This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

M4 x 35mm Marine Grade Stainless Steel HYPA Hub Bolt kit

M4 x 35mm Marine Grade Stainless Steel HYPA Hub Bolt kit M4 x 35mm Socket Capped TORX Bolt - Marine Grade Stainless steel with locking paste M4 Nyloc Nut - Marine Grade stainless steel Nylock Nut - Hub Nuts
RRP
£2.50+

Trampa use only the finest A4 Marine Grade stainless steel in all of their hardware which means your Trampa can be used in and handle the harshest of environments...

Use an 3mm Allen or HEX key too tighten the nuts into the bolts.

All bolts are dipped in Blue Glue paste to give the ultimate secure fix.

All nuts are fitted with the internationally renowned "Nylock" locking system.

As expected with TRAMPA only the best fixings will do....

These M4 x 40mm Socket cap bolts are made from Marine Grade Stainless steel and for an extra quality touch brushed with blue glue paste so that when they are fixed together with the correct M4 Nylock nut,  they have the best fix there is on the market.

Attention to small details is the beauty of Trampa....

Using A2 marine grade Stainless steel to provide the finest quality nuts and bolts, this 6 piece set consists of  M4 x 35mm Socket cap, allun key headed bolt with Blue locking paste and 4mm nylock nuts.

Used for constructing the Trampa Hypa hubs together.

Trampa's stainless bolt range ensures a durable, strong and the perfectly neat finish to your deck.a corrosion free, strong and the perfect neat fitting.

M4 x 35mm Socket Capped TORX Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 35mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special Bolt is specifically made for TRAMPA & is used to assemble the TRAMPA PHATLADZ HUBS. The socket capped head of the Bolt screws neatly though the Spokes & into the fixing point in the Rim, eventually screwing  into the M4 nut on the other side easly.

Weighing just 3 grams each, they are very lightweight, look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

M4 Nyloc Nut - Marine Grade stainless steel Nylock Nut - Hub Nuts

Introducing TRAMPA's M4 (4mm Shaft) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M4 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to tighten to the M4 Socket Capped Bolts that hold the HYPA & SUPERSTAR hubs together. To fit the nuts M4 use an 8mm spanner or  8mm Ratchet Socket to turn the Nut onto the Bolt whilst holding the bolt with a 3mm Allen Key. Always ensure your Nuts & Bolts are tight before you ride!

M4 x 35mm Marine Grade Stainless Steel HYPA hub Bolt Kit. This bolt kit is used specifically for constructing the TRAMPA HYPA hub. All TRAMPA Bolts are Dipped in Blue locking paste whilst all of the nuts have been fitted with the world renowned 'Nylock' locking system to ensure the most secure fix possible.

Push the nut into the housing in the Hub & using a 3mm allen key to turn the Bolt through the hub & into the nut. Try not to over tighten the Bolt as the Nut will ultimately spin in its housing. Ensure all your Nuts & Bolts are nice & tight before you ride!

6x M4 x 35 Socket Cap TORX Bolt
6x M4 Nut - Marine Grade Stainless steel Nylock Nut

Weight: 36g
HCC: 8714929000
Quantity required:
RRP £2.50 - per set

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon