This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

Custom 9 inch Primo Wheel - Primo 3 Spoke composite Hub with 9 Inch Tyre

Custom 9 inch Primo Wheel - Primo 3 Spoke composite Hub with 9 Inch Tyre Custom 9 inch Primo Wheel - Primo 3 Spoke composite Hub with 9 Inch Tyre Custom 9 inch Primo Wheel - Primo 3 Spoke composite Hub with 9 Inch Tyre PRIMO 3 Spoke Composite Hub 3.75/4x 2.5 Inch - Perfect for 9 inch tyres PRIMO 3 Spoke Composite Hub 3.75/4x 2.5 Inch - Perfect for 9 inch tyres PRIMO 3 Spoke Composite Hub 3.75/4x 2.5 Inch - Perfect for 9 inch tyres 9 inch Tyres measure 4x 2.5x 9 Inch 230x75x with 4 Inch Rim will fit to all 4 inch Hubs Custom 9 inch Primo Wheel - Primo 3 Spoke composite Hub with 9 Inch Tyre 9 Inch Re-enforced Inner Tube made by INNOVA - 225x65mm
RRP FROM
£37.50+

How to put a wheel on an Infinity or Vertigo truck

How to put a wheel on an Ultimate Truck

PRIMO's 3 Spoke Composite Hub has a center set bearing position & because of its special '3.75/4 Inch Rim' means it is capable of fitting both 3.75 Inch Rim Tyres (8 Inch Tyres) & 4 Inch Rim Tyres (9 inch Tyres). 

The 3 Spoke PRIMO hubs are assembled using just 3 heavy duty M6 x 30mm Stainless Steel Socket capped Bolts & M6 Nylock nuts. The Composite hub is very Strong but a bit Chunky. IMO its best fitted with 9 Inch Tyres or Any tyre using a 4 inch Rim.

Because of the extra size of this hub it is strong ebough for many applicatuons. When comparing the weight to the super slim design of the PHATLADS hubs (weighing just 184g), the PRIMO 3 Spoke hub weighing 282g does weigh in a little on the heavy side, but the 3 spoke'd solid structure is a timeless classic with an awesome reputation for not letting you down & is currently the only option hub that TRAMPA offers should you wish to mount 'Center-Set 9 inch Wheels'

Although slightly tighter to fit into than other hubs, TRAMPA's regular 28mm Bearings will fit perfectly into the Bearing housing of the PRIMO hub. As a top tip place the bearings in the freezer for 30 minutes before inserting them into the hub, the cold will cause the metal of the bearing to shrink & fit easier into the hub!

To fit the PRIMO 3 spoke hubs onto the TRAMPA TRUCKS you will need a special 12x 9.5mm Axle Spacer to allow the hub to position onto the axle correctly.

Bearings can be purchased at a discounted price when purchased with Hubs.

M6 x 30mm Socket Capped Allen-Key Bolt for primo hub - Marine Grade Stainless steel

TRAMPA's M6 x 30mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This Bolt is used to assemble the PRIMO 3 Spoke Hubs. The socket capped head of the Bolt screws neatly though the HUB eventually screwing into the Marine Grade Stainless Steel M6 Nylock Nut on the other side of the hub. 

Weighing just 8 grams each, these Bolts are lightweight, look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers nuts & bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

You’ll will need a 5mm Allen Key  to tighten & loosen the Bolt from the nut. Ensure all your Nuts & Bolts are tight before riding!

M6 Nut - Marine Grade Stainless steel Nylock Nut - Fixes Bindings & Trucks to Deck

Introducing TRAMPA's M6 (6mm Thread) A4 Grade Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M6 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M6 Bolts that hold the TRUCKS to the DECK for the HOLYPRO Decks & also for the countersunk bolts connecting the L BRACKETS TO the DECKs. Use an 10mm spanner or SOCKET for a Ratchet Driver to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

9 INCH Inner Tube INNOVA 9x2.5 Inch 225x65mm - fits 45 inch Rims & 9 inch tyres

INNOVA's Re-enforced 9 Inch inner tube measures 225mm x 65mm and will fit into all the of the 9 inch Tyres on the TRAMPA website. This 9 Inch Inner Tube will also fit into the tyres of other brands. Being made from slightly thicker rubber, this Inner Tube is slightly heavier than alternatives but the Inner Tube will handle much higher than recommended inflation rates... Therefore this INNOVA inner tube is ideal for heavier or pro riders seeking high inflation pressures...

This INNOVA Inner tube will fit into all known 9 inch tyres as well as most ATB Hubs on the market & it comes as expected with a "Plastic Anti Dust" Valve cap!

Punctures Suck! Its always possible to get a puncture in the environments we ride in, so always carry a spare if you don't want your day spoiling...

PRIMO 3 spoke Hub - Fits the 9 inch stiker tyre

PRIMO's 3 Spoke Composite Hub has a center set bearing position & because of its special '3.75/4 Inch Rim' means it is capable of fitting both 3.75 Inch Rim Tyres (8 Inch Tyres) & 4 Inch Rim Tyres (9 inch Tyres). 

 The 3 Spoke PRIMO hubs are assembled using just 3 heavy duty M6 x 30mm Stainless Steel Socket capped Bolts & M6 Nylock nuts. The Composite hub is very Strong but a bit Chunky. IMO its best fitted with 9 Inch Tyres or Any tyre using a 4 inch Rim.

Because of the extra size of this hub it is strong ebough for many applicatuons. When comparing the weight to the super slim design of the PHATLADS hubs (weighing just 184g), the PRIMO 3 Spoke hub weighing 282g does weigh in a little on the heavy side, but the 3 spoke'd solid structure is a timeless classic with an awesome reputation for not letting you down & is currently the only option hub that TRAMPA offers should you wish to mount 'Center-Set 9 inch Wheels'

Although slightly tighter to fit into than other hubs, TRAMPA's regular 28mm Bearings will fit perfectly into the Bearing housing of the PRIMO hub. As a top tip place the bearings in the freezer for 30 minutes before inserting them into the hub, the cold will cause the metal of the bearing to shrink & fit easier into the hub!

To fit the PRIMO 3 spoke hubs onto the TRAMPA TRUCKS you will need a special 12x 9.5mm Axle Spacer to allow the hub to position onto the axle correctly.

Bearings can be purchased at a discounted price when purchased with Hubs.

9 inch Tyres measure 4x 2.5x 9 Inch 230x75x with 4 Inch Rim will fit to all 4 inch Hubs

9” Wheels are a huge advantage when riding on challenging off-road terrain. The Larger circumference allows for a higher rolling speeds, while the extra width provides more grip.

9” PRIMO STRIKER TYRE’s design brief was styled towards fast riding on hard packed dirt surfaces. Made using a hard rubber compound with a Wide Center Bead to help achieve maximum rolling speeds. The close cut grip pattern around the sides of the tyre gives loads of grip on all kinds of changeable terrain. Using Harder Rubber makes the STRIKER Tyre very fast whilst hard-wearing.

9” INNOVA INLINE TYRE has a straight cut profile that make it the perfect grip option for easy rolling. Working best on hard surfaces, such as Skate parks, Tarmac or Asphalt. The 3mm deep INLINE grooved surface, encourages the tyre to "Track" in a straight line.

9" MUD PLUGGER TYRES are the perfect grip choice when the riding conditions turn bad & you need the maximum amount grip! The Mud-Plugger tyre has a wide center bead, giving good top end roll speed, but is also deeply grooved with aggressive Grip around its sides Mud-Pluggers works best in bad conditions!

9" DIAMOND TREAD TYRES are an amazing all-round choice for off-road riding. Hard compound rubber allows for fast rolling speeds, whilst the aggressive grip pattern provides amazing grip on both hard & soft dirt.

ALL 9” TYRES will fit TRAMPA’s PRIMO 3-SPOKE or 9” DEEPDISH MEGASTAR Hubs

PRIMO's 3 Spoke Composite Hub has a center set bearing position & because of its special '3.75/4 Inch Rim' means it is capable of fitting both 3.75 Inch Rim Tyres (8 Inch Tyres) & 4 Inch Rim Tyres (9 inch Tyres). 

The 3 Spoke PRIMO hubs are assembled using just 3 heavy duty M6 x 30mm Stainless Steel Socket capped Bolts & M6 Nylock nuts. The Composite hub is very Strong but a bit Chunky. IMO its best fitted with 9 Inch Tyres or Any tyre using a 4 inch Rim.

Because of the extra size of this hub it is strong ebough for many applicatuons. When comparing the weight to the super slim design of the PHATLADS hubs (weighing just 184g), the PRIMO 3 Spoke hub weighing 282g does weigh in a little on the heavy side, but the 3 spoke'd solid structure is a timeless classic with an awesome reputation for not letting you down & is currently the only option hub that TRAMPA offers should you wish to mount 'Center-Set 9 inch Wheels'

Although slightly tighter to fit into than other hubs, TRAMPA's regular 28mm Bearings will fit perfectly into the Bearing housing of the PRIMO hub. As a top tip place the bearings in the freezer for 30 minutes before inserting them into the hub, the cold will cause the metal of the bearing to shrink & fit easier into the hub!

To fit the PRIMO 3 spoke hubs onto the TRAMPA TRUCKS you will need a special 12x 9.5mm Axle Spacer to allow the hub to position onto the axle correctly.

Bearings can be purchased at a discounted price when purchased with Hubs.

Fits 76 Tooth Pulley for best gearing on Electric Boards - 

1x PRIMO 3 spoke Hub - Fits the 9 inch stiker tyre
3x M6 x 30 Socket cap Allen-Key Stainless Steel Bolt
3x M6 Nut - Marine Grade Stainless steel Nylock nut
1x 9 inch Tyres measure 4x 2.5x 9 Inch 230x75x with 4 Inch Rim
1x 9 INCH Inner Tube - INNOVA
Weight: 916g
Which Tyre do you want to fit to this 3 spoke PRIMO hub??
Which Tyre do you want to fit to this 3 spoke PRIMO hub??

Fit me a Very Stretched URBAN Tyre

Fit me a Very Stretched 7 Inch Tyre

Fit me a Stretched 8 Inch Tyre (+£2.50)

Fit me an 8 Inch GOLFA Tyre (+£5)
Fit me an 8 Inch GOLFA Tyre (+£5)

Fit me a 9 Inch Tyre (+£5)

Fit me a 10 Inch Tyre (+£5)

Quantity required:
We have enough parts to make…  
RRP FROM £37.50 - per wheel

Excluding VAT
HCC: 9503001000

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon