This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

35° 9/69 TRAMPA 4WD-E WING Deck - Fix the WINGS to the deck to add W-Shape concave & the increase the width of the deck

35° 9/69 TRAMPA 4WD-E WING Deck - Fix the WINGS to the deck to add W-Shape concave & the increase the width of the deck TRAMPA WINGS - Complete Set
RRP
£250
exc tax
schematic

flexometer

 


TRAMPA’s famous range of indestructible Decks are unlike anything else on the market. Tailored to a riders' weight, height & ability – TRAMPA DECKS give unrivaled responsiveness & confidence in the board when riding.

Created to replace dull unresponsive wooden decks & reinvent the off-road riding experience, TRAMPA decks bring a whole new riding-experience. With insane ‘pop’ & shock-absorbing flex, TRAMPA decks are the #1 choice for freestyle riding & comfortable cruising.  

Made using a secret re-enforced glass & plastic thermo composite (originally developed for light-weight military applications), TRAMPA decks are indestructible. In all the years of excessive & harsh testing - pushing the decks to their limits (inside & out of intended applications) - there has never ever been a single break & we give you a guarantee for life that you will never break one!

TRAMPA decks are measured in “Ply”, referring to how many layers of ‘secret-composite’ are used when making the deck. A lower ply deck will be flexi-er & lighter than a higher-ply one. Generally we recommend higher ply decks for heavier riders, and lower for lighter riders – but flex, pop, and stiffness are all a matter of taste. Our Ply-ratings range from 11 - 18 in various lengths & shapes – meaning there’s a perfect TRAMPA deck for everyone!

TRAMPA decks have 35°, 15° or 0° Truck Mounting Angles, in order to work with the various steering systems used across different applications.
35° Decks – Work in perfect harmony with TRAMPA’s amazing Spring Trucks – a highly tuneable steering system designed give optimal responsiveness at 35°.
15° Decks – Fit to ATB Skate Trucks – a lightweight & cheaper steering system, perfect for lighter riders & kiteboarders.
0° Deck – Our ORRSOM Longboard Deck uses a special split-tip that allows 12FIFTIES Longboard trucks to be mounted at 3 different heights. 


How are they made?

The TRAMPA™ deck is made from a re-enforced glass and plastic thermo composite. Chosen because it gives a superior strength-to-weight ratio, whilst (unlike carbon fibre) remaining flexible. It is able to withstand huge impacts, forces and flex's that would shatter other materials.

Specially formulated, and presented in a thread like format, just like cotton. From there, it’s woven to our desired width, and placed it onto a roll. Pre-shaped, polished-aluminium moulds are used to give the material the dimensions and surface quality we require – this is where we vary the layer quantity of the composite in the mould, & control the amount of flex and pop in the resulting deck, giving us our Ply Ratings.

A special seal is used to create a high-pressured vacuum, then mould is then placed in a special oven to cook for about 2 hours. As the air is sucked out, the heated material becomes fluid – then at the crucial moment heating is turned off and the moulds are cooled, resulting in one solid piece! The decks are then cut out using a high-pressure water-cutter, resulting in a razor sharp finish to the edge of the deck.

The decks are then finished by hand. The binding and grab handle fixing holes are measured and drilled by hand, Metal files are used to take away the sharp edge of the deck and they are then rubbed smooth with a block and various grades of sandpaper.


TRAMPA are happy to announce that we can now offer CUSTOM PAINT JOBS on our decks. We’ve been releasing our parts in an amazing selection of colours - and now it’s time we offer the deck to match!

We’re luckily sited next to an awesome car spray shop, which are happy to take on some of our decks and make them shine! They know their paint, and know techniques for making any colour pop, without adding too much weight to the finished deck - guaranteeing a perfect & even finish that’ll last for years.

We’ve got a wide range of colours for you to pick and choose from, or you can send over a pantone of your own and we’ll match it the best we can!

Custom Sprayed Decks costs £100 extra, and should be ready to ship two weeks from your order.



 


 

TRAMPA’s famous range of indestructible Decks are unlike anything else on the market. Tailored to a riders' weight, height & ability – TRAMPA DECKS give unrivaled responsiveness & confidence in the board when riding.

Created to replace dull unresponsive wooden decks & reinvent the off-road riding experience, TRAMPA decks bring a whole new riding-experience. With insane ‘pop’ & shock-absorbing flex, TRAMPA decks are the #1 choice for freestyle riding & comfortable cruising.  

Made using a secret re-enforced glass and plastic composite (originally developed for light-weight military applications), TRAMPA decks are indestructible. In 17 years of excessive & harsh testing - pushing the decks to their limits (inside & out of intended applications) - there has never been a single break!

TRAMPA decks are measured in “Ply”, referring to how many layers of ‘secret-composite’ are used when making the deck. A lower ply deck will be flexi-er & lighter than a higher-ply one. Generally we recommend higher ply decks for heavier riders, and lower for lighter riders – but flex, pop, and stiffness are all a matter of taste. Our Ply-ratings range from 11 - 18 in various lengths & shapes – meaning there’s a perfect TRAMPA deck for everyone!

TRAMPA decks have 35°, 15° or 0° Truck Mounting Angles, in order to work with the various steering systems used across different applications.
35° Decks – Work in perfect harmony with TRAMPA’s amazing Spring Trucks – a highly tuneable steering system designed give optimal responsiveness at 35°.
15° Decks – Fit to ATB Skate Trucks – a lightweight & cheaper steering system, perfect for lighter riders & kiteboarders.
0° Deck – Our ORRSOM Longboard Deck uses a special split-tip that allows 12FIFTIES Longboard trucks to be mounted at 3 different heights. 

M6 x 35mm Countersunk Allen Key Allen-Key Bolt - Marine Grade Stainless steel with locking paste

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M5 x 40mm Regular Hex Head Bolt - Marine Grade stainless steel with locking paste

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

You’ll need 8 of the TRAMPA M5 x 40mm Marine Grade Stainless Steel Bolts and 8 of the TRAMPA M5 Stainless Steel Nylock Nuts to attach a pair of TRAMPA Skate Trucks to any TRAMPA Deck with Risers. You’ll also need a pair of 8mm ring spanners to tighten & loosen the Nuts & Bolts. Don’t forget to make sure you’re nuts and bolts are tight before you ride!

M3.5 x 12 EJOT Bolt. TORX PAN Headed Used to secure the Motor PROTECTION COVERS fitting to SPUR GEAR DRIVE Motor Mounts, this bolt cuts its own thread!!!

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

Brake disk support spacer - fits between the spoke and the disk - part E

BRAKE DISK SUPPORT DISK - This little spacer fits perfectly between the spoke and the brake disk. It gives the perfect space to avoid over heating the tyre & to allow good ventilation to keep your brake system cool and effective.

These spacers can be purchased as sets in brake accessories or or if you have lost one singular here in parts.

Inner Diameter  = 4.5mm
Outer Diameter = 10mm
Spacer  Length  = 10mm 

1x 10 Inch squares of Top Quality Jessup Grip tape

Mega Grippy & really easy to apply. Ensure the decks surface is clean & dry before application. Easy to custom shape, simply draw your shape on the back & cut out with Scissors or sharp knife. Remember to use a ruler for clean edges.

 

 

M5 Nut - Marine Grade Stainless steel Nylock Nut - Fixes to Trucks & Bindings

Introducing TRAMPA's M5 (5mm Thread) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M5 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M5 Bolts that hold the TRUCKS to the DECK for all  Decks & also for the Dome Head Bolts connecting the L BRACKETS to the BindingsUse an 8mm spanner or Ratchet Drive to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

M6 Nut - Marine Grade Stainless steel Nylock Nut - Fixes Bindings & Trucks to Deck

Introducing TRAMPA's M6 (6mm Thread) A4 Grade Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M6 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M6 Bolts that hold the TRUCKS to the DECK for the HOLYPRO Decks & also for the countersunk bolts connecting the L BRACKETS TO the DECKs. Use an 10mm spanner or SOCKET for a Ratchet Driver to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

TRAMPA WINGS will widen your deck, stiffen the flex, route the cables and increase your overall performance!!

Injection-moulded Riser pad, with a foot-hugging W Shaped concave & integrated cable routing channels.

By widening the deck, & adding extra leverage beneath the toes & heels, WINGS give you tighter turns & Deeper carving!

Channels on the underside allow for under-foot cable routing from the battery boxes to the Motors, keeping connections safe, dry & out the way.

This Page is for the PART ONLY - to get the product with all neccesary fixings, please order from this page.

Recommended decks

Rider's weight Suggested deck Deck Weight Flex

TRAMPA's 35° WINGED MOUNTAINBOARD DECK has been specifically created to perfectly fit TRAMPA's new & stunning range of Electrical products. Having been Asymmetric re-shaped the previously special factory made OVAL HOLYPRO HOLES relating to the Holy pro deck have been removed gaining stiffness  in the center of the deck so that the amazingly flexible whilst still un-breakable deck can accommodate the 2 NEW & very special features, completely unique to TRAMPA, that allows the perfect fitting of the super flexible Silicone cables that carry the battery power from the TRAMPA recommended 'Center of the Deck, Surface Mounted MONSTER Box', out though sealed off exit holes in the underside of the Monster Box into a special 'Sealed Off CNC precision cut Channel' that cuts through the center of the deck, running under the riders trailing foot, into & through a special 'Flow hole' in the tail of the deck to allow the cables to flow through the crease of the deck & be fed around the Trucks in a tidy non interfering route with either the Trucks or when riding in anyway but so that the bullet connecters align perfectly with & connect neatly into the motor. 

The CNC Channel in the center of the deck has a 2mm shelf running around the perimeter of the channel to fit the lid which can at the point os assembly be glued & screwed to keep your cables completely protected, away from interference & the elements & to impress on-lookers who need to know how the power is delivered from the box to the motors!

TRAMPA decks are considered the strongest, poppiest, most Customisable Decks on the market. Their performance is un-matched by any other brand! You will 'Pop' higher & have a more 'Cushioned landing' all thanks to the incredible performance of the TRAMPA deck! Once cooked our impenetrable composite weave is so strong whilst still so flexible, that the magic material will not split, delaminate or break in anyway shape or form, regardless of which deck / ply you choose, or the environment that you use it in, because all TRAMPA Decks are sold as UN-BREAKABLE & to prove this we offer you a lifetime guarantee! 

In this Purchase you get the following items & services...
2x TRAMPA WINGS
28x M3.5 x 12 EJOT Bolt. TORX PAN Headed - SPUR GEAR DRIVE
8x M6 x 35 Countersunk Allen-Key Stainless Steel Bolt
8x M6 Nut - Marine Grade Stainless steel Nylock nut
8x M6 Washer Form C - Marine Grade Stainless Steel
2x 1x 10x10 Inch square Jessup Grip Tape
2x CARBON FIBRE Nose / Tail Cable Cover for Electric Decks with Wings
8x T6 Aluminum Brake disk support spacer - fits between the spoke & the disk
8x M5 x 40mm HEX Head Bolt - Marine Grade Stainless steel
8x M5 Nut - Marine Grade Stainless steel Nylock Nut
8x M5 Washer Form C
Please select what ply 9-69 2WD WING Deck you would like...
Please select what ply 9-69 2WD WING Deck you would like...

16ply 9-69 Mountainboard Deck with WINGS & 2WD Cable Router - Firm
16ply 9-69 Mountainboard Deck with WINGS & 2WD Cable Router - Firm

17ply 9-69 Mountainboard Deck with WINGS & 2WD Cable Router - Stiff
17ply 9-69 Mountainboard Deck with WINGS & 2WD Cable Router - Stiff

18ply 9-69 Mountainboard Deck with WINGS & 2WD Cable Router - Stiffest
18ply 9-69 Mountainboard Deck with WINGS & 2WD Cable Router - Stiffest

Do you wish to add a Monster Box to your TRAMPA Deck??
Do you wish to add a Monster Box to your TRAMPA Deck??

No Monster Box Thank you

I want a Monster Box with Panel to fit 1x VESC 6 (+£185)
I want a Monster Box with Panel to fit 1x VESC 6 (+£185)

I want a Monster Box with Panel to fit 2x VESC 6 (+£185)
I want a Monster Box with Panel to fit 2x VESC 6 (+£185)

I want a Monster Box with Panel to fit 1x HD-60Twin (+£185)
I want a Monster Box with Panel to fit 1x HD-60Twin (+£185)

I want a Monster Box BUT with BLANK Panel - NO VESC (+£185)
I want a Monster Box BUT with BLANK Panel - NO VESC (+£185)

Quantity required:
We have enough parts to make…  
RRP £250 - per deck

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon