This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

SILVER Center-Set MEGASTAR 8 Wheels with BLACK Spokes & 8 inch BLACK MUDPLUGGER Tyres

SILVER MEGASTAR Rims with BLACK Spokes & 8 Inch BLACK MUDPLUGGER Tyres CENTRE-SET MEGASTAR 8 Hub 3.75 x 2 Inch - SILVER Rim with BRONZE Spokes SILVER MEGASTAR Rims with BLACK Spokes & 8 Inch BLACK MUDPLUGGER Tyres TRAMPA MUD-PLUGGER 8 Inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs - BLACK SILVER MEGASTAR Rims with BLACK Spokes & 8 Inch BLACK MUDPLUGGER Tyres 8 Inch Re-enforced Inner Tube made by INNOVA - 200x50mm
RRP FROM
£65+

How to put a wheel on an Infinity or Vertigo truck

How to put a wheel on an Ultimate Truck

M4 x 40mm Socket Capped TORX Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 45mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special Bolt is specifically made for TRAMPA & is used to assemble the TRAMPA PHATLADZ HUBS. The socket capped head of the Bolt screws neatly though the Spokes & into the fixing point in the Rim, eventually screwing  into the M4 nut on the other side easly.

Weighing just 3 grams each, they are very lightweight, look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

M4 x 16mm TORX Socket Capped Head Bolt ISO 4762 Marine Grade Stainless Steel

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M4 Nyloc Nut - Marine Grade stainless steel Nylock Nut - Hub Nuts

Introducing TRAMPA's M4 (4mm Shaft) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M4 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to tighten to the M4 Socket Capped Bolts that hold the HYPA & SUPERSTAR hubs together. To fit the nuts M4 use an 8mm spanner or  8mm Ratchet Socket to turn the Nut onto the Bolt whilst holding the bolt with a 3mm Allen Key. Always ensure your Nuts & Bolts are tight before you ride!

8 Inch Inner Tube INNOVA 8x2 inch 200x50mm - fits 3.75 inch Rims & 8 inch tyres

INNOVA's Re-enforced 8 Inch inner tube measures 200mm x 50mm and will fit into all the of the 8 inch Tyres on the website. INNOVA's 8 Inch Inner Tube also fits into the tyres of all other brands measuring 8 Inches inflated.

Being made from slightly thicker rubber, this Inner Tube is slightly heavier than alternatives but this INNOVA Inner Tube will handle much higher than recommended inflation rates... Therefore this INNOVA inner tube is the ideal tube for heavier or Pro Riders seeking to achieve higher than recommended inflation pressures...

This INNOVA Inner tube will fit into all known 8 inch tyres as well as most ATB hubs on the market. It comes as expected with an anti dust valve cap! Punctures Suck! Its always possible to get a puncture in the environments we ride in, so always carry a spare if you don't want your day spoiling...

MEGASTAR 8 CS Rims Measure 3.75 x 2 Inch. The bearings are positioned CENTRE-SET & accept all 3.75 Rim Tyres - SILVER

It was hard to ever imagine that TRAMPA's SUPERSTAR hub could ever be improved upon - but that's just what we’ve gone’n’done! The Super Sexy MEGASTAR Rims are a PRO version of the already amazing SUPERSTAR Rim!

CNC Milled from a solid block of T6 aluminium, polished, anodised (in 10 different colours!) & logo-ed up for a pimp appearance - all of the various MEGASTAR Rims we offer fit the regular SUPERSTAR SPOKES, so if you already use Superstars & fancy an upgrade, you’ll only need to purchase the Rims to make the swap.


MEGASTAR Hubs can handle the highest inflation pressures of any small wheel on the market. Increasing inflation rates ultimately increases maximum roll speeds, making these hubs the perfect option for the insane among us!

MEGASTAR Rims have extra threaded bolt holes for wheel balancing purposes -  the extra holes allow you to screw in 2x extra M4x16mm Socket cap TORX Bolts directly opposite the valve - which in turn counter-balances, creating a smoother rotation &  faster spin rate!


Megastars are available in a variety of sizes, with different spoke/bearing positioning for a number of different applications!


CENTER-SET Bearing position, which is a direct aluminium replacement of the original plastic-injection Superstar rim. Keeping the bearings centrally-located within the hub leaves the wheelbase unchanged, for a nimble feeling & riding board.

Megastar 8 CENTRE SET RIMS fit all 3.75x2 inch Rim Tyres & Regular Superstar / Skinny BB-Star Spokes.


OFF-SET Bearing position moves the wheels further from your feet - widening the boards wheelbase, which in turn increases stability - perfect for large people & small Boards. Initially created in conjunction with narrower Truck Models (12-Fifties & Mini Spring Trucks) in order to grant clearance for bigger tyres or rear-mounted battery boxes.

Megastar 8 OFF SET RIMS fit all 3.75x2 inch Rim Tyres & Regular Superstar / Skinny BB-Star Spokes.

Megastar 9 OFF SET RIMS fit all 3.75x2.5 inch Rim Tyres & Regular Superstar / Phat BB-Star Spokes.


DEEP-DISH Rims are as pimp as it gets! These elongated rims both widen the wheelbase of a board as well as the contact patch of the tyres - improving both stability & grip! While also granting extra clearance for fitting larger tyres or rear-mounted battery boxes.
 

Megastar 8 DEEP DISH RIMS fit all 3.75/4 x 2.5 inch Rim Tyres & Regular Superstar / Skinny BB-Star Spokes.

Megastar 9 DEEP DISH RIMS fit all 3.75/4 x 3 inch Rim Tyres & Regular Superstar / Skinny BB-Star Spokes.


The CENTER SET & OFF SET (3.75 x 2 Inch) MEGASTAR 8 HUBs fit ANY of the tyres in TRAMPA's range up to 8 inches in Diameter - including the 5 Inch Gummies tyres, 6.5 Inch URBAN Treads, 7 Inch Inline tyres & ANY 8 inch tyre option.

The DEEP DISH (3.75/4 x 2.5 Inch) MEGASTAR 8 HUB fits most tyres in TRAMPA's range up to 8 inches in Diameter, widening the tread & increasing the contact patch - including 6.5 Inch URBAN Treads, 7 Inch Inline Tyres & ANY 8 inch Tyre option.

The OFF SET & DEEP DISH (3.75/4 x 2.5/3 Inch) MEGASTAR 9 HUBs fit most of the tyres in the TRAMPA product Range up to 10 inches in Diameter, widening the tread & increasing the contact patch - including the 6.5 Inch URBAN Treads, 7 Inch Inline Tyres & ANY 8, 9 or 10  inch tyre options TRAMPA offers.


TRAMPA's REGULAR SUPERSTAR SPOKES are made from Extruded 6061 Aluminum (Super Strength Aero-grade quality) & comes in a range of colours to satisfy your taste.
TRAMPA’s new BB STAR Spokes are as lush as it gets - CNC’d from T6 Aluminium, available in two models - SKINNY (fits ALL MEGASTAR rims) or PHAT (fits OFF SET MEGASTAR 9 ONLY).

The MEGASTAR's hub construction is held together by using 5x Socket cap M4 x 40mm A4 (Marine Grade) Stainless Steel Nuts & Bolts that'll never rust on you!

Further pimp up your Megastar hubs with M4 Socket Cap spacers - anodised in 10 colours!

TRAMPA's MEGASTAR Hubs can be used in conjunction with any of the Pulleys that fit to SUPERSTAR hubs.

It's possible to fit any Bearing size TRAMPA offers into MEGASTAR Rims. As Standard the Superstar / Megastar spokes accept Mountainboard bearings for 12mm Axles - these bearings can be fitted with Reducer Sleeves that allow the hub to fit to 9.525mm Axles. If you use the Special Spoke Support Spacer into the assembly of the hub, you can fit to 8mm Longboard Axles - where hundreds of top quality bearing options are available to choose from.

BRONZE Anodised CLASSIC 5 SPOKE - Extruded T6 Aluminum Heat treated & CNC Precision milled fits all SUPERSTAR & MEGASTAR Wheels

TRAMPA SPOKES fit all SUPERSTAR & MEGASTAR Hubs. TRAMPA's Spokes are produced using the finest 6061 'Aero-Grade' Aluminum, which to maximise strength & performance are produced with the use of an Extrusion Die, which means TRAMPA spokes are made in one continuous piece before being sliced like bread to the required thickness. Before being sliced the extruded profile is T6 Heat Treated making the resulting Alloy extremely strong

Once sliced the Raw Spokes are sent to the CNC machine to mill out the bearing housing perfectly. Before being anodised the spokes are bead polished which not only gives a top quality finish but also removes all & any sharp edges, then finally sent away to the Anodisers to have the relevant striking colours added for top surface protection.

Check your spoke support spacers, O-Rings and hardware are in good condition when changing spokes & ensure all of your nuts & bolts are tight before you ride!

CUSTOM Spoke Support spacer - Installing a Spoke Support Conversin Spacer allowsyou to fit SUPERSTAR or MEGASTAR hubs to 9.525mm & 8mm Axles such as Evolve, Boosted & many others

This is the TRAMPA SUPERSTAR Spoke Support Spacer. It is used to gain extra strength for the SUPERSTAR wheel design by adding support to the Aluminum Spokes when the wheel is being used under high inflated pressures...

Precision injection moulded, using original DuPont materials, this Spacer provides essential support for the Spokes in the Superstar hubs. There is a Deep Shelf on the Rim of the Spacer which pushes into the internal side of the Spoke, positioning the Spacer/spoke perfectly for assembly. The thick plastic ensures a very strong support platform maximising Bearing support & spin rate always....

Ensure all your nuts & bolts are tight before riding!!

TRAMPA MUD-PLUGGER 8 Inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs - BLACK

TRAMPA's 8 Inch MUD-PLUGGER Tyre is a super advanced & incredibly lightweight tyre that fits all the 3.75 inch hubs on the market. It is the perfect tyre choice when your when riding in the worst of conditions, seeking the maximum grip possible!! 

Measuring 8x 2 Inch or 200mm x 50mm with a 3.75 Inch Rim,  the MUD-PLUGGER tyre has a box shaped construction, whilst the 2PR 'soft compound' rubber coating has an aggressive & well spread tread pattern that see's 'Grip on top of Grip'. Making the Mud-Plugger tyre 'Box shaped', having much straighter sides for example compared to the kind of Ballon shape of the 8 inch ALPHA tyre, allows for much more 'Surface Contact' resulting in much more 'Traction' for the user.

Mud-Plugger tyres also have a 'Wide Center Bead' allowing good top end roll speeds but as it is so Deep Grooved (5mm at the deepest) & very 'knobbily' around its sides to cut through the deepest of mud, suggests the appearance of the TRAMPA Mud-Plugger tyre works best in really bad conditions more than straight line speed on Hard packed surfaces!

TRAMPA's 8 Inch Mud-Plugger tyre has 3.75 inch Steel Bands molded into rims of the tyre, therefore the 8 Inch Mud-Plugger tire will fit onto all 3.75 inch hubs & 3.75/4 inch hubs currently on the market.

To enhance grip capabilities to the max the Mud-Plugger Tyre is manufactured using a Soft Compound '2PR rubber' wrapped around whats known as a High TPI (Threads per Inch) construction. A High TPI results in a super lightweight, very supple yet strengthened construction that further enhances grip & is more resistant to punctures. High TPI is applied to all top quality bicycle tyres. 

Having invested into professional testing at the factory & using our own TRAMPA hubs to make the testing, the factory have given this tyre a recommended maximum inflation pressure of 65psi (BUT ONLY WHEN FITTED TO TRAMPA HUBS) which is much more than any other brand & testament to the design & superior strength of the TRAMPA HUBs! Its true, the more you inflate your tyres the faster you will roll but these are off road tyres & so its not always good to have high inflation! Over inflation of your tyres may cause an explosion which could cause serious injury to yourself, however running your tyres as low as 20-25psi (depending on how much you weigh and how you ride etc) is more likely to give you the best grip when riding in the soft stuff....

TRAMPA's 8 Inch wheels now come with a few options but is predominantly tuned to give MAX efficiency when connected in the Motor Setup of a TRAMPA Electric decks, using a 14 tooth Motor Pulley accompanied with an 66 Tooth Slave Pulley. This combination is best all round gearing when using TRAMPA Electric MountainBoards - 
 
--------------------------------------

5 Spoke, 8 Inch tyre sized Wheels can also fit the 76 Tooth Pulleys... Fitting the 76 Tooth pulleys increases the Torque & Acceleration of the board incredibly, but also trims off your top speed as consequence...
 
--------------------------------------

.
1x MEGASTAR 8 CS Rims 3.75x 2 Inch - SILVER
2x CLASSIC 5 Spoke - BRONZE
1x CUSTOM Spoke Support spacer
5x M4 x 40 Socket Cap TORX Bolt
5x M4 Nut - Marine Grade Stainless steel Nylock Nut
2x M4 x 16 Socket Cap TORX Bolt
1x TRAMPA MUD-PLUGGER 8 Inch Tyre 3.75x 2x 8 - BLACK
1x 8 Inch Inner Tube - INNOVA
Recommended Tyre Inflation from 40 - 100psi
Weight: 717g
What Colour CENTRE-SET MEGASTAR 8 Rim do you want?
What Colour CENTRE-SET MEGASTAR 8 Rim do you want?

CENTRE-SET MEGASTAR 8 Rim - BLACK
CENTRE-SET MEGASTAR 8 Rim - BLACK

CENTRE-SET MEGASTAR 8 Rim - BLUE
CENTRE-SET MEGASTAR 8 Rim - BLUE

CENTRE-SET MEGASTAR 8 Rim - BRONZE
CENTRE-SET MEGASTAR 8 Rim - BRONZE

CENTRE-SET MEGASTAR 8 Rim - GOLD
CENTRE-SET MEGASTAR 8 Rim - GOLD

CENTRE-SET MEGASTAR 8 Rim - GREEN
CENTRE-SET MEGASTAR 8 Rim - GREEN

CENTRE-SET MEGASTAR 8 Rim - GUNMETAL
CENTRE-SET MEGASTAR 8 Rim - GUNMETAL

CENTRE-SET MEGASTAR 8 Rim - PINK
CENTRE-SET MEGASTAR 8 Rim - PINK

CENTRE-SET MEGASTAR 8 Rim - POLISHED
CENTRE-SET MEGASTAR 8 Rim - POLISHED

CENTRE-SET MEGASTAR 8 Rim - PURPLE
CENTRE-SET MEGASTAR 8 Rim - PURPLE

CENTRE-SET MEGASTAR 8 Rim - RED
CENTRE-SET MEGASTAR 8 Rim - RED

CENTRE-SET MEGASTAR 8 Rim - SILVER
CENTRE-SET MEGASTAR 8 Rim - SILVER

Quantity required:
We have enough parts to make…  
RRP FROM £65 - per wheel

Excluding VAT
HCC: 9503001000

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon