This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

21700 2WD Mk II MASSIVE MONSTER Box with 1x VESC 6 Mounting Panel for 1WD

21700 2WD Mk II MASSIVE MONSTER Box with 1x VESC 6 Mounting Panel for 1WD Mk II MASSIVE Monster Box BASE for 2WD Mk II MASSIVE Monster Box LID Mk II MASSIVE Monster Box SIDE PANEL - BLANK LI-PO Mk II MASSIVE Monster Box SIDE PANEL - CHARGER LI-PO Mk II MASSIVE Monster Box 2mm END PANEL - LI-PO Mk II MASSIVE Monster Box 2x VESC 6 2mm Mounting PANEL (2WD) - LI-PO UNIVERSAL Battery Box VESC 6 BLANKING Panel UNIVERSAL DOG BONE KIT for MONSTER BOX attachment
RRP
£175+

DOG-BONE - UNIVERSAL Monster Box MOUNTS

This is the Classic Monster Box DOG-BONE. 

Made from T6 Alumium the DOG-BONE is used to mount the Classic Monster box securely to the TRAMPA deck.

The DOG-BONE requires 1x Top Rubber Mounting pads, 2x Bottom Rubber Mounting Pads, 4x M6x 25mm Countersunk Bolts & 3x M6x 12mm Countersunk Bolts to connect to the CLASSIC Box to the deck securely & without any rattles.

The DOG-BONE is Sold as a kit in Deck Accessories

UNIVERSAL Monster Box 2mm thick Anti-Vibration RUBBER PAD for mounting the DOG BONE Securely

UNIVERSAL Massive & Classic Monster Box DOG BONE 2mm Bottom Rubber Pad.

Mk II MASSIVE Monster Box BASE for 2WD

The Massive Monsterbox Base connects to all vertical panels in a Massive Monster Box or Double Stack Massive Monster Box. They are used with grommets to allow entry into the box by the phase and sensor cables, and the edges of the box are where the hex spacers mount. Additionally, the base is where any Monsterbox is mounted to the board. In this case that can be done via the standard bushing system or Dogbone mounting system. This panel is only designed to operate with 2 motors. 

Mk II MASSIVE Monster Box LID

The Massive Monsterbox MkV Lid rests on top of the side and end panels of the Massive Monsterbox MkV and centers the screws into the hex spacers to hold the box together.

Mk II MASSIVE Monster Box SIDE PANEL - BLANK LI-PO

The side panel is a structural component of the Massive Monster Box that connects the lids and base of the box together. 

Mk II MASSIVE Monster Box SIDE PANEL - CHARGER LI-PO

The Charging side panel is a structural component of the Massive Monster Box that connects the lids and base of the box together. It has cutouts for easy charging and an On/Off Switch.

Mk II MASSIVE Monster Box 2mm END PANEL - LI-PO

Structural component, like the side panels, to connect the lids and base of a Massive Monster Box together.

Mk II MASSIVE Monster Box 2x VESC 6 2mm Mounting PANEL (2WD) - LI-PO

Used for mounting two VESC 6’s on the inside of a Massive Monster Box.

M6 x 25mm Countersunk Allen-Key Bolt - Marine Grade Stainless steel with locking paste

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

The head of this Bolt is COUNTERSUNK, meaning that when screwed into position it sits flush & neat with the surface its screwed into. Preventing bolts from standing proud eliminates the chance of anything getting "snagged or hung-up" should it get caught on something..

Used For;

-Bindings

M6 x 12mm TORX Countersunk Head Bolt Marine Grade Stainless Steel

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

The head of this Bolt is COUNTERSUNK, meaning that when screwed into position it sits flush & neat with the surface its screwed into. Preventing bolts from standing proud eliminates the chance of anything getting "snagged or hung-up" should it get caught on something..

Used For;

BIGGEST Beast Box

In this Kit you get the following parts

1x Mk II MASSIVE Monster Box BASE for 2WD
1x Mk II MASSIVE Monster Box LID
1x Mk II MASSIVE Monster Box SIDE PANEL - BLANK LI-PO
1x Mk II MASSIVE Monster Box SIDE PANEL - CHARGER LI-PO
1x Mk II MASSIVE Monster Box 2mm END PANEL - LI-PO
1x Mk II MASSIVE Monster Box 2x VESC 6 2mm Mounting PANEL (2WD) - LI-PO
1x UNIVERSAL Battery Box VESC 6 BLANKING Panel
2x DOG-BONE - UNIVERSAL Monster Box MOUNTS
4x UNIVERSAL Monster Box DOG BONE 2mm RUBBER PAD
4x M6 x 25 Countersunk Allen-Key Stainless Steel Bolt
4x M6 x 12 Countersunk TORX Bolt
--------------------------------------------------------
External Box Length - 290mm
External Box Width - 228mm
External Box Height - 91mm
Empty Internal Box Length - 274mm
Empty Internal Box Width - 207mm
Empty Internal Box Height - 83mm
Weight: 1,509g
What colour LED Power Switch do you want in your Monster Box?
What colour LED Power Switch do you want in your Monster Box?

BLUE Power Switch
BLUE Power Switch

GREEN Power Switch
GREEN Power Switch

PINK Power Switch
PINK Power Switch

RED Power Switch
RED Power Switch

WHITE Power Switch
WHITE Power Switch

YELLOW Power Switch
YELLOW Power Switch

Roughly speaking, taking all matters into consieration is fair to say that roughly speaking 1Ah (1000mAh) of battery on a TRAMPA Mountainboard is loosely equal to 1 Mile of range. some get more some get less.

Using the classic MONSTER Box & a simple 12s Battery Harness, you can connect 2x 6s 22Ah Li-Po cells to make a single 12s1p pack, therefore 22Ah is approx 22 Miles of Range. 
Alternatively, using TRAMPA's 21Ah 18650 SOLDER-LESS Battery Pack you can self assemble your own battery & squeeze in 84x 18650 3Ah cells to give yourself a first of its kind, a service-able 12s7p battery pack which will give you a total of 21Ah, so approx 21 Mile Range. 
The Classic Monster box should easy see 20 miles of 'good thrash' riding range for an average sized adult, which for most riders is more than enough... 
BUT! For some guys, 20 miles is no way nearly enough & so using the MASSIVE MONSTER Box, (Which is larger & only works in conjunction with the BigBoi Decks) is specially made to fit one of TRAMPA's 35Ah Self Assenbly Cell Packs. The Pack comes with an integrated BMS for Charging & will fit 84x 21700 5A cells (12s7p) so you can build yourself a serviceable 35Ah
21700 SOLDER-LESS Battery Pack which in good conditions and the right rider will easy achieve 35+ Miles range....! Oh Yeah baby!! 
 

Do you want to add a 18650 Cell Pack or Cables to fit a 12s Li-Po Pack?
Do you want to add a 18650 Cell Pack or Cables to fit a 12s Li-Po Pack?

Supply a 12s Cable kit for 2x 6s Li-Po Cells - Cells Not included(+£25)
Supply a 12s Cable kit for 2x 6s Li-Po Cells - Cells Not included(+£25)

Supply a 18650 CELL PACK - Cells Not included (+£325)
Supply a 18650 CELL PACK - Cells Not included (+£325)

No Cable Kit or Cell Pack required thanks

Quantity required:
We have enough parts to make…  
RRP £175 - each

Excluding VAT
HCC: 7019650019

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon