This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

TRAMPA Electric SINGLE Motor STICKIES Street Carver with VESC, BEAST Box, Mini Spring Trucks & Stickies Longboard Wheels - CUSTOM

TRAMPA Electric SINGLE Motor STICKIES Street Carver with VESC, BEAST Box, Mini Spring Trucks & Stickies Longboard Wheels - CUSTOM TRAMPA Electric SINGLE Motor STICKIES Street Carver with VESC, BEAST Box, Mini Spring Trucks & Stickies Longboard Wheels - CUSTOM TRAMPA Electric SINGLE Motor STICKIES Street Carver with VESC, BEAST Box, Mini Spring Trucks & Stickies Longboard Wheels - CUSTOM TRAMPA Electric SINGLE Motor STICKIES Street Carver with VESC, BEAST Box, Mini Spring Trucks & Stickies Longboard Wheels - CUSTOM TRAMPA Electric SINGLE Motor STICKIES Street Carver with VESC, BEAST Box, Mini Spring Trucks & Stickies Longboard Wheels - CUSTOM TRAMPA Electric SINGLE Motor STICKIES Street Carver with VESC, BEAST Box, Mini Spring Trucks & Stickies Longboard Wheels - CUSTOM TRAMPA Electric SINGLE Motor STICKIES Street Carver with VESC, BEAST Box, Mini Spring Trucks & Stickies Longboard Wheels - CUSTOM TRAMPA Electric SINGLE Motor STICKIES Street Carver with VESC, BEAST Box, Mini Spring Trucks & Stickies Longboard Wheels - CUSTOM 35° Original 9-69 Carve Deck Drillage for Trucks - Accurate and neat 35° TRAMPA Carve Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Countersunk Bolt kit 35° TRAMPA Carve Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Countersunk Bolt kit 35° TRAMPA Carve Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Countersunk Bolt kit Custom MINI TRAMPA Trucks with Spring & Dampa's or BARRELS TRAMPA Electric SINGLE Motor STICKIES Street Carver with VESC, BEAST Box, Mini Spring Trucks & Stickies Longboard Wheels - CUSTOM TRAMPA STICKIES Longboard WHEELS 83 or 90mm x set of 4 R6-2RS Abec 7 TRAMPA STREET CARVE Bearing used to fit STICKIES Longboard Wheels to 9.525mm Axels (9.525 x 22.225 x 7.14mm) x3 R6-2RS Abec 7 TRAMPA STREET CARVE Bearing used to fit STICKIES Longboard Wheels to 9.525mm Axels (9.525 x 22.225 x 7.14mm) x3 R6-2RS Abec 7 TRAMPA STREET CARVE Bearing used to fit STICKIES Longboard Wheels to 9.525mm Axels (9.525 x 22.225 x 7.14mm) x3 R6-2RS Abec 7 TRAMPA STREET CARVE Bearing used to fit STICKIES Longboard Wheels to 9.525mm Axels (9.525 x 22.225 x 7.14mm) x3 Original STREET Carver Motor Mount with Motor Axle Support kit - SINGLE 1x Custom TRAMPA DC Motor with Filters STREET CARVER 33 or 37 Tooth Pulley Kit with 330mm x 15mm Belt for STICKIES Wheels VESC 6 MkV In CNC T6 Silicone Sealed Aluminium Box with Genuine XT90 Connectors - Vedder Electronic Speed Controller TRAMPA Special VESC 6 MkV In CNC T6 Silicone Sealed Aluminium Box with Genuine XT90 Connectors - Vedder Electronic Speed Controller TRAMPA Special BEAST Box options for MOUNTAINBOARDS 6 - 16Amp 12A Bigger BEAST BOX & Single VESC 6 Cable Kit
From
£700+
schematic

flexometer

By altering the number of layers of material that we add into the mould, we are are able to tune the final performance of the TRAMPA decks relevant to the riders weight height & ability. Please use the FLEXOMETER above as a guide to help you choose the right ply board for you. TRAMPA's FLEXOMETER information is to be interpreted as a 'GUIDE ONLY' as there is no fixed rule as to which is the exact right deck for you. The weight, height & ability of the rider will all help determine which is the right sort of deck for you, but of course the most important factor is personal preference as to how the rider wants their deck to feel.... Some riders like it flexi, some like it firm, some like it very very stiff.... It depends on what you are doing on your board, i.e. freestyle, freeride, boarder-cross, altho there is guidance there is no right & no wrong just personal preference but when purchasing a deck from TRAMPA we want to make sure you get it exactly the way you want it! so if your stuck as to which one is the best for you them please drop as a line...

Setting a Carve board up with STICKIES Longboard Wheels gives you a street-ripping machine! With 50mm of ground contact, STICKIES will grip the road like nothing else – even in the tightest turns (hence the name…).

STICKIES are compatible with 33 or 37 tooth Slave Wheels, and when paired with the correct Motor Pulley, will reach over 30mph!

Check out the Gearing Chart for more information.

STICKIES come in 83 or 90mm size options, and are available in a range of Shore-Hardnesses. Softer wheels will stick to road more, whereas harder wheels are perfect for some high-speed sliding.

Blue 74a – Super-soft
Black 76a - Soft
White 78a - Regular
Red 81a - Hardest

 

TRAMPA’s amazing range of Electric Carve Boards have been described as “A Whole New Riding Experience” – & that’s not wrong.
Available with STICKIESGUMMIES & URBAN TREADS wheels, TRAMPA’s Carve Boards look, feel & perform unlike anything else on the market.

The beauty of the Carve board is in the set up – or rather – how you set it up… One choice of parts creates a board capable of straight-line bombing at insane speeds. Another choice & it’s a board so buttery it can turn any corner on a dime.

Carve boards are all available with Single or Twin Motors. Single motor boards are easier on the wallet, & will still hit the same eye-watering speeds as twin motors.
Twin motors split the brunt of the work, so less chance of motors over-heating, & twice the grip - so if you’re looking for a board that’ll fly off the line, you’ve got to go twin!
Carve boards can fit any of the 118-160Kv 6364 DC Motors we offer. 118Kv Motors are the choice for particularly hilly areas, whereas 160Kv Motors will carry you to some insane speeds!
Due to the extra space needed for two VESCs, we can currently only offer Twin Setups using the BIGGEST BEAST BOX.

Measuring just 850mm tip-to-tipTRAMPA’s CARVER DECKS are balanced between being small enough to carry on a bus - & long enough to still feel substantial & stable beneath your feet at speed.
Using 35° angled tips, Carver Decks have the same flex & ‘pop’ as TRAMPA’s MTB decks, & work in conjunction with MINI SPRING TRUCK steering systems.
Choice of 14-16ply, available as;
STANDARD (2350g)
HOLY PRO (2200g)

Carve boards come fitted with a rear-mounted BEAST BATTERY BOX. Rear-mounting the batteries ensures the deck doesn’t loose any flex or ‘pop’, while leaving all the space for freedom of foot-placement.
Carve Boards are compatible with Under-Board Battery Trays. Under-Board Battery Trays may look sleeker, but they sacrifice clearance on the bottom of the board, as well as the flex of the deck itself – BEAST BOXES solve both these issues.
Having the weight of the batteries over the rear helps to give the back wheels extra grip – perfect when carving-tightly.
Available in;
STANDARD (Space for 2x 6200mAh Zippy Compacts & 1x VESC)
BIGGER (Space for 2x 12000mAh Batteries & 1x VESC)
BIGGEST (Space for 2x 16000mAh Batteries & 2x VESC)

Carve boards use MINI SPRING TRUCKS - TRAMPA’s most multifunctional steering system yet! A scaled down & improved version of TRAMPA’s already-amazing Spring Trucks, MINI SPRING TRUCKS give three points of adjustment to fine-tune the steering resistance - through Spring Adjustors, various colours of DAMPA, & finally by installing the springs closer or further away from the Kingpin.
MINI SPRING TRUCKS use reversible hangers – giving two sets of trucks in one! The axles have been mounted in an offset position, so when the hanger is reversed, the wheelbase length, ride-height and performance of the finished board is changed.
12.5” wide with 9.525mm axles, available in;
INFINITY (817g).
VERTIGO (737g).
ULTIMATE (703g).

It’s possible to attach T6 Aluminum BULL BARS to your front truck, which not only knocks the road-kill out of the way & potentially mows the lawn as you go, but also allows you to connect all kinds of things from lights, cameras, Sat-Navs, or anything else you may need on the front end of your board.

Carve boards are able to fit any style of Bindings & Heel Straps we offer. Using bindings gives a whole new level of confidence & control over the board. Allowing you to really lean into turns, hop up curbs & tick tack - bindings are a true game changer on Carve Boards.

You will need to supply your own Batteries to make the boards move. There are many options when it comes to cells; desired range & budget usually determine the sort of cells you should purchase. People often ask us what cells to use - & there are hidden issues with some cells, such as availability, price, shipping restrictions, wrong connectors, or complexity of build (especially when it comes to making custom build batteries). Taking all these factors into consideration, we found a regular supply of good performance cells from a variety of suppliers & consequently built our Battery Boxes around them. Check out our RECOMMENDED BATTERIES page for help. Easy :-)


 

35° Original 9-69 Carve Deck

Measuring just 850mm in length, TRAMPA’s CARVER DECK is the perfect balance between being small enough to take on a bus, while still feeling substantial & stable under your feet at speed.

With 35° tips, Carve Decks have the same flex & ‘pop’ as TRAMPA’s MTB decks, making them the perfect ‘urban-board’ choice for Mountainboarders. Working in conjunction with Mini Spring Trucks, the resulting Carveboards have been described as “a whole new riding experience”.


TRAMPA’s famous range of indestructible Decks are unlike anything else on the market. Tailored to a riders' weight, height & ability – TRAMPA DECKS give unrivaled responsiveness & confidence in the board when riding.

Created to replace dull unresponsive wooden decks & reinvent the off-road riding experience, TRAMPA decks bring a whole new riding-experience. With insane ‘pop’ & shock-absorbing flex, TRAMPA decks are the #1 choice for freestyle riding & comfortable cruising.  

Made using a secret re-enforced glass and plastic composite (originally developed for light-weight military applications), TRAMPA decks are indestructible. In 17 years of excessive & harsh testing - pushing the decks to their limits (inside & out of intended applications) - there has never been a single break!

TRAMPA decks are measured in “Ply”, referring to how many layers of ‘secret-composite’ are used when making the deck. A lower ply deck will be flexi-er & lighter than a higher-ply one. Generally we recommend higher ply decks for heavier riders, and lower for lighter riders – but flex, pop, and stiffness are all a matter of taste. Our Ply-ratings range from 11 - 18 in various lengths & shapes – meaning there’s a perfect TRAMPA deck for everyone!

TRAMPA decks have 35°, 15° or 0° Truck Mounting Angles, in order to work with the various steering systems used across different applications.
35° Decks – Work in perfect harmony with TRAMPA’s amazing Spring Trucks – a highly tuneable steering system designed give optimal responsiveness at 35°.
15° Decks – Fit to ATB Skate Trucks – a lightweight & cheaper steering system, perfect for lighter riders & kiteboarders.
0° Deck – Our ORRSOM Longboard Deck uses a special split-tip that allows 12FIFTIES Longboard trucks to be mounted at 3 different heights. 


How are they made?

The TRAMPA™ deck is made from a re-enforced glass and plastic thermo composite. Chosen because it gives a superior strength-to-weight ratio, whilst (unlike carbon fibre) remaining flexible. It is able to withstand huge impacts, forces and flex's that would shatter other materials.

Specially formulated, and presented in a thread like format, just like cotton. From there, it’s woven to our desired width, and placed it onto a roll. Pre-shaped, polished-aluminium moulds are used to give the material the dimensions and surface quality we require – this is where we vary the layer quantity of the composite in the mould, & control the amount of flex and pop in the resulting deck, giving us our Ply Ratings.

A special seal is used to create a high-pressured vacuum, then mould is then placed in a special oven to cook for about 2 hours. As the air is sucked out, the heated material becomes fluid – then at the crucial moment heating is turned off and the moulds are cooled, resulting in one solid piece! The decks are then cut out using a high-pressure water-cutter, resulting in a razor sharp finish to the edge of the deck.

The decks are then finished by hand. The binding and grab handle fixing holes are measured and drilled by hand, Metal files are used to take away the sharp edge of the deck and they are then rubbed smooth with a block and various grades of sandpaper.


TRAMPA are happy to announce that we can now offer CUSTOM PAINT JOBS on our decks. We’ve been releasing our parts in an amazing selection of colours - and now it’s time we offer the deck to match!

We’re luckily sited next to an awesome car spray shop, which are happy to take on some of our decks and make them shine! They know their paint, and know techniques for making any colour pop, without adding too much weight to the finished deck - guaranteeing a perfect & even finish that’ll last for years.

We’ve got a wide range of colours for you to pick and choose from, or you can send over a pantone of your own and we’ll match it the best we can!

Custom Sprayed Decks costs £100 extra, and should be ready to ship two weeks from your order.

The 35° TRAMPA Street Carver deck is the latest deck in the TRAMPA range. It has been specifically shaped to work with the new Street Carver range of Truck steering systems. Choosing a low ply flexier deck makes carving on the street a fantastic sensation, whilst choosing a stiffer deck & adding DAMPA's into the Trucks tightens the steering turning the deck one of the fastest & most stable decks on the market!

The 35° TRAMPA Street Carver deck is available in 3 different flex rates, 14ply is the most flexible, 16ply is the stiffest. Please use the FLEXOMETER in the TAB ABOVE for guidance as to which is the most suitable ply deck for you or mail this link if you need some extra guidance. The 35° TRAMPA Street Carver deck is only supplied as Drilled, Edged & Sanded, Fully Gripped & with Marine Grade Stainless Steel Bolt Kit!

Regardless of which deck you choose, all TRAMPA Decks are totally Un-Breakable! We offer you a lifetime gaurantee! Our incredible composite material is so strong whilst still flexible, the material will not split, delaminate or break in any way regardless of the environment you use it in. TRAMPA decks are considered the "Poppiest" decks on the market, the performance is un-matched, you will fly higher & have more cushioned landings thanks to the performance of the deck! All TRAMPA deck's are customised to suit the riders weight, ability & personal preference.

Custom MINI TRAMPA Trucks with Spring & Dampa's or BARRELS

TRAMPA STICKIES Longboard WHEELS 83 or 90mm x set of 4

TRAMPA's incredible range of STICKIES Longboard Wheels have taken the world of Longboarding by storm! Produced using the highest grade of Ultra Premium Urethane, and available in either 83 or 90mm size options with a varying range of suitably colour co-ordinatied Urethane Hardnesses, the variety compliments all the different types of rider, covering all the different aspects of street riding. You will be pleased to learn STICKIES Longboard Wheels will fit to ALL Longboard, Street-board & Skateboard Trucks using 8 or 9.525mm Axles.

The re-enforced VENTED CORE of the STICKIES Wheel houses a Center-set bearing position. For those that don't know this means the bearings are housed centrally within the wheel. Being center-set ensures an even wear rate to the wheel ensuring maximum grip at all times, whilst guaranteeing a balanced "high speed spin-rate", thus making turning/sliding as predictable as possible! Not only does the vented core reduce weight, but it also increases airflow around the Bearings ensuring lower operating temperatures when running at high speeds...

The Vented Core also has an extra application... The Venting holes can be used in conjunction with a centering ring & some M4x40mm Socket Capped Bolts to lock into position, either a 33 or 37 Tooth Slave Wheel, to which the complete assembly can be connected to many applications using an electric motor, including the new TRAMPA Electric Longboards & Electric Street-Carver boards as well as many other products due onto the market soon!

Smothering the Vented Core of the STICKIES Longboard wheel is thick PREMIUM URETHANE. Choosing STICKIES will enable you to Carve & Turn like you have only ever dreamed of before, especially when mounted to the new TRAMPA Mini Spring Trucks which happen to turn & carve like nothing else! STIKIES Wheels will also fit to the new 12FIFTIES Trucks & all 8mm Longboard trucks on the Market.

The edges of all the STICKIES wheels are beautifully rounded allowing smooth transitional turns, whilst helping to avoid chipping & cracks at the same time. The rounded edge of the STICKIES wheel gives an overall contact surface of 50mm! Orbiting the outer edge of the BLUE STICKIES WHEEL is a coordinating BLACK TRAMPA logo.

STICKIES will accept regular skate size 608 2RS (8 x 22 x 7mm) bearings & made special for the TRAMPA Mini Spring Trucks, the R6 2RS (9.525 x 22,225 x 7.14mm) Bearings. All of TRAMPA's Longboard/Streetboard bearings are ABEC 7-9 rated & are designed for prolonged high speed use. 


TRAMPA's incredible range of STICKIES Longboard Wheels have taken the world of Longboarding by storm! Produced using the highest grade of Ultra Premium Urethane, & available in either 83 or 90mm size options with a varying range of suitably colour co-ordinatied Urethane Hardnesses, the variety compliments all the different types of rider, covering all the different aspects of street riding. You will be pleased to learn STICKIES Longboard Wheels will fit too ALL Longboard, Street-board & Skateboard Trucks using 8 or 9.525mm Axles.

The re-enforced VENTED CORE of the STICKIES Wheel houses a Center-set bearing position. For those that don't know this means the bearings are housed centrally within the wheel. Being center-set ensures an even wear rate to the wheel ensuring maximum grip at all times, whilst guaranteeing a balanced "high speed spin-rate", thus making turning/sliding as predictable as possible! Not only does the vented core reduce weight, but it also increases airflow around the Bearings ensuring lower operating temperatures when running at high speeds...

The Vented Core also has an extra application.... The Venting holes can be used in conjunction with a centering ring & some M4x40mm Socket Capped Bolts to lock into position, either a 33 or 37 Tooth Slave Wheel, to which the complete assembly can be connected to many applications using an electric motor, including the new TRAMPA Electric Longboards & Electric Street-Carver boards as well as many other products due onto the market soon!

Smothering the Vented Core of this 83mm Longboard wheel sits 19mm thick x 52mm wide of BLUE '74a' (Super Sticky) PREMIUM URETHANE. 74a Urethane is the softest Longboard wheel in the TRAMPA & is VERY GRIPPY!! Choosing the 74a Grippy option will enable you to Carve & Turn like you have only ever dreamed of before, specially when mounted to the new TRAMPA Mini Spring Trucks which happen to turn & carve like nothing else!

The edges of all the STICKIES wheels are beautifully rounded allowing smooth transitional turns, whilst helping to avoid chipping & cracks at the same time. The rounded edge of the STICKIES wheel gives an overall contact surface of 50mm! Orbiting the outer edge of the BLUE STICKIES WHEEL is a coordinating BLACK TRAMPA logo.

STICKIES will accept regular skate size 608 2RS (8 x 22 x 7mm) bearings & made special for the TRAMPA Mini Spring Trucks, the R6 2RS (9.525 x 22,225 x 7.14mm) Bearings. All of TRAMPA's Longboard/Streetboard bearings are ABEC 7-9 rated & are designed for prolonged high speed use. 

STICKIES Longboard Wheels are available in 83 & 90mm diameter options. A colour coordinating range of different urethane hardnesses match the performance characteristics of the different sizes of wheel. This range of options pretty much covers all the possible grip requirements found in street riding, allowing the rider to perform switch-back carve turns to high speed sliding. STICKIES Longboard Wheels will fit too any Longboard, Streetboard or Skateboard Trucks that use 8 or 9.525mm Axles!

The re-enforced VENTED CORE of the STICKIES Wheel, houses a Center-set bearing position. For those that don't know this means the bearings are housed centrally within the core of the wheel. This center set position delivers equal weight distribution on the straight & in the turns as well as give an even ware rate whilst guaranteeing a balanced "high speed spin-rate", thus making tight turns or sliding as predictable as possible. Not only does the vented core reduce weight in the wheel, but it also increases airflow around the Bearings ensuring lower operating temperatures gaining maximum roll speeds in the straights...

The Black Vented Core also houses a new & hidden application.... The Venting holes in the core can be used in conjunction with a Centering Ring & 6x M4x40mm Socket Capped Bolts to push though the wheel and lock into position a 33 or 37 Tooth Slave Wheel on the other side! The complete assembly can then be connected to many applications using an electric motor, including the new TRAMPA Electric Longboards & Electric Street-Carver boards as well as many other exciting products due onto the market soon!

Smothering the Vented Core of the Longboard wheel is 52mm wide of PREMIUM URETHANE. Urethane is mixed to different hardness's giving different performance characteristics to the different wheels, allowing options in performance according to the conditions for the riders, especially in longboarding where the difference in the right wheel on your board can be huge benefit... Below is a summary to the urethane hardness & wheel sizes we decided on...

BLUE 74a Urethane has only been used in the production of the 90mm wheels as the extra size in diameter demands the need for extra friction to handle the high speed forces that this size of wheel can be put through in high speed turns. If you like your steering loose allowing super fast tight switch back turns then using 90mm 74a Blue wheels is your option. 90mm 74a wheels will be enable you to carve & turn like you have never imagined before, especially when mounted to the new TRAMPA Mini Spring Trucks which also happen to turn & carve like nothing else before :-)

BLACK 76a Urethane is still a very grippy compound & we offer it on both 83 & 90mm wheel options. This compound in both sizes will satisfy the demands of most high speed Street-carvers looking to carve but not as tight but at higher speeds, the smaller wheel will turn tighter for sure but the larger size offers extra comfort over stones, twigs and debris kicking around in the street.

WHITE 78a Urethane is what we would describe as being a regular hardness for the size of wheel. It is available in both 83 & 90mm options and will still supply plenty of grip to carve but being slightly harder in compound it will happily run along at full speed for a long duration without being bothered in the slightest with friction.

RED 81a Urethane is the Hardest in the STICKIES range and most suit for straight line speed & of course sliding :-) The hardness is not really suitable for the 90mm range of wheels so we didn't produce it...

The lower edges of the STICKIES wheels are perfectly rounded, encouraging smooth transitional turns whilst helping to avoid chipping & cracks at the same time. The rounded edge of the STICKIES wheel gives an overall contact surface with the ground of 50mm! Orbiting the outer edge of the STICKIES Wheel is a colour coordinating TRAMPA logo!

Both 83 & 90mm STICKIES Longboard Wheels will accept regular skate size 608 2RS (8 x 22 x 7mm) bearings & made special for the TRAMPA Mini Spring Trucks, the R6 2RS (9.525 x 22,225 x 7.14mm) Bearings. All of TRAMPA's Longboard/Streetboard bearings are ABEC 7-9 rated & are designed for prolonged high speed use. 

VESC 6 MkV In CNC T6 Silicone Sealed Aluminium Box with Genuine XT90 Connectors - Vedder Electronic Speed Controller TRAMPA Special

Introducing the amazing VESC® 6 MKV Speed Controller, the fourth major product update of the world famous VESC 6 motor controller product line. Packed with a variety of amazing new features, this VESC motor controller is certainly worth of it’s pimpin’ gold logo.

The first VESC controller capable of hibernating, your board can conserve power while not in use - reducing power consumption to just 20μA – less than the self-discharge rate of the batteries. Or with automatic power off, your VESC controller can switch itself off after a set amount of time.

No more loop keys! Compatible with power buttons / switches, the VESC 6 MKV controller can be ready to go with a single press / flick. If desired, multiple devices can share a single button.

Roll-to-start – it’s possible to set your board to power up with a small kick/nudge!

In its development, no Mosfet switches were used - due to their tendency to eventually blow up. This saves on the additional costs of replacing them, & also adds to the longevity of the VESC 6 MKV.

When we developed the VESC 75/300 controller, it was obvious that most of its features would be handy to have in the VESC 6 controller format.  As a result, Benjamin Vedder took on the challenge and re-designed the entire PCB of the VESC 6 controller, to make new, powerful features available in a smaller & cheaper 60V rated package.

The VESC 6 MKV controller features THREE PHASE SHUNTS & adjustable CURRENT / VOLTAGE FILTERS - detecting any motor attached more precisely and reliably than ever before. Consequently all kinds of motors now run as smooth as butter & react PERFECTLY LINEAR to throttle input commands.

You’ll also find a new IMU chip fitted - featuring a gyroscope, accelerometers and a compass, the VESC 6 MKV knows its 3D orientation in space, 3 axis acceleration values and directions. 

UAVCAN has been added to the firmware allowing to interact with commonly used flight controllers like the PIXHAWK ®* devices. An incredible 12,000 lines of code have been added for the new hardware releases. To make the VESC controller nearly indestructible, the low voltage rails were redesigned A-Z.

VESC-Tool software is now available as an Android™ compatible App, allowing you to configure your VESC or VESC controller array with only a few clicks. User specific PROFILES will let you change in between different setups with a single tap on the fly.

Using an original VESC 6 MKV controllermotor detection is now more precise than ever. Extreme low inductance (0.5 μHmotors are no issue! 

Parameters for gearing and wheel diameter have been added, allowing display of speed, Wh usage per distance travelled, precise battery indicator, current consumption, duty cycle and power. Beautiful self-adjusting analogue displays make the readings of all parameters very enjoyable.

What makes the original VESC hardware so special?

The original hardware is perfectly matched to work seamless withe VESC-Tool software code. Both, hardware and software, have been designed by the same engineer, knowing all critical detail.

TRAMPA BOARDS LTD has teamed up with the internationally renowned 'YODA of electronics' (Benjamin Vedder) to bring to the world the most advance electronic speed controllers ever to be produced! Benjamin's family name is Vedder & the V in the brand VESC represents this. VEDDERs Electronic Speed Controller! There have been many ESC's before, but now the VESC line of products officially exists, made to work seamless with the latest software developments. Benjamin is globally renowned for his incredible electronics and software skills. He has worked tirelessly for well over 7 years fine tuning preceding versions of the globally famous & Trade Marked VESC products & after teaming up with TRAMPA BOARDS Ltd the development of the VESC product line has taken him to his highest capability yet.

The TRAMPA VESC controllers  comes fitted as standard with TRAMPA's very own & very special Silicone Coated & TRAMPA logo'd cables which are made up of 1036 Strands of Highly Flexible Top quality German copper. These quality details ensure the maximum performance at all times. Attached To the premium copper cables are genuine Amass XT90s connectors one side & 4mm Gold Plated Bullet connectors the other. The VESC 6 MKIII is installed with a custom moulded Internal Silicone Seal & is neatly fitted into the Heat sink which is a Solid Block of CNC'd  6061T6  Aluminum, used for dispensing the heat and offering maximum protection, allowing easy fitting and maximum good looks!..

The VESC line of produces are the most powerful & impressive Electric Speed Controller Benjamin has ever envisioned! They are  arguably by far the best and most versatile Electronic Speed Controllers the world has ever seen!! E Boarding, E-Biking, Remote control of all kinds including Drones & Robotics and Camera equipment (as well as thousands of industrial & recreational applications) are all about to be revolutionized by using the VESC series of products that will all come to the market soon...

Using the a VESC controller in your TRAMPA BOARD setup (Regardless of which model) will allow you to add any battery up to 12s with 60V of peak voltage. This is the perfect limit to give you incredible performance from your electric TRAMPA motors or similar. Using the new VESC TOOL software, you will be able to fine tune your performances relevant to your application, where you will be able to calculate your top end speeds & approx distance to travel using different combinations of power & gearing settings. Beautiful!

VESC controllers comes to you ready to plug in & go! They are delivered to you in a very stylish precision cut 6061 T6 aluminum heat-sink housing which has the TRAMPA & VESC logo beautifully laser etched to its surface & for further splash proofing we have invested into another mould for additional exterior Silicone Sealing which is available as an accessory to purchase.

The performance of the TRAMPA VESC controllers, compared to preceding third party models, is light years ahead! This is demonstrated in the cost as cheap non effective clones are sold according to their price not their quality. If you want the best performance then stick to the original hardware source - it will save you a lot of money on the long run and is a guarantee for ultimate performance and max compatibility with future software releases.

Our VESC controllers are being configured with the brand new Open Source, GPL V3 licensed VESC®-Tool Software:  www.vesc-project.com and on the Google Play Store™*.
The Open source, GPL V3 licensed VESC Firmware will come pre-installed on the device, allowing us to do extra testing of the device, prior to shipping.
This is the GPL V3 license contract for your reference:  www.vesc-project.com/GPL V3

Features

- Current and voltage measurement on all phases (three phase shunts)
- Adjustable current and voltage filters
- built in IMU chip (accelerometer, gyro)
- Regenerative braking
- Traction control (single and twin setup)
- Sensored or sensor less operation + hybrid mode
- Configurable RPM-, current-, voltage- and power limits
- Input source: PPM, Analog, NRF Nyko Kama Nunchuck
- Communication ports: USB, CAN,UAVCAN, UART
- Throttle curve and ramping for all input sources
- Separate throttle curves for acceleration and brakes
- Seamless 4-quadrant operation
- Motor revolution, amp hour, watt hour counting
- Display of speed, power, duty cycle, amp flow, estimated range and battery status on App
- Accumulated data from arrays of VESCs
- Real time data analysis and read out via communication ports
- Real time data analysis and read out via VESC-Tool APP or VESC-Tool software
- Adjustable protection against:

          -    Low input voltage
          -    High input voltage
          -    High motor current
          -    High input current
          -    High regenerative braking current (separate limits for the motor and the input)
          -    High RPM (separate limits for each direction).
          -    Over temperature (MOSFET and motor)

Technical Data Sheet

- Voltage: 11.1V – 60V (Safe for 3S to 12S LiPo).
- Voltage spikes may not exceed 60V!
- Current: Continuous 80A, Burst 120A.  Values depend on the temperature and air circulation around the device!
- 5V 1A output for external electronics
- 3.3V 0,5A output for external electronics
- Modes: DC, BLDC, FOC (sinusoidal)
- Supported sensors: ABI, HALL, AS5047

* Android is a trademark of Google LLC.
Google and Play Store are trademarks of Google LLC.
PIXHAWK is a trademark of Lorenz Meier

Original STREET Carver Motor Mount with Motor Axle Support kit - SINGLE

TRAMPA's STREET CARVER DRIVE TRAIN (SCDT) brings a complete new sensation to riding. Arguably the Mini Spring Trucks are a too wide for Old-Skool conventional Longboarders who still wish to push, we have herd them complaining about the wheel is in the way when they push and the steering is too loose for them, you have to remember the Street Carver was originally designed for steep down hill street runs where 'switch back carving' is required not pushing... BUT assemble it with either a Single or dare i suggest the insane Twin motor setup & Hey! you don't need to push any more!

& WOW! - Fitting a motor to your TRAMPA Street carve deck completely & utterly transforms any previous riding experience you may have ever experienced before! The resulting E-Street Carver Decks are like nothing thats ever been made before. We know they are expensive but it is genuinly utterly amazing & a totally revolutionary sensation which should not ever be compared to a traditional Longboard...

The STREET & URBAN CARVE DECKS are very much the same... the only difference between the complete decks are the wheels & Slave Pulleys used & to make the change between the two decks in particular the Hanger is assembled in a different direction relevant to the size of the wheel... The Axle in the Hanger is 'off set' so turning it around forwards or backwards changes the wheel base accordingly. Hanger facing inwards gives shorter deck & is for Street Carving requiring smaller longboard style wheels, Whilst hanger facing forwards give Longer Wheelbase  for URBAN Carving as the extra size for space accommodates the larger wheels...

TRAMPA’s amazing Carve Board drivetrains have been described as providing “A Whole New Riding Experience” – & that’s not wrong.
Suitable for STICKIESGUMMIES & URBAN TREAD wheels, TRAMPA’s completed Carve Boards feel & perform unlike anything else on the market.

The beauty of a Carve board is in the set up – or rather – how you set it up… One choice of parts creates a board capable of straight-line bombing at insane speeds. Another choice & it’s a board so buttery it can turn any corner on a dime.

CARVE DRIVETRAINS ARE AVAILABLE IN TWO MODELS:

ORIGINAL carve motor mounts use super strong 3k Twill Carbon Mounting panels & T6 Aluminium Truck Connectors to create a drive train with an amazing strength : weight ratio.
Different Carbon Mounting Panels are needed for mounting different wheels.

MKII carve motor mounts use an all-in-one TRUCK CONNECTOR & MOUNTING PANEL. CNC’d from a solid block of T6 Heat-treated Aluminium, the MkII Carver Motor Mount Connector Panel can withstand the knocks & pumps that come along when riding, while staying secure and aligned on the truck.

Carve board drivetrains are all available as Single or Twin Motor setups. Single motor boards are easier on the wallet, & will still hit the same eye-watering speeds as twin motors. Twin motors split the brunt of the work, so less chance of motors over-heating, & twice the grip - so if you’re looking for a board that’ll fly off the line, you’ve got to go twin!
Carve boards can fit any of the 118-160Kv 6364 DC Motors we offer. 118Kv Motors are the choice for particularly hilly areas, whereas 160Kv Motors will carry you to some insane speeds!

Being belt driven, the gear ratios can be fine tuned with a range of Motor & Slave pulleys.

Carve board drivetrains attach to MINI SPRING TRUCKS - TRAMPA’s most multifunctional steering system yet! Using offset axles, its possible to reverse the hangers - changing the wheelbase, ride-height and performance of the finished board – allowing different sized pulleys & wheels to be fitted.
12.5” wide with 9.525mm axles, available in;
INFINITY (817g).
VERTIGO (737g).
ULTIMATE (703g).

Measuring just 850mm in length, TRAMPA’s CARVER DECK is the perfect balance between being small enough to take on a bus, while still feeling substantial & stable under your feet at speed.

With 35° tips, Carve Decks have the same flex & ‘pop’ as TRAMPA’s MTB decks, making them the perfect ‘urban-board’ choice for Mountainboarders. Working in conjunction with Mini Spring

READ MORE...

Complete Deck Weight

35° Carve Deck 14 ply 15 ply 16 ply
Blank Deck Weight 2,200g 2,350g 2,500g
Component Weight 4,135g 4,135g 4,135g
Complete Deck Weight 6.3 kg 6.5 kg 6.6 kg

Component Weights

Custom MINI TRAMPA Trucks with Spring & Dampa's or BARRELS1,310g
TRAMPA STICKIES Longboard WHEELS 83 or 90mm x set of 4908g
TRAMPA R6-2RS STREET CARVE Bearings for 9.525mm Axles20g
Original STREET Carver Motor Mount with Motor Axle Support kit - SINGLE174g
Custom 6364 or Huge 6376 TRAMPA DC Motor with Filters & Fan790g
STICKIES Wheels 33T or 37T Slave Pulley Kit with 330x15mm Belt 127g
The Amazing TRAMPA VESC 6 MkV gives Maximum power!165g
BEAST Box options for MOUNTAINBOARDS 6 - 16Amp 553g
Complete Cable Kit for Bigger BEAST BOX & Single VESC 688g
Total component weight4,135g
Custom MINI TRAMPA Trucks with Spring & Dampa's or BARRELS
TRAMPA STICKIES Longboard WHEELS 83 or 90mm x set of 4
35° TRAMPA Carve Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Countersunk Bolt kit

Blank deck weight chart

35° Carve Deck 14 ply 15 ply 16 ply
Blank Deck Weight 2,200g 2,350g 2,500g
General Flex Rating firm stiff very stiff

This Electric Deck is constructed using the following components & parts...

1x 35º TRAMPA Carve Deck - SOLID or the amazing HOLYPRO
2x Custom MINI TRAMPA Trucks with Spring & Dampa's or BARRELS
1x TRAMPA Deluxe STICKIES Longboard Wheels with loads of Durometer options
1x Special 9.525mm ABEC7 Steel or super fast CERAMIC TRAMPA Bearings
1x Original Street Carve Aluminium Clamp with Carbon Motor Mount panel
1x Custom option of TRAMPA motor fitted with Stainless Steel mesh Filters
1x Street Carve Pulley kit with custom option 33(Speed) or 37(Torque) Tooth Slave pulley
1x Original TRAMPA VESC 6 gives total reliability & maximum performance
1x Custom option of BEAST Box, small for lightweight, large for range
1x XT-90-S Fused Battery Y Harness - 1036 strand TRAMPA Silicon coated cables
--------------------------------------------------------------------------

CUSTOM Boards by TRAMPA are sold to you Un-Assembled with the absolute bare minimum of compoents associated to it as standard. We do this to firstly keep the unit price down as low as possible & secondly so that Dudes that already have many of the items that come as standard with the LOADED board, (remotes, Bags, charger etc) so that these dudes they dont end up with 2 of basically the same thing... Many of our customers are smart minded with mechanical experience & are often very eager to make the final part of the assembly of the board themselves. By sending the board Semi-assembled means that a Luxury bag is not required for additional protection suring the shipping process, which menas the box we send the un-assembled items in is much smaller, using much less space in the lorry when shi[ing means the shipping is also sometimes considerably cheaper (Depends on the location)...  Making the assembly is not so difficult, any basic experience will of course help, but there are video manuals in the tab above & lets face it, if you ride your E-Mtb properly you will need to maintain it and this will inevitably mean sometime you have to take things apart, so by completeing the final part of assembly yourself means that you get to learn how the board really works and which parts would need more servicing than others, and just generally get a good understanding of the board all round.....

--------------------------------------------------------------------------

BATTERIES ARE NOT INCLUDED in the majority of the products that TRAMPA sells. Batteries are expensive to purchase & can be deemed as dangerous by the shipping companies meaning they can be difficult to ship, especially internationally. 
We realised the battery shipping issue & decided to incoporate the problem into our product design, therefore now offering different  solutions. Although its a bit of a pain in the ass to have to purchase the cells seperatly, its far easier & less expensive on the shipping side of things & lets face it there are lots of companies specialising in the distribution of the cells all around the world all selling them much cheaper than what we could supply them to you, so in an attempt to side step the shipping problems & save you some cash for you to purchase them yourself locally.
SO,
Unless you are a UK customer, batteries will need to be purchased separately.
Batteries are in huge demand as there has been huge growth in all electrical products on the market, specially in the DIY side of things which is kind of where the TRAMPA BOARD position's intself in the market... So in our design we offer alternative solutions to be able to power your board using Li-Po of Li-Ion cells... 
There are links to the batteries that fit all the different boxes here & depending on how far you wish to go on a single charge will determine what cells you should fit.
As a guide & roughly speaking, 1000mAh (1Ah) is roughly the equivalent to 1 mile of average riding. This claim is very factor dependant & there are many factors determining the outcome such as wheel size, tyre pressure, road surface, weight of rider, rate of acceleration, top speed, cruise speed, the gradients the boards are being ridden on & of course the gearing selection of the rider.... Light weight riders will go further...
The Bigger the battery, the further you will go. We offer sized battery boxes. The Classic Monster Box is able to fit upto 22A Li-Po cells, the same box can fit TRAMPA's 21A Li-Ion Cell Pack. Classic MONSTER Boxes can be fitted to any size Mountainboard Deck, but if you want the furthest range, upto 35 MILES, then you need to fit the MASSIVE MONSTER Box. The Massive box is capable of fitting a 21700 12s7p cell pack & using the best 21700 cells out there is capable of 35Ah of range.
If you are a UK or Customer it is now possible to purchase the 18650 or 21700 cells for the Cell Packs, WITH CELLS, FITTED, direct from TRAMPA.

--------------------------------------------------------------------------

WARNING!!!
Mountainboarding, Longboarding, Electric Mountainboarding, Kiteboarding, Skateboarding, infact any version of boarding of any kind, is obviously dangerous. Accidents are deemed as 'Part of the fun' & are most likely inevitable.
To limit injury in the event of an accident, it is advised that you should wear as much protective clothing as you can bare to wear in an attempt to protect yourself from injury.
When miss-used, all kinds of bizarre & exceptional accidents  could & do happen, any of which could easily result in death. So always take care & never takes risks if you are not prepared to bare the consequences. You, the rider, is & are 100% fully responsible for your actions & or any accidents that may occur from riding any TRAMPA BOARD.

--------------------------------------------------------------------------

We advise that you never ride on the roads & most importantly, if you do ride on roads that you always ride well away from any traffic. Hitting a car, bus or Lorry whilst riding a skateboard will most likely result in death so we advise you dont do it. Anyway in most countries around the world it is still illegal to ride the devices we sell on the roads or highways & it has been herd of that crime busting Police from all around the world, do in fact have the power to even confiscate your device, so always be respectful when negotiating with the authorities over legislation of whats right or wrong & your right to ride the roads.... Here in the Uk we have no rights to ride on the roads so let that be a warning.

If there is no cycle path for you to ride then please choose to ride the sidewalk or pavement instead of the road & then take your time & steer well clear of anything thats moving... Give way to all pedestrians, most of them have ear ohones in & do not hear you coming so go steady and dont startle by wizzing past them closely & in particular when riding off road look out for, give priority too & give plenty of space to pass dog walkers as they often have an excited animal pleased to see you at the end of a tether, which of course can easily get tangled with you & your equipment & well, lets face it we don't want to hurt the doggie, upset the waker or hurt the rider & where always possible stay well away from all/any moving traffic. Always expect the worst scenario to happen in all cases as vehicle drivers will always win on who comes off best after a collision if competing to be in the same space at the same time, so we beg you to please never take a risk, its just not worth it.

--------------------------------------------------------------------------

Always ride with as much impact protect equipment as you can possibly bare to wear, accidents are inevitable & you are 100% responsible for your own safety at all time, so please check your board often for anything broken or loose & take care as you proceed on the board as these things are very powerful, dangerous in the wrong hands....!!!

What Ply deck do you require...?
What Ply deck do you require...?

8.5-69 Original 14ply SOLID Carve - FIRM
8.5-69 Original 14ply SOLID Carve - FIRM

8.5-69 Original 15ply SOLID Carve - STIFF
8.5-69 Original 15ply SOLID Carve - STIFF

8.5-69 Original 16ply SOLID Carve - STIFFEST
8.5-69 Original 16ply SOLID Carve - STIFFEST

8.5-69 Original 14ply HOLYPRO Carve - FIRM (+£25)
8.5-69 Original 14ply HOLYPRO Carve - FIRM (+£25)

8.5-69 Original 15ply HOLYPRO Carve - STIFF (+£25)
8.5-69 Original 15ply HOLYPRO Carve - STIFF (+£25)

8.5-69 Original 16ply HOLYPRO Carve - STIFFEST (+£25)
8.5-69 Original 16ply HOLYPRO Carve - STIFFEST (+£25)

Do you want INFINITY, VERTIGO or ULTIMATE Trucks?
Do you want INFINITY, VERTIGO or ULTIMATE Trucks?

Mini INFINITY Hanger - 9.525mm SOLID axles
Mini INFINITY Hanger - 9.525mm SOLID axles

Mini VERTIGO Hanger - 9.525mm HOLLOW Axles (+£20)
Mini VERTIGO Hanger - 9.525mm HOLLOW Axles (+£20)

Mini ULTIMATE Hanger - 9.525mm TITANIUM Axles (+£60)
Mini ULTIMATE Hanger - 9.525mm TITANIUM Axles (+£60)

What Size STICKIES Longboard wheels do you want?
What Size STICKIES Longboard wheels do you want?

83mm STICKIES Longboard Wheels

90mm STICKIES Longboard Wheels (+£10)

Quantity required:
We have enough parts to make…  
From £700 - each

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......


 

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon