This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

TRAMPA Mountainboard with 9.525mm TITANIUM Axle ULTIMATE ATB Trucks RATCHET Bindings & Custom Wheels

TRAMPA Mountainboard with 9.525mm TITANIUM Axle ULTIMATE Trucks RATCHET Bindings & Custom Wheels TRAMPA Mountainboard with 9.525mm TITANIUM Axle ULTIMATE Trucks RATCHET Bindings & Custom Wheels 35° Mountainboard Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Hex Head Bolt kit ULTIMATE ATB TRUCK - 16 Inch wide 9.525mm TITANIUM Axel Build your own Custom TRAMPA Wheel - HYPA, SUPERSTAR, 8 Inch MEGASTAR, 9 Inch PRIMO or 9 INCH DEEP DISH MEGASTAR Wheels! Awesome selection from 5 Inch to 9 Inch, on & off road! Amazing!! BLACK 12mm ATB Bearings - 12mm x 28mm axle ABEC 5 rated with conversion spacers x8 Custom made Ratchet Bindings exact to your requirements TRAMPA Mountainboard with 9.525mm TITANIUM Axle ULTIMATE Trucks RATCHET Bindings & Custom Wheels
RRP
£600
inc tax
schematic

flexometer

 LEARN to MOUNTAINBOARD      Compare your talent    Follow the Media    RIDE a Mountainboard Centre

CUSTOM Mountainboard Pre-Drilled Deck with Grip & Bolt Kit

TRAMPA's Original 9-69 35° Short Mountainboard deck is the perfect deck option for "Advancing teenagers" & "Intermediate adult" sized riders. Being shorter in overall length, its excellent for big airs, fast rotations & any types of freestyle use but can of course also be ridden down a track or basic Grassy slopes..... The 35° tip means it needs to be fitted to spring trucks. Spring Trucks are much more robust than Skate Trucks. Spring Trucks also offer a lot more custom adjustment, resulting in more stability to the rider, especially when compared to the 15° deck with Skate Trucks. Its dimensions make it excellent for all sizes of rider from youngster to adult starter. It can be used for Mountain Boarding or Kite Boarding.  Its often purchased as a Blank deck or as an Up-Grade to replace a broken or non responsive wooden deck supplied by other brands & will also fit to Scrub channel & MBS Matrix Trucks.

The Original 35° Short is available in 4 different flex rates, 12ply is the most flexible, 15ply is the stiffest. Please use the FLEXOMETER in the TAB ABOVE for guidance as to which is the most suitable ply deck for you or mail this link if you need some extra guidance. The 35° Short is supplied as Drilled, Edged, Sanded with Grip-Tape & of course with a complete deck Marine Grade Stainless Steel Bolt Kit!


TRAMPA’s famous range of indestructible Decks are unlike anything else on the market. Tailored to a riders' weight, height & ability – TRAMPA DECKS give unrivaled responsiveness & confidence in the board when riding.

Created to replace dull unresponsive wooden decks & reinvent the off-road riding experience, TRAMPA decks bring a whole new riding-experience. With insane ‘pop’ & shock-absorbing flex, TRAMPA decks are the #1 choice for freestyle riding & comfortable cruising.  

Made using a secret re-enforced glass and plastic composite (originally developed for light-weight military applications), TRAMPA decks are indestructible. In 17 years of excessive & harsh testing - pushing the decks to their limits (inside & out of intended applications) - there has never been a single break!

TRAMPA decks are measured in “Ply”, referring to how many layers of ‘secret-composite’ are used when making the deck. A lower ply deck will be flexi-er & lighter than a higher-ply one. Generally we recommend higher ply decks for heavier riders, and lower for lighter riders – but flex, pop, and stiffness are all a matter of taste. Our Ply-ratings range from 11 - 18 in various lengths & shapes – meaning there’s a perfect TRAMPA deck for everyone!

TRAMPA decks have 35°, 15° or 0° Truck Mounting Angles, in order to work with the various steering systems used across different applications.
35° Decks – Work in perfect harmony with TRAMPA’s amazing Spring Trucks – a highly tuneable steering system designed give optimal responsiveness at 35°.
15° Decks – Fit to ATB Skate Trucks – a lightweight & cheaper steering system, perfect for lighter riders & kiteboarders.
0° Deck – Our ORRSOM Longboard Deck uses a special split-tip that allows 12FIFTIES Longboard trucks to be mounted at 3 different heights. 


How are they made?

The TRAMPA™ deck is made from a re-enforced glass and plastic thermo composite. Chosen because it gives a superior strength-to-weight ratio, whilst (unlike carbon fibre) remaining flexible. It is able to withstand huge impacts, forces and flex's that would shatter other materials.

Specially formulated, and presented in a thread like format, just like cotton. From there, it’s woven to our desired width, and placed it onto a roll. Pre-shaped, polished-aluminium moulds are used to give the material the dimensions and surface quality we require – this is where we vary the layer quantity of the composite in the mould, & control the amount of flex and pop in the resulting deck, giving us our Ply Ratings.

A special seal is used to create a high-pressured vacuum, then mould is then placed in a special oven to cook for about 2 hours. As the air is sucked out, the heated material becomes fluid – then at the crucial moment heating is turned off and the moulds are cooled, resulting in one solid piece! The decks are then cut out using a high-pressure water-cutter, resulting in a razor sharp finish to the edge of the deck.

The decks are then finished by hand. The binding and grab handle fixing holes are measured and drilled by hand, Metal files are used to take away the sharp edge of the deck and they are then rubbed smooth with a block and various grades of sandpaper.


TRAMPA are happy to announce that we can now offer CUSTOM PAINT JOBS on our decks. We’ve been releasing our parts in an amazing selection of colours - and now it’s time we offer the deck to match!

We’re luckily sited next to an awesome car spray shop, which are happy to take on some of our decks and make them shine! They know their paint, and know techniques for making any colour pop, without adding too much weight to the finished deck - guaranteeing a perfect & even finish that’ll last for years.

We’ve got a wide range of colours for you to pick and choose from, or you can send over a pantone of your own and we’ll match it the best we can!

Custom Sprayed Decks costs £100 extra, and should be ready to ship two weeks from your order.

TRAMPA BOARDS LTD produce the finest Mountainboard Decks & Components on the market today. Uniquely, TRAMPA tailors their decks specific to the rider's weight, height & riding ability - then custom constructs the components by hand to order to give you the customer a totally bespoke board, made specially just for you!

The stiffness of a TRAMPA deck is measured in "Ply", referring to how many layers of the secret formula material are used to make the deck. The more ply added, the stiffer & heavier the deck will be, ranging from 11-15ply in the short decks & 15-17ply in the long - meaning there’s a perfect TRAMPA deck for everyone!

TRAMPA BOARDS LTD produces precision-made, performance-enhancing sporting equipment, designed to increase your off-road boarding experience. TRAMPA decks are universally fitting & can be drilled to fit all Truck or Binding systems known - this makes TRAMPA decks the perfect option when choosing an upgrade for your existing non responsive wooden deck, or laminate deck setup. TRAMPA decks have proven to be totally indestructible beyond expectation - throughout years of excessive testing, regardless of all excuses; including excessive rider weight, low deck ply or level of impact, nobody has ever broken a TRAMPA deck!

Smaller/lighter riders benefit from shorter & lighter low ply decks such as the 12ply 15° short, which works perfectly with the lightweight Skate Trucks. Whereas heavier riders need longer, stiffer & generally more robust equipment such as the 17ply 35°long with spring trucks. TRAMPA produces the lightest decks on the market, & also some of the heaviest, depending on the weight & ride style of the rider. One thing for sure is that you'll always get the same perfect performance & you’ll never break your TRAMPA deck, regardless of how much you weigh or which one you buy.

Please see the flexometer guides to help you find your perfect deck. All the flexometer ratings are to be interpreted according to the rider’s criteria - everybody has a different demands & opinion as to which deck will be the exact model for them. If you’re still unsure as to what the best ply & deck is for you & would like some guidance then please fill in the "Which deck for is me questionnaire" by mailing this link.

TRAMPA's 35° Short Mountain board Deck can be used for Mountain Boarding or Kite Boarding, the perfect deck option for ‘advancing teenagers’ & ‘intermediate adult’ sized riders. Being shorter in overall length, its excellent for big airs, fast rotations & any type of freestyle use, but can of course also be ridden down a track or basic Grassy slopes. The 35° tip means it needs to be fitted to spring trucks. Often purchased as a blank deck or as an up-grade to replace broken or non responsive wooden decks supplied by other brands.

The 35° Short is available in 4 different flex rates, 12ply being the most flexible & 15ply the stiffest. The 35° Short can be supplied as a blank deck, drilled, edged & sanded, gripped & with/without a complete deck Marine Grade Stainless Steel Bolt Kit.
TRAMPA's 35° Long Mountain Board Deck is the perfect deck for all Adult sized riders of all abilities. The 35° Long Deck can be used for all principles of Mountain Boarding from Big-Air Freestyle to gentle slope free-riding. The 35° Long's straight sides & simple radius shaped tip, makes it perfect for customisation, as this deck is often purchased as a Blank deck to replace broken or non responsive wooden decks.

The 35° Long is available in 3 different flex rates, 15ply is the most flexible, 17ply is the stiffest. The 35° Long can be supplied as a Blank deck, Drilled, Edged & Sanded, Gripped & with/without a complete deck Marine Grade Stainless Steel Bolt Kit!
TRAMPA's 35° HOLYPRO Mountain Board Deck is so called because of its special Weight Saving Holes. It is the #1 option for all top level Riders, including all of our Pro Team Mountainboard Riders! Being Slightly shorter than the 35° Long and slightly longer than the 35° Short, the 35° HOLYPRO deck offers the best of both worlds in terms of performance & weight.

The 'Frogmouth' cut out shape on the tip of the deck is the same shape as the hole in the VERTIGO & ULTIMATE Trucks. This allows you to uniquely see through your Deck & into the Truck during operation. These impressive holes do not only look awesome but they also save you lots of weight right at the critical tip of your deck, allowing much more nimble-ness without removing any of the stiffness or performance from the deck!

Its Unique weight saving hole in the tip of the deck means its drill pattern will only fit to TRAMPA Spring Trucks. The 35° HOLYPRO comes as standard pre Drilled to fit your TRAMPA TRUCKS but the bindings holes are left blank for your customisation. Please select from the drop down menus if you want to drill the bindings yourself or if you would like TRAMPA to neatly do this for you at NO EXTRA CHARGE. The 35° HOLYPRO also comes as standard with Grip Tape already fitted, a special Marine Grade Stainless Steel Complete Deck Bolt Kit & any choice of Vinyl Stickers fitted.

TRAMPA's 35° HS11 Brake Deck is taken from the same mould & uses the same cut out pattern as the 35° HOLYPRO Deck BUT it does not have the same weight saving holes at the 'Tips' or in the Footstance area cut into it. Either one of these 2 shaped decks (or a seriously modified 35° Long Deck) must be used if you wish to fit the MAGURA BRAKES or should you wish to convert your Deck to be used with an ELECTRONIC ENGINE!

The MAGURA HS11 Brake system fixes neatly to the specially modified INFINITY & VERTIGO Brake Hangers, but the slight bulk of the Brakes means they need some space around the 'Tip of the Deck' in order to be mounted & operate correctly. Without the extra space given around the 'Tips of the Deck', the brakes will get caught on the side of the Deck, causing damage & steering issues.

Being slightly shorter in length than the 35° Long BUT slightly longer in length & nearly as light as the 35° Short, the 35° HS11 Brake Deck offers the best of both worlds in performance BUT with the additional space to be able to fit the Brakes.

TRAMPA's 35° HOLYPRO Electric Mountain Board Deck has been specifically created to work in conjunction with TRAMPA's stunning new range of Electrical products.

It is packed full of NEW & very special features completely unique to TRAMPA. The special water cut 'Oval HOLYPRO Holes' have been re-positioned 'Asymmetrically', allowing the deck to be drilled for both Regular or Goofy Riding styles, whilst gaining space in the center of the deck at the same time so that the amazingly flexible (& of course still un-breakable) deck can accommodate our special new features!

The first new feature allows the perfect fitting of the super flexible silicone coated Motor cables that carry the battery power from the recommended surface mounted ‘MONSTER Box', which routes the cables out through specially sealed off exit holes in the underside of the Monster Box, into a special 'CNC precision cut channel’ in the deck, cutting 8mm deep across the surface of the center of the deck, underneath the riders trailing foot & through the 2nd new feature - a special 'Cable Hole' in the tail end of the deck. The Motor cables are covered using our 3rd NEW feature, by using a PCB which also houses the Motor Sensor cables, the VESC Cables come out the same hole in the center of the Monster Box & are plugged into the PCB, which is then glued & screwed into position in the deck, protecting & holding the position of the Motor cables. The motor & sensor cables from the motor are fed around the trucks in a tidy, non-interfering route so that the adjoining bullet connecters align perfectly & connect neatly into the battery cables.

ULTIMATE ATB TRUCK - 16 Inch wide 9.525mm TITANIUM Axel

TRAMPA's ULTIMATE TRUCK is a slimmed down, super light-weight version of the original Infinity Truck BUT 30% lighter!! Made in exactly the same way, using CAST Alloy for the body of the HANGERit is CNC machined removing the bulk of the material, reducing weight substantially, without altering any of its critical strength. The ULTIMATE hanger is fitted with 9.525mm TITANIUM AXLES instead of the regular 12mm Solid Steel axles found on the INFINITY Trucks or the 12mm Hollow Steel Axles on the VERTIGO Truck. TITANIUM is 10 times stronger (when compared weight for weight) but weighs less than half the weight of steel!

The Alloy Hanger is attached to an Aerospace Grade Aluminum Baseplate. The Aluminum comes as a block & is rammed through an Extrusion mould, coming out the other side as one long piece a bit like Playdoh! It gets T6 HEAT TREATED gaining maximum molecular strength during the process, before the precision CNC machine goes to work creating the final shape & removing excess material reducing weight but not effecting any of its critical strength n the process.

The Hanger & Baseplate 'Kingpin Holes' are also CNC precision milled, insuring the Trucks assemble like a dream. Nylon Bushings are inserted into the Kingpin Holes supplying a flush connection, eliminating potential wear between the moving metal parts. The Titanium Kingpin pushes through the Kingpin Holes connecting the 2 integral parts together, allowing the steering to happen... Everything fixes together perfectly enabling the ULTIMATE TRUCKS to provide problem free precision riding! 

SPRINGS, loaded with TRAMPA DAMPA's are squeezed by hand, into the mounting positions between the Hanger & Baseplate. When anchored in position they give resistance to the steering. The steering resistance can be pre-set to your weight, riding ability & personal preference by changing the TRAMPA DAMPA to a stiffer/softer hardness. TRAMPA DAMPA's come in 5 different hardness's to suit all riding styles. The springs can also be ADJUSTED on the fly! By using a 4mm Allen Key you can further TUNE your steering by turning the SPRING ADJUSTER clockwise to give TIGHTER STEERING (fast riding) & turning anti-clockwise to give LOOSE STEERING (Carve riding). You can quickly adjust your board relevant to the conditions or terrain ahead... As your riding will improve over time you will demand more pre-tension from your steering, so don't over tighten your springs, instead change your Dampa's to something a little harder.

18.2mm spacers position the Wheels on the 9.525mm axles in the perfect location & 7/16ths of an Inch MGSS Half nuts screwed on at the end of the axle stop the wheel from working loose....

Build your own Custom TRAMPA Wheel - HYPA, SUPERSTAR, 8 Inch MEGASTAR, 9 Inch PRIMO or 9 INCH DEEP DISH MEGASTAR Wheels! Awesome selection from 5 Inch to 9 Inch, on & off road! Amazing!!

The 6 Spoke HYPA Wheel is the lightest & strongest plastic injected 7 & 8 inch Hub / Wheel on the market today! Its produced using original DuPont ingredients & the best Injection Moulding machinery, no quality expense is spared during the production of this amazingly strong little hub!

During testing the HYPA Wheels performance surpassed all expectations. :-) This little 8 inch wheel proved to be so strong, when the "Crash Test Dummies" (i mean the Mountainboard Team Riders) inflated their tyres well beyond factory recommendations! (Tut-Tut Naughty-Naughty!) The extra inflation resulted in substantially faster roll speeds, giving them the extra time in the air to complete their huge freestyle moves & still have time land in 1 piece! I'm pleased to tell you there were no explosions from the over inflation to report whilst breaking a HYPA HUB is just about unheard of, something extraordinary has to go wrong before these hubs do! If you have seen some of the crazy stuff the MTB & KTB teams have put the equipment through over the years, with genuinely almost no problems to report, you will have no doubt of the HYPA WHEELS performance capabilities.

HYPA Hubs are available in loads of coordinating colour combinations its difficult to make the decision as to which option you like the most! You can choose from naked Matt Black or White to Painted Gloss Red or Gloss Blue with Painted Black or White TRAMPA Logo's or Printed in Winter or Army Camo, the choice is all yours... :-)

TRAMPA's HYPA hubs are held together using Marine Grade (A4) Stainless steel Nuts & Bolts & will never rust on you. Our bolts are perfect for bad conditions. Not only will the nuts & Bolts never rust on you all the Bolts used by TRAMPA have been dipped in a special Blue Locking Paste, whilst all the Nuts that TRAMPA uses are fitted with the world renowned Nyloc nylon nut locking system, all of these no expense spared small details ensure you get the absolute best product possible! To help prevent you from purchasing imitations, TRAMPA's HYPA Hubs are always TRAMPA embossed between the spokes proving our top quality! 

Your tyre requirements will be defined by the surface you are riding on, however you will be pleased to read that all of the HYPA Hubs will fit into any of the 7 inch Tyres or 8 Inch Tyres on the TRAMPA website. TRAMPA Hubs are also compatible with all known 8 Inch Tyres that are currently on the market, including any other Mountainboard or Dirt Scooter brand.

TRAMPA’s very own & genuine ABEC 5 rated Bearings, push perfectly into the 'Centre Set' bearing housings either side of the hub. The bearings are supported internally by use of a 'Bearing Support Spacer' sitting on the axle in the middle of the hub, guaranteeing the position of the bearings & the smoothest spin rate possible. TRAMPA's Bearings will fit onto 9.525mm, 10mm & 12mm Axles. The metric measurement of 9.525mm, is equal to the US Imperial measurement 3/8ths of 1 inch. Bearing Reducer Sleeves downsize your 12mm Bearings to fit onto 10mm Metric Scooter Axles or 9.525mm (3/8ths of an inch) Imperial Skate Axles. Bearings can be supplied at 50% of the usual retail price when purchased with a wheel... 2x Bearings cost just £2.50 per pair (usually £2.50 each), resulting in a £10 saving per set of 8x bearings, 8 bearings are enough for a set of 4 wheels!

TRAMPA's 200mm x 50mm - 8 Inch wonder wheels are the primary choice sized wheel for many inventors developing sporting equipment requiring very strong whilst very light weight, small pneumatic wheels for their applications to work correctly. Mountainboards, Kiteboards, 2Wheel, Dirt-Scooters, Bikes Skates, Sledges, Trikes, Skikes, Model Planes, Single Seater Planes, Dog Sledding, Dirt Skiing, Transportation Chariots & now lots of exciting electronic applications all due to come to the market very soon, all require an 8 inch wheel for their best movement... If you have a wheeled project on the go & you would like to fit TRAMPA's 8 inch wheels onto it, then in your design you need to use a 12mm axle & you will need to give an axle mounting space of 34.2mm in order to fit the TRAMPA Hubs correctly.

Custom made Ratchet Bindings exact to your requirements

TRAMPA's RATCHET BINDINGS are the number 1 choice of Bindings for Mountain Boarding. The Ratchet Buckle mechanism allows the rider to lever the bindings very tight, much tighter than what is normally achievable compared to other styles, e.g. Velcro Bindings, treating the rider to a locked in & fully connected to the board sensation. TRAMPA Bindings wrap snugly over the top of your foot but firm footwear is advisable.... The EVA Foam Padding is 'Ribbed' & 'TRAMPA Embossed' on the underside of the Footstrap. These fine details helps maintain the foot locked into the Bindings whilst riding over rough terrain.   

A Special Hook on the Base of the Ratchet Buckle locates into a special slot on the top of the Footstrap. This clever 3 point connection prevents any movement in the connection of the Straps allowing the rider the confidence in their equipment to concentrate purely on their riding. Although the Ladder strap will ultimately wear over time, it has been re-enforced on both sides at its base, guaranteeing performance when riding.

Stainless steel Dome Headed Bolts connect through the Footstrap into L-Brackets ensuring no discomfort to the foot. The L-Brackets are 'multi positional' allowing the rider the exact foot-stance they require. TRAMPA Bindings are supplied with a Marine grade A4 Stainless Steel deck fixing kit included. Ratchet style bindings are the serious Mountain Board rider’s primary choice binding! Ratchet Style bindings work at their absolute optimum when combined with TRAMPA Heel Straps

TRAMPA's Original 9-69 35° Short Mountainboard deck is the perfect deck option for "Advancing teenagers" & "Intermediate adult" sized riders. Being shorter in overall length, its excellent for big airs, fast rotations & any types of freestyle use but can of course also be ridden down a track or basic Grassy slopes..... The 35° tip means it needs to be fitted to spring

READ MORE...

Complete Deck Weight

35° Mountainboard Deck 12 ply 13 ply 14 ply 15 ply
Blank Deck Weight 2,175g 2,350g 2,525g 2,700g
Component Weight 4,194g 4,194g 4,194g 4,194g
Complete Deck Weight 6.4 kg 6.5 kg 6.7 kg 6.9 kg

Component Weights

ULTIMATE ATB TRUCK - 16 Inch wide 9.525mm TITANIUM Axel1,635g
Custom 8 inch wheel Wheel - HYPA or SUPERSTAR with any Tyre that fits :-)1,868g
Custom made Ratchet Bindings exact to your requirements502g
12mm ATB Bearings with 9.525mm Bearing Reducer Sleeves x8190g
Total component weight4,194g
ULTIMATE ATB TRUCK - 16 Inch wide 9.525mm TITANIUM Axel
Custom made Ratchet Bindings exact to your requirements
Build your own Custom TRAMPA Wheel - HYPA, SUPERSTAR, 8 Inch MEGASTAR, 9 Inch PRIMO or 9 INCH DEEP DISH MEGASTAR Wheels! Awesome selection from 5 Inch to 9 Inch, on & off road! Amazing!!
35° Mountainboard Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Hex Head Bolt kit

Blank deck weight chart

35° Mountainboard Deck 12 ply 13 ply 14 ply 15 ply
Blank Deck Weight 2,175g 2,350g 2,525g 2,700g
General Flex Rating flexi firm stiff very stiff
35° Mountainboard Deck
ULTIMATE ATB TRUCK - 16 Inch wide 9.525mm TITANIUM Axel
Custom 8 inch wheel Wheel - HYPA or SUPERSTAR with any Tyre that fits :-)
Custom made Ratchet Bindings exact to your requirements
Please select what Shape Deck you would like
Please select what Shape Deck you would like

9-69 Original 35º SHORT Deck Shape
9-69 Original 35º SHORT Deck Shape

9-69 Original 35º LONG Deck Shape (+£25)
9-69 Original 35º LONG Deck Shape (+£25)

9-69 Original 35º HS11 Deck Shape (+£25)
9-69 Original 35º HS11 Deck Shape (+£25)

9-69 Original 35º HOLYPRO Deck Shape (+£50)
9-69 Original 35º HOLYPRO Deck Shape (+£50)

9-69 Original 35º Electric Deck Shape with PCB (+£100)
9-69 Original 35º Electric Deck Shape with PCB (+£100)

10-69 NEW 4WD Electric Deck inc 2x PCB's (+£150)
10-69 NEW 4WD Electric Deck inc 2x PCB's (+£150)

10-73 NEW BigBoi HS11 Mountainboard Deck (+£75)
10-73 NEW BigBoi HS11 Mountainboard Deck (+£75)

10-73 NEW BigBoi Electric Deck Shape with PCB (+£150)
10-73 NEW BigBoi Electric Deck Shape with PCB (+£150)

10-73 NEW BigBoi 4WD Electric Deck inc 2x PCB's (+£200)
10-73 NEW BigBoi 4WD Electric Deck inc 2x PCB's (+£200)

Please select what colour hanger you need...
Please select what colour hanger you need...

ULTIMATE WHITE - CNC with 9.525mm Titanium Axles
ULTIMATE WHITE - CNC with 9.525mm Titanium Axles

ULTIMATE BLACK - CNC with 9.525mm Titanium Axles
ULTIMATE BLACK - CNC with 9.525mm Titanium Axles

Do you want STICKIES, HYPA. SUPERSTAR, PRIMO or MEGASTAR hubs?
Do you want STICKIES, HYPA. SUPERSTAR, PRIMO or MEGASTAR hubs?

Please fit STICKIES Longboard Wheels

Please fit 6 Spoke HYPA Hubs

Please fit 5 Spoke SUPERSTAR Hubs (+£30)

Please fit 8 Inch MEGASTAR Hubs (+£100)

Please fit 9 Inch 3 spoke PRIMO Hubs (+£30)

Please fit 9 Inch MEGASTAR hubs (+£125)

What Style of Bindings do you want?
What Style of Bindings do you want?

VELCRO Style Bindings please

RATCHET Style Bindings please (+£10)

CAMLOCK Style Bindings please

LUXURY VELCRO Style Bindings please

Quantity required:
We have enough parts to make…  
RRP £600 - per deck

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
To see UPS shipping rates you need to login.

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon