bar water proof Plugs

Uses the Stash Bar Water Proof Bung to neatly seal off the Stash Tubes that are used in the construction of the BULL BARS

Balls-Bars Connect to the underside of the front Truck. Once securely fitted they allow you to be able to connect such things as Lights, GPS System, a Speedo, GoPro, ash tray etc. :-)

Made from T6 Heat Treated Aluminum it is light weight & strong. The Mounting brackets have been precision CNC Milled to allow very easy assembly & construction to the truck &finally anodised in 10 colours for colour co-ordinating good looks & the best surface protection.

The narrower Carveboard Bull bars have a single crossbar & can be quite useful as a pulling handle, where as the wider & taller Mountainboard Bull-Bars have a Twin Crossbar design. Should you wish too, all these Bull-Bar parts can be can mixed and assembled with each other... they all use standard 22mm tube. The Bungs at the end of your Cross-bars (Stash-bars) can easily be removed. Once pressed into place they make a nice water proof stash place

2x Mountainboard Bull Bar connector - CUSTOM
2x Mountainboard Bull Bar Hollow Aluminium Stash Tube - CUSTOM 22x20x240mm
2x M5 x 16 Socket Capped TORX Bolt
4x Bull Bar Stash Bar water proof Plugs
4x M5 x 5mm Black Steel Grub Screw
Weight: 308g
Which colour MountainBoard Bull-Bar Uprights do you want?
Which colour MountainBoard Bull-Bar Uprights do you want?

BLACK Uprights
BLACK Uprights

BLUE Uprights
BLUE Uprights

BRONZE Uprights
BRONZE Uprights

GOLD Uprights
GOLD Uprights

GREEN Uprights
GREEN Uprights

GUNMETAL Uprights
GUNMETAL Uprights

PINK Uprights
PINK Uprights

PURPLE Uprights
PURPLE Uprights

RED Uprights
RED Uprights

SILVERUprights
SILVERUprights

Which colour Mountain Board Bull-Bar Cross Bar do you want?
Which colour Mountain Board Bull-Bar Cross Bar do you want?

BLACK Cross-Bar
BLACK Cross-Bar

BLUE Cross-Bar
BLUE Cross-Bar

BRONZE Cross-Bar
BRONZE Cross-Bar

GOLD Cross-Bar
GOLD Cross-Bar

GREEN Cross-Bar
GREEN Cross-Bar

GUNMETAL Cross-Bar
GUNMETAL Cross-Bar

PINK Cross-Bar
PINK Cross-Bar

PURPLE Cross-Bar
PURPLE Cross-Bar

RED Cross-Bar
RED Cross-Bar

SILVER Cross-Bar
SILVER Cross-Bar

Quantity required:
We have enough parts to make…  
RRP £50 - per set

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon