This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

Original URBAN Mountainboard Pulley Kit with 66 Tooth Slave & 460mm x 15mm Belt for 8 Inch Wheels

Original URBAN Mountainboard Pulley Kit with 66 Tooth Slave & 460mm x 15mm Belt for 8 Inch Wheels Custom 15mm wide Motor Pulley 13, 14 or 15 tooth M4 x 4mm Grub Screw M4 x 4mm Motor Pulley Grub Screw - Connects the Motor Pulley onto the Motor Axle Shaft The KEYWAY connects between the Motor Pulley & the Motor Axle Shaft to eliminate slip under power 3x3x8mm M4 x 17mm Aluminium Threaded Hex Spacer Nut - Connects HYPA Wheels to Slave Pulleys M4 x 10mm TORX Dome/Button Headed Head Bolt DIN6912 Marine Grade Stainless Steel TORX 66 Tooth Slave Pulley - Fits 15mm Belts to megastar SUPERSTAR, HYPA & PRIMO Wheels on URBAN Motor Mounts M4 x 40mm Socket Capped Bolt - Marine Grade Stainless steel with locking paste 460 long x 15mm wide High Torque Drive (HTD) 5M (5mm Tooth Space) High Power (HP)  STRONGBELT for TRAMPA Mountainboards
RRP
£55
exc tax

M4 x 40mm Socket Capped Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 40mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special Bolt is specifically made for TRAMPA & is used to assemble the TRAMPA SUPERSTAR HUBS. The socket capped head of the Bolt screws neatly though the Spokes & into the fixing point in the Rim of the SUPERSTAR HUB eventually screwing  into the M4 nut on the other side easly.

Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

USED FOR CONNECTING:  

SUPERSTAR HUBS       
MEGASTAR HUBS       
PHATLADS HUBS

M4 x 4mm Grub Screw M4 x 4mm Motor Pulley Grub Screw - Connects the Motor Pulley onto the Motor Axle Shaft

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M4 x 10mm TORX Dome/Button Headed Head Bolt DIN6912 Marine Grade Stainless Steel TORX

TORX Screws are less likely to strip out when compared to a hex screw, because of the way the load is distributed and applied between the tool and the hardware. Because of this load distribution, the height of the head of the bolt can be reduced - making them nice & flush. 

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

460 long x 15mm wide High Torque Drive (HTD) 5M (5mm Tooth Space) High Power (HP) STRONGBELT for TRAMPA Mountainboards

This ia 460mm long x 15mm wide High Torque Drive (HTD) Re-enforced Rubber Belt, which has 5mm Tooth Spacing (5M). This Belt is High Power rated (HP) & arguably over engineered for our application as the belt is made in Germany by the world famous company called STRONGBELT, who usually supply into heavy industry public sector applications which demand much more stringent requirements of any electric skateboard! This belt is used to transfer the power from the Motor & Motor Pulley into power at the rear wheels of a TRAMPA Electric Mountainboard.

TRAMPA opted to set a new standard in E-Skating, becoming the first in the world to fit to all of its E-Boards, a 15mm wide TRANSMISSON BELT. Our standard 15mm belt is almost double the width of nearly all other E-Sk8's out there, they tend to use a flimsy off the shelf 9mm transmission belt which are prone to stretch, slip & ultimately snap. Using a re-enforced 15mm wide High Power Belt reduces stretch, eliminates slip & as a consequence provides a constantly smooth whilst incredibly intuitive power delivery direct to the rear Drive Wheels of your board. When accelerating or engine breaking (KERS), even from a standing start the STRONGBELT power is smooth & does not slip, or strain the motor, it does a damn gooood job!.....

STRONGBELT, as their name suggests, is a Heavy Industry German Brand that usually supplies the likes of Train manufacturers where serious levels of quality with no excuses on failure are expected from the product, as failure for such an item is serious & may result in death! STRONGBELT weave KEVLAR into their Pulley Belts, Kevlar is one of the strongest fibers known to man, its often added into materials to gain extra strength.... STRONGBELT have the best reputation in the Power Transmission Industry for NO stretching or snapping & we have high expectations from this quality item. 

These extra quality details in the production of our electronic motor drives, provides the maximum responsiveness achievable whilst maintaining a super smooth power delivery to the rider at all times. 

Custom 15mm wide Motor Pulley 13, 14 or 15 tooth

TRAMPA's 15mm wide 13-15 Tooth Motor Pulleys connect directly to the Motor Axle & are secured into position using a Magnetic Fixing Key & 4mm Locking Grub Screw.

These custom made Motor Pulley Wheels  fit 15mm wide STRONGBELTS, which should never stretch or break whilst at the same time providing a very smooth power delivery to the user - even from a standing start.

Choice of Aluminium or Black Steel. Aluminium Pulleys are perfect for those looking to save every gram possible on their board - Black Steel Pullys are heavier, but much harder wearing.

Changing your Motor Pulley &/or Drive pulley wheels will drastically change the performance of your ride... :-)

13 Tooth
Best performance for climbing steep inclines.

14 Tooth 
Best all-round performance

15 Tooth 
Best performance forreaching top speeds.

The KEYWAY connects between the Motor Pulley & the Motor Axle Shaft to eliminate slip under power 3x3x8mm

TRAMPA's Motor Axle Shaft to Pulley KEYWAY measures 3 x 3 x 8mm. It connects into the Motor Pulley when mounted onto the motor Axle Shaft & is used to center the pulley on the Axle & to assist in delivering all the power from the motor without slip! This KEYWAY will fit to all TRAMPA motors amongst others.

TRAMPA's Axle length measures 38.5mm (from motor housing to end of shaft) & has a Diameter of 8mm. The centre of the key (3 x 3 x 8mm) sits 16.70mm away from the Motor front. Front side of Motor to Center of Key! Deduct 4mm & you have the length from front side of motor to the start of key....

66 Tooth Slave Pulley - Fits 15mm Belts to megastar SUPERSTAR, HYPA & PRIMO Wheels on URBAN Motor Mounts

TRAMPA's 66 Tooth URBAN mount Slave Pulley fits to any of the HYPA, SUPERSTAR or PRIMO wheels in the TRAMPA product Range & are used when connecting electric motors to the URBAN Motor Mounts.

The 66 Tooth URBAN Slave Pulley has been precision milled from super-light-weight & mega strong Heat Treated T6 Aluminum. The pulleys teeth stand 5mm tall, this is the same size teeth as that found on TRAMPA's 15mm wide 'Strongbelt' & when TRAMPA's Premium Strongbelts are wrapped around the pulleys, using the belt tension facility to screw down & increase the tension on the belt the connection between the teeth & the belt becomes so efficient it has what we call HIGH TORQUE DRIVE (HTD)HTD ensures all of the motors Torque is forced through the pulleys to the wheels & when coupled with the amazing VESC 6 & 12s Battery power provides instant smooth unreal Power on tap to the rider!

With the use of some very special Threaded Hex Spacers & Socket capped Bolts the 66 Tooth URBAN Mount Slave Wheel connects directly into any of the GUMMIES, 6.5, 7 or 8 Inch SUPERSTAR or HYPA Wheels as well as into the PRIMO 3 spoke 9 Inch wheels to give a massive final drive... - 1 pulley, 3 uses, Amazing! :-)

TRAMPA's 66 tooth URBAN Mount Slave Wheel works in conjunction with all & any of the 13, 14 or 15 tooth Motor Pulley in the range. Changing your Motor Pulley will drastically alter the performance & characteristics of your ride... 13 Tooth is best for Hill Climbing whilst 15 Tooth is best for high speed, 14 tooth will give you all round performance...

To connect to HYPA hubs you'll need 6x 17x4mm Threaded Hex spacers
To connect to SUPERSTAR hubs you'll need 5x 15x4mm Threaded Hex spacers

To connect 6.5 & 7 Inch Wheels use 460x15mm Belt
To connect to 8 & 9 Inch Wheels use 475x15mm Belt.

M4 x 17mm Aluminium Threaded Hex Spacer Nut - Connects HYPA Wheels to Slave Pulleys

Used for connecting Slave Pulleys to HYPA wheels. 

x6 Required per hub

1x 20mm Steel Motor pulley Custom option 13, 14 or 15 Tooth
1x M4 x4mm Hardened BLACK Steel Grub Screw - Locks Motor Pinion on Axel
1x Motor Pulley M3 x3 x12mm Keyway for 2mm Pulley
6x Bolts for fixing HYPA Wheel to Slave Pulley
6x Pully mounting Spacer Nuts - excluded cost add attriburte
1x Slave Pulley for URBAN Carver & Longboard Mountainboard
6x Bolts for fixing 44 tooth Slave Pulley to Hypa hubs M4x40
1x 460 x 15mm wide 5mm (HTD) Mountainboard STRONGBELT - NO SLIP!
Weight: 222g
What size Motor Pulley you would like?
What size Motor Pulley you would like?

13 Tooth 15mm wide ALUMINIUM Motor Pulley - BEST Hill Climber
13 Tooth 15mm wide ALUMINIUM Motor Pulley - BEST Hill Climber

14 Tooth 15mm wide ALUMINIUM Motor Pulley - BEST All Round
14 Tooth 15mm wide ALUMINIUM Motor Pulley - BEST All Round

15 Tooth 15mm wide ALUMINIUM Motor Pulley - BEST Top Speed
15 Tooth 15mm wide ALUMINIUM Motor Pulley - BEST Top Speed

13 Tooth 15mm wide BLACK STEEL Motor Pulley - BEST Hill Climber
13 Tooth 15mm wide BLACK STEEL Motor Pulley - BEST Hill Climber

14 Tooth 15mm wide BLACK STEEL Motor Pulley - BEST All Round
14 Tooth 15mm wide BLACK STEEL Motor Pulley - BEST All Round

15 Tooth 15mm wide BLACK STEEL Motor Pulley - BEST Top Speed
15 Tooth 15mm wide BLACK STEEL Motor Pulley - BEST Top Speed

These 62 Tooth Slave Pulleys can be fitted to 6 spoke HYPA Wheels or 5 Spoke SUPERSTAR / MEGASTAR wheels. There is a slight difference in Space length required. Please tell us below which wheels you are fitting this kit to so we can send you the correct sized Stand Off / Hex Spacer Nuts & bolts to fit them to the wheels you may have...

Are you fitting this kit to 6 spoke HYPA or 5 spoke SUPERSTAR / MEGASTAR Wheels?
Are you fitting this kit to 6 spoke HYPA or 5 spoke SUPERSTAR / MEGASTAR Wheels?

Im connecting this kit to 6 spoke HYPA Wheels
Im connecting this kit to 6 spoke HYPA Wheels

Im connecting this kit to 5 spoke SUPERSTAR / MEGASTAR Wheels
Im connecting this kit to 5 spoke SUPERSTAR / MEGASTAR Wheels

Quantity required:
RRP £55 - per Kit

Excluding VAT

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon