£0 
This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.
TRAMPA TREADS 8 inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs - SOFT Compound
The TRAMPA TREADS Tyre is somethig special! It uses an Intelligent tread pattern incorporating GRIP on GRIP! Available in 2 differnent rubber compounds & suitable for nearly all applications in off road riding, TRAMPA TREADS Tyres will rarely let you down! SOFT compound is lighter in weight & grippier on hard surfaces (perfect for freestyle) whilst the HARD compound tyre is amazing on soft sufaces at digging in for grip & much more durable & long lasting on hard surfaces.
Moulded into the Rim of the Tyre is a 3.75 Inch STEEL BAND. Using a relatively regular TPI the tyre is stitched together giving a solid, inflatable strucure. The recommended tyre pressure set by the factory is 50psi, this will inflate the tyre to have maximum a dimension of 200x50mm (8 x 2 inch). TRAMPA TREADS tyre will fit to all other 8 Inch wheeled Mountainboard & Kite-Landboards currently on the market.!
The TRAMPA HUBS are so strong that top riders have been known to inflate these tyres well beyond their recommended pressures with no problems to mention. However, over-inflating your tyres may cause your tyres to explode & cause you serious injury. If you do decide to go beyond the max inflation pressure make sure your nuts & bolts are tight & deflate to a regular pressure after use.
The 8 Inch TRAMPA TREAD Tyres are somethig special! They use an Intelligent Tread Pattern incorporating GRIP on GRIP! Available in 2 differnent rubber compounds & suitable for nearly all applications that TRAMPA is associated too in extreme off & on road riding, TRAMPA TREADS Tyres will rarely let you down! SOFT compound is lighter in weight & grippier on hard surfaces (perfect for freestyle) whilst the HARD compound tyre is amazing on soft sufaces as it dig's in for grip & is much more durable & long lasting specially on hard surfaces.
Moulded into the Rim of the Tyre is a 3.75 Inch STEEL BAND. Using a relatively regular TPI (TPI means Threads Per Inch & is the number of threads holding the two steel bands in position giving the tyres its structure for the rubber to be moulded into) the tyre is stitched together giving a solid, inflatable strucure. The recommended tyre pressure set by the factory is 50psi, this will inflate the tyre to have maximum a dimension of 200x50mm (8 x 2 inch). TRAMPA TREADS tyre will fit to all other 8 Inch wheeled Mountainboard & Kite-Landboards currently on the market.!
The TRAMPA HUBS are so strong that top riders have been known to inflate these tyres well beyond their recommended pressures with no problems to mention. However, over-inflating your tyres may cause your tyres to explode & cause you serious injury. If you do decide to go beyond the max inflation pressure make sure your nuts & bolts are tight & deflate to a regular pressure after use.
Official Dimensions 8x 2x 3.75 Inch or 200x 50 with 3.75 inch rims
Fits to hubs with 3.75 Inch Rims
Minimum Inflation 20psi
Maximum Inflation 75psi
Recommended Riding Inflation 25-35psi
Inflated tyre diameter 200
Inflated tyre width 50
Most Suitable sized Pulley that fits - 66 Tooth for all round power, 62 tooth for High top Speed, 76 Tooth for High Torque (OBD)
Weight: 270g
HCC: 4011900000
Related Products
-
TRAMPA TREADS 8 Inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs - -
PRIMO STRIKER 8 inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs - -
PRIMO ALPHA 8 inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs - -
DIAMOND TREAD 8 inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs - -
TRAMPA MUD-PLUGGER 8 Inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs - -
INNOVA SLICK CUT 8 Inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs KEVLAR Banded - -
INNOVA INLINE 8 Inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch & Rim fits all 3.75 inch Hubs - -
GOLFA PHATTY 8 inch Tyre measure 3.75x 2.5x 8 Inch or 200x75mm with 3.75 inch Rim will fit to DEEP-DISH MEGASTAR 8 3.75x 2.5 inch Hubs -
+44 (0)115 8410006
All images and material on this site not covered by other copyright and not explicitly marked as public domain is © Trampa Boards 2000 - 2024