This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

VESC Based BMS - Balance charges up to 18s

VESC Based BMS - Balance charges up to 18s TRAMPA VESC BMS (Battery Management System) MAIN PCB x500 TRAMPA VESC Battery Management System PCB COVER - Top TRAMPA BMS HEAT SINK - PCB Housing Base - VERSION 1 M3 x 12mm TORX Countersunk Head Bolt Marine Grade Stainless Steel M3 x 6mm Plastic Stand-off Spacer 1.5mm PURPLE Silicon Cable with BLACK TRAMPA logo Core Top Quality BIAFF electrical Cable price per 10cm XT30U Female Yellow XT30U Male Yellow 18s BMS balance cable Temp Sensor cable for BMS 70mm JST PH 6 Pin Bridge Connector Cable
RRP
£200+

The VESC 18S BMS is a charge only BATTERY MANAGEMENT SYSTEM. Charging up to 18 cells in series featuring cell balancing, charge coupling & decoupling, temperature monitoring and system health checks. The device is designed to be integrated into the VESC ecosystem, allowing it to continuously share information about the battery sate with other CAN linked devices, so that the battery always will be operated within pre-defined & acceptable limits.

The VESC motor controllers use the data on the Can-Bus from the BMS for soft power ramp-down when the cells get warm or approach end of charge, which preserves the cells & avoids hard cutoffs. This dynamic interaction sets the device apart from less sophisticated solutions without a transparent communication structure.

The BMS is backed by the VESC Tool, which runs on Linux, Windows, iOS, MacOS & Android. Features include a wide range of adjustments for the battery setup & operation as well as live monitoring & logging capabilities onto a computer or VESC device like the VESC-Express.

Features
● Supports 3 to 18 cells
● LTC6813 chipset
● Charge-only BMS
● Chemistry: LiIon, LiPo, LiFePo4
● SoC & SoH estimation
● Charge current measurement
● Charge cut-off on cell over temperature
● Charge cutoff on cell over charge
● Over temperature detection BMS
● Cell temperature monitoring (3x NTC)
● Self test routine
● CAN connectivity
● Communication with VESC motor controller
● Buzzer for acoustic warning signals
● VESC Tool desktop & mobile support for configuration and monitoring (mobile requires a wireless module)

Applications
● General purpose smart BMS for 3 to 18 cells in series
● For integration into VESC ecosystem

WARNING: Read the ENTIRE instruction manual (showing in the MANUALS TAB above this text or from the MANUALS Page found under the HQ Menu) to become familiar with the device & its features before operating. Failure to operate the product correctly & safely may result in damage to the product, personal property & cause serious injury or death.

1.5mm PURPLE Silicon Cable with BLACK TRAMPA logo Core Top Quality BIAFF electrical Cable price per 10cm

Allow your Electric board to gain the maximum performance by fitting the very highest quality Electrical Cables & Connectors and let the power in your battery flood out as performance at the rear wheels!! Its taken a serious wedge of cash to get what we wanted & a hell of a long time waiting for our turn in production to produce to such a small amount of such a high quality cable, but finally TRAMPA has had what it wanted delivered & we can now supply you with Super high Quality Silicon Cables in RED or BLACK with co-orinating BLACK & WHITE TRAMPA logos to prove the quality & show off the kind of performance your board is capable of! :-)

TRAMPA's gorgeous Silicon cables are made by the same GERMAN company who makes the world Famous BLAFF Cables. The Blaff cables have enclosed in the Besilen insulated​ Silicon Outer sleeve, 1800 Highly flexible TOP QUALITY Copper strands in the center... BLAFF cable is used for the highest demanding jobs where performance is critical. BLAFF's Cables are so good they are used for public Transportation (Trains, Trams, Planes) as they have a global reputation of incredible high standards.

PURPLE Silicon coated cable
Copper Core Dimension - 1.5mm
Outer Casing Dimension - 3.2mm
Temperature Range -
- Flexible use -25ºC / +180ºC
- Fixed laying -40ºC / +180ºC
Normal Voltage Uo/U 300/300V

XT30U Female Yellow

XT30U Female, Yellow. Intended to be used on PCBs.

M3 x 12mm TORX Countersunk Head Bolt Marine Grade Stainless Steel

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

The head of this Bolt is COUNTERSUNK, meaning that when screwed into position it sits flush & neat with the surface its screwed into. Preventing bolts from standing proud eliminates the chance of anything getting "snagged or hung-up" should it get caught on something..

Used For;

BIGGEST Beast Box

TRAMPA's 18s BMS is a VESC based charge only BATTERY MANAGEMENT SYSTEM. Charging up to 18 cells in series featuring cell balancing, charge coupling & decoupling, temperature monitoring & lots of system health checks. The device is designed to be integrated into the VESC ecosystem of products, allowing it to continuously share information about the battery state with other CAN linked devices, so that the battery always will be operated within pre-defined & acceptable limits.

The VESC motor controllers use the data on the Can-Bus from the BMS for soft power ramp-down when the cells get warm or approach end of charge, which preserves the cells & avoids hard cutoffs. This dynamic interaction sets the device apart from less sophisticated solutions without a transparent communication structure.

The BMS is backed by the VESC Tool, which runs on Linux, Windows, iOS, Mac-OS & Android. Features include a wide range of adjustments for the battery setup & operation as well as live monitoring & logging capabilities onto a computer or VESC device like the VESC-Express.

Features
● Supports 3 to 18 cells
● LTC6813 chipset
● Charge-only BMS
● Chemistry: Li-Ion, Li-Po, LiFe-Po4
● SoC & SoH estimation
● Charge current measurement
● Charge cut-off on cell over temperature
● Charge cutoff on cell over charge
● Over temperature detection BMS
● Cell temperature monitoring (3x NTC)
● Self test routine
● CAN connectivity
● Communication with VESC motor controller
● Buzzer for acoustic warning signals
● VESC Tool desktop & mobile support for configuration and monitoring (mobile requires a wireless module)

Applications
● General purpose smart BMS for 3 to 18 cells in series
● For integration into VESC ecosystem

WARNING: Read the ENTIRE instruction manual (showing in the MANUALS TAB above this text or from the MANUALS Page found under the HQ Menu) to become familiar with the device & its features before operating. Failure to operate the product correctly & safely may result in damage to the product, personal property & cause serious injury or death.

1x TRAMPA VESC BMS (Battery Management System) MAIN PCB x500
1x TRAMPA VESC Battery Management System PCB COVER - Top
1x TRAMPA BMS HEAT SINK - PCB Housing Base - VERSION 1
1x TRAMPA VESC (BMS) HEAT PAD 67.5 x 36 x 0.5t/mm
6x M3 x 12 Countersunk TORX Bolt
6x M3 x 6mm Plastic Stand-off Spacer
4x 1.5mm PURPLE Silicon Cable with BLACK TRAMPA Logo - per 10cm
1x XT30U Female Yellow
1x XT30U Male Yellow
2x 18s BMS balance cable
2x Temp Sensor cable for BMS 70mm JST PH
1x 6 Pin Bridge Connector Cable
Weight: 162g
Quantity required:
We have enough parts to make…  
RRP £200 - each

Excluding VAT
HCC: 85065010

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon