This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

TRAMPA's ORRSOM Electric Longboard with URBAN TREADS Pneumatic Tyres - SINGLE MOTOR

TRAMPA's ORRSOM Electric Longboard with URBAN TREADS Pneumatic Tyres  - SINGLE MOTOR TRAMPA's ORRSOM Electric Longboard with URBAN TREADS Pneumatic Tyres  - SINGLE MOTOR TRAMPA's ORRSOM Electric Longboard with URBAN TREADS Pneumatic Tyres  - SINGLE MOTOR TRAMPA's ORRSOM Electric Longboard with URBAN TREADS Pneumatic Tyres  - SINGLE MOTOR TRAMPA's ORRSOM Electric Longboard with URBAN TREADS Pneumatic Tyres  - SINGLE MOTOR TRAMPA's ORRSOM Electric Longboard with URBAN TREADS Pneumatic Tyres  - SINGLE MOTOR TRAMPA's ORRSOM Electric Longboard with URBAN TREADS Pneumatic Tyres  - SINGLE MOTOR ORRSOM Longboard - Concave & Multi mountable having 3 Ride height positions, ORRSOM!! 12Fifties - CNC Precision made Extra Wide All Terrain Longboard Truck Build your own Custom 6 Inch TRAMPA Wheel!!  HYPA SUPERSTAR or MEGASTAR Wheel 12mm ATB Bearings with 9.525mm Bearing Reducer Sleeves for complete board SINGLE VESC SIX MkV for ORRSOM Longboard Underboard Battery Tray Premium Silicon cables, XT90 connector & 3.5mm Gold plated Bullet Connectors, ORRSOM LONGBOARD Underboard Battery Tray 63cm long CNC precision mounting holes - With Battery Bungs & all fixings SINGLE Motor 12s1p x2 Underboard Battery Box Complete XT90s Cable kit - Everything you need to Wire your board if using Zippy Compact batteries with XT90 plugs Custom Choice of Remote Controller
From
£950
exc tax
schematic

flexometer


 

ORRSOM Longboard - Concave & Multi mountable having 3 Ride height positions, ORRSOM!!

TRAMPA's ORRSUM Longboard deck is a break though in deck technology & is radically different deck to all other longboard decks that have come before it!

Made from the amazingly flexible TRAMPA Composite material the deck it is split at the tip, and capable of connectig to the senastional 12Fifties Extra Wide Longboard trucks to assemble to give 3 different ride heights to suit the 3 different 3 wheel sizes it is made to work perfectly with.


TRAMPA’s famous range of indestructible Decks are unlike anything else on the market. Tailored to a riders' weight, height & ability – TRAMPA DECKS give unrivaled responsiveness & confidence in the board when riding.

Created to replace dull unresponsive wooden decks & reinvent the off-road riding experience, TRAMPA decks bring a whole new riding-experience. With insane ‘pop’ & shock-absorbing flex, TRAMPA decks are the #1 choice for freestyle riding & comfortable cruising.  

Made using a secret re-enforced glass and plastic composite (originally developed for light-weight military applications), TRAMPA decks are indestructible. In 17 years of excessive & harsh testing - pushing the decks to their limits (inside & out of intended applications) - there has never been a single break!

TRAMPA decks are measured in “Ply”, referring to how many layers of ‘secret-composite’ are used when making the deck. A lower ply deck will be flexi-er & lighter than a higher-ply one. Generally we recommend higher ply decks for heavier riders, and lower for lighter riders – but flex, pop, and stiffness are all a matter of taste. Our Ply-ratings range from 11 - 18 in various lengths & shapes – meaning there’s a perfect TRAMPA deck for everyone!

TRAMPA decks have 35°, 15° or 0° Truck Mounting Angles, in order to work with the various steering systems used across different applications.
35° Decks – Work in perfect harmony with TRAMPA’s amazing Spring Trucks – a highly tuneable steering system designed give optimal responsiveness at 35°.
15° Decks – Fit to ATB Skate Trucks – a lightweight & cheaper steering system, perfect for lighter riders & kiteboarders.
0° Deck – Our ORRSOM Longboard Deck uses a special split-tip that allows 12FIFTIES Longboard trucks to be mounted at 3 different heights. 


How are they made?

The TRAMPA™ deck is made from a re-enforced glass and plastic thermo composite. Chosen because it gives a superior strength-to-weight ratio, whilst (unlike carbon fibre) remaining flexible. It is able to withstand huge impacts, forces and flex's that would shatter other materials.

Specially formulated, and presented in a thread like format, just like cotton. From there, it’s woven to our desired width, and placed it onto a roll. Pre-shaped, polished-aluminium moulds are used to give the material the dimensions and surface quality we require – this is where we vary the layer quantity of the composite in the mould, & control the amount of flex and pop in the resulting deck, giving us our Ply Ratings.

A special seal is used to create a high-pressured vacuum, then mould is then placed in a special oven to cook for about 2 hours. As the air is sucked out, the heated material becomes fluid – then at the crucial moment heating is turned off and the moulds are cooled, resulting in one solid piece! The decks are then cut out using a high-pressure water-cutter, resulting in a razor sharp finish to the edge of the deck.

The decks are then finished by hand. The binding and grab handle fixing holes are measured and drilled by hand, Metal files are used to take away the sharp edge of the deck and they are then rubbed smooth with a block and various grades of sandpaper.


TRAMPA are happy to announce that we can now offer CUSTOM PAINT JOBS on our decks. We’ve been releasing our parts in an amazing selection of colours - and now it’s time we offer the deck to match!

We’re luckily sited next to an awesome car spray shop, which are happy to take on some of our decks and make them shine! They know their paint, and know techniques for making any colour pop, without adding too much weight to the finished deck - guaranteeing a perfect & even finish that’ll last for years.

We’ve got a wide range of colours for you to pick and choose from, or you can send over a pantone of your own and we’ll match it the best we can!

Custom Sprayed Decks costs £100 extra, and should be ready to ship two weeks from your order.

12Fifties - CNC Precision made Extra Wide All Terrain Longboard Truck

TRAMPA's Super Sexy 12FIFTIES Extra Wide Longboard Trucks are absolutely fabulous! CNC precision shaped from a solid Block of T6 Aluminum, the 50º Mounted Hanger measures 12.5 Inch wide & is fitted with 9.525mm (3/8ths of an inch) Hardened Steel axels which means the EXTRA WIDE Longboard Truck will accommodate every wheel in the TRAMPA product range from 83 or 90mm STICKIES Longboard WHEELS125mm GUMMIES Longboard Tyres & The Amazing 6.5 Inch URBAN TREADS Tyres

Being 12 Inch wide & Mounted at 50º the 12Fifities Extra Wide Longboard trucks are named after around dimensions. The Extra Wide Longboard Trucks provide high speed stability & the opertunity to add Pneumatic tyres, which beings a complete new ride experience when riding the rough roads that around us, cruising over cracks in the pavement is glorious!

Build your own Custom 6 Inch TRAMPA Wheel!! HYPA SUPERSTAR or MEGASTAR Wheel

TRAMPA's 6.5 Inch Low profile URBAN TREADS tyres have been specifically designed to fit TRAMPA's incredibly strong 6 Spoke HYPA & 5 Spoke SUPERSTAR hubs. My design brief to Frank was simple - make the smallest, best quality pneumatic tyre we possibly can, I want to radically changing the rough ride experience of that when riding with regular style longboard wheels, specially at speed when riding in Urban/City environments.... We all know the pavements & roads are far from a perfect surface so much so that sometimes its almost impossible to ride regular Longboard wheels, some of the pot holes around me are terrible but with these URBAN TREADS tyres fitted you can smash through all the imperfections whilst still enjoying that small wheel feel...

TRAMPA's URBAN TREADS tyres are arguably the PREMIUM TYRE in TRAMPA's range of tyres. Made with whats known a High TPI construction (TPI means Threads Per Inch & the URBAN TREADS tyre uses thousands of very Fine Threads per Inch to stitch between the outer lightweight nylon bands, this in turn gives the construction shape to the tyre) this High TPI means the tyre's construction is incredibly strong whilst still very supple, like a posh bicycle tyre but by smothering the Treads with premium quality HIGH GRIP COMPOUND motorcycle rubber to cover the High TPI construction, not only are the URBAN TREADS Tyre amazingly light weight but it has performance like that to match a premium motorcycle tyre!!

Having a High TPI & using hefty amounts of thick Motorcycle rubber means not only is the construction of the tyre incredibly strong but it will also wear incredibly well too. This extra strength in turn allows the tyre to be run at both, incredibly low tyre pressure or should the circumstances require (such as a skate park where you need to pump hard) inflated to being incredibly hard the URBAN TREADS Tyres can easily handle our factory set limit of 85psi, (but ONLY inflate to 85psi when fitting the URBAN TREADS on to the TRAMPA HYPA or SUPERSTAR hubs) but we have herd of some of the crazy TRAMPA Lab Rats (i mean team riders) are inflating over 100psi (i dont think their pump will allow them to get any more air in haha) & with currently no problems to report... But for sure, if one pop's at 100 psi it will certainly make one hell of a noise!! BANG!!​ haha! :-)

Riding on such a small sized tyre gives the most radical performance change to literally every board in the TRAMPA range. The is no doubt the tyre was developed specifically for the URBAN CARVER BOARD & more in particular the ELECTRIC URBAN CARVE BOARD where both products use a smaller deck & the smaller sized Mini Spring Trucks system,  the smaller board needed a slightly smaller tyre than that of the full sized 8 inch ATB decks to compliment the overall product size, so in true TRAMPA style we made the URBAN TREADS Tyre special for that application but since then we have found over these last cold wet winter months that the 6.5 inch URBAN TREADS tyres have also become the choice tyre for Mountainboards who are maintaining their riding skills in the out of season period by riding in indoor Parks or Tracks, just ask the world famous Brind Brothers - PRO TRAMPA Team riders, who have literally not stopped riding through the winter since the release of these new tyres...

TRAMPA's Electric boards have amazing performance with a top speed of well over 50kmph achievable on all models. When your hitting high speeds like this you need good tyres on your board. Thankfully the URBAN CARVE range of decks are fitted with super sexy 6.5 inch URBAN TREADS Tyres as standard. The reinforced, low profiled, wide center beaded with intelligently designed jagged edge around the side can be run on low inflation pressure which gives enough grip to cut muddy corners or nip down hard packed off road tracks no problem, but can also handle the super inflation for straight line flat out speed. If you wish to ride full speed we 1stly suggest you turn the SPRING ADJUSTERS clockwise to tighten the steering resistance, pre-loading more tension into your springs before you wish to hit high speeds will prevent potential wobble, and if you re beginning to feel a bit of wobble, then you should moce te springs to the outside position before attempting to go any faster. If you still feel speed wobble when the springs are in the outside position, then you should then further Add the TRAMPA DAMPA's to add more resistance to the steering to enable you to be able to go even faster :-)

The Urban Tread tyre doesn't only handle high speeds easily but riding around town where you are likely to be bashing up & down curbs & dealing with cracks in the road or potholes, then you are most likely, or you should be riding at much lower inflation pressures. The lower pressure gives so much comfort on the rougher stuff but of course does increase Drag making it harder for your batteries to perform well...

ORRSOM LONGBOARD Underboard Battery Tray 63cm long CNC precision mounting holes - With Battery Bungs & all fixings

TRAMPA’s Under-board battery tray is a sleek & stealthy cell-storage solution.
Mounting batteries on the underside of a deck puts them more at risk from bumps & scrapes than over-board solutions. Made from the same super-strong (secret), material used for TRAMPA DECKS, this battery tray keeps everything secure & protected.

Designed to work in conjunction with the amazing ORRSOM ELECTRIC LONGBOARD range (or any custom builds if the space is there).  At 630 x 200 x 24mm, this tray can fit 6x 2s 10000mAH HRB Cells - and still have room for single or twin VESCs! That’s a lot of GO-power in one tray!

With precision CNC’d T6 End Bungs, rubber grommets & a tidy foam seal, you can be confident that everything precious inside will be kept nice & dry.

Attached using 22x M4x10mm bolts, this tray is staying secure no matter how much the deck flexes!

SINGLE VESC SIX MkV for ORRSOM Longboard Underboard Battery Tray Premium Silicon cables, XT90 connector & 3.5mm Gold plated Bullet Connectors,

Introducing the amazing VESC® 6 MKV Speed Controller, the fourth major product update of the world famous VESC 6 motor controller product line. Packed with a variety of amazing new features, this VESC motor controller is certainly worth of it’s pimpin’ gold logo.

The first VESC controller capable of hibernating, your board can conserve power while not in use - reducing power consumption to just 20μA – less than the self-discharge rate of the batteries. Or with automatic power off, your VESC controller can switch itself off after a set amount of time.

No more loop keys! Compatible with power buttons / switches, the VESC 6 MKV controller can be ready to go with a single press / flick. If desired, multiple devices can share a single button.

Roll-to-start – it’s possible to set your board to power up with a small kick/nudge!

In its development, no Mosfet switches were used - due to their tendency to eventually blow up. This saves on the additional costs of replacing them, & also adds to the longevity of the VESC 6 MKV.

When we developed the VESC 75/300 controller, it was obvious that most of its features would be handy to have in the VESC 6 controller format.  As a result, Benjamin Vedder took on the challenge and re-designed the entire PCB of the VESC 6 controller, to make new, powerful features available in a smaller & cheaper 60V rated package.

The VESC 6 MKV controller features THREE PHASE SHUNTS & adjustable CURRENT / VOLTAGE FILTERS - detecting any motor attached more precisely and reliably than ever before. Consequently all kinds of motors now run as smooth as butter & react PERFECTLY LINEAR to throttle input commands.

You’ll also find a new IMU chip fitted - featuring a gyroscope, accelerometers and a compass, the VESC 6 MKV knows its 3D orientation in space, 3 axis acceleration values and directions. 

UAVCAN has been added to the firmware allowing to interact with commonly used flight controllers like the PIXHAWK ®* devices. An incredible 12,000 lines of code have been added for the new hardware releases. To make the VESC controller nearly indestructible, the low voltage rails were redesigned A-Z.

VESC-Tool software is now available as an Android™ compatible App, allowing you to configure your VESC or VESC controller array with only a few clicks. User specific PROFILES will let you change in between different setups with a single tap on the fly.

Using an original VESC 6 MKV controllermotor detection is now more precise than ever. Extreme low inductance (0.5 μHmotors are no issue! 

Parameters for gearing and wheel diameter have been added, allowing display of speed, Wh usage per distance travelled, precise battery indicator, current consumption, duty cycle and power. Beautiful self-adjusting analogue displays make the readings of all parameters very enjoyable.

What makes the original VESC hardware so special?

The original hardware is perfectly matched to work seamless withe VESC-Tool software code. Both, hardware and software, have been designed by the same engineer, knowing all critical detail.

TRAMPA BOARDS LTD has teamed up with the internationally renowned 'YODA of electronics' (Benjamin Vedder) to bring to the world the most advance electronic speed controllers ever to be produced! Benjamin's family name is Vedder & the V in the brand VESC represents this. VEDDERs Electronic Speed Controller! There have been many ESC's before, but now the VESC line of products officially exists, made to work seamless with the latest software developments. Benjamin is globally renowned for his incredible electronics and software skills. He has worked tirelessly for well over 7 years fine tuning preceding versions of the globally famous & Trade Marked VESC products & after teaming up with TRAMPA BOARDS Ltd the development of the VESC product line has taken him to his highest capability yet.

The TRAMPA VESC controllers  comes fitted as standard with TRAMPA's very own & very special Silicone Coated & TRAMPA logo'd cables which are made up of 1036 Strands of Highly Flexible Top quality German copper. These quality details ensure the maximum performance at all times. Attached To the premium copper cables are genuine Amass XT90s connectors one side & 4mm Gold Plated Bullet connectors the other. The VESC 6 MKIII is installed with a custom moulded Internal Silicone Seal & is neatly fitted into the Heat sink which is a Solid Block of CNC'd  6061T6  Aluminum, used for dispensing the heat and offering maximum protection, allowing easy fitting and maximum good looks!..

The VESC line of produces are the most powerful & impressive Electric Speed Controller Benjamin has ever envisioned! They are  arguably by far the best and most versatile Electronic Speed Controllers the world has ever seen!! E Boarding, E-Biking, Remote control of all kinds including Drones & Robotics and Camera equipment (as well as thousands of industrial & recreational applications) are all about to be revolutionized by using the VESC series of products that will all come to the market soon...

Using the a VESC controller in your TRAMPA BOARD setup (Regardless of which model) will allow you to add any battery up to 12s with 60V of peak voltage. This is the perfect limit to give you incredible performance from your electric TRAMPA motors or similar. Using the new VESC TOOL software, you will be able to fine tune your performances relevant to your application, where you will be able to calculate your top end speeds & approx distance to travel using different combinations of power & gearing settings. Beautiful!

VESC controllers comes to you ready to plug in & go! They are delivered to you in a very stylish precision cut 6061 T6 aluminum heat-sink housing which has the TRAMPA & VESC logo beautifully laser etched to its surface & for further splash proofing we have invested into another mould for additional exterior Silicone Sealing which is available as an accessory to purchase.

The performance of the TRAMPA VESC controllers, compared to preceding third party models, is light years ahead! This is demonstrated in the cost as cheap non effective clones are sold according to their price not their quality. If you want the best performance then stick to the original hardware source - it will save you a lot of money on the long run and is a guarantee for ultimate performance and max compatibility with future software releases.

Our VESC controllers are being configured with the brand new Open Source, GPL V3 licensed VESC®-Tool Software:  www.vesc-project.com and on the Google Play Store™*.
The Open source, GPL V3 licensed VESC Firmware will come pre-installed on the device, allowing us to do extra testing of the device, prior to shipping.
This is the GPL V3 license contract for your reference:  www.vesc-project.com/GPL V3

Features

- Current and voltage measurement on all phases (three phase shunts)
- Adjustable current and voltage filters
- built in IMU chip (accelerometer, gyro)
- Regenerative braking
- Traction control (single and twin setup)
- Sensored or sensor less operation + hybrid mode
- Configurable RPM-, current-, voltage- and power limits
- Input source: PPM, Analog, NRF Nyko Kama Nunchuck
- Communication ports: USB, CAN,UAVCAN, UART
- Throttle curve and ramping for all input sources
- Separate throttle curves for acceleration and brakes
- Seamless 4-quadrant operation
- Motor revolution, amp hour, watt hour counting
- Display of speed, power, duty cycle, amp flow, estimated range and battery status on App
- Accumulated data from arrays of VESCs
- Real time data analysis and read out via communication ports
- Real time data analysis and read out via VESC-Tool APP or VESC-Tool software
- Adjustable protection against:

          -    Low input voltage
          -    High input voltage
          -    High motor current
          -    High input current
          -    High regenerative braking current (separate limits for the motor and the input)
          -    High RPM (separate limits for each direction).
          -    Over temperature (MOSFET and motor)

Technical Data Sheet

- Voltage: 11.1V – 60V (Safe for 3S to 12S LiPo).
- Voltage spikes may not exceed 60V!
- Current: Continuous 80A, Burst 120A.  Values depend on the temperature and air circulation around the device!
- 5V 1A output for external electronics
- 3.3V 0,5A output for external electronics
- Modes: DC, BLDC, FOC (sinusoidal)
- Supported sensors: ABI, HALL, AS5047

* Android is a trademark of Google LLC.
Google and Play Store are trademarks of Google LLC.
PIXHAWK is a trademark of Lorenz Meier

3x 15cm lengths of 1036 Strand Super Flexible BLACK Silicone coated Cables with Bullet connectors to plug directly into the motor. 50cm's length of 1036 Strand Super Flexible RED & BLACK Silicone cable with XT90 Connector coming out of the VESC heading either over the top of the binding or around the heel strap binding directly into the MONSTER BOX. Made specifically & connects perfectly into the 12s Battery Harness neatly inside the Beast Box. This VESC 6 Comes With NRF (is for EU Customers only) & can be connected wirelessly through a Android device...

SINGLE Motor 12s1p x2 Underboard Battery Box Complete XT90s Cable kit - Everything you need to Wire your board if using Zippy Compact batteries with XT90 plugs

TEXT NEEDS ADJUSTING

 

This complete Cable kit is used to link 2x 6s Batteries together (the batteries must be fitted with female XT90 connectors), passing trough a 50Amp safety fuse into a single TRAMPA VESC to power a single TRAMPA motor giving you the amazing 12s power that everybody is talking about... :-)

The finely stranded (1036 strands per 4mm core) & highest standard available copper cables (made in Germany) flex perfectly in their top quality & super flexible silicone coating to enable you to connect everything together neatly within the contents of the carbon fibre Beast Box, remember the VESC is mounted internally in the Beast Box and I can tell you it can be a bit of a squeeze fitting everything into the Beast, but having superflexible high quality cables to work with means everything can be easily moved around inside the box slipping them into the perfect position without the fear of damaging the cables or the hand soldered in the UK connections to the XT90 plugs... 

The XT90 plugs have a little ridge on their exterior whilst the material they are made from is very strong and very cleverly we have made the Beast box lid with 2 precision made holes perfect for accepting for the XT90's to push through the lid from the inside of the box & rest against the rim of the hole in the lid, allowing everything else in the box to seal away enabling you to be able to, with the use of some squeeze silicone in a tube to become pretty much weather proof... 

By the use of some suitably small 2mm holes next to the precision holes for the XT90 connectors it's possible in combination to neatly zip tie between the XT90's to lock them firmly in position  giving them a strong enough connection  so that so that you can easily push & pull the loopkey / cuicuit breaker at any time from the exterior with out the fear of damaging anything inside or out...!

 The beast box is also fitted with more precision holes to allow tying the exterior VESC cables which come out of the rear of the Beast box to reach the motor whilst holding all the cables neatly in their best position.

Constructed using 4mm thick of the highest standard Copper available (that's lots of Super fine copper Strands - 1036 strands per 4mm core) and coated in Super Flexible Premium Silicone which has been TRAMPA Stamped to prove it's geniality & expected quality (Cus these top quality cables are not cheap) are used to maximise & maintain full performance in your Electric TRAMPA Board at all times! 

Custom Choice of Remote Controller

The Maytech Remote controller is comfortable to hold & works well as a thumb operated remote control when riding a TRAMPA Electric board. Opposed to the more-common trigger controllers, where you use your forefinger to operate a trigger on the underside of the controller, the Maytech controller uses your thumb on the top - meaning you push forwards to fly forwards! It may take some getting used to, but we’ve found the small, tactful & simple design of these remotes are perfect for controlling your speed & keeping you cruising along comfortably.

The Maytech remote control comes with its own rechargeable lithium batteries (already installed and sealed in the device) & a Micro USB cable for charging. Full charging takes approximately 2 hours but one charge is enough for at least 8 hours (Maytech claims 10 hours but we’ve never tested their claim). You should never run out of power in one run, however just to be safe you should always charge the controller when you charge your board -  you never want a dead controller halfway through a ride, that's a school boy error!

The Controller is already paired to the receiver, which means all you have to do is push it into the VESC & within a moment (so long as everything has power in it) you should have a automatic connection - Easy!

The HobbyKing® ™ GT2B is a tad more substantial in size, but comes with a few more features, as well as some customisable options. Featuring a 3 channel operation, interchangeable hand grips, adjustable steering dual-rate, servo reversing and a rechargeable li-ion battery. The li-ion battery makes this transmitter much lighter, which gives the user a great feel during use - no more lugging around a heavy transmitter holding (expensive!) AA batteries!

The Quanum pistol grip transmitter & receiver system is an entry level system offering the reliability of 2.4Ghz signal technology and will control the speed of your Electric TRAMPA Board. The transmitter is powered by 4 x AAA type batteries & is extremely compact & lightweight. The transmitter has some unique features, such as the magazine style battery tray, which pops out at the push of a button allowing you to change your batteries quick & easy. The Trigger Throttle control is comfortable in your hand and easy to control whilst riding your board. The Quanum Tx & Rx package is simple to use and is suitable for all TRAMPA setups.

TRAMPA's ORRSUM Longboard deck is a break though in deck technology & is radically different deck to all other longboard decks that have come before it!

Made from the amazingly flexible TRAMPA Composite material the deck it is split at the tip, and capable of connectig to the senastional 12Fifties Extra Wide Longboard trucks to assemble to

READ MORE...

Complete Deck Weight

TRAMPA's ORRSOM Longboard Deck 14 ply 15 ply 16 ply
Blank Deck Weight 2,400g 2,600g 2,800g
Component Weight 4,466g 4,466g 4,466g
Complete Deck Weight 6.9 kg 7.1 kg 7.3 kg

Component Weights

12Fifties - CNC Precision made Extra Wide All Terrain Longboard Truck1,220g
Custom 6 inch TRAMPA Wheel HYPA SUPERSTAR or MEGASTAR1,788g
Custom 12mm ATB Bearings with 9.525mm Bearing Reducer Sleeves190g
VESC SIX MkV special Cable Length for underboard Battery Tray 224g
ORRSOM LONGBOARD Underboard Battery Tray for Single Motor931g
SINGLE Motor Underboard Battery Box XT90s Complete Cable kit 63g
Custom choice of Remote Control - Pre order the WAND in options below!50g
Total component weight4,466g
12Fifties - CNC Precision made Extra Wide All Terrain Longboard Truck
Build your own Custom 6 Inch TRAMPA Wheel!!  HYPA SUPERSTAR or MEGASTAR Wheel
TRAMPA's ORRSOM Longboard 985mm tip to tip Concave with Multi Ride Height 3 Decks in 1!

Blank deck weight chart

TRAMPA's ORRSOM Longboard Deck 14 ply 15 ply 16 ply
Blank Deck Weight 2,400g 2,600g 2,800g
General Flex Rating firm stiff very stiff
TRAMPA ORRSOM Longboard Deck has 5º of Concave
Its Tip to Tip Deck Length is 995mm or 39 Inch
The Axle to Axle Wheel Base is 874mm or 34.5 Inch
Deck Widest Point on the ORRSOM Deck is 235mm or 9.25 Inch
The ORRSOM Deck is available in 14ply Flexi, 15ply Firm or 16ply Stiff Deck
This Deck is designed to accept the 12Fifties Extra Wide Longboard Trucks.
When using 12Fifties Extra wide Longboard Trucks the ORRSOM Longboard deck can be set up at 3 different ride heights to accommodate the riders style & wheel size fitted.
When using TRAMPA's ORRSOM Longboard deck with the 12Fifties Extra Wide longboard Trucks, using the correct sized bearing its possible to fit any of the following, 83 or 90mm Longboard Wheels, 125mm GUMMIES Longboard Wheels & 6.5 inch URBAN TREADS or 7 Inch Inline Pneumatic tyres. or 8 Inch Tyres should you wish to go so large...
If you change your wheel size you will need to change your Pulley & Belt to accomodate the new size and gain the correct gearing for best performance. Using Different sized Pulleys & Belts to accommodate the different sized wheels the same Carbon Fibre Motor Mount Pulley can be used to mount all 3 combinations!
On this Electric Deck you get the following items included

This Electric Deck is constructed using the following components & parts...

------------------------------------------------------------------------------------
----------------------------------------------------------------------------

CUSTOM Boards by TRAMPA are sold to you Un-Assembled with the absolute bare minimum of compoents associated to it as standard. We do this to firstly keep the unit price down as low as possible & secondly so that Dudes that already have many of the items that come as standard with the LOADED board, (remotes, Bags, charger etc) so that these dudes they dont end up with 2 of basically the same thing... Many of our customers are smart minded with mechanical experience & are often very eager to make the final part of the assembly of the board themselves. By sending the board Semi-assembled means that a Luxury bag is not required for additional protection suring the shipping process, which menas the box we send the un-assembled items in is much smaller, using much less space in the lorry when shi[ing means the shipping is also sometimes considerably cheaper (Depends on the location)...  Making the assembly is not so difficult, any basic experience will of course help, but there are video manuals in the tab above & lets face it, if you ride your E-Mtb properly you will need to maintain it and this will inevitably mean sometime you have to take things apart, so by completeing the final part of assembly yourself means that you get to learn how the board really works and which parts would need more servicing than others, and just generally get a good understanding of the board all round.....

----------------------------------------------------------------------------

BATTERIES ARE NOT INCLUDED in the sale in the majority of the products that TRAMPABOARDS Ltd sells. Batteries are expensive to purchase & as they can be deemed as dangerous can very difficult to ship, especially internationally. 
We realised this long ago & decided to incoporate the problem into our design. We realised that although its a bit of a pain in the ass to have to purchase the cells seperatly, its far easier, less complicated & less expensive on the shipping side of things & lets face it there are plenty of companies specialising in the distribution of the cells all around the world all selling them much cheaper than what we could supply them, so in an attempt to side step the shipping problems & save you some cash, that in most cases its up to you to understand the different cell options, resource what us avaiable to you & for you too finally purchase them yourself locally.
SO,
Unless you are a UK customer (or it maybe a customer that can receive a delivery by raod so maybe some EU Countries also soon), in most instances, batteries need to be purchased separately by the customer.
Batteries are in huge demand as there has been huge growth in all electrical products on the market, specially in the DIY side of things which is kind of where the TRAMPA BOARD position's intself in the market... So in our design we offer alternative solutions to be able to power your board using Li-Po of Li-Ion cells... 
There are links to batteries that fit all the boxes here & Depending on how far you wish to go on a single charge will determine what cells you should fit.
As a guide & roughly speaking, 1000mAh (1Ah) is roughly the equivalent to 1 mile of average riding, this is very factor dependant & there are many factors determining the outcome such as, Wheel size & tyre pressure, road surface, the weight of rider, the rate of acceleration, & the top speed they cruise at, the gradients the boards are being ridden on & of course the gearing selection of the rider....
Using the different sized Battery boxes will give varying battery options that can fit the space. In the Classic Monster Box its possible to get upto 22A cells fitted into the box, alternatively that same box will fit TRAMPA's 21A Cell Pack. Classic MONSTER Boxes can be fitted to any size Deck, but if you want the furthest range then you need to fit the MASSIVE MONSTER Box, this is capable of fitting the 21700 12s7p cell pack & using the best cells out there capable of 35Ah of range.
If you are a UK or Customer it is now possible to purchase the 18650 or 21700 cells for the Cell Packs from TRAMPA.

----------------------------------------------------------------------------

WARNING!!!
Mountain-Boarding, Long-Boarding, Electric Mountain Boarding, Kite-boarding, Skate-boarding, infact any version of boarding of any kind, is inherently dangerous. Accidents are deemed as 'part of the fun' & are most likely inevitable.
To limit injury in the event of an accident, it is advised that you should wear as much protective clothing as you can bare to wear in an attempt to protect yourself from injury. When miss-used all kinds of exceptional injuries can happen, including death in rare instances, so always take care & never takes risks if you are not prepared to bare the consequences. You, the rider, is & are 100% fully responsible for your actions & or any accidents that may occur from riding any TRAMPA BOARD.

----------------------------------------------------------------------------

We advise that you never ride on the roads & most importantly, if you do ride on roads that you always ride well away from any traffic. Hitting a car, bus or Lorry whilst riding a skateboard will most likely result in death so we advise you dont do it. Anyway in most countries around the world it is still illegal to ride the devices we sell on the roads or highways & it has been herd of that crime busting Police from all around the world, do in fact have the power to even confiscate your device, so always be respectful when negotiating with the authorities over legislation of whats right or wrong & your right to ride the roads.... Here in the Uk we have no rights to ride on the roads so let that be a warning.

If there is no cycle path for you to ride then please choose the sidewalk or pavement instead of the road & then take your time & steer well clear of anything thats moving... Give way to all pedestrians, most of them have ear ohones in & do not hear you coming so go steady and dont startle by wizzing past them closely & in particular when riding off road look out for, give priority too & give plenty of space to pass dog walkers as they often have an excited animal pleased to see you at the end of a tether, which of course can easily get tangled with you & your equipment & well, lets face it we don't want to hurt the doggie, upset the waker or hurt the rider & where always possible stay well away from all/any moving traffic. Always expect the worst scenario to happen in all cases as vehicle drivers will always win on who comes off best after a collision if competing to be in the same space at the same time, so we beg you to please never take a risk, its just not worth it.

----------------------------------------------------------------------------

Always ride with as much impact protect equipment as you can possibly bare to wear, accidents are inevitable & you are 100% responsible for your own safety at all time, so please check your board often for anything broken or loose & take care as you proceed on the board as these things are very powerful, dangerous in the wrong hands....!!!

What Ply ORRSOM Longboard deck do you require...?
What Ply ORRSOM Longboard deck do you require...?

14ply ORRSOM Longboard - FIRM
14ply ORRSOM Longboard - FIRM

15ply ORRSOM Longboard - STIFF
15ply ORRSOM Longboard - STIFF

16ply ORRSOM Longboard - STIFFEST
16ply ORRSOM Longboard - STIFFEST

Do you want us to set up your ride in REGULAR or GOOFY??
Do you want us to set up your ride in REGULAR or GOOFY??

Please set me up in a REGULAR ride Style (Left foot forwards)

Please set me up in a GOOFY ride Style (Right foot forwards)

Do you want HYPA, SUPERSTAR or MEGASTAR hubs?
Do you want HYPA, SUPERSTAR or MEGASTAR hubs?

6 Spoke HYPA Hubs
6 Spoke HYPA Hubs

5 Spoke SUPERSTAR Hubs (+£40)
5 Spoke SUPERSTAR Hubs (+£40)

5 spoke 8 Inch OFF-SET MEGASTAR hubs (+£100)
5 spoke 8 Inch OFF-SET MEGASTAR hubs (+£100)

5 spoke 8 Inch CENTRE-SET MEGASTAR hubs (+£100)
5 spoke 8 Inch CENTRE-SET MEGASTAR hubs (+£100)

Quantity required:
We have enough parts to make…  
From £950 - each

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

The ORRSOM Longboard is as its name suggests. ORRSOM!!

The world needs to wait no longer, TRAMPA's ORRSOM Longboard deck is finally here! Measuring 985mm tip to tip & trimmed with 5º of negative camber around the edges to give extra control allowing the rider to take harder turns, whilst still made from the amazingly flexible & totally un-breakable TRAMPA Composite material, the ORRSOM longboard deck has been given a Unique split at the tip of the deck, allowing a special 'Docking Connection" to the Baseplate of the amazing 12Fifties Extra Wide Longboard Trucks which in turn assemble harmoniously to give 3 different ride heights to suit the 3 different wheel sizes that fit this amazing Electric ORRSOM Deck to do all 3 all things! ORRSOM!!

Available in 3 flex ratings (14ply - FLEXI, 15ply - FIRM & 16ply - STIFF) to suit all the different rider sizes & styles & supplied smothered from tip to tip in hardwearing JESSOP Grip tape & of course a TRAMPA Deck would not be a TRAMPA deck if is was not supplied with a Marine Grade Stainless Steel Bolt Kit to connect the Trucks with! Totally ORRSOM!!

Using the correct parts to convert, (which are available as kits in the accessoroes categories), you can assemble this board to ride on STICKIES 83mm or 90mm longboard wheels, 125mm GUMMIES longboard style wheels, 6.5 inch URBAN TREADS or the ultimate for comfort 7 inch INLINE TREADS.

BATTERIES CAN BE PURCHASED AT THIS LINK


 

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon