This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

BRONZE 9 inch OFF-SET MEGASTARS Rim with BLACK Spokes & 9 Inch DIAMOND Tyres

BRONZE 9 inch Deep-Dish MEGASTARS Rim with BLACK Spokes & 9 Inch DIAMOND Tyres MEGASTAR 9 Rims Measure 3.75/4x 2.5 Inch & the bearings are positioned OFF-SET & accept 3.75 & 4 Inch Rim Tyres - BRONZE BLACK Anodised CLASSIC 5 SPOKE - Extruded T6 Aluminum Heat treated & CNC Precision milled fits all SUPERSTAR & MEGASTAR Wheels M4 x 40mm Socket Capped Allen-Key Bolt - Marine Grade Stainless steel with locking paste M4 Nyloc Nut - Marine Grade stainless steel Nylock Nut - Hub Nuts CUSTOM Spoke Support spacer - Installing a Spoke Support Conversin Spacer allowsyou to fit SUPERSTAR or MEGASTAR hubs to 9.525mm & 8mm Axles such as Evolve, Boosted & many others M4 x 16mm TORX Socket Capped Head Bolt ISO 4762 Marine Grade Stainless Steel
RRP FROM
£75+

How to put a wheel on an Infinity or Vertigo truck

How to put a wheel on an Ultimate Truck

M4 x 16mm TORX Socket Capped Head Bolt ISO 4762 Marine Grade Stainless Steel

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M4 x 40mm Socket Capped Allen-Key Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 40mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special Bolt is specifically made for TRAMPA & is used to assemble the TRAMPA SUPERSTAR HUBS. The socket capped head of the Bolt screws neatly though the Spokes & into the fixing point in the Rim of the SUPERSTAR HUB eventually screwing  into the M4 nut on the other side easly.

Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

USED FOR CONNECTING:  

SUPERSTAR HUBS       
MEGASTAR HUBS       
PHATLADS HUBS

M4 Nyloc Nut - Marine Grade stainless steel Nylock Nut - Hub Nuts

Introducing TRAMPA's M4 (4mm Shaft) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M4 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to tighten to the M4 Socket Capped Bolts that hold the HYPA & SUPERSTAR hubs together. To fit the nuts M4 use an 8mm spanner or  8mm Ratchet Socket to turn the Nut onto the Bolt whilst holding the bolt with a 3mm Allen Key. Always ensure your Nuts & Bolts are tight before you ride!

MEGASTAR 9 OFF-SET Rims Measure 3.75/4x 2.5 Inch & the bearings are positioned OFF-SET & accept 3.75 & 4 Inch Rim Tyres - BRONZE

It was hard to ever imagine that TRAMPA's SUPERSTAR hub could ever be improved upon - but that's just what we’ve gone’n’done! The Super Sexy MEGASTAR Rims are a PRO version of the already amazing SUPERSTAR Rim!

CNC Milled from a solid block of T6 aluminium, polished, anodised (in 10 different colours!) & logo-ed up for a pimp appearance - all of the various MEGASTAR Rims we offer fit the regular SUPERSTAR SPOKES, so if you already use Superstars & fancy an upgrade, you’ll only need to purchase the Rims to make the swap.


MEGASTAR Hubs can handle the highest inflation pressures of any small wheel on the market. Increasing inflation rates ultimately increases maximum roll speeds, making these hubs the perfect option for the insane among us!

MEGASTAR Rims have extra threaded bolt holes for wheel balancing purposes -  the extra holes allow you to screw in 2x extra M4x16mm Socket cap TORX Bolts directly opposite the valve - which in turn counter-balances, creating a smoother rotation &  faster spin rate!


Megastars are available in a variety of sizes, with different spoke/bearing positioning for a number of different applications!


CENTER-SET Bearing position, which is a direct aluminium replacement of the original plastic-injection Superstar rim. Keeping the bearings centrally-located within the hub leaves the wheelbase unchanged, for a nimble feeling & riding board.

Megastar 8 CENTRE SET RIMS fit all 3.75x2 inch Rim Tyres & Regular Superstar / Skinny BB-Star Spokes.


OFF-SET Bearing position moves the wheels further from your feet - widening the boards wheelbase, which in turn increases stability - perfect for large people & small Boards. Initially created in conjunction with narrower Truck Models (12-Fifties & Mini Spring Trucks) in order to grant clearance for bigger tyres or rear-mounted battery boxes.

Megastar 8 OFF SET RIMS fit all 3.75x2 inch Rim Tyres & Regular Superstar / Skinny BB-Star Spokes.

Megastar 9 OFF SET RIMS fit all 3.75x2.5 inch Rim Tyres & Regular Superstar / Phat BB-Star Spokes.


DEEP-DISH Rims are as pimp as it gets! These elongated rims both widen the wheelbase of a board as well as the contact patch of the tyres - improving both stability & grip! While also granting extra clearance for fitting larger tyres or rear-mounted battery boxes.
 

Megastar 8 DEEP DISH RIMS fit all 3.75/4 x 2.5 inch Rim Tyres & Regular Superstar / Skinny BB-Star Spokes.

Megastar 9 DEEP DISH RIMS fit all 3.75/4 x 3 inch Rim Tyres & Regular Superstar / Skinny BB-Star Spokes.


The CENTER SET & OFF SET (3.75 x 2 Inch) MEGASTAR 8 HUBs fit ANY of the tyres in TRAMPA's range up to 8 inches in Diameter - including the 5 Inch Gummies tyres, 6.5 Inch URBAN Treads, 7 Inch Inline tyres & ANY 8 inch tyre option.

The DEEP DISH (3.75/4 x 2.5 Inch) MEGASTAR 8 HUB fits most tyres in TRAMPA's range up to 8 inches in Diameter, widening the tread & increasing the contact patch - including 6.5 Inch URBAN Treads, 7 Inch Inline Tyres & ANY 8 inch Tyre option.

The OFF SET & DEEP DISH (3.75/4 x 2.5/3 Inch) MEGASTAR 9 HUBs fit most of the tyres in the TRAMPA product Range up to 10 inches in Diameter, widening the tread & increasing the contact patch - including the 6.5 Inch URBAN Treads, 7 Inch Inline Tyres & ANY 8, 9 or 10  inch tyre options TRAMPA offers.


TRAMPA's REGULAR SUPERSTAR SPOKES are made from Extruded 6061 Aluminum (Super Strength Aero-grade quality) & comes in a range of colours to satisfy your taste.
TRAMPA’s new BB STAR Spokes are as lush as it gets - CNC’d from T6 Aluminium, available in two models - SKINNY (fits ALL MEGASTAR rims) or PHAT (fits OFF SET MEGASTAR 9 ONLY).

The MEGASTAR's hub construction is held together by using 5x Socket cap M4 x 40mm A4 (Marine Grade) Stainless Steel Nuts & Bolts that'll never rust on you!

Further pimp up your Megastar hubs with M4 Socket Cap spacers - anodised in 10 colours!

TRAMPA's MEGASTAR Hubs can be used in conjunction with any of the Pulleys that fit to SUPERSTAR hubs.

It's possible to fit any Bearing size TRAMPA offers into MEGASTAR Rims. As Standard the Superstar / Megastar spokes accept Mountainboard bearings for 12mm Axles - these bearings can be fitted with Reducer Sleeves that allow the hub to fit to 9.525mm Axles. If you use the Special Spoke Support Spacer into the assembly of the hub, you can fit to 8mm Longboard Axles - where hundreds of top quality bearing options are available to choose from.

 

 

 

BLACK Anodised CLASSIC 5 SPOKE - Extruded T6 Aluminum Heat treated & CNC Precision milled fits all SUPERSTAR & MEGASTAR Wheels

TRAMPA SPOKES fit all SUPERSTAR & MEGASTAR Hubs. TRAMPA's Spokes are produced using the finest 6061 'Aero-Grade' Aluminum, which to maximise strength & performance are produced with the use of an Extrusion Die, which means TRAMPA spokes are made in one continuous piece before being sliced like bread to the required thickness. Before being sliced the extruded profile is T6 Heat Treated making the resulting Alloy extremely strong

Once sliced the Raw Spokes are sent to the CNC machine to mill out the bearing housing perfectly. Before being anodised the spokes are bead polished which not only gives a top quality finish but also removes all & any sharp edges, then finally sent away to the Anodisers to have the relevant striking colours added for top surface protection.

Check your spoke support spacers, O-Rings and hardware are in good condition when changing spokes & ensure all of your nuts & bolts are tight before you ride!

 

 

 

 

CUSTOM Spoke Support spacer - Installing a Spoke Support Conversin Spacer allowsyou to fit SUPERSTAR or MEGASTAR hubs to 9.525mm & 8mm Axles such as Evolve, Boosted & many others

This is the TRAMPA SUPERSTAR Spoke Support Spacer. It is used to gain extra strength for the SUPERSTAR wheel design by adding support to the Aluminum Spokes when the wheel is being used under high inflated pressures...

Precision injection moulded, using original DuPont materials, this Spacer provides essential support for the Spokes in the Superstar hubs. There is a Deep Shelf on the Rim of the Spacer which pushes into the internal side of the Spoke, positioning the Spacer/spoke perfectly for assembly. The thick plastic ensures a very strong support platform maximising Bearing support & spin rate always....

Ensure all your nuts & bolts are tight before riding!!

 

 

 

Using TRAMPA's NEW & AMAZING 9 inch Deep-Dish MEGASTAR wheels, it is now possible to comfortably fit larger sized 9 inch wheels into the assembly any of the TRAMPA Belt Drives or Spur Gear Drives using 16 inch Mountain board Spring Trucks. 

Using 9 inch wheels which have been CNC Precision Milled from two solid blocks, milled with an offset bearing position, will significantly widen your wheel base making the board feel more stable & planted, whilst the additional width of the tires (9 inch Mud-Pluggers are 2.5 Inches wide where as 8 inch tyres are just 2 inches wide) increases the surface contact with the ground & as you can tell from the name of the Tyre which pretty much describes what its capable of, the extra 1/2 inch of tyre & the aggressive directional grip results in absolute heaps of extra grip comparing to the smaller 8 inch tyres, especially when riding off road in mddy conditions.

The increased tyre profile size of the well gripped sidewall will not only give you more Grip but also loads of extra Comfort when rolling over rough stuff & the increase of overall wheel size going from 8 inch to 9 inch will give you a natural Geared increase in Top Speed by approx 5%, making the new MEGASTAR hubs a must have piece of equipment for all serious of road electric mountain board riders out there...

It is possible to fit the 9 inch MEGASTAR WHEELS to any of TRAMPA's 66 Tooth Belt Driven Slave Pullies or 58/59 Tooth Spur Gear Drive Pulleys that would usually fit to the 8 inch Superstar wheels, So if you're looking for the latest all round upgrade, then this is the one for you!

The downside to using 9 inch wheels is the increase in weight... with all the increase in size they are bound to weigh more than the smaller wheels & rubber can weigh a lot... so to gain the extra grip that we talk about without adding to much extra weight we suggest that you only need to fit 2x of the 9 inch wheels on the rear drive wheels giving you the grip without all the weight of 4x wheels, so you only need just 2x 9 inch wheels to gain the extra Grip, speed & Comfort without too much extra weight...  You might be thinking, what 8 inch on the front and 9 inch on the back.... yep thats right guys.... You might be thinking but then its higher one end than the other, Yep, thats right.... the extra height at the rear almost forces you int a more aggressive stance, positioning you ready to take the huge forces in the acceleration... the stance is nice, the tyres are amazing.....!!!

Fits 76 Tooth Pulley for best gearing on Electric Boards - 

1x MEGASTAR 9 OFF-SET Rims 3.75/4x 2.5 Inch - BRONZE
2x CLASSIC 5 Spoke - BLACK
5x M4 x 40 Socket Cap Allen-Key Stainless Steel Bolt
5x M4 Nut - Marine Grade Stainless steel Nylock Nut
1x CUSTOM Spoke Support spacer
2x M4 x 16 Socket Cap TORX Bolt

Weight: 395g
HCC: 9503001000
What colour 3.75/4x 2.5 Inch OFF-SET MEGASTAR 9 Rim would you like?
What colour 3.75/4x 2.5 Inch OFF-SET MEGASTAR 9 Rim would you like?

OFF-SET MEGASTAR 9 Rim - BLACK
OFF-SET MEGASTAR 9 Rim - BLACK

OFF-SET MEGASTAR 9 Rim - BLUE
OFF-SET MEGASTAR 9 Rim - BLUE

OFF-SET MEGASTAR 9 Rim - BRONZE
OFF-SET MEGASTAR 9 Rim - BRONZE

OFF-SET MEGASTAR 9 Rim - GOLD
OFF-SET MEGASTAR 9 Rim - GOLD

OFF-SET MEGASTAR 9 Rim - GREEN
OFF-SET MEGASTAR 9 Rim - GREEN

OFF-SET MEGASTAR 9 Rim - GUNMETAL
OFF-SET MEGASTAR 9 Rim - GUNMETAL

OFF-SET MEGASTAR 9 Rim - PINK
OFF-SET MEGASTAR 9 Rim - PINK

OFF-SET MEGASTAR 9 Rim - PURPLE
OFF-SET MEGASTAR 9 Rim - PURPLE

OFF-SET MEGASTAR 9 Rim - RED
OFF-SET MEGASTAR 9 Rim - RED

OFF-SET MEGASTAR 9 Rim - SILVER
OFF-SET MEGASTAR 9 Rim - SILVER

What colour CLASSIC spokes do you want?
What colour CLASSIC spokes do you want?

CLASSIC Spokes - BLACK
CLASSIC Spokes - BLACK

CLASSIC Spokes - BLUE
CLASSIC Spokes - BLUE

CLASSIC Spokes - BRONZE
CLASSIC Spokes - BRONZE

CLASSIC Spokes - GOLD
CLASSIC Spokes - GOLD

CLASSIC Spokes - GREEN
CLASSIC Spokes - GREEN

CLASSIC Spokes - GUNMETAL
CLASSIC Spokes - GUNMETAL

CLASSIC Spokes - PINK
CLASSIC Spokes - PINK

CLASSIC Spokes - PURPLE
CLASSIC Spokes - PURPLE

CLASSIC Spokes - RED
CLASSIC Spokes - RED

CLASSIC Spokes - SILVER
CLASSIC Spokes - SILVER

Using a Special Spoke Support Spacer (try n say that after a beer!) in the assembly of the MEGSTAR Hub you are able to fit TRAMPA's SUPERSTAR & MEGASTAR Wheels onto 8mm or 9mm Axles... Therefore they can fit any Longboard truck or for example Evolve, Enertion, Boosted and all these other small electric skateboards that are using smaller wheels etc...

What size Spoke Support Conversion Spacer do you need?
What size Spoke Support Conversion Spacer do you need?

REGULAR Spoke Support spacer - 12mm Axles
REGULAR Spoke Support spacer - 12mm Axles

OFF-SET Spoke Support conversion Spacer - 9.525mm Axels (+£5)
OFF-SET Spoke Support conversion Spacer - 9.525mm Axels (+£5)

CENTER-SET Spoke conversion Spacer - 8mm Axels (+£5)
CENTER-SET Spoke conversion Spacer - 8mm Axels (+£5)

OFF--SET Spoke conversion Spacer - 8mm Axels (+£5)
OFF--SET Spoke conversion Spacer - 8mm Axels (+£5)

Which Tyre do you want fitting?
Which Tyre do you want fitting?

8 Inch POWERPLAY Tyre
8 Inch POWERPLAY Tyre

8 Inch GO-KART Tyre
8 Inch GO-KART Tyre

9 Inch ROADIE Tyre
9 Inch ROADIE Tyre

9 Inch INLINE Tyre - BLACK
9 Inch INLINE Tyre - BLACK

9 Inch STRIKER Tyre - BLACK
9 Inch STRIKER Tyre - BLACK

9 Inch DIAMOND TREAD Tyre
9 Inch DIAMOND TREAD Tyre

9 Inch MUD-PLUGGER Tyre - BLACK
9 Inch MUD-PLUGGER Tyre - BLACK

9 Inch MUD-PLUGGER Tyre - BLUE
9 Inch MUD-PLUGGER Tyre - BLUE

9 Inch MUD-PLUGGER Tyre - GREY
9 Inch MUD-PLUGGER Tyre - GREY

9 Inch MUD-PLUGGER Tyre - RED
9 Inch MUD-PLUGGER Tyre - RED

Quantity required:
We have enough parts to make…  
RRP FROM £75 - per wheel

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon