This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

TRAMPA 35° 9/73 BIG-BOI Mountainboard Deck with WINGS - WINGS give safe cable routing, adds W Shaped concave & the increase the width of the deck from 9 to 10 Inches

TRAMPA 35° 9/73 BIG-BOI Mountainboard Deck with WINGS - WINGS give safe cable routing, adds W Shaped concave & the increase the width of the deck from 9 to 10 Inches 35° 9/73 TRAMPA BigBoi Mountainboard Deck - Fix the WINGS to the deck to add concave & the increase the width of the deck Complete deck Drillage edging and sanding TRAMPA's Deck Widening, Cable routing W-Shaped Concaved WINGS - Complete Set for 1x Deck Bindings Bolt Kit M6x35 Countersunk Bolt Kit 16/17ply to fit Bindings to the deck when using WINGS M6 Marine Grade Stainless Steel Countersunk Binding Bolt Kit 2WD FRONT Truck Mounting Kit Complete Deck TRAMPA Handmade VINYL Sticker Kit
RRP
£235+
schematic

 

 

TRAMPA WING for MOUNTAINBOARDS will widen your deck, stiffen the flex, route the cables and increase your overall performance!! 1x Naked Wing, you need 2 Wings per Deck!!

Injection moulded Riser pad, with a foot-hugging W Shaped concave & integrated cable routing channels.

•By widening the deck, & adding extra leverage beneath the toes & heels, which gives you more control of board.

•Channels on the underside allow for under-foot cable routing from the battery boxes to the Motors.

•W-shape helps to relieve foot ache. 

 

Specifically designed to fit the NEW 9-69 & 9-73 Mountainboard decks, TRAMPA WINGS can also be fitted to ALL TRAMPA Mountainboards(Some modifications to deck pre-summer 2021 shape may required modification)

 

TRAMPA LOGO Truck Bolt Mounting Panel / Anti-Sink Plate / Cable Tidy

Organise cables with this high-quality carbon Cable tidy.

With M5 holes spaced for mounting over the trucks, these cable tidys are perfect for anyone using non-electric deck, and have cables running over the top of their deck. Used with the M5 coloured spacers

 

1x 10 Inch squares of Top Quality Jessup Grip tape

Mega Grippy & really easy to apply. Ensure the decks surface is clean & dry before application. Easy to custom shape, simply draw your shape on the back & cut out with Scissors or sharp knife. Remember to use a ruler for clean edges.

 

 

M5 x 25mm TORX Countersunk Bolt

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M6 x 35mm TORX Countersunk Bolt Stainless Steel

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M6 x 35mm TORX Countersunk Bolt Stainless Steel

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M3.5 x 12 PAN Headed TORX Bolt. - Used to secure the WINGS to the TRAMPA Deck

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M5 Nut - Marine Grade Stainless steel Nylock Nut - Fixes to Trucks & Bindings

Introducing TRAMPA's M5 (5mm Thread) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M5 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M5 Bolts that hold the TRUCKS to the DECK for all  Decks & also for the Dome Head Bolts connecting the L BRACKETS to the BindingsUse an 8mm spanner or Ratchet Drive to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

M6 Nut - Marine Grade Stainless steel Nylock Nut - Fixes Bindings & Trucks to Deck

Introducing TRAMPA's M6 (6mm Thread) A4 Grade Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M6 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M6 Bolts that hold the TRUCKS to the DECK for the HOLYPRO Decks & also for the countersunk bolts connecting the L BRACKETS TO the DECKs. Use an 10mm spanner or SOCKET for a Ratchet Driver to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

M6 Nut - Marine Grade Stainless steel Nylock Nut - Fixes Bindings & Trucks to Deck

Introducing TRAMPA's M6 (6mm Thread) A4 Grade Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M6 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M6 Bolts that hold the TRUCKS to the DECK for the HOLYPRO Decks & also for the countersunk bolts connecting the L BRACKETS TO the DECKs. Use an 10mm spanner or SOCKET for a Ratchet Driver to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

M5 COUNTERSUNK Washer Anodised

M5 Countersink Washer great way to pimp and customise your board in 10 differnt colours used in conjunction with all our M5 Countersunk bolts great way to finish off your board/project

130mm - Hand made TRAMPA Vinyl Sticker

Everybody loves stickers, especially TRAMPA VINYL stickers! TRAMPA vinyl's are pain-stakingly hand made at TRAMPA HQ using the absolute finest Vinyl material available! So long as the area it is to be stuck to is clean the Vinyl we use is guaranteed to stick well & not fade for well over 5 years. These BLUE vinyl stickers are sized to fit onto the top of the Trampa deck, the dimensions are 130mm long x 28mm high.

There are loads of colours to choose from and the price starts at just 30 pence each - so custom pimping your deck, car, van, boat, bedroom window or any other surface you can think of that would benefit with a TRAMPA logo slapped on it is really easy & cheap to do... Help TRAMPA the world with the Pimp-est vinyl stickers EVER!

To Apply - Ensure the surface is clean & grease free before applying the sticker. Peel the thick side away from the Masking tape so the sticker appears in reverse (negative) and simply lay the masking tape onto the surface in question. Using your fingers or a soft cloth, rub the masking tape, forcing any air out of the vinyl & allowing the vinyl to stick well. Then gently peel away the masking tape to reveal the Vinly. This VIDEO may help...

Everybody loves stickers, especially TRAMPA stickers! TRAMPA's Old Skool VINYL Stickers are pain-stakingly Hand Made at the TRAMPA HQ using the absolute finest Vinyl material available! So long as the area it is to be stuck to is clean the Vinyl we use is guaranteed to stick well & not fade for well over 5 years and most likely much longer! These BLUE Vinyl Stickers are sized to fit underneath the TRAMPA deck, the dimensions are 370mm long x 70mm high.

There are loads of colours to choose from & the price starts at just £2.50 each - so custom pimping your deck, car, van, boat, bedroom window or any other surface you can think of that would benefit with a TRAMPA logo slapped on it is really easy & cheap and easy to do...

Help TRAMPA the world with the Pimp-est vinyl stickers EVER! To Apply the Stickers - Ensure the surface you re applying too is clean & grease free before applying the sticker. Peel the thick side away from the Masking tape so the sticker appears in reverse (negative) and simply lay the masking tape onto the surface in question. Using your fingers or a soft cloth, rub the masking tape, forcing any air out of the vinyl & allowing the vinyl to stick well. Then gently peel away the masking tape to reveal the Vinly.

580mm - Hand made TRAMPA Vinyl Sticker

.

Recommended decks

Rider's weight Suggested deck Deck Weight Flex
70 - 89 kg
(11 - 14 stone)
16 ply 4,048g firm
76 - 102 kg
(12 - 16 stone)
17 ply 4,248g stiff
83 - 159 kg
(13 - 25 stone)
18 ply 4,448g very stiff
DECK WEIGHTS INCLUDE ALL HARDWARE & DECK ACCESSORIES


TRAMPA's 35° 9-73 Mountain Board Deck 

• Deck can be used for all disciplines of mountainboarding, but is best suited to long distance and off-piste freeride. 

• Different flex rates, 16ply is the most flexible, 18ply is the stiffest.  

• Designed to accommodate the taller person stance. 

 

In this Purchase you get the following items & services...
1x 35° 9/73 TRAMPA BigBoi Mountainboard Deck
1x Complete deck Drillage, Edging Filing & Sanding
2x TRAMPA WING for MOUNTAINBOARDS - Naked
28x M3.5 x 12 PAN Headed TORX Bolt. - WINGS
8x M6 x 35 Countersunk TORX Bolt
8x M6 Nut - Marine Grade Stainless steel Nylock nut
8x M6 Washer Form C - Marine Grade Stainless Steel
2x 1x 10x10 Inch square Jessup Grip Tape
8x M6 x 35 Countersunk TORX Bolt
8x M6 Nut - Marine Grade Stainless steel Nylock nut
8x M6 Washer Form C - Marine Grade Stainless Steel
4x TRAMPA LOGO Truck Bolt Mounting Panel / Anti-Sink Plate / Cable Tidy
8x M5 COUNTERSUNK Washer Anodised
8x M5 x 25 Countersunk TORX Bolt
8x M5 Nut - Marine Grade Stainless steel Nylock Nut
2x 130mm - Hand made TRAMPA Vinyl Sticker
1x 580mm - Hand made TRAMPA Vinyl Sticker
Please select what ply deck you would like
Please select what ply deck you would like

16ply 9/73 BigBoi BigBoi WING Deck - FIRM

17ply 9/73 BigBoi WING Deck - STIFF
17ply 9/73 BigBoi WING Deck - STIFF

18ply 9/73 BigBoi WING Deck - STIFFEST
18ply 9/73 BigBoi WING Deck - STIFFEST

What colour LED Power Switch do you want in your Monster Box?
What colour LED Power Switch do you want in your Monster Box?

BLUE Power Switch
BLUE Power Switch

GREEN Power Switch
GREEN Power Switch

PINK Power Switch
PINK Power Switch

RED Power Switch
RED Power Switch

WHITE Power Switch
WHITE Power Switch

YELLOW Power Switch
YELLOW Power Switch

What colour Inspection Pit Thumb Screw do you want
What colour Inspection Pit Thumb Screw do you want

Inspection Pit Thumb Screw - BLACK
Inspection Pit Thumb Screw - BLACK

Inspection Pit Thumb Screw - BLUE
Inspection Pit Thumb Screw - BLUE

Inspection Pit Thumb Screw - BRONZE
Inspection Pit Thumb Screw - BRONZE

Inspection Pit Thumb Screw - GOLD
Inspection Pit Thumb Screw - GOLD

Inspection Pit Thumb Screw - GREEN
Inspection Pit Thumb Screw - GREEN

Inspection Pit Thumb Screw - GUNMETAL
Inspection Pit Thumb Screw - GUNMETAL

Inspection Pit Thumb Screw - PINK
Inspection Pit Thumb Screw - PINK

Inspection Pit Thumb Screw - PURPLE
Inspection Pit Thumb Screw - PURPLE

Inspection Pit Thumb Screw - RED
Inspection Pit Thumb Screw - RED

Inspection Pit Thumb Screw - SILVER
Inspection Pit Thumb Screw - SILVER

Do you want to add a 21700 Cell Pack with integrated BMS? ?
Do you want to add a 21700 Cell Pack with integrated BMS? ?

Please Supply a Cable Kit to install 2x Li-Po Cells - Cells Not included(+£2)
Please Supply a Cable Kit to install 2x Li-Po Cells - Cells Not included(+£2)

Please supply a 21700 CELL PACK - Cells Not included(+£375) - OUT OF STOCK
Please supply a 21700 CELL PACK - Cells Not included(+£375) - OUT OF STOCK

No Cell Pack Thanks

Roughly speaking, taking all matters into consieration is fair to say that roughly speaking 1Ah (1000mAh) of battery on a TRAMPA Mountainboard is loosely equal to 1 Mile of range. some get more some get less.

Using the classic MONSTER Box & a simple 12s Battery Harness, you can connect 2x 6s 22Ah Li-Po cells to make a single 12s1p pack, therefore 22Ah is approx 22 Miles of Range. 
Alternatively, using TRAMPA's 21Ah 18650 SOLDER-LESS Battery Pack you can self assemble your own battery & squeeze in 84x 18650 3Ah cells to give yourself a first of its kind, a service-able 12s7p battery pack which will give you a total of 21Ah, so approx 21 Mile Range. 
The Classic Monster box should easy see 20 miles of 'good thrash' riding range for an average sized adult, which for most riders is more than enough... 
BUT! For some guys, 20 miles is no way nearly enough & so using the MASSIVE MONSTER Box, (Which is larger & only works in conjunction with the BigBoi Decks) is specially made to fit one of TRAMPA's 35Ah Self Assenbly Cell Packs. The Pack comes with an integrated BMS for Charging & will fit 84x 21700 5A cells (12s7p) so you can build yourself a serviceable 35Ah
21700 SOLDER-LESS Battery Pack which in good conditions and the right rider will easy achieve 35+ Miles range....! Oh Yeah baby!! 
 

Do you want to add a 18650 Cell Pack or Cables to fit a 12s Li-Po Pack?
Do you want to add a 18650 Cell Pack or Cables to fit a 12s Li-Po Pack?

Supply a 12s Cable kit for 2x 6s Li-Po Cells - Cells Not included(+£25)
Supply a 12s Cable kit for 2x 6s Li-Po Cells - Cells Not included(+£25)

Supply a 18650 CELL PACK - Cells Not included (+£325)
Supply a 18650 CELL PACK - Cells Not included (+£325)

No Cable Kit or Cell Pack required thanks

What colour stickers would you like ?
What colour stickers would you like ?

SILVER Vinyl Stickers
SILVER Vinyl Stickers

BLUE Vinyl Stickers - OUT OF STOCK
BLUE Vinyl Stickers  - OUT OF STOCK

RED Vinyl Stickers
RED Vinyl Stickers

WHITE Vinyl Stickers
WHITE Vinyl Stickers

Quantity required:
We have enough parts to make…  
RRP £235 - per deck

Excluding VAT
HCC: 6815120000

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon