This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

PRIMO 3 Spoke Composite Hub 3.75/4x 2.5 Inch - Perfect for 9 inch tyres

PRIMO 3 Spoke Composite Hub 3.75/4x 2.5 Inch - Perfect for 9 inch tyres PRIMO 3 Spoke Composite Hub 3.75/4x 2.5 Inch - Perfect for 9 inch tyres PRIMO 3 Spoke Composite Hub 3.75/4x 2.5 Inch - Perfect for 9 inch tyres PRIMO 3 spoke Hub - Fits the 9 inch stiker tyre M6 x 30mm Socket Capped Allen-Key Bolt for primo hub - Marine Grade Stainless steel M6 Nut - Marine Grade Stainless steel Nylock Nut - Fixes Bindings & Trucks to Deck
RRP FROM
£15+

PRIMO's 3 Spoke Composite Hub has a center set bearing position & because of its special '3.75/4 Inch Rim' means it is capable of fitting both 3.75 Inch Rim Tyres (8 Inch Tyres) & 4 Inch Rim Tyres (9 inch Tyres). 

 The 3 Spoke PRIMO hubs are assembled using just 3 heavy duty M6 x 30mm Stainless Steel Socket capped Bolts & M6 Nylock nuts. The Composite hub is very Strong but a bit Chunky. IMO its best fitted with 9 Inch Tyres or Any tyre using a 4 inch Rim.

Because of the extra size of this hub it is strong ebough for many applicatuons. When comparing the weight to the super slim design of the PHATLADS hubs (weighing just 184g), the PRIMO 3 Spoke hub weighing 282g does weigh in a little on the heavy side, but the 3 spoke'd solid structure is a timeless classic with an awesome reputation for not letting you down & is currently the only option hub that TRAMPA offers should you wish to mount 'Center-Set 9 inch Wheels'

Although slightly tighter to fit into than other hubs, TRAMPA's regular 28mm Bearings will fit perfectly into the Bearing housing of the PRIMO hub. As a top tip place the bearings in the freezer for 30 minutes before inserting them into the hub, the cold will cause the metal of the bearing to shrink & fit easier into the hub!

To fit the PRIMO 3 spoke hubs onto the TRAMPA TRUCKS you will need a special 12x 9.5mm Axle Spacer to allow the hub to position onto the axle correctly.

Bearings can be purchased at a discounted price when purchased with Hubs.

M6 x 30mm Socket Capped Allen-Key Bolt for primo hub - Marine Grade Stainless steel

TRAMPA's M6 x 30mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This Bolt is used to assemble the PRIMO 3 Spoke Hubs. The socket capped head of the Bolt screws neatly though the HUB eventually screwing into the Marine Grade Stainless Steel M6 Nylock Nut on the other side of the hub. 

Weighing just 8 grams each, these Bolts are lightweight, look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers nuts & bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

You’ll will need a 5mm Allen Key  to tighten & loosen the Bolt from the nut. Ensure all your Nuts & Bolts are tight before riding!

M6 Nut - Marine Grade Stainless steel Nylock Nut - Fixes Bindings & Trucks to Deck

Introducing TRAMPA's M6 (6mm Thread) A4 Grade Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M6 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M6 Bolts that hold the TRUCKS to the DECK for the HOLYPRO Decks & also for the countersunk bolts connecting the L BRACKETS TO the DECKs. Use an 10mm spanner or SOCKET for a Ratchet Driver to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

PRIMO 3 spoke Hub - Fits the 9 inch stiker tyre

PRIMO's 3 Spoke Composite Hub has a center set bearing position & because of its special '3.75/4 Inch Rim' means it is capable of fitting both 3.75 Inch Rim Tyres (8 Inch Tyres) & 4 Inch Rim Tyres (9 inch Tyres). 

 The 3 Spoke PRIMO hubs are assembled using just 3 heavy duty M6 x 30mm Stainless Steel Socket capped Bolts & M6 Nylock nuts. The Composite hub is very Strong but a bit Chunky. IMO its best fitted with 9 Inch Tyres or Any tyre using a 4 inch Rim.

Because of the extra size of this hub it is strong ebough for many applicatuons. When comparing the weight to the super slim design of the PHATLADS hubs (weighing just 184g), the PRIMO 3 Spoke hub weighing 282g does weigh in a little on the heavy side, but the 3 spoke'd solid structure is a timeless classic with an awesome reputation for not letting you down & is currently the only option hub that TRAMPA offers should you wish to mount 'Center-Set 9 inch Wheels'

Although slightly tighter to fit into than other hubs, TRAMPA's regular 28mm Bearings will fit perfectly into the Bearing housing of the PRIMO hub. As a top tip place the bearings in the freezer for 30 minutes before inserting them into the hub, the cold will cause the metal of the bearing to shrink & fit easier into the hub!

To fit the PRIMO 3 spoke hubs onto the TRAMPA TRUCKS you will need a special 12x 9.5mm Axle Spacer to allow the hub to position onto the axle correctly.

Bearings can be purchased at a discounted price when purchased with Hubs.

PRIMO's 3 Spoke Composite Hub has a center set bearing position & because of its special '3.75/4 Inch Rim' means it is capable of fitting both 3.75 Inch Rim Tyres (8 Inch Tyres) & 4 Inch Rim Tyres (9 inch Tyres). 

 The 3 Spoke PRIMO hubs are assembled using just 3 heavy duty M6 x 30mm Stainless Steel Socket capped Bolts & M6 Nylock nuts. The Composite hub is very Strong but a bit Chunky. IMO its best fitted with 9 Inch Tyres or Any tyre using a 4 inch Rim.

Because of the extra size of this hub it is strong ebough for many applicatuons. When comparing the weight to the super slim design of the PHATLADS hubs (weighing just 184g), the PRIMO 3 Spoke hub weighing 282g does weigh in a little on the heavy side, but the 3 spoke'd solid structure is a timeless classic with an awesome reputation for not letting you down & is currently the only option hub that TRAMPA offers should you wish to mount 'Center-Set 9 inch Wheels'

Although slightly tighter to fit into than other hubs, TRAMPA's regular 28mm Bearings will fit perfectly into the Bearing housing of the PRIMO hub. As a top tip place the bearings in the freezer for 30 minutes before inserting them into the hub, the cold will cause the metal of the bearing to shrink & fit easier into the hub!

To fit the PRIMO 3 spoke hubs onto the TRAMPA TRUCKS you will need a special 12x 9.5mm Axle Spacer to allow the hub to position onto the axle correctly.

Bearings can be purchased at a discounted price when purchased with Hubs.
 

Rim Diameter    3.75 & 4 Inch
Rim Width         2.5 Inch
​Fits Tyres with   3.75 Inch & 4 Inch Rims 
The 3 Spoke PRIMO Hub is an old Skool Classic! Measuring 2.5 inches wide, its capable of fitting all the 8 inch tyres but much more suitably the 9 Inch Tyres.

--------------------------------------------------------------
When you purchase this hub, you get the following parts....
1x PRIMO 3 spoke Hub - Fits the 9 inch stiker tyre
3x M6 x 30 Socket cap Allen-Key Stainless Steel Bolt
3x M6 Nut - Marine Grade Stainless steel Nylock nut
The Primo 3 Spoke Hub uses 6001-2RS 12x28x8mm Mountain Board Bearings to connect to 12 Inch Axles 

Weight: 300g

If you purchase bearings with your hubs or wheels, then you will be given the correct size & quantity Internal Bearing Support Spacer & Rubber O-Ring to match the number wheels you purchase.

Do you wish to purchase some discounted priced Bearings with your Hub?
Do you wish to purchase some discounted priced Bearings with your Hub?

NO Bearings Thanks

2x BLACK Abec 5 ATB Bearings & Spacers - 12mm Axles (+£4)
2x BLACK Abec 5 ATB Bearings & Spacers - 12mm Axles (+£4)

2x BLUE Abec 5 ATB Bearings & Spacers - 12mm Axles (+£4)
2x BLUE Abec 5 ATB Bearings & Spacers - 12mm Axles (+£4)

2x RED Abec 5 ATB Bearings & Spacers - 12mm Axles (+£4)
2x RED Abec 5 ATB Bearings & Spacers - 12mm Axles (+£4)

2x GREEN CERAMIC ATB Bearings & Spacers - 12mm Axles (+£10)
2x GREEN CERAMIC ATB Bearings & Spacers - 12mm Axles (+£10)

Quantity required:
We have enough parts to make…  
RRP FROM £15 - per hub

Excluding VAT
HCC: 8714930090

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon