This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

Gloss BLACK HYPA HUB -Including Marine Grade Stainless Steel Nuts & Bolts

Gloss BLACK HYPA HUB -Including Marine Grade Stainless Steel Nuts & Bolts BLACK Gloss HYPA Hub M4 x 35mm Socket Capped Bolt - Marine Grade Stainless steel with locking paste M4 Nyloc Nut - Marine Grade stainless steel Nylock Nut - Hub Nuts
RRP
£12.50
exc tax

TRAMPA's 6 spoke HYPA Hub is by far the sexiest, as well as being the strongest, 3.75-inch hub on the market today!

The HYPA hubs 6 spoke design is technically advanced & is manufactured using original Du-Pont materials & the very latest in precision injection molding machinary - No quality expense is spared!  This delux combination of technical design, top quality machinary & original genuine materials, creates a product that is far superior to all of our competitiors, resulting in performance that is well beyond normal expectations. This extra performnce means the TRAMPA HYPA hub can handle much higher than recommended tyre inflation pressures, generting substantially higer than normal roll speeds. During testing our crash test dummies (i mean the Team riders) commonly rode with these hubs well above 80psi & beyond.... When resting at the top of the mountain we measued Joels pressure at 110psi! (110 psi is not recommended!)

The HYPA hubs are held together using only the best Marine Grade (A4) Stainless steel Nuts & Bolts so they definitly wont rust on you (EVER) & are therfore perfect for bad conditions. All the Bolts used by TRAMPA have been dipped in a special Blue Locking Paste & all the Nuts are fitted with the world renowned Nylon "Nylock" Nut locking System, all these no expense spared small details ensure you get the absolute best hub possible!

HYPA hubs are available in loads of different colours & surface finishes, all of which are TRAMPA embossed between the spokes proving the top quality! Do not buy imitations as they will not perform the same!  TRAMPA’s own high class Steel Bearings, (Genuine  ABEC 5 rated Bearings) push perfectly into the HYPA hub bearing housing, guaranteeing the fastest spin rate to the wheel possible. Use either Bearing reducer sleeves into 12mm Bearings or use TRAMPA's 10mm Bearings to fit the HYPA hubs onto 9.52mm skate axles. HYPA hubs are compatible with all known 8-inch tyres currently on the market including MBS & Scrub. Put quite simply – HYPA hubs are by the Best!

Along with many other applications that these wheels will fit too, the HYPA hub will fit and accept ALL the other brands of mountainboards on the market including MBS, SCRUB & KHEO, so when you are looking for an upgrade to your ride you know where too look! Basically the HYPA will fit to anything that uses a Imperial 7/16ths (9.52mm) or 12mm bearings to fit onto the axle. If you already have your own 12mm bearings there are conversion spacers available to convert your 12mm bearings to work on the 7/16ths Imperial (9.52mm) skate axles and a different size spacer to convert them to fit 10mm (metric) scooter axles (see associated parts for details).

Bearings are supplied at a discounted price when purchased with hubs... TRAMPA ABEC 5 Bearings are normally £1.88 each (£15 per set of 8) but when they are purchased with a set of hubs they work out at only £1.25 each which is only £10 per set of 8 bearings when purchased with hub set) giving you a £5 Saving per set!

M4 x 35mm Socket Capped Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 35mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This Bolt is used to assemble the TRAMPA HYPA HUBS. The socket capped head of the Bolt fits neatly into the Bolt housing of the HYPA HUB marrying into the M4 nut located in the housing on the other side of the hub.

Weighing just 3 grams each these bolts are very lightweight. They look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

You will need a 3mm Allen Key to tighten & loosen the Nuts & Bolts from the hub. Ensure all your Nuts & Bolts are tight before riding!

BLACK Gloss HYPA Hub

TRAMPA's 6 spoke HYPA Hub is the lightest, strongest injection moulded 8 inch hub / wheel on the market today. Produced using original DuPont ingredients & the very latest in injection moulding machinery, no quality expense is spared!! HYPA Hubs are so strong, during testing our Crash Test Dummies (i mean the Team Riders) frequently inflated their HYPA wheels well beyond 75psi with no problems to report!

HYPA Hubs are available in loads of coordinating colours all of which are TRAMPA embossed proving our top quality, so to avoid disappointment dont go buying imitations! Our top quality continues as the HYPA Hubs construction uses A4 (Marine Grade) Stainless Steel Nuts & Bolts which are guaranteed never to rust.

HYPA Hubs are compatible with all known 8 Inch Tyres on the market today.

TRAMPA’s very own & genuine ABEC rated Bearings push perfectly into the HYPA Hub, guaranteeing the fastest spin rate possible. Use 12mm bearings (12x28x8mm) for 12mm axles or you can use Bearing Reducer Sleeves to fit your existing 12mm bearings onto 10mm axles (9.52mm or 7/16ths inch axles). 9.52x28x8mm bearings also fit TRAMPA hubs to 9.52mm Skate Axles.

Bearings are supplied at a discounted price when purchased with a set of hubs...
2 x Bearings cost only £2.50 x 4 = £10 per set of 8 making a £5 saving per set!

M4 Nyloc Nut - Marine Grade stainless steel Nylock Nut - Hub Nuts

Introducing TRAMPA's M4 (4mm Shaft) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M4 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to tighten to the M4 Socket Capped Bolts that hold the HYPA & SUPERSTAR hubs together. To fit the nuts M4 use an 8mm spanner or  8mm Ratchet Socket to turn the Nut onto the Bolt whilst holding the bolt with a 3mm Allen Key. Always ensure your Nuts & Bolts are tight before you ride!

The following are required to build this product:

 

TRAMPA's 6 spoke HYPA Hub is the lightest & strongest Injection Moulded hub on the market today. Its produced using original Du-Pont ingredients & the very latest in injection molding machinery, no quality expense is spared!!

HYPA HUBS are so strong that during testing Crash Test Dummies i mean the Team Riders, frequently inflated their HYPA WHEELS well beyond recomended inflation pressures with no problems to report!

HYPA Hubs are available in loads of coordinating colours all of which are TRAMPA embossed proving our top quality. To avoid disappointment dont buy imitations! TRAMPA quality continues as the HYPA Hubs construction uses A4 Grade (Marine Grade) Stainless Steel Nuts & Bolts, they are Guaranteed never to rust!

HYPA Hubs are compatible with all known 7 Inch Tyres & 8 Inch Tyres on the market today. TRAMPA’s very own & genuine ABEC rated Bearings push perfectly into the HYPA HUB, guaranteeing the fastest spin rate possible. Use 12mm bearings (12x28x8mm) for 12mm axles or you can use Bearing Reducer Sleeves to fit your existing 12mm bearings onto 10mm axles (9.52mm or 7/16ths inch axles). 9.52x28x8mm bearings also fit TRAMPA hubs to 9.52mm Skate Axles.

Bearings are supplied at a discounted price when purchased with hubs...
Bearings cost just £2.50 per wheel making a set of 8 Bearings just £10 per set

When you purchase this hub, you get the following parts....
1x BLACK Gloss HYPA Hub
6x M4 x 35mm Marine Grade Stainless steel Socket Capped Bolt
6x M4 Nut - Marine Grade Stainless steel Nylock Nut
Fits all 125mm - 8 inch Tyres
Use a 3mm Allen Key to tighten the Socket Capped Bolts into the M4 Nuts. When tightening the bolts into the nuts tighten the nuts progressively & equally.
Do not overtighten the Bolt or the nut will spin in its housing!
Weight: 150g

If you purchase bearings with the wheels, then you will be given the correct size & quantity Internal Bearing Support Spacers & Rubber O-Rings to match the number wheels you purchase.

Do you require some Bearings & Spacers?
Do you require some Bearings & Spacers?

BLACK 6001-2RS Mountainboard Bearings 12mm Axle (+£5)
BLACK 6001-2RS Mountainboard Bearings 12mm Axle (+£5)

BLUE 6001-2RS Mountainboard Bearings 12mm Axle (+£5)
BLUE 6001-2RS Mountainboard Bearings 12mm Axle (+£5)

RED 6001-2RS Mountainboard Bearings 12mm Axle (+£5)
RED 6001-2RS Mountainboard Bearings 12mm Axle (+£5)

CERAMIC 6001-2RS Mountainboard Bearings 12mm Axle (+£12.50)
CERAMIC 6001-2RS Mountainboard Bearings 12mm Axle (+£12.50)

BLUE 12mm MTB Bearings & Reducers 9.525mm Axles (+£7.50)
BLUE 12mm MTB Bearings & Reducers 9.525mm Axles (+£7.50)

RED 12mm MTB Bearings & Reducers 9.525mm Axles (+£7.50)
RED 12mm MTB Bearings & Reducers 9.525mm Axles  (+£7.50)

GREEN CERAMIC MTB Bearings & Reducers 9.525mm Axles (+£15)
GREEN CERAMIC MTB Bearings & Reducers 9.525mm Axles (+£15)

RED 9.525x28mm MTB Bearings - 9.525mm Axles (+£3)
RED 9.525x28mm MTB Bearings - 9.525mm Axles (+£3)

BLACK 12mm MTB Bearings & Reducers 9.525mm Axles (+£7.50)
BLACK 12mm MTB Bearings & Reducers 9.525mm Axles (+£7.50)

NO Bearings required Thanks

Quantity required:
We have enough parts to make…  
RRP £12.50 - per hub

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon