This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

CLASSIC Monster Box - Rugged OXFORD Weave Protective Cover

CLASSIC Monster Box - Rugged OXFORD Weave Protective Cover CLASSIC Monster Box - Rugged OXFORD Weave Protective Cover
RRP
£15+

TRAMPA's CLASSIC MONSTER Box is capable of housing up to 2x 6s 22Ah Li-Po Cells & 2x VESC 6 speed controllers at the same time.

TRAMPA's different sized Monster boxes are all made using 2mm & 4mm thick GR4 Re-enforced Glass Fiber panels. The Base & Split Lid panels have been CNC machined with a 2.1mm groove to allow the 2mm thick side panels to slot in & inter-connect perfectly, giving a very strong & tight construction to the box. The box is held together with Anodised Aluminum Hex Spacers which use Stainless Steel Dome Headed TORX Bolts that in turn use lock-tite for permenant connection are screwed through the base of the box, whilst Stainless Steel Countersunk TORX Bolts mounted in a Anodised decorative washers are then used to screw the lid down into the Hex Spacers giving an incredibly neat tight strong & smart finish to the assembly.

As the Box uses the latest Split lid & Inspection pit, it is possible to undo the Countersunk Lid Bolts & remove either the Battery Lid-Side or the VESC Lid-Side of your box, should you ever wish to remove your batteries or take out a VESC without collapsing the entire box down.

Fitted to the top of the Monster Box is the Inspection Pit. Turning the thumb screw on the top gives you access to the Battery Charge Cable & Balance leads that are pushed through rubber grommets to stop the ingress of moisture & dirt, & preventing you from having to open the entire box to do your charging & balancing. 

The Classic Monster Box connects to a TRAMPA Mountain board deck using a Universal Mount & is top side mounted between the riders feet. The Power Cables for the motors exit the box through water resistant Rubber Grommets from the underside of the box, feeding into the protected grooved channels of the WINGS running under the riders feet, eventually poking out at the rear of the deck where the motors are waiting to be connected.

The MONSTER Box is surface mounted to give maximum ground clearance when riding off road. The majority of TRAMPA products are designed to be ridden off road. When you ar riding off road you need extra clearance or you will get snagged up on anything that protrudes from the ground, bashing your battery box on rocks is not a good idea, plus mounting the box on the surface in the way that we do using the universal mount means we retain 95% of the flex of the deck that the TRAMPA decks are so much famed for.

​When installing your chosen batteries into your MONSTER BOX, it’s a good idea to secure them to the base with Velcro, then pad the area around the batteries with good quality foam. This reduces any ride-ruining-rattling sounds whilst keeping the batteries safe from bouncing around when riding over rough terrain.

If you are running full power using the VESC Speed controllers & want good temperature control then it is worth while considering adding a VESC 6 Heat-Sink or two with your purchase.

The Monster Box is NOT Waterproof. It is at best Splash Proof. If submerged into water then you are in trouble. Its best to avoid puddles as you do not know how deep they are. I use puddles as something to carve around and turn them into something fun, (The TRAMPA Stunt Monkey can jump the puddles!) and if you are using this product in an outside environment when its likely to get covered in mud and splashy water like we do with our Mountainboards, then it is wise practice to protect your equipment & add a Monster Box cover. The Thicker Luxury Monster Box cover is fitted with long pockets down the side to store your WAND Controller or critical tools needed on a ride with a removable 'Velcro' top strip that easily peel off allowing you to get access to the inspection pit without having to remove the entire & potentially muddy cover, which just makes life that bit easier. It is my advise to cover the Luxury cover with the Monster Box Muck off or splash proof cover. The Nylon Splash proof cover adds more moisture & dust protection, and adding them both means you keep your luxury cover as clean as possible, but still have access to the charging & balance cables whilst gaining maximum water proofing protection to your equipment


TRAMPA Branded shower cap, used for keeping the MONSTER BOX dry on wet & rainy rides

CLASSIC Monster Box - Rugged OXFORD Weave Protective Cover

TRAMPA's 'Rugged' or 'Oxford Weave' CLASSIC MONSTER Box 'Muk-Off' Cover is an upgraded & sturdier version of the original Classic Monster Box 'Muck off' cover. The cover is stylishly printed with TRAMPA's 'Pimp-Ass' logos using highly reflective ink in an attempt to give you additional safety when riding at night.

The Rugged 'Muk-Off' cover positions neatly over the top of the MONSTER Box to give protection to your electronics from the potential ingress of dirt & moisture, however the Oxford Weave Material is 'NOT WATER PROOF'!! It is however 'heavy splash proof' so i would say it is rain proof (So long as it is not a monsoon or similar) & passing through a shallow puddle is not a problem BUT don't suddenly think that your board turns into a submarine & suddenly becomes is 100% waterproof just because you have a Muk-Off cover over the top of the box !! lol!

The Rugged cover is fitted with an elasticated hem & once it is pulled over the box & manipulated into the correct position, the elastic pulls itself in & around at the base of the box, to give a very nice/neat & practical look & at the same time giving you all the confidence to go out & use the board how its meant to be used!!

The Rugged cover has been extensively used by the TRAMPA crew & has proved successful in protecting the electronics from the harsh elements such as rain, mud & dirt. The Muk-Off Cover is best used when combined with the LUXURY MONSTER BOX Cover, using the Muk-Off Cover to protect the clean looks of the Luxury cover (which also has pockets down its side for tools and spare tube etc), when combined together then this is for sure your most Element Proof combination we can offer you for sure....

To charge when you have Monster Box covers on - you must remove the Muk-Off cover to charge, however the Luxury cover has a velcro secured inspection pit giving easy access to the charge point, so the Luxury cover can remain in place whislt you are charging...

TRAMPA's CLASSIC MONSTER Box is capable of housing up to 2x 6s 22Ah Li-Po Cells & 2x VESC 6 speed controllers at the same time.

TRAMPA's different sized Monster boxes are all made using 2mm & 4mm thick GR4 Re-enforced Glass Fiber panels. The Base & Split Lid panels have been CNC machined with a 2.1mm groove to allow the 2mm thick side panels to slot in & inter-connect perfectly, giving a very strong & tight construction to the box. The box is held together with Anodised Aluminum Hex Spacers which use Stainless Steel Dome Headed TORX Bolts that in turn use lock-tite for permenant connection are screwed through the base of the box, whilst Stainless Steel Countersunk TORX Bolts mounted in a Anodised decorative washers are then used to screw the lid down into the Hex Spacers giving an incredibly neat tight strong & smart finish to the assembly.

As the Box uses the latest Split lid & Inspection pit, it is possible to undo the Countersunk Lid Bolts & remove either the Battery Lid-Side or the VESC Lid-Side of your box, should you ever wish to remove your batteries or take out a VESC without collapsing the entire box down.

Fitted to the top of the Monster Box is the Inspection Pit. Turning the thumb screw on the top gives you access to the Battery Charge Cable & Balance leads that are pushed through rubber grommets to stop the ingress of moisture & dirt, & preventing you from having to open the entire box to do your charging & balancing. 

The Classic Monster Box connects to a TRAMPA Mountain board deck using a Universal Mount & is top side mounted between the riders feet. The Power Cables for the motors exit the box through water resistant Rubber Grommets from the underside of the box, feeding into the protected grooved channels of the WINGS running under the riders feet, eventually poking out at the rear of the deck where the motors are waiting to be connected.

The MONSTER Box is surface mounted to give maximum ground clearance when riding off road. The majority of TRAMPA products are designed to be ridden off road. When you ar riding off road you need extra clearance or you will get snagged up on anything that protrudes from the ground, bashing your battery box on rocks is not a good idea, plus mounting the box on the surface in the way that we do using the universal mount means we retain 95% of the flex of the deck that the TRAMPA decks are so much famed for.

​When installing your chosen batteries into your MONSTER BOX, it’s a good idea to secure them to the base with Velcro, then pad the area around the batteries with good quality foam. This reduces any ride-ruining-rattling sounds whilst keeping the batteries safe from bouncing around when riding over rough terrain.

If you are running full power using the VESC Speed controllers & want good temperature control then it is worth while considering adding a VESC 6 Heat-Sink or two with your purchase.

The Monster Box is NOT Waterproof. It is at best Splash Proof. If submerged into water then you are in trouble. Its best to avoid puddles as you do not know how deep they are. I use puddles as something to carve around and turn them into something fun, (The TRAMPA Stunt Monkey can jump the puddles!) and if you are using this product in an outside environment when its likely to get covered in mud and splashy water like we do with our Mountainboards, then it is wise practice to protect your equipment & add a Monster Box cover. The Thicker Luxury Monster Box cover is fitted with long pockets down the side to store your WAND Controller or critical tools needed on a ride with a removable 'Velcro' top strip that easily peel off allowing you to get access to the inspection pit without having to remove the entire & potentially muddy cover, which just makes life that bit easier. It is my advise to cover the Luxury cover with the Monster Box Muck off or splash proof cover. The Nylon Splash proof cover adds more moisture & dust protection, and adding them both means you keep your luxury cover as clean as possible, but still have access to the charging & balance cables whilst gaining maximum water proofing protection to your equipment

Battery Box Width - 205m
Battery Box Length - 190mm
Box Height - 74mm  


TRAMPA's 18650 CLASSIC MONSTER Box 'RUGGED' Cover is a sturdy version of the original 18650 Monster Box 'Muck off' cover & positions neatly over the top of the MONSTER Box to protect your electronics from the ingress of dirt & moisture.

Fitted with a long deep pocket down the side of the box, the pocket is easy big enough to store your wand securely when not riding or stow your ride tools instead of putting them in your backpack...

On the top of the box is a reflective Velcro Strip that peels back to reveal the inspection pit, so the RUGGED Cover does not need to be removed to charge or balance your batteries keeping everything inside nice & clean.

Stylishly stitched with reflective material & printed with TRAMPA's pimp-ass logo's & some sexy styling lines to match, the 18650 Classic Monster Box Rugged cover is fitted with an elasticated hem, & once it is manipulated into the correct position, the elastic pulls itself in & around at the base of the box, to give a very nice/neat & practical look, giving you all the confidence to go out and get it really dirty!!

The Classic monster Box Rugged cover has been extensively used by the TRAMPA crew & has proved successful in protecting from the harsh elements such as rain, mud & sand. The 18650 Rugged Cover is no more Heavy Splash proof than the lighter weight '18650 Muk-Off' cover, However when combined together, using the Muck off Cover to protect the Clean looks of the rugged cover, then this is for sure your most Element Proof combination we can offer you for sure....

In this Kit you get the following parts

This box is made up of the following parts:
1x Monster Box Cover
-------------------------------------------------------------------
External Box Length - 271mm
External Box Width - 210.5mm
External Box Height - 87mm
Empty Internal Box Length - 251mm
Empty Internal Box Width - 193mm
Empty Internal Box Height - 81mm
Weight: 28g
Quantity required:
We have enough parts to make…  
RRP £15 - each

Excluding VAT
HCC: 42029291

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon