TRAMPA's 9.525mm URBAN CARVER Bearings are very special, This Bearing uses an IMPERIAL internal measurement of 3/8ths of an inch (Which when converted to metric is 9.525mm) & a METRIC External measrement of 28mm. The Bearing needs a housing depth of 8mm to seat correctly & will perfectly fit into any of the 6, 7 or 8 Inch TRAMPA HYPA or SUPERSTAR hubs / wheels onto trucks with 9.525mm (3/8ths of an Inch) axles without the need for additional bearing reducer sleeves to convert regular ATB 12mm bearings down to 9.525mm.
This spesial size of bearing is officially known as 16100 2RS. 16100 tells you the Bearings dimensions whilst 2RS means the bearing has 2 Removable Shields. The Removable Rubber Seals are contactless (friction free) & are inserted into the Outer raceway whilst in contact with the inner raceway, protecting the single row of lubricated ball bearings housed within the enclosed raceways from the ingress of moisture, dust & dirt, retaining the pre-filled grease within the bearing and maintaining maxium performance to the board & rider for as long as possible. The rubber coated sidewalls are embossed with the TRAMPA logo proving Top Quality!
TRAMPA's precision made Urban Carve bearings are polished to an internationally recognised ABEC 5 quality. (ABEC 3-5 is recognised as the industry standard). ABEC 5 polishing gives you a super smooth / super fast ride which prolonges top end roll speeds.
TRAMPA's URBAN Carveboard bearing sets are supplied with varying sizes of Bearing Support Spacers. The spacers job is to fit between the bearings in the wheel to support the heavy loads gained through the center of the bearing centre, the centre point needs a strong connection. The spacer maintains best performance to the user for as long as possible. From time to time it is good practice for you to exchange your spacers to ensure maximum performance at all times.
TRAMPA's M4 x 35mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This Bolt is used to assemble the TRAMPA HYPA HUBS. The socket capped head of the Bolt fits neatly into the Bolt housing of the HYPA HUB marrying into the M4 nut located in the housing on the other side of the hub.
Weighing just 3 grams each these bolts are very lightweight. They look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.
You will need a 3mm Allen Key to tighten & loosen the Nuts & Bolts from the hub. Ensure all your Nuts & Bolts are tight before riding!
TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush.
Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!
Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.
This is a 350mm long x 15mm wide High Torque Drive (HTD) Re-enforced Rubber Belt, which has 5mm Tooth Spacing (5M). It is a High Power rated (HP) TRANSMISSON BELT made by the world famous German Brand called STRONGBELT. This one is used to transfer the power from the Motor & Motor Pulley into power at the rear wheels of a TRAMPA Electric Street Carver
TRAMPA opted to set a new standard in E-Skating, becoming the first in the world to fit to all of the E-Boards in its range, a 15mm wide TRANSMISSON BELT as standard! Our standard 15mm belt is almost double the width of nearly all other E-Sk8's out there, they tend to use a flimsy off the shelf 8/9mm transmission belts which can be prone to stretch, slip & ultimately snap.
Using a re-enforced 15mm wide High Power Belt reduces stretch, eliminates slip & as a consequence provides a constantly smooth whilst incredibly intuitive power delivery direct to the rear Drive Wheels of your board. When accelerating or engine breaking (KERS), even from a standing start the STRONGBELT power is smooth & does not slip, or strain the motor, it does a damn gooood job!.....
STRONGBELT, as their name suggests, is a heavy industry brand that usually supplies the likes of Train manufacturers, where serious levels of quality with no excuses on failure are expected from the product as standard, as failure for such an item is serious as the consequences may result in death! STRONGBELT weave KEVLAR into their Pulley Belts, Kevlar is one of the strongest fibers known to man, its often added into materials to gain extra strength.... STRONGBELT have the best reputation in the Power Transmission Industry. These extra quality details in the production of our electronic motor drives, provides the maximum responsiveness achievable whilst maintaining a super smooth power delivery to the rider at all times.
Made from top quality T6 Heat-Treated Aluminum, this motor mount connector slides snuggly over TRAMPA’s ATB & MINI SPRING Trucks and securely holds the Drive Train in place - no matter what terrains and sharp turns you throw at it.
Held in place with 2x M8x16mm GRUB screws
TRAMPA's 44 Tooth Slave Pulley has been designed to be used specifically when connecting electric motors through the URBAN Motor Mounts when using the new & oversized, super grippy GUMMIES longboard style tyres. The Gummies Tyres are due out very soon & available on advanced sale now! Frank was un-able to design 1 pulley to fit both styles of TRAMPA hub, so this one will only work with HYPA hubs specifically.
The 44 Tooth Slave Pulley has been precision milled from super-light-weight & mega strong Heat Treated T6 Aluminum. The pulleys teeth stand 5mm tall, this is the same size teeth as that found on TRAMPA's Premium 15mm wide German made 'Strongbelt' & when the Strongbelts are wrapped around the pulleys, the belt fits so efficiently it has what we call HIGH TORQUE DRIVE (HTD). HTD insures all of the motors Torque is pushed through the pulleys into the wheels & when coupled with the amazing VESC 6 & 12s Battery power provides instant smooth unreal Power on tap to the rider!
This smaller sized 44 Tooth pulley is actually higher in gearing than the 66 tooth & therefore when fitted it increases the final drive (top Speed) compensating for the smaller sized final drive the wheel was originally intended to fit to... Gummies tyres only measure 125mm which are obviously smaller than 6.5, 7 & 8 inch wheel options we also offer so the Gummies Tyres love the extra gearing the 44 Tooth Brings :-)
TRAMPA's 44 Tooth Slave Pulley for HYPA hubs works in conjunction with all & any of the 13, 14 or 15 tooth Motor Pulley in the range. Changing your Motor Pulley will drastically alter the performance & characteristics of your ride... 13 Tooth motor Pulley is best for Hill Climbing whilst 15 Tooth Motor Pulley is best for high speed, 14 tooth motor Pulley will give you good all round performance...
To connect the 44 Tooth Pulley to the HYPA hubs you will need 6x M4x40mm Socket capped Bolts which screw throurgh the HYPA wheel assembly directly into the Pulley very neatly!
TRAMPA's 6 spoke HYPA Hub is the lightest, strongest injection moulded 8 inch hub / wheel on the market today. Produced using original DuPont ingredients & the very latest in injection moulding machinery, no quality expense is spared!! HYPA Hubs are so strong, during testing our Crash Test Dummies (i mean the Team Riders) frequently inflated their HYPA wheels well beyond 75psi with no problems to report!
HYPA Hubs are available in loads of coordinating colours all of which are TRAMPA embossed proving our top quality, so to avoid disappointment dont go buying imitations! Our top quality continues as the HYPA Hubs construction uses A4 (Marine Grade) Stainless Steel Nuts & Bolts which are guaranteed never to rust.
HYPA Hubs are compatible with all known 8 Inch Tyres on the market today.
TRAMPA’s very own & genuine ABEC rated Bearings push perfectly into the HYPA Hub, guaranteeing the fastest spin rate possible. Use 12mm bearings (12x28x8mm) for 12mm axles or you can use Bearing Reducer Sleeves to fit your existing 12mm bearings onto 10mm axles (9.52mm or 7/16ths inch axles). 9.52x28x8mm bearings also fit TRAMPA hubs to 9.52mm Skate Axles.
Bearings are supplied at a discounted price when purchased with a set of hubs...
2 x Bearings cost only £2.50 x 4 = £10 per set of 8 making a £5 saving per set!
Introducing TRAMPA's M4 (4mm Shaft) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M4 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts.
This Nut is used to fix to tighten to the M4 Socket Capped Bolts that hold the HYPA & SUPERSTAR hubs together. To fit the nuts M4 use an 8mm spanner or 8mm Ratchet Socket to turn the Nut onto the Bolt whilst holding the bolt with a 3mm Allen Key. Always ensure your Nuts & Bolts are tight before you ride!
x6 Required per hub
This special 9.525mm (id) x 13.52mm (od) x 18..2mm (long) Aluminium Spacer has two purposes - It is firstly known as a Bearing Support Spacer as this spacer fits between the Bearings of the HYPA hub when mounting the HYPA wheel onto 9.525mm (10mm) or 3/8ths of an inch Axles, & secondly this spacer is also known as the "WHEEL SUPPORT SPACER" as it is also used to position all the TRAMPA wheels into the correct position when mounting onto Spring Trucks with 9.525mm TITANIUM Axles.
TRAMPA's spacers are produced as one long tube. The Tube is Heat Treated gaining maximum strength, then CNC cut to the exact length for precision & problem free wheel mounting.....!
This tiny STEEL Shim Spacer is precision made to give maximum performance! It is used to hold the bearings in the perfect position & also to bridge tiny gaps on the axles, ensuring an accurate fit with NO rattles!
The Shim spacer slips onto the axle fitting either side of the Bearings when the wheel is being fitted onto 9.525mm Axles.
This tiny spacer positions the wheel perfectly on the axle, holding the Bearing in the best possible place to help achieve maximum spin rate for the wheel. Its little parts like these that suffer the most amount of abuse, especially when they are used in the harsh conditions that they are. Check from time to time they are in good order & possibly replacing them every now & then this good proactice will ensure your board stays in tip-top condition, always!
TRAMPA's new & AMAZING 125mm GUMMIES Tyres are a 'Revolution' in the boarding world ;-) The GUMMIES Wheels are so good its as if the Longboard wheel has just been re-invented! The Gummies Tyres fit too & transform the performance of both of TRAMPA's HYPA & SUPERSTAR off road wheels, converting them into Supersized Longboard style wheels & are a completely new sensation & divine dream to ride!
Being 125mm in Diameter the GUMMIES Tyres are much larger than any other Longboard wheel on the market, whilst using High Quality SUPERSOFT Urethane (75a) & the same 50mm wide surface contact as the TRAMPA Stickies Longboard wheels not only do the GUMMIES Tyres perform like their name suggest (When riding on fresh tarmac / asphalt - Hard Packed surfaces, the GUMMIES Tyres stick like 'XXXX to a blanket' allowing the most insane turns & carves that you would not believe were possible) BUT the Super Soft Ultra Premium Urethane we have used also allows the GUMMIES Wheels to glide over cracks in the pavement & smash through the small obstacles that often get in the way when cruising around town, potentially jamming up smaller sized longboard wheels which can be well scary when it happens!!
Boarding of all kinds has recently seen a massive revolution with many new riders coming on the scene adding electric motors & powerful batteries to their boards, you could say much of the equipment being used by other brands is just not up to the job, riding small wheels on high speed electric boards can be frightening and well when you hook up the TRAMPA GUMMIES wheels onto one of the new TRAMPA Electric Boards, the GUMMIES tyre performace comes into a whole new universe of riding experience that nobody ever knew existed before...!! All of TRAMPA's electric boards are all incredibly powerful, just the most un-real performance is experienced like nothing else ever.... Honest! Fitting a set of GUMMIES to 16 Inch wide ATB Spring Trucks in place of off road tyres converts your Mountainboard into a Street Monster, Racing around places like go-kart tracks will soon become the latest thing too do & we know the mega grippy GUMMIES tyres will become the #1 choice of all serious high speed riders.....
Currently on forward order, they will only available in BLACK 75a Soft premium Urethane which is the perfect colour to tie in with any Combination of HYPA or SUPERSTAR hub in the TRAMPA range.
The GUMMIES Tyres will only fit TRAMPA HYPA or SUPERSTAR hubs, which in turn fit to any of the TRAMPA Truck Steering Systems.
Diameter - 125mm
Width - 52mm
Surface contact - 50mm
Fits to - HYPA & SUPERSTAR Hubs (9.525mm or 12mm Bearings)
Fits to - All 9.525 or 12mm TRAMPA Axles with 34.2mm of clearance.
The amazing 125mm GUMMIES Tyres are a 'Revolution' in the world of boarding. The Gummies Tyres fit too & transform the performance of TRAMPA's HYPA, SUPERSTAR or MEGASTAR hubs, converting pneumatic wheels into Supersized Longboard-style wheels & giving a completely new boarding sensation!
The larger 125mm size allows GUMMIES Wheels to glide over cracks in the pavement & smash through smaller obstacles that can get in the way & jam up smaller sized wheels.
Using premium SUPERSOFT Urethane (75a) with 50mm of surface-contact, GUMMIES perform like their name suggest & stick to the streets like gum on asphalt - allowing the most insane turns & carves you wouldn’t believe possible.
The 44-tooth Slave Pulley was produced to work in harmony with GUMMIES & TRAMPA’s range of Belt-Drive Motor Mounts, giving the optimal amount of clearance between the pulley & the ground. GUMMIES tyres can fit to Electric Longboards, Carveboards & Urban Mountainboards.
Available in Black, Blue or Red.