This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

VESC 100/250

VESC 100/250
RRP
£400+

Introducing the amazing VESC® 100/250 Motor Controller.
The VESC® 100/250 is the 8th & very latest edition of speed controllers designed by Benjamin Vedder.

TRAMPA BOARDS LTD has teamed up with the internationally renowned 'YODA of electronics' (Benjamin Vedder) to bring to the world the most advance electronic speed controller ever to be produced! Benjamin's family name is Vedder & the V in the name VESC represents this. VEDDERs Electronic Speed Controller! There have been many ESC's before, but now the VESC officially exists. Benjamin is globally renowned for his incredible electronics and software skills. He has worked tirelessly for well over 7 years fine tuning preceding versions of the globally famous & Trade Marked VESC products & now after teaming up with TRAMPA BOARDS Ltd the development of the VESC SIX, VESC 75/300 & VESC 100/250  has been taken to it highest capability yet. The testing has been completed, with stunning results to boast about & to help us identify any technical and production problems.

The VESC 100/250 controller is being configured with the brand new Open Source, GPL V3 licensed VESC®-Tool Software:  www.vesc-project.com
The Open source, GPL V3 licensed VESC Firmwares will come pre-installed on the device, allowing us to do extra testing of the device, prior to shipping.
This is the GPL V3 license contract for your reference showing here on the Vesc-Project website 

The VESC 100/250 is the highest voltage & most impressive Electric Speed Controller Benjamin has ever envisioned! It is arguably by far the best general purpose Electronic Speed Controller the world has ever seen so far!! Hydrofoils, motorbikes, performance E-Biking, remote control of all kinds including autonomous vehicles & robotics and camera equipemnt (as well as thousands of industrial, scientific & recreational applications) are all about to be revolutionized by using the VESC series of products that will all come to the market soon...

Using the VESC 100/250 controller in your product  (regardless what it is) will allow you to add any battery delivering up to 100V of max peak voltage (e.g.22S Lithium + voltage spikes). This is the perfect limit to give you incredible performance from your battery driven electric motors. Using the new VESC TOOL Original (which you will get access to once you have made your purchase) or the VESC-App for Android, you will be able to fine tune your performances relevant to your application, while you will see all the real time data that the VESC computes and outputs. Speed, RPM, current consumtion, duty cycle,  battery capacity and state of charge, Wh consumtion and WH regen, estimated range, realtime data graph plotting etc.  Beautiful!  Even firmware updates and configuration can be done wirless now. 

The 100/250  features the following ports and outputs:

- Sensor port for motor sensors (ABI, HALL, AS5047p magnetic precission encoders)
- CAN Port for CAN communication with other devices and VESC arrays ( CAN and UAV CAN).
- PPM port to connect PPM tranccievers
- COMM port for various kinds of other communication methods like I2C, ADC, Uart, SPI. You can use your Arduino or RaspberryPi to control the VESC!
- SWD port to get direct access to the chipset. diagnostics, debugging, and real time data.
- AUX port to supply 12V and 5V to external devices.
- USB
- NRF52840 BLE wireless bridge

The VESC 100/250 controllers come fitted as standard with TRAMPA's very own & very special Silicone Coated & TRAMPA logo'd cables which are made up of 1036 Strands of Highly Flexible Top quality Copper. These quality details ensure the maximum performance at all times. Attached To the premium copper cables are three genuine Amass XT90 connectors on the battery side allowing you to push up to 300 battery Amps. Using multiple high quality silicone cables on the motor side ensures your power flows to the max. Thicker cables would be hard to bend and would consume more space than necessairy, while multiple smaller cables can be routed with ease to your phase wire connection point while keeping the housing as small as humanly possible.

The circuit board is installed with a custom Internal Silicone Part & is neatly fitted into the Heat Sink which is a Solid Block of CNC'd  T6 Aluminum which is used for dispensing the heat, offering maximum protection, allowing easy fitting and maximum good looks!The CNC'd 6061T6 Heat sink Box dissipates the excess heat that can be encountered when operating in flat out instances, thus keeping the Unit at a cool operating temperature whilst the CNC housing allows you to attach it to pretty much to anything for easy mounting and even more heat dissipatipn.

The performance of the VESC 100/250 controller, compared to preceding VESC models, is light years ahead! This is demonstrated in the cost, as cheap non effective copies are sold according to their price not their quality. If you want the best performance then stick to the original hardware source - it will save you a lot of money on the long run.

The 100/250  features the following ports and outputs:

- Sensor port for motor sensors (ABI, HALL, AS5047p magnetic precission encoders)
- CAN Port for CAN communication with other devices and VESC arrays ( CAN and UAV CAN).
- PPM port to connect PPM tranccievers
- COMM port for various kinds of other communication methods like I2C, ADC, Uart, SPI. You can use your Arduino or RaspberryPi to control the VESC!
- SWD port to get direct access to the chipset. diagnostics, debugging, and real time data.
- AUX port to supply 12V and 5V to external devices.
- USB
- NRF52840 BLE wireless bridge

The VESC 100/250 controllers come fitted as standard with TRAMPA's very own & very special Silicone Coated & TRAMPA logo'd cables which are made up of 1036 Strands of Highly Flexible Top quality Copper. These quality details ensure the maximum performance at all times. Attached To the premium copper cables are three genuine Amass XT90 connectors on the battery side allowing you to push up to 300 battery Amps. Using multiple high quality silicone cables on the motor side ensures your power flows to the max. Thicker cables would be hard to bend and would consume more space than necessairy, while multiple smaller cables can be routed with ease to your phase wire connection point while keeping the housing as small as humanly possible.

The circuit board is installed with a custom Internal Silicone Part & is neatly fitted into the Heat Sink which is a Solid Block of CNC'd  T6 Aluminum which is used for dispensing the heat, offering maximum protection, allowing easy fitting and maximum good looks!The CNC'd 6061T6 Heat sink Box dissipates the excess heat that can be encountered when operating in flat out instances, thus keeping the Unit at a cool operating temperature whilst the CNC housing allows you to attach it to pretty much to anything for easy mounting and even more heat dissipatipn.

The performance of the VESC 100/250 controller, compared to preceding VESC models, is light years ahead! This is demonstrated in the cost, as cheap non effective copies are sold according to their price not their quality. If you want the best performance then stick to the original hardware source - it will save you a lot of money on the long run.

Weight: 500g
This product cannot be purchased on its own.
menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon